GRIPHOLD® make, Heavy Duty, Screw Drive Adaptors, made from chrome vanadium steel (EN-47) with rust resistant black industrial finish.
GRIPHOLD® industrial tools are made from the heavy duty and higher torque applications.
They are made from high-grade materials, which have a high Torque bearing capacity as well as the impact applications.
They undergo a special Heat Treatment process and the stress is relieved of all components before Hardening is carried out.
The process of hardness is carried out in accordance with the IS Standards for every tools and testing is done on 100% basis.
The tempering process is given special attention.
Design and Hardness are strictly followed as per IS-Standards for Industrial Tools.
Torque/Load tests are carried out to confirm the quality of every batch as per IS-Standards.
Griphold Industrial Tools have industrial black finish due to application of phosphate process for rust resistance and non-pealing of surface coating, instead of chrome plating, which is the general practice among general purpose tools manufacturers.
The wear resistance of Griphold Industrial Tools is almost the double of the general-purpose tools which is due to special manufacturing process.
GRIPHOLD® make, Heavy Duty, Square Drive Adaptor, made from chrome vanadium steel (EN-47) with rust resistant black industrial finish.
GRIPHOLD® industrial tools are made from the heavy duty and higher torque applications.
They are made from high-grade materials, which have a high Torque bearing capacity as well as the impact applications.
They undergo a special Heat Treatment process and the stress is relieved of all components before Hardening is carried out.
The process of hardness is carried out in accordance with the IS Standards for every tools and testing is done on 100% basis.
The tempering process is given special attention. Design and Hardness are strictly followed as per IS-Standards for Industrial Tools.
Torque/Load tests are carried out to confirm the quality of every batch as per IS-Standards.
Griphold Industrial Tools have industrial black finish due to application of phosphate process for rust resistance and non-pealing of surface coating, instead of chrome plating, which is the general practice among general purpose tools manufacturers.
The wear resistance of Griphold Industrial Tools is almost the double of the general-purpose tools which is due to special manufacturing process.
GRIPHOLD® make, Heavy Duty, Hex Adapter (Allen Key Socket), in 3/8 Sq. Drive, made from chrome vanadium steel (EN-47) with rust resistant black industrial finish.
GRIPHOLD® industrial tools are made from the heavy duty and higher torque applications.
They are made from high-grade materials, which have a high Torque bearing capacity as well as the impact applications.
They undergo a special Heat Treatment process and the stress is relieved of all components before Hardening is carried out.
The process of hardness is carried out in accordance with the IS Standards for every tools and testing is done on 100% basis.
The tempering process is given special attention.
Design and Hardness are strictly followed as per IS-Standards for Industrial Tools.
Torque/Load tests are carried out to confirm the quality of every batch as per IS-Standards.
Griphold Industrial Tools have industrial black finish due to application of phosphate process for rust resistance and non-pealing of surface coating, instead of chrome plating, which is the general practice among general purpose tools manufacturers.
The wear resistance of Griphold Industrial Tools is almost the double of the general-purpose tools which is due to special manufacturing process.
GRIPHOLD® make, Heavy Duty, Hex Adapter (Allen Key Socket), in 1/2 Sq. Drive, made from chrome vanadium steel (EN-47) with rust resistant black industrial finish.
GRIPHOLD® industrial tools are made from the heavy duty and higher torque applications.
They are made from high-grade materials, which have a high Torque bearing capacity as well as the impact applications.
They undergo a special Heat Treatment process and the stress is relieved of all components before Hardening is carried out.
The process of hardness is carried out in accordance with the IS Standards for every tools and testing is done on 100% basis.
The tempering process is given special attention.
Design and Hardness are strictly followed as per IS-Standards for Industrial Tools.
Torque/Load tests are carried out to confirm the quality of every batch as per IS-Standards.
Griphold Industrial Tools have industrial black finish due to application of phosphate process for rust resistance and non-pealing of surface coating, instead of chrome plating, which is the general practice amopng general purpose tools manufacturers.
The wear resistance of Griphold Industrial Tools is almost the double of the general-purpose tools which is due to special manufacturing process.
GRIPHOLD® make, Heavy Duty, Hex Adapter (Allen Key Socket), in 1/2 Sq. Drive, made from chrome vanadium steel (EN-47) with rust resistant black industrial finish.
GRIPHOLD® industrial tools are made from the heavy duty and higher torque applications.
They are made from high-grade materials, which have a high Torque bearing capacity as well as the impact applications.
They undergo a special Heat Treatment process and the stress is relieved of all components before Hardening is carried out.
The process of hardness is carried out in accordance with the IS Standards for every tools and testing is done on 100% basis.
The tempering process is given special attention.
Design and Hardness are strictly followed as per IS-Standards for Industrial Tools.
Torque/Load tests are carried out to confirm the quality of every batch as per IS-Standards.
Griphold Industrial Tools have industrial black finish due to application of phosphate process for rust resistance and non-pealing of surface coating, instead of chrome plating, which is the general practice among general purpose tools manufacturers.
The wear resistance of Griphold Industrial Tools is almost the double of the general-purpose tools which is due to special manufacturing process.
The cranes are mounted on castors for easy portability.
They include a fixing device for a perfect stability and security when lifting loads.
These cranes have adjustable feet in width for saving space when transported from side to side.
As standard equipment, this range is supplied with pumps and chains with hook.
Smartly designed for easy carrying and exceptionally versatile due to compact dimensions when folded up.
Lifting capacity of 1000 kg and 2000 kg. frame of high resistance pipe structure.
For loads difficult to access, or where loads are to be lifted, in which actually working on the load itself in not practical, we recommend our EX jack series for operation with a hydraulic hand pump. Equipped with our one-hand precision cast safety toe.
GRIPHOLD® make, Heavy Duty, Reversible Ratchet Handle made from chrome vanadium steel (EN-47) with rust resistant black industrial finish.
GRIPHOLD® industrial tools are made from the heavy duty and higher torque applications.
They are made from high-grade materials, which have a high Torque bearing capacity as well as the impact applications.
They undergo a special Heat Treatment process and the stress is relieved of all components before Hardening is carried out.
The process of hardness is carried out in accordance with the IS Standards for every tools and testing is done on 100% basis.
The tempering process is given special attention.
Design and Hardness are strictly followed as per IS-Standards for Industrial Tools.
Torque/Load tests are carried out to confirm the quality of every batch as per IS-Standards.
Griphold Industrial Tools have industrial black finish due to application of phosphate process for rust resistance and non-pealing of surface coating, instead of chrome plating, which is the general practice among general purpose tools manufacturers.
The wear resistance of Griphold Industrial Tools is almost the double of the general-purpose tools which is due to special manufacturing process.
GRIPHOLD® make, Heavy Duty, Swivel Handle, made from chrome vanadium steel (EN-47) with rust resistant black industrial finish.
GRIPHOLD® industrial tools are made from the heavy duty and higher torque applications.
They are made from high-grade materials, which have a high Torque bearing capacity as well as the impact applications.
They undergo a special Heat Treatment process and the stress is relieved of all components before Hardening is carried out.
The process of hardness is carried out in accordance with the IS Standards for every tools and testing is done on 100% basis.
The tempering process is given special attention.
Design and Hardness are strictly followed as per IS-Standards for Industrial Tools.
Torque/Load tests are carried out to confirm the quality of every batch as per IS-Standards.
Griphold Industrial Tools have industrial black finish due to application of phosphate process for rust resistance and non-pealing of surface coating, instead of chrome plating, which is the general practice among general purpose tools manufacturers.
The wear resistance of Griphold Industrial Tools is almost the double of the general-purpose tools which is due to special manufacturing process.
GRIPHOLD® make, Heavy Duty, Angle/L-Handles, made from chrome vanadium steel (EN-47) with rust resistant black industrial finish.
GRIPHOLD® industrial tools are made from the heavy duty and higher torque applications.
They are made from high-grade materials, which have a high Torque bearing capacity as well as the impact applications.
They undergo a special Heat Treatment process and the stress is relieved of all components before Hardening is carried out.
The process of hardness is carried out in accordance with the IS Standards for every tools and testing is done on 100% basis.
