Describe
This device is used for the connection between the SMT and AI production lines
Conveyor belt type: Round belt or flat belt
transfer speed: 0.5-20 m / min or user specified
power supply: 100-230V
Electrical load: 100 volts maximum
Transfer height: 900�20Millimeter(Or specify)
Transfer direction: Left-right or right-left
Describe
This device is used for the connection between the SMT and AI production lines
Conveyor belt type: Round belt or flat belt
transfer speed: 0.5-20 m / min or user specified
power supply: 100-230V
Electrical load: 100 volts maximum
Transfer height: 900±20Millimeter(Or specify)
Transfer direction: Left-right or right-left
Board width: 30-400MM
Tin furnace capacity: 200KG
Normal power / total power: 2-5KW/10KW
Starting power: 7KW
Machine size: 3050*1160*1360
net weight: 400KG
Transport motor: 3Ph 380V 60W
Transportation speed: 200MM-1800MM/Min
PCB transportation method: From left to right
power supply: 3Ph 380V 50HZ
PRODUCT PERFORMANCE
1, Chinese and English man-machine interface, can be switched at any time
2, Full touch screen plus PLC control, all parameters are set, saved and recalled in the touch screen
3, With two temperature measurement interfaces, the tem-
perature curve can be tested with the temperature measure-
ment line.
4, Brand controling system like Mitsubishi, SchneiderOmron etc will warrant the stability of the machine
5, CE certificated
6, Entrance of machine, It can connect with inserting con veyor directly
7, Stainless steel long shaft pin chain conveyor, never abra-
sion
8, Stepper motor for sprayer driving, sider/rail for sprayer guiding Sprayer moving speed can be setin touch screen.
9, Moving speed will not be influent by air pressure.
10, Compare with air cylinder driving, it's moving quietly, stably, less maintenance, longer lifetime.
11, Any parts contact with solder they are made of Ti(not plated TI, not cast iron pot). Just like solder pot impeller, wave tunnel, wave nozzle, bolts and nuts etc.
So to grantee the lead free solder's pureness and kep the pot no eroded.
12, Cavesr apeathat at eftef mexdire
FEATURE OF PRODUCT Fully meet all kinds of lead-free soldering process requirements; WindowsXP operating system, Chinese and English interface, easy to learn; Standard air furnace, patented hot air system, using hot air convection conduction is more efficient, thermal compensation is faster; PLC+PID closed-loop control, stable and reliable performance, high temperature control and curve repeatability; Dual temperature sensor, dual safety control mode, abnormal speed alarm, off-board alarm; Fully modular design for faster maintenance and reduced maintenance time and cost; The rail is dael with hardened process to make it more stability.
The conveyor chain adpoted with single Pin-plate design.
15% Heat transferring efficiency wasimproved to deal with more complicated and larger products.
Loader+printer+conveyor+pick and place+conveyor+reflow oven+working table(size:12.2*2*1.65m)
1. workers:1-2(Operator1, AOI1)
2. Actual Capaci-
ty:20000-22000pcs/hour(28000CPH FOR IPC9850)
3. Other information to check the cata-
logue The expansion of the solution: If it is necessary to increase production quantity, only need to increase the smtmounter, the other device does not need to increase, cost savings.
PRODUCT PERFORMANCE Use the servo system for easy and accurate positioning.
Adopt Japanese high-speed rail and South Korea SPG im-
ported variable frequency motor to drive the scraper seat to ensure printing accuracy.
The printing blade can be rotated up to 45 degrees to facili-
tate cleaning and replacement of the printing screen and scraper.
The blade holder can be adjusted back and forth to select the appropriate printing position.
The combined printing platen has fixed groove and PIN, easyto install and adjust, suitable for single and double panel printing.
The school version uses steel mesh to move, combined with printing(PCB)X,Y,Z. Correcting fine-tuning is quick and easy.
4.3-inch SamDraw true color touch screen + SIEMEN S7-200
PLC man-machine interface control, simple, convenient and more suitable for human-machine dialogue.
One-way and two-way, multiple printing methods can be set.
With automatic counting function, it is convenient to pro-
duce output statistics.
1) Suitable for all led lights: led tube, led bulb, led strip, led panel, led downlight..
