The Parking training system is a didactic system for the study of parking management inspired by a real industrial parking application. The system consists of two entry and exit barriers. Parking is an automatic system with sensors and actuators; the command can be provided, depending on the choice of the user, either by a computer or a microcontroller.
General Features
Robust steel case;
Height: 284 mm;
width: 550 mm;
Length: 550 mm;
Weight: 8 kg;
Power supply: AC220V ± 10% 50Hz
Power
This Electrical Machine Trainer consists of Single - phase induction motor, power control part, fault setting .The Single Phase Induction Motor Trainer is powered by the power area ,and the control circuit controls its motor movement,setting the fault point in the circuit by dialing the twist switch, and sets the detection function in the main circuit to allow the student to complete the troubleshooting.
Technology parameter of Electrical Machine Trainer Lab Equipments
The input voltage: single-phase three-wire 220V ± 10% 50HZ
The working environment: ambient temperature range is -5 ~ 40
The device capacity: AC
Overview of Synchronous Machine Training System
The Synchronous generator /motor group is composed of the three-phase asynchronous motor, three-phase synchronous generator (motor), speed measuring device, power supply part and display device. The motor group can do combined training, can also do the training alone. It can finish the speed measurement and AC generation experiments of the synchronous motor.
2. The Functional characteristics
2.1.Design reasonable, easy to use and convenient.
2.2.Motor terminals are connected to the safety terminal terminals, both convenient and safe to use wiring.
2.3. Measure the speed of the motor
2.4. can complete the DC motor speed and direction of rotation changes
3 .The Technical parameters
3.1, The input voltage: three-phase five-wire system AC380V ± 10% 50HZ
3.2, The working environment: temperature range is -5 ~ 40
3.3, The device capacity: AC
DLDP-WXD12 Radio Debugging Personal Skill Training Examination Appraisal Device
Overview
"DLDP-WXD12 Radio Debugging Work Skills Training Examination Identification System" in modular form and provide typical Electronic Training Radio Debugging Device modules like power supply,audio and video processing module, infrared transmitter and receiver module, 433MHz wireless transceiver module, radio module, interphone module, TV module etc. They can complete a variety of wireless transmission equipment debugging, analysis and assessment. It can be used as classroom teaching demonstration,and radio debugging relevant certificate examination.
Technical Parameter
Input power: single-phase, three-wire 220V±10% 50Hz/60Hz
Output power: AC power supply 220V±10% 50Hz/60Hz
AC power supply: 7.5V(1A) two sets , fixed DC power supply +5V (1A) ,+12V (1A) ,+35V(1A),-12V(1A)
Adjustable DC power supply: 0~30V (1A)
Capacity: < 1.5 KVA
Working environment: ambient temperature range -5~40 , relative humidity < 80% (25 ), altitude < 3000 m
Total dimension: 2150Ã?1042Ã?1680mm
Optional
Sweeper
Oscilloscope
Function generator
Dolang owns over a hundred patents, we research and develop Educational Lab Equipment Electronic Trainer, Mechatronics, automotive electronics, rail transit, hydraulic and Pneumatic Trainer, intelligent buildings, industrial robotics, process control series vocational teaching equipment independently, can also design solutions and product customization processing according to customers specific requirement. CNC Trainer Milling Machine is also available.
DLWD-ETBE-G04 Industrial Electricity Trainer can carry out a variety of machine electrical control circuit assessment. The device displays all the electrical movements of the machine . In addition, it also provides a full range of real machine tool troubleshooting skills training, you can set the fault by the host computer, only through the network switch can set the corresponding point of failure, effectively improve the students' machine tool maintenance skills .The device looks beautiful, easy to operate, intuitively,more close to the industrial site, Suitable for training assessment on maintenance electrician (Electrical) in early, medium, advanced skills identification.
Technical parameters
1, input power: three-phase five-wire 380V ± 10% 50HZ
2, the working environment: temperature -10 ~ +40 , relative humidity
DLWD-ETBE12D-L primary electrical lighting skills assessment training system is designed and researched based on the teaching of conventional lighting circuits and outdoor lighting lines. Practical operation of electrical control circuit and practical electronic circuit can be carried out listed in the teaching material of Lighting Circuit Foundation Installation, Lighting Control Circuit can make students' operation skills get good exercise and improvement. The training device not only can be used as the practical teaching for vocational school students, but also is an ideal equipment for assessing primary and intermediate maintenance electrician skills.
Technical parameters of Electrical Training Education Equipment
1. Input power: Three phase five wire 380V±10%ã??50HZ
2. Working environment: Ambient temperature range -5ï½?40
3. Capacity:
AC power supply 1.5KVA
DC excitation power supply0.5A
Armature powerï¼?ï¼?2A
4. Dimension: 1810x720x1620mm (L*W*H)
5. Technical parametersï¼?
1ï¼?Input power: Three phase five wire 380V±10%ã??50HZ
2ï¼?Working environment: Ambient temperature range -5ï½?40
3ï¼?Capacity: AC power supplyï¼?ï¼?1.5KVA
6. The total power control has the function of leakage protection. When the leakage current reaches 30mA, the protection device moves.
7. The grid voltage indication is provided with 450V pointer type AC voltmeters. 3pcs.
Experimental contents of primary lighting training equipment
1 Switch control socket and lamp
2 Two dual double control switches control a light
3 Three switches control a light
4 Control of incandescent lamp by sound control switch
5 Experiment of single-phase watt hour meter
6 Connection circuit of single-phase electric energy meter through mutual inductor
7 Wiring circuit of AC voltmeter and AC ammeter
8 Measuring three-phase voltage with universal change-over switch
9 Three phase power factor meter wiring
10 Wiring diagram of three-phase four wire watt hour meter
11 Wiring diagram of three-phase four wire electric energy band transformer
Dolangs vocational education philosophy come from Germany, we are dedicated to independent research, produce and sale in the field of vocational education training equipment. Including Electronic Training Kits, Electrical Motor Control Trainer, PLC Training Teaching Equipment and other equipment. If you want, you can call us at any time.