The tempering process is given special attention.
Design and Hardness are strictly followed as per IS-Standards for Industrial Tools.
Torque/Load tests are carried out to confirm the quality of every batch as per IS-Standards.
Griphold Industrial Tools have industrial black finish due to application of phosphate process for rust resistance and non-pealing of surface coating, instead of chrome plating, which is the general practice among general purpose tools manufacturers.
The wear resistance of Griphold Industrial Tools is almost the double of the general-purpose tools which is due to special manufacturing process.
GRIPHOLD® make, Heavy Duty, Sliding T-Handles, made from chrome vanadium steel (EN-47) with rust resistant black industrial finish.
GRIPHOLD® industrial tools are made from the heavy duty and higher torque applications.
They are made from high-grade materials, which have a high Torque bearing capacity as well as the impact applications.
They undergo a special Heat Treatment process and the stress is relieved of all components before Hardening is carried out.
The process of hardness is carried out in accordance with the IS Standards for every tools and testing is done on 100% basis.
The tempering process is given special attention.
Design and Hardness are strictly followed as per IS-Standards for Industrial Tools.
Torque/Load tests are carried out to confirm the quality of every batch as per IS-Standards.
Griphold Industrial Tools have industrial black finish due to application of phosphate process for rust resistance and non-pealing of surface coating, instead of chrome plating, which is the general practice among general purpose tools manufacturers.
The wear resistance of Griphold Industrial Tools is almost the double of the general-purpose tools which is due to special manufacturing process.
Extremely low height for use Pancake Lock Nut Cylindersin confined areas.
Safety lock nut for mechanical load holding.
Overflow port functions as a stroke limiter.
Coupler and dust cap included on all models.
Single-acting, load return.
Optional special synthetic coating for improved corrosion resistance.
Precise hydraulic control allows fast, efficient and safe pulling.
High quality, forged steel components provide superior reliability and service.
Full set includes: Hollow cylinder, hand pump, hydraulic hose, pressure gauge and gauge adaptor.
Chuck Size: 3/8" (10 mm)
Free Speed: 2,300 rpm
Full cage gear
Weight: 2.86 lb (1.3 kg)
Length: 7-1/2" (190 mm)
GSA6104KL 3/8" Heavy Duty Reversible Drill
w/Keyless chuck
Chuck Size: 1/2" (13 mm)
Free Speed: 500 rpm
Planetary gear
Horse Power: 0.5 hp (0.372 kw)
Spindle thread: 3/8"-24
Weight: 4 lb (1.82 kg)
Length: 9-1/16" (230 mm)
GSA6113KL 1/2" Drill w/Keyless Chuck
GRIPHOLD® make, Heavy Duty Insert Socket, made from chrome vanadium steel ( EN-47 ) with rust resistant black industrial finish.
GRIPHOLD® industrial tools are made from the heavy duty and higher torque applications.
They are made from high-grade materials, which have a high Torque bearing capacity as well as the impact applications.
They undergo a special Heat Treatment process and the stress is relieved of all components before Hardening is carried out.
The process of hardness is carried out in accordance with the IS Standards for every tools and testing is done on 100% basis.
The tempering process is given special attention.
Design and Hardness are strictly followed as per IS-Standards for Industrial Tools.
Torque/Load tests are carried out to confirm the quality of every batch as per IS-Standards.
Griphold Industrial Tools have industrial black finish due to application of phosphate process for rust resistance and non-pealing of surface coating, instead of chrome plating, which is the general practice among general purpose tools manufacturers.
The wear resistance of Griphold Industrial Tools is almost the double of the general-purpose tools which is due to special manufacturing process.
GRIPHOLD® make, Heavy Duty, Double Hex Socket, in 3/4 Sq. Drive, made from chrome vanadium steel (EN-47) with rust resistant black industrial finish.
GRIPHOLD® industrial tools are made from the heavy duty and higher torque applications.
They are made from high-grade materials, which have a high Torque bearing capacity as well as the impact applications.
They undergo a special Heat Treatment process and the stress is relieved of all components before Hardening is carried out.
The process of hardness is carried out in accordance with the IS Standards for every tools and testing is done on 100% basis.
The tempering process is given special attention.
Design and Hardness are strictly followed as per IS-Standards for Industrial Tools.
Torque/Load tests are carried out to confirm the quality of every batch as per IS-Standards.
Griphold Industrial Tools have industrial black finish due to application of phosphate process for rust resistance and non-pealing of surface coating, instead of chrome plating, which is the general practice among general purpose tools manufacturers.
The wear resistance of Griphold Industrial Tools is almost the double of the general-purpose tools which is due to special manufacturing process.
GRIPHOLD® make, Heavy Duty, Single Hex Impact Socket, in 3/4 sq. drive made from chrome vanadium steel (EN-47) with rust resistant black industrial finish.
GRIPHOLD® industrial tools are made from the heavy duty and higher torque applications.
They are made from high-grade materials, which have a high Torque bearing capacity as well as the impact applications.
They undergo a special Heat Treatment process and the stress is relieved of all components before Hardening is carried out.
The process of hardness is carried out in accordance with the IS Standards for every tools and testing is done on 100% basis.
The tempering process is given special attention.
Design and Hardness are strictly followed as per IS-Standards for Industrial Tools.
Torque/Load tests are carried out to confirm the quality of every batch as per IS-Standards.
Griphold Industrial Tools have industrial black finish due to application of phosphate process for rust resistance and non-pealing of surface coating, instead of chrome plating, which is the general practice among general purpose tools manufacturers.
The wear resistance of Griphold Industrial Tools is almost the double of the general-purpose tools which is due to special manufacturing process.
GRIPHOLD® make, Heavy Duty, Double Hex Industrial Socket, in 1 Sq. Drive, made from chrome vanadium steel (EN-47) with rust resistant black industrial finish.
GRIPHOLD® industrial tools are made from the heavy duty and higher torque applications.
They are made from high-grade materials, which have a high Torque bearing capacity as well as the impact applications.
They undergo a special Heat Treatment process and the stress is relieved of all components before Hardening is carried out.
The process of hardness is carried out in accordance with the IS Standards for every tools and testing is done on 100% basis.
The tempering process is given special attention.
Design and Hardness are strictly followed as per IS-Standards for Industrial Tools.
Torque/Load tests are carried out to confirm the quality of every batch as per IS-Standards.
Griphold Industrial Tools have industrial black finish due to application of phosphate process for rust resistance and non-pealing of surface coating, instead of chrome plating, which is the general practice among general purpose tools manufacturers.
The wear resistance of Griphold Industrial Tools is almost the double of the general-purpose tools which is due to special manufacturing process.
GRIPHOLD® make, Heavy Duty, Single Hex Impact Socket, in 1 sq. drive made from chrome vanadium steel (EN-47) with rust resistant black industrial finish.
GRIPHOLD® industrial tools are made from the heavy duty and higher torque applications.
They are made from high-grade materials, which have a high Torque bearing capacity as well as the impact applications.
They undergo a special Heat Treatment process and the stress is relieved of all components before Hardening is carried out.
The process of hardness is carried out in accordance with the IS Standards for every tools and testing is done on 100% basis.
The tempering process is given special attention.
Design and Hardness are strictly followed as per IS-Standards for Industrial Tools. Torque/Load tests are carried out to confirm the quality of every batch as per IS-Standards.
Griphold Industrial Tools have industrial black finish due to application of phosphate process for rust resistance and non-pealing of surface coating, instead of chrome plating, which is the general practice among general purpose tools manufacturers.
The wear resistance of Griphold Industrial Tools is almost the double of the general-purpose tools which is due to special manufacturing process.
GRIPHOLD® make, Heavy Duty, Single Hex Impact Socket, in 1.1/2 sq. drive made from chrome vanadium steel (EN-47) with rust resistant black industrial finish.
GRIPHOLD® industrial tools are made from the heavy duty and higher torque applications.
They are made from high-grade materials, which have a high Torque bearing capacity as well as the impact applications.
They undergo a special Heat Treatment process and the stress is relieved of all components before Hardening is carried out.