2) From full automatic to semi-automatic, high to meddle speed line!
3) High accuracy machine line!
4) One year warranty!
5) Engineer availble to install and training machine in
PRODUCT PERFORMANCE Use the servo system for easy and accurate positioning.
Adopt Japanese high-speed rail and South Korea SPG im-
ported variable frequency motor to drive the scraper seat to ensure printing accuracy.
The printing blade can be rotated up to 45 degrees to facili-
tate cleaning and replacement of the printing screen and scraper.
The blade holder can be adjusted back and forth to select the appropriate printing position.
The combined printing platen has fixed groove and PIN, easyto install and adjust, suitable for single and double panel printing.
The school version uses steel mesh to move, combined with printing(PCB)X,Y,Z. Correcting fine-tuning is quick and easy.
4.3-inch SamDraw true color touch screen + SIEMEN S7-200
PLC man-machine interface control, simple, convenient and more suitable for human-machine dialogue.
One-way and two-way, multiple printing methods can be set.
With automatic counting function, it is convenient to pro-
duce output statistics.
Loader+printer+conveyor+pick and place+conveyor+reflow oven+working table(size:12.2*2*1.65m)
1. workers:1-2(Operator1, AOI1)
2. Actual Capaci-
ty:20000-22000pcs/hour(28000CPH FOR IPC9850)
3. Other information to check the cata-
logue The expansion of the solution: If it is necessary to increase production quantity, only need to increase the smtmounter, the other device does not need to increase, cost savings.
PRODUCT PERFORMANCE Use the servo system for easy and accurate positioning.
Adopt Japanese high-speed rail and South Korea SPG im-
ported variable frequency motor to drive the scraper seat to ensure printing accuracy.
The printing blade can be rotated up to 45 degrees to facili-
tate cleaning and replacement of the printing screen and scraper.
The blade holder can be adjusted back and forth to select the appropriate printing position.
The combined printing platen has fixed groove and PIN, easyto install and adjust, suitable for single and double panel printing.
The school version uses steel mesh to move, combined with printing(PCB)X,Y,Z. Correcting fine-tuning is quick and easy.
4.3-inch SamDraw true color touch screen + SIEMEN S7-200
PLC man-machine interface control, simple, convenient and more suitable for human-machine dialogue.
One-way and two-way, multiple printing methods can be set.
With automatic counting function, it is convenient to pro-
duce output statistics.
1) Suitable for all led lights: led tube, led bulb, led strip, led panel, led downlight..
2) From full automatic to semi-automatic, high to meddle speed line!
3) High accuracy machine line!
4) One year warranty!
5) Engineer availble to install and training machine in
PRODUCT PERFORMANCE Use the servo system for easy and accurate positioning.
Adopt Japanese high-speed rail and South Korea SPG im-
ported variable frequency motor to drive the scraper seat to ensure printing accuracy.
The printing blade can be rotated up to 45 degrees to facili-
tate cleaning and replacement of the printing screen and scraper.
The blade holder can be adjusted back and forth to select the appropriate printing position.
The combined printing platen has fixed groove and PIN, easyto install and adjust, suitable for single and double panel printing.
The school version uses steel mesh to move, combined with printing(PCB)X,Y,Z. Correcting fine-tuning is quick and easy.
4.3-inch SamDraw true color touch screen + SIEMEN S7-200
PLC man-machine interface control, simple, convenient and more suitable for human-machine dialogue.
One-way and two-way, multiple printing methods can be set.
With automatic counting function, it is convenient to pro-
duce output statistics.
Features:
1. Used to remove the PCB or tray from the wave soldering machine at an angle of 6-7�.
2. Transmission speed, transmission height and track angle can be adjusted.
3. A cooling fan can be installed to protect the PCB or components.
4. Special belt and track, stable transmission, stable and reliable work.
specification:
Size (length width height)
1000*600*750mm
PCB width
Max.350mm
PCB orientation
L-R(R-L option)
transfer speed
0-2m/min
engine
Single phase 220V 25W
power supply
Single phase 220V 50Hz
Conveyor height
700-800MM adjustable
Belt material
Anti-static belt
Transport rail length
1000MM
weight
50KG
High Quality SMT Production Line Machine with CE SMT line(tHigh flexibility): Loadertprinter+conveyor+pick and place +conveyort+reflow oven+working table (size:12.2-2*1.65m)
1. workers:1-2(Operator1, AOl 1)
2. Actual Capacity:20000-22000pcs/hour(28000CPH FOR IPC9850)
3. Other information to check the catalogue The expansion of the solution: If it is necessary to increase production quantity, only need to increase the smt mounter, the other device does not need to increase, cost savings.