The process of hardness is carried out in accordance with the IS Standards for every tools and testing is done on 100% basis.
The tempering process is given special attention.
Design and Hardness are strictly followed as per IS-Standards for Industrial Tools.
Torque/Load tests are carried out to confirm the quality of every batch as per IS-Standards.
Griphold Industrial Tools have industrial black finish due to application of phosphate process for rust resistance and non-pealing of surface coating, instead of chrome plating, which is the general practice among general purpose tools manufacturers.
The wear resistance of Griphold Industrial Tools is almost the double of the general-purpose tools which is due to special manufacturing process.
GRIPHOLD® make, Heavy Duty, Single Hex Impact Socket , in 1/2 sq. drive made from chrome vanadium steel (EN-47) with rust resistant black industrial finish.
GRIPHOLD® industrial tools are made from the heavy duty and higher torque applications.
They are made from high-grade materials, which have a high Torque bearing capacity as well as the impact applications.
They undergo a special Heat Treatment process and the stress is relieved of all components before Hardening is carried out.
The process of hardness is carried out in accordance with the IS Standards for every tools and testing is done on 100% basis.
The tempering process is given special attention.
Design and Hardness are strictly followed as per IS-Standards for Industrial Tools.
Torque/Load tests are carried out to confirm the quality of every batch as per IS-Standards.
Griphold Industrial Tools have industrial black finish due to application of phosphate process for rust resistance and non-pealing of surface coating, instead of chrome plating, which is the general practice among general purpose tools manufacturers.
The wear resistance of Griphold Industrial Tools is almost the double of the general-purpose tools which is due to special manufacturing process.
GRIPHOLD® make, Heavy Duty, Single Hex Impact Socket, in 2.1/2 sq. drive made from chrome vanadium steel (EN-47) with rust resistant black industrial finish.
GRIPHOLD® industrial tools are made from the heavy duty and higher torque applications.
They are made from high-grade materials, which have a high Torque bearing capacity as well as the impact applications.
They undergo a special Heat Treatment process and the stress is relieved of all components before Hardening is carried out.
The process of hardness is carried out in accordance with the IS Standards for every tools and testing is done on 100% basis.
The tempering process is given special attention.
Design and Hardness are strictly followed as per IS-Standards for Industrial Tools.
Torque/Load tests are carried out to confirm the quality of every batch as per IS-Standards.
Griphold Industrial Tools have industrial black finish due to application of phosphate process for rust resistance and non-pealing of surface coating, instead of chrome plating, which is the general practice amopng general purpose tools manufacturers.
The wear resistance of Griphold Industrial Tools is almost the double of the general-purpose tools which is due to special manufacturing process.
Hollow plunger design allows for both pull and push forces.
Single-acting, spring return.
Nickel-plated, floating center tube on models over 20 ton increases product life.
Baked enamel finish for increased corrosion resistance.
Collar threads for easy fixturing.
Relief valves prevent damage in case of over-pressurisation.
Baked surface can resist increased corrosion.
Double-acting for fast retract.
Nickel-plating, floating center tube increases product life.
Hollow plunger allows for both pull and push force.
All models with quick coupling and dust cap.
Plunger wiper reduces dust contamination for extending cylinder life.
-> Collar threads, plunger threads and base mounting holes in many models for the suitability of most applications.
-> Designed for use in all positions.
-> High strength alloy steel for durability.
-> Heavy duty return springs.
-> Corrosion resistant special painting.
-> Plunger wiper reduces dust particles contamination for extending cylinder life.
Griphold Make Hydraulic foot pump is suitable to power a wide range of cylinders and tools.
Alloy Steel Material, high strength, resistant corrosion and protected impact are suitable for variety of bad environment.
Two stage type pump.
Double acting pump.
Integral stop ring provides piston blow-out protection.
Baked enamel outside finish and plated pistons provide superior corrosion protection.
Interchangeable, hardened grooved saddles are standard.
Base mounting holes are standard on all models.
Double acting cylinders.
Collar threads, plunger threads and base mounting holes for easy fixtures.
Baked enamel finish for increased corrosion resistance.
Removable hardened saddles protect plunger during lifting and pressing.
Built-in safety valve prevents accidental over-pressurization.
CR-400 couplers included on all models.
Plunger wiper reduces contamination, extending cylinder life.
High Tonnage Cylinders.
Double-acting for push and pull.
Safety valve in retract side of cylinder helps to prevent damage in case of accidental over-pressurization.
Plunger wiper reduces contamination, extending cylinder life.
Baked enamel finish and plated pistons provide superior corrosion resistance.
Single-acting cylinders for use in all positions.
Rigid Aluminium alloy body.
50T, 100T and 150T cylinders with handles for easy handling.
The ring can avoid the plunger over-reach, it can bear the maximum top-rise capacity of the cylinder.
The cylinder with High-strength retract spring for quick retract.
Designed for use in all positions.
50T, 100T and 150T cylinders with handles for easy handling.
Built-in safety valve prevents accidental over-pressurization.
Removable hardened saddles protect plunger during lifting and pressing.
Plunger wiper reduces dust particles contamination, extending cylinder life.
Rigid Aluminium alloy body.
Griphold make, Toe jack are designed for lifting, handling objects or moving loads from a sufficient resistant location using toe or head of the jack.
Double Acting Cylinder.
Both Toe and Top can be use to lift the load.
Rigid alloy steel body.
Temperature Reach -20 degree to +60 degree.
Griphold Make Wedge Jack specially designed to create an initial opening in narrow gaps.
Double Acting Cylinder.
Rigid alloy steel body.
Rigid aluminium alloy cylinder.
Free Speed: 10,000 Nm.
Orbit: 3/16" (5 mm).
Weight: 1.69 lb (0.768 kg)
Length: 8-55/64" (225 mm)
GSA4009 w/6" vinyl face pad
GSA4010 3 IN 1 5" Random Orbital Sander w/hook face pad
GSA4011 3 IN 1 5" Random Orbital Sander w/vinyl face pad
GRSM-series, Flat-Jac cylinders.
Compact, flat design for use where most other cylinders will not fit.
Single-acting, spring return.
Baked enamel finish for corrosion resistance.
Hard chrome plated high quality steel plungers.
Grooved plunger ends require no saddle.
Light weight, low profile design for use in confined spaces.
Single-acting, spring return.
Plunger wiper reduces dust contamination for extending cylinder life.
Grooved plunger end with threaded holes for mounting tilt saddles.
Plated steel plungers.
Free Speed: 16,000 rpm
Pad size, diameter 3" (76mm), 4" (101mm), 5" (127 mm)
Weight: 2.6 lb (1.2 kg)
Length: 5-3/4" (146 mm)
Pneumatically operated.
Pressure range: 100 bar-5000 bar.
Maximum flow can reach 45 L/min.
Compress working medium is water and most chemical liquid.
No welding and explosion proof.
Small outside design, for saving space.
Carry handles for portability.
Titanium Aluminium Alloy body for light weight, corrosion resistance and high strength for all models except GP-121, GP-123, GP-462 and GP-464.
Professional choice for wide range of industrial applications.
Large oil capacities to power a wide range of cylinders and tools.
Two speed pumps provide fast pumping to meet the load of tools & cylinders.
Internal pressure relief valve for overload protection.
Built-in safety valve ensuring operating safety against overloading.
Air inlet pressure gauge provided to check consistency of air.
The Air Cylinder and Piston are made from Titanium Aluminium Alloy.
Air exhaust muffler for quiet operation.
Air and oil inlet filters for reduced risk of damage from contamination.
All air pumps are designed to be used with single acting cylinders.
Max Pressure : 2800 Bar
TITAL alloy space material, Light weight, high strength, resistant corrosion and protected impact are suitable for a variety of bad environment.
There are two velocities in action.
An automatic change-over valve with precision, low and high pressure is built inside.
During low pressure, a greater flow is provided to save the operating time so as to increase the working efficiency.
Built-in safety valve provides safe dual-protection.
Dual scale reading in abr and psi, all pressure sensing parts sealed and dampened by glycerine for long life.
Safe, simple, efficient and stainless steel structure can resist strong corrosion.
Pressure gauge adaptors.
Convenient for pressure gauge fitting to the system.
Male end into pump or cylinder pot, female end accepts hose or coupler, 3rd port is for gauge connection.
Free Speed: 26,000 rpm
Collet Size: 1/4" (6 mm)
Horse Power: 0.2 hp (0.15 kw)
Weight: 0.79 lb (0.36 kg)
Length: 5-1/4" (133 mm)
Free Speed: 22,000 rpm
Collet Size: 1/4" (6 mm)
Horse Power: 0.6 hp
Weight: 1.23 lb (0.56 kg)
Length: 5-5/8" (143 mm)
Front Exhaust
Single-acting.
Safety lock nut for mechanical load holding.
Special synthetic coating for improved corrosion resistance.
Overflow port functions as a stroke limiter.
Interchangeable, hardened grooved saddles are standard.
Plunger wiper reduces contamination, extending cylinder life.
GRIPHOLD hydraulic pin pusher is an equipment to assemble and disassemble elevator chain quickly and safely.
The equipment is working with a hydraulic jack connected with two links to push the pin of the elevator chain.
The equipment is supplied with the standard accessories of Hand pump, 3 meters hose, pressure gauge and gauge adapter of working pressure 700 bar.
Additional adapter plates to be provided to push the pins of different lengths.
GRIPHOLD® make, Heavy Duty, Singe Hex Socket, in 3/8 Sq. Drive, made from chrome vanadium (EN-47) steel with rust resistant black industrial finish.
GRIPHOLD® industrial tools are made from the heavy duty and higher torque applications.
They are made from high-grade materials, which have a high Torque bearing capacity as well as the impact applications.
They undergo a special Heat Treatment process and the stress is relieved of all components before Hardening is carried out.
The process of hardness is carried out in accordance with the IS Standards for every tools and testing is done on 100% basis.
The tempering process is given special attention.
Design and Hardness are strictly followed as per IS-Standards for Industrial Tools.
Torque/Load tests are carried out to confirm the quality of every batch as per IS-Standards.
Griphold Industrial Tools have industrial black finish due to application of phosphate process for rust resistance and non-pealing of surface coating, instead of chrome plating, which is the general practice among general purpose tools manufacturers.
The wear resistance of Griphold Industrial Tools is almost the double of the general-purpose tools which is due to special manufacturing process.
GRIPHOLD® make, Heavy Duty, Double Hex Socket, in 3/8 Sq. Drive, made from chrome vanadium (EN-47) steel with rust resistant black industrial finish.
GRIPHOLD® industrial tools are made from the heavy duty and higher torque applications.
They are made from high-grade materials, which have a high Torque bearing capacity as well as the impact applications.
They undergo a special Heat Treatment process and the stress is relieved of all components before Hardening is carried out.
The process of hardness is carried out in accordance with the IS Standards for every tools and testing is done on 100% basis.
The tempering process is given special attention.
Design and Hardness are strictly followed as per IS-Standards for Industrial Tools.
Torque/Load tests are carried out to confirm the quality of every batch as per IS-Standards.
Griphold Industrial Tools have industrial black finish due to application of phosphate process for rust resistance and non-pealing of surface coating, instead of chrome plating, which is the general practice among general purpose tools manufacturers.
The wear resistance of Griphold Industrial Tools is almost the double of the general-purpose tools which is due to special manufacturing process.
GRIPHOLD® make, Heavy Duty, Double Hex Socket, in ½ sq. drive made from chrome vanadium steel (EN-47) with rust resistant black industrial finish.
GRIPHOLD® industrial tools are made from the heavy duty and higher torque applications.
They are made from high-grade materials, which have a high Torque bearing capacity as well as the impact applications.
They undergo a special Heat Treatment process and the stress is relieved of all components before Hardening is carried out.
The process of hardness is carried out in accordance with the IS Standards for every tools and testing is done on 100% basis.
The tempering process is given special attention.
Design and Hardness are strictly followed as per IS-Standards for Industrial Tools.
Torque/Load tests are carried out to confirm the quality of every batch as per IS-Standards.
Griphold Industrial Tools have industrial black finish due to application of phosphate process for rust resistance and non-pealing of surface coating, instead of chrome plating, which is the general practice among general purpose tools manufacturers.
The wear resistance of Griphold Industrial Tools is almost the double of the general-purpose tools which is due to special manufacturing process.
3/8" high flow couplers, Max. working pressure: 700 bar, these couplers are the standard parts of most hydraulic cylinders (jacks) and other tools.
1/4" ultra-pressure quick couplers, Max. working pressure: 1500 bar.
It can be used for hydraulic torque wrench.
Hydraulic Hand Pallet truck is designed with 3 Position control handle, welded steel pump with safety overload and bypass system, top balanceable strengthened fork frame, solid steel.
GRIPHOLD - heavy duty torque multipliers, are supplied with a support arm as a standard version.
GRIPHOLD - heavy duty torque multipliers, provide safe, economic and problem-free operation.
They replace impact wrenches, pipe extensions and other insufficient methods.
They improve on-the-job safety and provide short assembly times.
ADVANTAGES:
(1) Permanently higher joint quality as compared to impact and hydraulic wrenches by continuous rotation of the square drive.
(2) GRIPHOLD GLD - the 360 degree rotating handle ensures comfortable operation and none of the reaction forces are transferred to the operator.
(3) GRIPHOLD GLS2 with fast gear for turning in and simple, quick switching to power gear (is used for applying final torque).
GRIPHOLD SPECIALS
(1) Simple 1-finger operation for right/left rotation, optional facility to enable the reaction to be locked in one position.
(2) Robust motor housing from cast aluminium with proven pneumatic drive.
(3) Proven high-performance gears, produced in a chip-free high-precision process produce high loads with low wear.
(4) GRIPHOLD GLS2 with uniquely high torque - 48,600 Nm.
(5) On demand with optional silencer levels to reduce the noise from the motor exhaust.
-> APPLICATIONS:
(1) Consistent torque accuracy in all international power supplies 100-253V / 45-66 Hz. Power max. 2000W, protection category.
(2) Precise shut-off torque at operation with voltage-controlled portable generators.
-> GRIPHOLD SPECIALS
(1) Models GEF/GEFW in version "plus" for high-quality bolting according to the torque/angle procedure.
(2) Innovative motor protection with automatic switch-off to secure the bolting quality.
(3) Smart processor-controlled switch-off electronics for consistently precise reproduction of the pre-selected torque.
(4) Extraordinarily robust motor housing of cast aluminium.
(5) Safe work in any weather (moisture,rain).
-> ADVANTAGES:
(1) Maintenance-free, low-wear, brushless synchronous motor with excellent efficiency.
(2) High motor speed, up to three times as fast as conventional electrical torque wrenches.
(3) The 360 degree rotating handle ensures comfortable operation and none of the reaction forces are transferred to the operator.
(a) Hydraulic Torque Wrench Pumps - Electric & Pneumatic
(1) Working pressure - 70 ~ 700 bar.
(2) The pressure can be adjusted precisely.
(3) 2-stage pump, quick retract and highly efficient.
(4) 2 to 8 oil output, 1 to 4 hydraulic wrenches can work simultaneously.
(5) Oil tank volume: 3.7 to 9.5 Ltr. capacity.
(6) Special twin hose with quick coupling.
(7) Can be operated by remote control.
(8) Cooling system inbuilt in specific models.
(9) Power Pack can be available with higher flow rate.
(10) Fan cooled heat exchanger optional can provide on request.
Specially developed for Torque Tightening and and Tearing of special bolts, which do not need a torque setting. The tool will tear the tail end of bolt after achieving the torque. This tool is widely used for tension control bolts in structural steel erection. The tool works with an electric connection of 230 volt 50/60hz. max. input power 1200 W.
GRIPHOLD® make, heavy duty Single Ended Straight Ring type Slugging Wrench, made from chrome vanadium steel (EN-47) with rust resistant black industrial finish.
GRIPHOLD® industrial tools are made from the heavy duty and higher torque applications.
They are made from high-grade materials, which have a high Torque bearing capacity as well as the impact applications.