1) Suitable for all led lights: led tube, led bulb, led strip, led panel, led downlight..
2) From full automatic to semi-automatic, high to meddle speed line!
3) High accuracy machine line!
4) One year warranty!
5) Engineer availble to install and training machine in oversea!
Features:
1. Used to remove the PCB or tray from the wave soldering machine at an angle of 6-7°.
2. Transmission speed, transmission height and track angle can be adjusted.
3. A cooling fan can be installed to protect the PCB or components.
4. Special belt and track, stable transmission, stable and reliable work.
specification:
Size (length Ã? width Ã? height)
1000*600*750mm
PCB width
Max.350mm
PCB orientation
L-R(R-L option)
transfer speed
0-2m/min
engine
Single phase 220V 25W
power supply
Single phase 220V 50Hz
Conveyor height
700-800MM adjustable
Belt material
Anti-static belt
Transport rail length
1000MM
weight
50KG
High Quality SMT Production Line Machine with CE SMT line(tHigh flexibility): Loadertprinter+conveyor+pick and place +conveyort+reflow oven+working table (size:12.2-2*1.65m)
1. workers:1-2(Operator1, AOl 1)
2. Actual Capacity:20000-22000pcs/hour(28000CPH FOR IPC9850)
3. Other information to check the catalogue The expansion of the solution: If it is necessary to increase production quantity, only need to increase the smt mounter, the other device does not need to increase, cost savings.
1) Suitable for all led lights: led tube, led bulb, led strip, led panel, led downlight..
2) From full automatic to semi-automatic, high to meddle speed line!
3) High accuracy machine line!
4) One year warranty!
5) Engineer availble to install and training machine in oversea!
FEATURE OF PRODUCT Fully meet all kinds of lead-free soldering process requirements; WindowsXP operating system, Chinese and English interface, easy to learn; Standard air furnace, patented hot air system, using hot air convection conduction is more efficient, thermal compensation is faster; PLC+PID closed-loop control, stable and reliable performance, high temperature control and curve repeatability; Dual temperature sensor, dual safety control mode, abnormal speed alarm, off-board alarm; Fully modular design for faster maintenance and reduced maintenance time and cost; The rail is dael with hardened process to make it more stability.
The conveyor chain adpoted with single Pin-plate design.
15% Heat transferring efficiency wasimproved to deal with more complicated and larger products.
Board width: 30-400MM
Tin furnace capacity: 200KG
Normal power / total power: 2-5KW/10KW
Starting power: 7KW
Machine size: 3050*1160*1360
net weight: 400KG
Transport motor: 3Ph 380V 60W
Transportation speed: 200MM-1800MM/Min
PCB transportation method: From left to right
power supply: 3Ph 380V 50HZ
PRODUCT PERFORMANCE
1, Chinese and English man-machine interface, can be switched at any time
2, Full touch screen plus PLC control, all parameters are set, saved and recalled in the touch screen
3, With two temperature measurement interfaces, the tem-
perature curve can be tested with the temperature measure-
ment line.
4, Brand controling system like Mitsubishi, SchneiderOmron etc will warrant the stability of the machine
5, CE certificated
6, Entrance of machine, It can connect with inserting con veyor directly
7, Stainless steel long shaft pin chain conveyor, never abra-
sion
8, Stepper motor for sprayer driving, sider/rail for sprayer guiding Sprayer moving speed can be setin touch screen.
9, Moving speed will not be influent by air pressure.
10, Compare with air cylinder driving, it's moving quietly, stably, less maintenance, longer lifetime.
11, Any parts contact with solder they are made of Ti(not plated TI, not cast iron pot). Just like solder pot impeller, wave tunnel, wave nozzle, bolts and nuts etc.
So to grantee the lead free solder's pureness and kep the pot no eroded.
12, Cavesr apeathat at eftef mexdire