They undergo a special Heat Treatment process and the stress is relieved of all components before Hardening is carried out.
The process of hardness is carried out in accordance with the IS Standards for every tools and testing is done on 100% basis.
The tempering process is given special attention.
Design and Hardness are strictly followed as per IS-Standards for Industrial Tools.
Torque/Load tests are carried out to confirm the quality of every batch as per IS-Standards.
Griphold Industrial Tools have industrial black finish due to application of phosphate process for rust resistance and non-pealing of surface coating, instead of chrome plating, which is the general practice among general purpose tools manufacturers.
The wear resistance of Griphold Industrial Tools is almost the double of the general-purpose tools which is due to special manufacturing process.
GRIPHOLD® make, Heavy Duty, Universal Joint, made from chrome vanadium steel (EN-47) with rust resistant black industrial finish.
GRIPHOLD® industrial tools are made from the heavy duty and higher torque applications.
They are made from high-grade materials, which have a high Torque bearing capacity as well as the impact applications.
They undergo a special Heat Treatment process and the stress is relieved of all components before Hardening is carried out.
The process of hardness is carried out in accordance with the IS Standards for every tools and testing is done on 100% basis.
The tempering process is given special attention.
Design and Hardness are strictly followed as per IS-Standards for Industrial Tools.
Torque/Load tests are carried out to confirm the quality of every batch as per IS-Standards.
Griphold Industrial Tools have industrial black finish due to application of phosphate process for rust resistance and non-pealing of surface coating, instead of chrome plating, which is the general practice among general purpose tools manufacturers.
The wear resistance of Griphold Industrial Tools is almost the double of the general-purpose tools which is due to special manufacturing process.
GRIPHOLD® make, Heavy Duty, Hex Drivers in ¼ sq. drive made from chrome vanadium steel ( EN- 47 ) with rust resistant black industrial finish.
GRIPHOLD® industrial tools are made from the heavy duty and higher torque applications.
They are made from high-grade materials, which have a high Torque bearing capacity as well as the impact applications.
They undergo a special Heat Treatment process and the stress is relieved of all components before Hardening is carried out.
The process of hardness is carried out in accordance with the IS Standards for every tools and testing is done on 100% basis.
The tempering process is given special attention.
Design and Hardness are strictly followed as per IS-Standards for Industrial Tools.
Torque/Load tests are carried out to confirm the quality of every batch as per IS-Standards.
Griphold Industrial Tools have industrial black finish due to application of phosphate process for rust resistance and non-pealing of surface coating, instead of chrome plating, which is the general practice among general purpose tools manufacturers.
The wear resistance of Griphold Industrial Tools is almost the double of the general-purpose tools which is due to special manufacturing process.
Three-arm union, self-centering, easy to use.
Claws of pullers are forged of high-strength alloy steel.
Mechanical pullers are available in 7 ton to 30 ton range.
Hydraulic pullers are available in 10 ton to 60 ton range.
Precise hydraulic control allows fast, efficient and safe pulling.
Built-in safety valve avoids overloading.
Available in 2 and 3 jaw design.
Pump, hoses and pullers are united to be the compact tool.
The quick nut can adjust the operating distance so as to save time and effort.
The central saddle rod can retract quickly.
The jaw hook and hook shelf are made of forged alloy steel with high strength and it can be used durably all through its life.
10,12,20 and 30 ton for your option.
The unique inner relief safety valve can prolong the life of the cylinder.
Supplied with a full hydraulic set including pump, hose, cylinder, gauge, gauge adaptor and wooden case.
All master puller sets include a Grip Puller, a Cross Bearing Puller, a Bearing Cup Puller and Bearing Puller Attachment.
High quality, forged steel components provide superior reliability and service.
Sets include speed crank and adjusting screw for fast contact to work before hydraulic pressure is applied.
Master pullers set is a combination of Bearing Pullers set & Grip puller set.
GRIPHOLD GMP Series electric power packs are suitable for variety of industrial applications like lifting, pushing, pulling, bending, pressing machines and widely used for hydraulic jacks.
These pumps are suitable for working pressure requirements of 700 Bar, available with different sizes of reservoirs, valve settings, flow rates, motor power and voltage.
These power packs are available for single acting and double acting applications.
Max. Torque: 2,500 ft-lb (3,400 Nm)
Free speed: 3,000 rpm.
Weight: 34.76 lb (15.8 kg)
Length: 17-53/64" (452 mm)
Side Exhaust
Twin Hammer mechanism.
1 PC-GSA2204 1/2" Impact Wrench
10PCS-Air Impact Socket
10, 12, 14, 17, 19, 21, 22, 23, 24, 27mm
1 PC-3" Extension Bar
1 PC-1/4" Mini Oiler
1 PC-Air Nipple
1 PC-4 mm Hex Wrench
1 PC-Blow Molded Case
Max. Torque: 30 ft-lb (40 Nm)
Free speed: 240 rpm.
Weight: 1.14 lb (0.52 kg)
Length: 6-1/2" (165 mm)
Front Exhaust
(1) Non-length dependent design.
(2) Alloy steel precision torsion drive.
(3) Dual scale.
(4) Dual direction.
(5) Memory follower needle on each wrench.
(6) Dial protected with steel guard.
(7) Ranges from 0 in.lb. to 2000 ft.lb.
(8) GRIPHOLD calibration certificate traceable to NPL supplied standard.
(9) Serial number hard marked on each wrench.
(10) 3% accuracy from 20-100% of range.
GRIPHOLD® make, Heavy Duty, Hex Drivers in ¼ sq. drive made from chrome vanadium steel ( EN- 47 ) with rust resistant black industrial finish.
GRIPHOLD® industrial tools are made from the heavy duty and higher torque applications.
They are made from high-grade materials, which have a high Torque bearing capacity as well as the impact applications.
They undergo a special Heat Treatment process and the stress is relieved of all components before Hardening is carried out.
The process of hardness is carried out in accordance with the IS Standards for every tools and testing is done on 100% basis.
The tempering process is given special attention.
Design and Hardness are strictly followed as per IS-Standards for Industrial Tools.
Torque/Load tests are carried out to confirm the quality of every batch as per IS-Standards.
Griphold Industrial Tools have industrial black finish due to application of phosphate process for rust resistance and non-pealing of surface coating, instead of chrome plating, which is the general practice among general purpose tools manufacturers.
The wear resistance of Griphold Industrial Tools is almost the double of the general-purpose tools which is due to special manufacturing process.
GRIPHOLD® make, Heavy Duty, Hex Drivers in ¼ sq. drive made from chrome vanadium steel ( EN- 47 ) with rust resistant black industrial finish.
GRIPHOLD® industrial tools are made from the heavy duty and higher torque applications.
They are made from high-grade materials, which have a high Torque bearing capacity as well as the impact applications.
They undergo a special Heat Treatment process and the stress is relieved of all components before Hardening is carried out.
The process of hardness is carried out in accordance with the IS Standards for every tools and testing is done on 100% basis.
The tempering process is given special attention.
Design and Hardness are strictly followed as per IS-Standards for Industrial Tools.
Torque/Load tests are carried out to confirm the quality of every batch as per IS-Standards.
Griphold Industrial Tools have industrial black finish due to application of phosphate process for rust resistance and non-pealing of surface coating, instead of chrome plating, which is the general practice among general purpose tools manufacturers.
The wear resistance of Griphold Industrial Tools is almost the double of the general-purpose tools which is due to special manufacturing process.
GRIPHOLD® make, Heavy Duty, Stud Tightener in 3/4 square drive made from chrome vanadium steel (EN-47) with rust resistant black industrial finish.
GRIPHOLD® industrial tools are made from the heavy duty and higher torque applications.
They are made from high-grade materials, which have a high Torque bearing capacity as well as the impact applications.
They undergo a special Heat Treatment process and the stress is relieved of all components before Hardening is carried out.
The process of hardness is carried out in accordance with the IS Standards for every tools and testing is done on 100% basis.
The tempering process is given special attention.
Design and Hardness are strictly followed as per IS-Standards for Industrial Tools.
Torque/Load tests are carried out to confirm the quality of every batch as per IS-Standards.
Griphold Industrial Tools have industrial black finish due to application of phosphate process for rust resistance and non-pealing of surface coating, instead of chrome plating, which is the general practice among general purpose tools manufacturers.
The wear resistance of Griphold Industrial Tools is almost the double of the general-purpose tools which is due to special manufacturing process.
GRIPHOLD® make, Heavy Duty, Crow Foot Wrench, in 3/4 sq. drive, made from chrome vanadium steel (EN-47) with rust resistant black industrial finish.
GRIPHOLD® industrial tools are made from the heavy duty and higher torque applications.
They are made from high-grade materials, which have a high Torque bearing capacity as well as the impact applications.
They undergo a special Heat Treatment process and the stress is relieved of all components before Hardening is carried out.
The process of hardness is carried out in accordance with the IS Standards for every tools and testing is done on 100% basis.
The tempering process is given special attention.
Design and Hardness are strictly followed as per IS-Standards for Industrial Tools.
Torque/Load tests are carried out to confirm the quality of every batch as per IS-Standards.
Griphold Industrial Tools have industrial black finish due to application of phosphate process for rust resistance and non-pealing of surface coating, instead of chrome plating, which is the general practice among general purpose tools manufacturers.
The wear resistance of Griphold Industrial Tools is almost the double of the general-purpose tools which is due to special manufacturing process.
GRIPHOLD® make, Heavy Duty, Crow Foot Wrench, in 1/2 sq. drive, made from chrome vanadium steel (EN-47) with rust resistant black industrial finish.
GRIPHOLD® industrial tools are made from the heavy duty and higher torque applications.
They are made from high-grade materials, which have a high Torque bearing capacity as well as the impact applications.
They undergo a special Heat Treatment process and the stress is relieved of all components before Hardening is carried out.
The process of hardness is carried out in accordance with the IS Standards for every tools and testing is done on 100% basis.
The tempering process is given special attention.
Design and Hardness are strictly followed as per IS-Standards for Industrial Tools.
Torque/Load tests are carried out to confirm the quality of every batch as per IS-Standards.
Griphold Industrial Tools have industrial black finish due to application of phosphate process for rust resistance and non-pealing of surface coating, instead of chrome plating, which is the general practice among general purpose tools manufacturers.
The wear resistance of Griphold Industrial Tools is almost the double of the general-purpose tools which is due to special manufacturing process.
-> Forged Steel Jaws and Handle for maximum strength.
-> Good quality flat link chain for good grip of pipe.
These special spanners have been developed for tightening and opening of Gear Case Bolts of the Electric Locomotives.
These special spanners have the following salient features:
1. The Spanners are with Ratchet Pawl Mechanisms.
2. The Spanners can be used to open and tighten the bolt with the help of Reverse and Forward Mechanism of the Ratchet System by changing the position of the pawl.
3. The Spanners are bi-hexagonal for easy gripping of the bolt head and both side open to facilitate working from both sides.
4. The body has been designed to suit the easy operationof the tool at the specified location.
5. Components of the tool have been hardened and tempered to ensure wear resistance and long life.
6. All components are made from chrome vanadium steel.
7. The spanners have been tested satisfactorily at a load of 200 Kgf. M.
-> GRIPHOLD heavy-duty tool box is made from compressed steel sheet of 18/20 gauges, painted in red, auto enamelled and oven baked.
-> It has small compartments and a tote tray.
-> The tool box has welded construction with a spot welded sturdy single handle across its length, for easy handling.
-> The lid is fitted with full piano type hinges, which are closely spot-welded.
-> The tool box is supplied with a sturdy padlock.
GBJ-Series Steel Bottle Jacks.
Low handle effort.
Automatic bypass port to prevent over-extension.
Wiper seal for extended life.
Chrome plating on both plungers.
Safety relief valve to prevent overload.
Fully servicable.
Cast pump linkage.
Cast beam.
Handle included on all models.
Compact and ergonomic design, easy to use.
Unique angled head design.
Single-acting, spring return cylinder.
Heavy duty chisels can be reground.
Maximum allowable Hardness of Split 44 HRC.
Tool suitable for SAE grade 2H Nuts.
Compact and ergonomic design, easy to use.
Unique angled head design.
No thread damage to bolts or studs.
Single-acting, spring return cylinder.
Chisels have been designed with three cutting edges for maximum life.
Maximum allowable Hardness of Split 44 HRC.
Tool suitable for SAE grade 2H nuts.
Maximum tool operating pressure 1500 bar.
For maintenance, commissioning, shutdowns, testing and valve change outs.
No need for hammers, chisels, slings or chain blocks.
Requires very small access gap of only 6 mm.
Both mechanical and hydraulic are available.
Compact and ergonomic design, easy to use.
Adjustable jaw widths from 70 mm to 216 mm for a wide range of applications.
Single-acting, spring return cylinders for fast trouble-free operation.
Compact and reliable.
Reduce the damage of the seals result from mishandling.
One specification can suit various specifications of bolts.
A groove is visible as the maximum piston extension is reached.
Ability to link number of tensioners together.
Detachable and interchangeable bridge components.
Maximum tool operating pressure 1500 bar.
Can match hand pump, electric pump.
Max Torque: 220 ft-lb(298 Nm)
Free speed: 10,000 rpm.
Weight: 3.3 lb (1.5 Kg)
Length 6-1/8" (155 mm)
Handle Exhaust
Pin clutch mechanism
Max Torque: 450 ft-lb (612 Nm)
Free Speed: 7,000 rpm.
Weight: 6 lb (2.7 Kg).
Length: 7-1/4 (184 mm)
Handle Exhaust
Twin hammer mechanism.
GRIPHOLD - heavy duty torque multipliers, are supplied with a support arm as a standard version.
GRIPHOLD - heavy duty torque multipliers, provide safe, economic and problem-free operation.
They replace impact wrenches, pipe extensions and other insufficient methods.
They improve on-the-job safety and provide short assembly times.
ADVANTAGES:
(1) Permanently higher joint quality as compared to impact and hydraulic wrenches by continuous rotation of the square drive.
(2) GRIPHOLD GLD - the 360 degree rotating handle ensures comfortable operation and none of the reaction forces are transferred to the operator.
(3) GRIPHOLD GLS2 with fast gear for turning in and simple, quick switching to power gear (is used for applying final torque).
GRIPHOLD SPECIALS
(1) Simple 1-finger operation for right/left rotation, optional facility to enable the reaction to be locked in one position.
(2) Robust motor housing from cast aluminium with proven pneumatic drive.
(3) Proven high-performance gears, produced in a chip-free high-precision process produce high loads with low wear.
(4) GRIPHOLD GLS2 with uniquely high torque - 48,600 Nm.
(5) On demand with optional silencer levels to reduce the noise from the motor exhaust.
-> APPLICATIONS:
(1) Consistent torque accuracy in all international power supplies 100-253V / 45-66 Hz. Power max. 2000W, protection category.
(2) Precise shut-off torque at operation with voltage-controlled portable generators.
-> GRIPHOLD SPECIALS
(1) Innovative motor protection with automatic switch-off to secure the bolting quality.
(2) Smart processor-controlled switch-off electronics for consistently precise reproduction of the pre-selected torque.
(3) Angle-drive with optimized efficiency and great running characteristics.
(4) Extraordinarily robust motor housing of cast aluminium.
(5) Repeat shut off accuracy +/-3% for the same bolting application.
-> ADVANTAGES:
(1) Maintenance-free, low-wear, brushless synchronous motor with excellent efficiency.
(2) Simple 1-finger operation for quick, comfortable work.
(3) The 360 degree rotating handle ensures comfortable operation and none of the reaction forces are transferred to the operator.
A torque multiplier is a tool used to provide a mechanical advantage in applying torque to turn bolts, nuts or other items designed to be actuated by application of torque, such as the actuation of valves, particularly where there are relatively high torque requirements.
(1) Non-length dependent design.
(2) Alloy steel precision torsion drive.
(3) Dual scale.
(4) Dual direction.
(5) Memory follower needle on each wrench.
(6) Dial protected with steel guard.
(7) Ranges from 0 in.lb. to 2000 ft.lb.
(8) GRIPHOLD calibration certificate traceable to NPL supplied standard.
(9) Serial number hard marked on each wrench.
(10) 3% accuracy from 20-100% of range.
-> APPLICATIONS:
(1) Consistent torque accuracy in all international power supplies 100-253V / 45-66 Hz. Power max. 2000W, protection category.
(2) Precise shut-off torque at operation with voltage-controlled portable generators.
-> GRIPHOLD SPECIALS
(1) Models GFCip/GCWip in version "plus" for high-quality bolting according to the torque/angle procedure.
(2) Innovative motor protection with automatic switch-off to secure the bolting quality.
(3) Smart processor-controlled switch-off electronics for consistently precise reproduction of the pre-selected torque.
(4) Extraordinarily robust motor housing of cast aluminium.
-> ADVANTAGES:
(1) Safe work in any weather (moisture,rain).
(2) Maintenance-free, low-wear, brushless synchronous motor with excellent efficiency.
(3) Simple 1-finger operation for quick, comfortable work.
(4) The 360 degree rotating handle ensures comfortable operation and none of the reaction forces are transferred to the operator.
-> APPLICATIONS:
(1) Extremely short fastening cycles: Fast gear for run down and power gear for highest torques and precision.
(2) Mobile and always ready to use: Compact design for convenient working n limited spaces or without power supply.
(3) Efficient operation: Fast and easy gear-changing, great torque range - each gear has eleven torque values to choose from.
-> GRIPHOLD SPECIALS
(1) Very low susceptibility to damage and failure: Robust motor housing made of special polymer. It is break-proof, impact-proof and resistant to corrosion.
(2) Intelligent energy management: Smart electronics protect every battery cell from over charging and depth discharge. The charger cools battery packs during recharging. This reduces charging times and maximizes performance and durability.
-> ADVANTAGES:
(1) Low running costs: The low-wear, brushless synchronous motor is maintenance free.
(2) Health-preserving: Low weight, ergonomically designed, low noise emissions, no noise protection necessary.
(3) High performance: Two lithium-ion battery packs ensure up to 360 screw joints in a row. Each battery features a LED charge level indicator.
(4) Exact shut-off torque even at low battery levels.
(1) Double Acting Cylinder.
(2) 360 degree x 180 degree Swivel hose connection to reduce hose whip lashing & easy usage at restricted areas.
(3) Special high strength, ultra-light aircraft material for strength & light weight.
(4) 360 degree adjustable reaction arm with trigger style lock for easy adjustment.
(5) Compact unibody design with one way ratchet mechanism.
(6) Minimum moving parts for durability & low maintenance.
(7) Working pressure of 700 bars.
(1) Double Acting Cylinder.
(2) Exchangeable Hex Casset with one way ratcheting mechanism, to eliminate usage of heavy sockets.
(3) 360 degree x 180 degree Swivel hose connection to reduce hose whip lashing & easy usage at restricted areas.
(4) The inserts are with thin profile to use at limited space, where sockets can't be used.
(5) Special high strength, ultra-light aircraft material for strength & light weight.
(6) Reaction arm inbuilt with the inserts.
(7) Working pressure of 700 bars.
(8) Accuracy +-3%.
(1) Rigid Alloy Steel Body Construction for long life.
(2) Double acting cylinder design.
(3) Interchangeable Square drive to Hex Drive with Power Head.
(4) Rigid Bolting System with power head & ratchet head.
(5) Working Pressure 700 bar (10,000 psi).
(6) Torque Precision +-3%.
(1) Rigid Alloy Steel Body Construction for long life.
(2) Double acting cylinder design.
(3) Exchangeable Hex drive Ratchet Mechanism.
(4) Rigid Bolting System with power head & ratchet head.
(5) Working Pressure 700 bar (10,000 psi).
(6) Torque Precision +-3%.
(7) Interchangeable Hex Drive to Square Drive with Power Head.
GRIPHOLD® make, Heavy Duty Single Ended Straight open type slugging wrench made from chrome vanadium steel (EN-47) with rust resistant black industrial finish.
GRIPHOLD® industrial tools are made from the heavy duty and higher torque applications.
They are made from high-grade materials, which have a high Torque bearing capacity as well as the impact applications.
They undergo a special Heat Treatment process and the stress is relieved of all components before Hardening is carried out.
The process of hardness is carried out in accordance with the IS Standards for every tools and testing is done on 100% basis.
The tempering process is given special attention.
Design and Hardness are strictly followed as per IS-Standards for Industrial Tools.
Torque/Load tests are carried out to confirm the quality of every batch as per IS-Standards.
Griphold Industrial Tools have industrial black finish due to application of phosphate process for rust resistance and non-pealing of surface coating, instead of chrome plating, which is the general practice among general purpose tools manufacturers.
The wear resistance of Griphold Industrial Tools is almost the double of the general-purpose tools which is due to special manufacturing process.
GRIPHOLD® make, Swivel Impact Socket in 3/8 square drive made from Chrome vanadium Steel (EN 47) with rust resistant black industrial finish.
GRIPHOLD® industrial tools are made from the heavy duty and higher torque applications.
They are made from high-grade materials, which have a high Torque bearing capacity as well as the impact applications.
They undergo a special Heat Treatment process and the stress is relieved of all components before Hardening is carried out.
The process of hardness is carried out in accordance with the IS Standards for every tools and testing is done on 100% basis.
The tempering process is given special attention.
Design and Hardness are strictly followed as per IS-Standards for Industrial Tools.
Torque/Load tests are carried out to confirm the quality of every batch as per IS-Standards.
Griphold Industrial Tools have industrial black finish due to application of phosphate process for rust resistance and non-pealing of surface coating, instead of chrome plating, which is the general practice among general purpose tools manufacturers.
The wear resistance of Griphold Industrial Tools is almost the double of the general-purpose tools which is due to special manufacturing process.
GRIPHOLD® make, Heavy Duty, Hex Adapter (Allen Key Socket), in 1 Sq. Drive, made from chrome vanadium steel (EN-47) with rust resistant black industrial finish.
GRIPHOLD® industrial tools are made from the heavy duty and higher torque applications.They are made from high-grade materials, which have a high Torque bearing capacity as well as the impact applications.
They undergo a special Heat Treatment process and the stress is relieved of all components before Hardening is carried out.
The process of hardness is carried out in accordance with the IS Standards for every tools and testing is done on 100% basis.
The tempering process is given special attention.
Design and Hardness are strictly followed as per IS-Standards for Industrial Tools.
Torque/Load tests are carried out to confirm the quality of every batch as per IS-Standards.
Griphold Industrial Tools have industrial black finish due to application of phosphate process for rust resistance and non-pealing of surface coating, instead of chrome plating, which is the general practice among general purpose tools manufacturers.
The wear resistance of Griphold Industrial Tools is almost the double of the general-purpose tools which is due to special manufacturing process.
GRIPHOLD® make, Heavy Duty, Stud Tightener in 1/2 square drive made from chrome vanadium steel (EN-47) with rust resistant black industrial finish.
GRIPHOLD® industrial tools are made from the heavy duty and higher torque applications.
They are made from high-grade materials, which have a high Torque bearing capacity as well as the impact applications.
They undergo a special Heat Treatment process and the stress is relieved of all components before Hardening is carried out.
The process of hardness is carried out in accordance with the IS Standards for every tools and testing is done on 100% basis.
The tempering process is given special attention.
Design and Hardness are strictly followed as per IS-Standards for Industrial Tools.
Torque/Load tests are carried out to confirm the quality of every batch as per IS-Standards.
Griphold Industrial Tools have industrial black finish due to application of phosphate process for rust resistance and non-pealing of surface coating, instead of chrome plating, which is the general practice among general purpose tools manufacturers.
The wear resistance of Griphold Industrial Tools is almost the double of the general-purpose tools which is due to special manufacturing process.
GRIPHOLD® make, Heavy Duty, Crow Foot Wrench, in 3/8 sq. drive, made from chrome vanadium steel (EN-47) with rust resistant black industrial finish.
GRIPHOLD® industrial tools are made from the heavy duty and higher torque applications.
They are made from high-grade materials, which have a high Torque bearing capacity as well as the impact applications.
They undergo a special Heat Treatment process and the stress is relieved of all components before Hardening is carried out.
The process of hardness is carried out in accordance with the IS Standards for every tools and testing is done on 100% basis.
The tempering process is given special attention.
Design and Hardness are strictly followed as per IS-Standards for Industrial Tools.
Torque/Load tests are carried out to confirm the quality of every batch as per IS-Standards.
Griphold Industrial Tools have industrial black finish due to application of phosphate process for rust resistance and non-pealing of surface coating, instead of chrome plating, which is the general practice among general purpose tools manufacturers.
The wear resistance of Griphold Industrial Tools is almost the double of the general-purpose tools which is due to special manufacturing process.
GRIPHOLD® make, Heavy Duty, Single Hex Impact Extension Socket in 3/8 sq. drive made from chrome vanadium steel (EN-47) with rust resistant black industrial finish.
GRIPHOLD® industrial tools are made from the heavy duty and higher torque applications.
They are made from high-grade materials, which have a high Torque bearing capacity as well as the impact applications.
They undergo a special Heat Treatment process and the stress is relieved of all components before Hardening is carried out.
The process of hardness is carried out in accordance with the IS Standards for every tools and testing is done on 100% basis.
The tempering process is given special attention.
Design and Hardness are strictly followed as per IS-Standards for Industrial Tools.
Torque/Load tests are carried out to confirm the quality of every batch as per IS-Standards.
Griphold Industrial Tools have industrial black finish due to application of phosphate process for rust resistance and non-pealing of surface coating, instead of chrome plating, which is the general practice among general purpose tools manufacturers.
The wear resistance of Griphold Industrial Tools is almost the double of the general-purpose tools which is due to special manufacturing process.
GRIPHOLD® make, Heavy Duty, Single Hex Impact Extension Sockets in 1/2 sq. drive made from chrome vanadium steel (EN-47) with rust resistant black industrial finish.
GRIPHOLD® industrial tools are made from the heavy duty and higher torque applications.T
hey are made from high-grade materials, which have a high Torque bearing capacity as well as the impact applications.
They undergo a special Heat Treatment process and the stress is relieved of all components before Hardening is carried out.
The process of hardness is carried out in accordance with the IS Standards for every tools and testing is done on 100% basis.
The tempering process is given special attention.
Design and Hardness are strictly followed as per IS-Standards for Industrial Tools.
Torque/Load tests are carried out to confirm the quality of every batch as per IS-Standards.
Griphold Industrial Tools have industrial black finish due to application of phosphate process for rust resistance and non-pealing of surface coating, instead of chrome plating, which is the general practice among general purpose tools manufacturers.
The wear resistance of Griphold Industrial Tools is almost the double of the general-purpose tools which is due to special manufacturing process.
-> GRIPHOLD Heavy Duty Pipe Wrenches have been designed to is-4003 (part ii) - 1986.
-> Heavy Duty Handles are made of SG iron and aluminium alloy for maximum strength.
-> Movable and fix jaws are made up of high strength alloy steel for longer life.
-> Handle has been designed to ensure easy and untiring grip.
-> Knurled adjustable nut has been used to ensure easy setting.
-> Spring set has been designed for gripholding movable jaws.
-> Metallurgy of SG iron handle is as per is-1865-1991.
-> Torque test/load test is done as per is-4003 (part ii)-1986.
-> Percentage elongation test for the handles is done as per is-1865-1991.
-> GRIPHOLD tool kits are designed for maintenance and servicing of heavy earth moving machinery, fertilizer plants, thermal/gas/hydel power plants, cement plants, chemical/petrochemical plants, gas & oil exploration and mining equipment and various other high torque applications.
-> GRIPHOLD tool sets also consist of sockets in 1/2" and 3/4" square drive in SAE as well as metric sizes, driving accessories in 1/2" and 3/4" square and click type adjustable torque wrenches up to a capacity of 250 ft.lbs.
-> GRIPHOLD tool sets are supplied in a suitable heavy-duty tool box with padlock. The tool box is made from compressed steel sheet of 18/20 gauge, painted in red auto enamelled and oven baked for high durability.
-> GRIPHOLD heavy-duty red enamelled tool chest is provided with four pull out drawers, tote tray.
-> Partitions ate provided in the drawers to separate tools for convenience, while the top compartment under the tote tray has plenty of space.
-> This chest is suitable to carry more than 150 tools depending upon the size of tools.
-> This chest is made from heavy gauge steel sheet and its joint are spot welded with full line piano type hinges.
-> The chest has reinforced lid.
-> Its robust construction withstands the impacts in fields and provides the long life.
-> The tool chest is supplied with a sturdy padlock.
Convertible model of 3 Arm / 2 Arm on 5 & 10 ton model.
Claws are forged of high-strength alloy steel.
One set pullers include hand pump, hydraulic hose, pressure gauge, gauge adaptor.
Precise hydraulic control allows fast, efficient and safe pulling.
High quality, forged steel components provide superior reliability and service.
Available with and without full hydraulic set.
Max. torque: 1,100 ft-lb (1496 Nm)
Free Speed: 5,500 rpm.
Weight: 12.27 lb (5.6 kg)
Length: 8-43/64" (220 mm)
Handle Exhaust
Twin Hammer mechanism.
Max. Torque: 1,800 ft-lb (2,439 Nm)
Free speed: 3,500 rpm.
Weight: 18.2 lb (8.25 kg)
Length: 11" (278 mm)
Handle Exhaust
Twin Hammer mechanism.
Max. Torque: 1,800 ft-lb (2,439 Nm)
Free speed: 4,000 rpm.
Weight: 23.6 lb (10.61 kg)
Length: 21-1/8" (536 mm)
Side Exhaust
Twin Hammer mechanism.
Max. Torque: 74 ft-lb (100 Nm)
Free speed: 160 rpm.
Weight: 2.64 lb (1.2 kg)
Length: 9" (230 mm)
Rear Exhaust
A torque multiplier is a tool used to provide a mechanical advantage in applying torque to turn bolts, nuts or other items designed to be actuated by application of torque, such as the actuation of valves, particularly where there are relatively high torque requirements.
GRIPHOLD® make, Heavy Duty, Extension bars, made from chrome vanadium steel (EN-47) with rust resistant black industrial finish.
GRIPHOLD® industrial tools are made from the heavy duty and higher torque applications.
They are made from high-grade materials, which have a high Torque bearing capacity as well as the impact applications.
They undergo a special Heat Treatment process and the stress is relieved of all components before Hardening is carried out.
The process of hardness is carried out in accordance with the IS Standards for every tools and testing is done on 100% basis.
The tempering process is given special attention.
Design and Hardness are strictly followed as per IS-Standards for Industrial Tools.
Torque/Load tests are carried out to confirm the quality of every batch as per IS-Standards.
Griphold Industrial Tools have industrial black finish due to application of phosphate process for rust resistance and non-pealing of surface coating, instead of chrome plating, which is the general practice among general purpose tools manufacturers.
The wear resistance of Griphold Industrial Tools is almost the double of the general-purpose tools which is due to special manufacturing process.
GRIPHOLD® make, Heavy Duty, Speed Braces, made from chrome vanadium steel (EN-47) with rust resistant black industrial finish.
GRIPHOLD® industrial tools are made from the heavy duty and higher torque applications.
They are made from high-grade materials, which have a high Torque bearing capacity as well as the impact applications.
They undergo a special Heat Treatment process and the stress is relieved of all components before Hardening is carried out.
The process of hardness is carried out in accordance with the IS Standards for every tools and testing is done on 100% basis.
The tempering process is given special attention.
Design and Hardness are strictly followed as per IS-Standards for Industrial Tools.
Torque/Load tests are carried out to confirm the quality of every batch as per IS-Standards.
Griphold Industrial Tools have industrial black finish due to application of phosphate process for rust resistance and non-pealing of surface coating, instead of chrome plating, which is the general practice among general purpose tools manufacturers.
The wear resistance of Griphold Industrial Tools is almost the double of the general-purpose tools which is due to special manufacturing process.
