Long Pulse Single Frequency PM Fiber Amplifiers for DWDM transmission system
We will try our best to provide products similar to keopsys fiber amplifier like CEFA-C-WDM-LP fiber amplifier and CVFA fiber amplifier, NKT Photonics fiber amplifier like X15/E15/C15/Y10 signal-frequency lasers, NP Photonics fiber amplifier like the Rock Fiber Laser Module and the Rock Table- Top Fiber Laser Source, IPG Photonics fiber amplifier like GLR CW green fiber laser, VLM visible fiber laser and Yeetrbium CW fiber laser, and BKtel Photonics fiber amplifier.
You probably see us at following exhibitions: SPIE Photonics West in USA, Photonica in Russia, OPTO Taiwan, LASYS in Germany, OPIE in Japan and so on.
Parameter unit Specification
Min Typ. Max
Part No CKLIA-1550-M-SF-LP
Center wavelength nm 1540 1550 1565
Peak power W - - 500
Pulse energy uJ 100
Pulse width ns 200
Repetition rate kHz 20
Output average power W 2.0 - -
Beam quality M2 1.3 1.5
Output power stability1
ï¼?8hoursï¼? % - 1 2
Output isolation dB 35 - -
SMSR dB 20 35
Input signal average power uW 30 100
Power supply VDC 24
Operating temperature -35 - 65
Storage temperature -40 - 85
Output fiber type PLMA-GDF-25/300-M
Core NA 0.09
Output fiber length m >0.3
Output fiber connector FC/APC or collimator
3-port circulator On request
Dimension mm 300(L)X170(W)X25(H)
1. The output power stability is measured under 25ï¼?30 minutes after warm-up;
2. For more information about integrated 3-Port Optical Circulator, please contact
with us
Synthesized Signal Generator for the comprehensive assessment of electronic system performances
wwwdottechwin-chinadotcom
We will try our best to provide products similar to Keysight Synthesized Signal Generator, Rohde & Schwarz Synthesized Signal Generator, Tektronix Synthesized Signal Generator, Anritsu Synthesized Signal Generator.
Product Overview ï¼?
Synthesized Signal Generator TW4200 are microwave synthesized signal generator products with world-class performances introduced recently by the Techwin. With high pure signal quality, adjustable power output with a 146dB dynamic range and 0.001Hz frequency resolution, it can meet your high accurate test requirement. The standard dual-channel internal modulation signal generator and internal pulse generator provide comprehensive AM, FM, Ã?M and pulse modulation capabilities and avoid the annoyance of selecting from numerous options. Using English operation interface and large TFT large TFT LCD can better meet the demands of international users.
The Uses:
This product is an ideal LO source and clock source, and also can generate high quality analog signals, mainly used in the comprehensive assessment of electronic system performances, test on high-performance receiver and test on parameters of components and parts. It applies to many fields, such as aviation, spaceflight, radar, communication, navigation equipment.
Main Features:
â?¢ High Pure Signal Quality
â?¢ High Accurate Power Output in -120ï½?+11dBm Large Dynamic Range
â?¢ Standard Internal Modulation Signal Generator and Pulse Generator
â?¢ Excellent Broadband DCFM & DCÃ?M Function
â?¢ High Accurate Linear AM and Exponential AM
â?¢ High-performance Pulse Modulation
â?¢ 170GHz Frequency Multiplying Source Module Spread Spectrum
â?¢ English Operation Interface, Large TFT LCD
â?¢ Frequency Step & List Sweep
Synthesized Signal Generator for the comprehensive assessment of electronic system performances
We will try our best to provide products similar to Keysight Synthesized Signal Generator, Rohde & Schwarz Synthesized Signal Generator, Tektronix Synthesized Signal Generator,  Anritsu Synthesized Signal Generator.
Product Overview ï¼?
Synthesized Signal Generator TW4200 are microwave synthesized signal generator products with world-class performances introduced recently by the Techwin. With high pure signal quality, adjustable power output with a 146dB dynamic range and 0.001Hz frequency resolution, it can meet your high accurate test requirement. The standard dual-channel internal modulation signal generator and internal pulse generator provide comprehensive AM, FM, Ã??M and pulse modulation capabilities and avoid the annoyance of selecting from numerous options. Using English operation interface and large TFT large TFT LCD can better meet the demands of international users.
The Uses:
This product is an ideal LO source and clock source, and also can generate high quality analog signals, mainly used in the comprehensive assessment of electronic system performances, test on high-performance receiver and test on parameters of components and parts. It applies to many fields, such as aviation, spaceflight, radar, communication, navigation equipment.
Techwin single-mode CW fiber lasers with high power output
www dot techwin-china dot com
We will try our best to provide products similar to keopsys fiber laserï¼? NKT Photonics fiber laserï¼?NP Photonics fiber laserï¼?IPG Photonics fiber laserï¼?BKtel Photonics fiber laser.
Techwin 1.0μm single-mode CW fiber lasers of are a highly integrated continuous Yb-doped fiber laser system with high power output. These fiber lasers employ integrated design of all fiber structure and use double cladding fiber pumping technology, thus realizing high performance output laser. The output power can be up to 20W and near diffraction-limited beam quality is achieved at the same time. They can be widely used in the areas of scientific research, experimental teaching and device testing.
Techwin 1.0μm single-mode CW fiber lasers employ the control system based on microprocessor which has stable property, long lifetime and free maintenance. With a clear interface and easy control, the LCD on the front panel can give a real-time display of the operating state of the output power and temperature. The LCD can also offer warning messages. Besides, in order to be convenient for system integration, Techwin can offer modularized package according to the user`s requirements.
Techwin Short Pulsed Fiber Laser for LiDAR and 3D scanning
www dot techwin-china dot com
We will try our best to provide products similar to keopsys fiber laser, NKT Photonics fiber laser, NP Photonics fiber laser, PG Photonics fiber laser, BKtel Photonics fiber laser.
Techwin 1064nm pulse fiber laser Description:
Techwin 1064nm pulse fiber laser for LiDAR is a high peak power, high pulse energy fiber laser source. Using MOPA configuration and all-fiber optimized design offer the high peak power and near diffraction-limited quality output beam. Techwin 1064nm pulse fiber laser for LiDAR is ideal sources for LiDAR applications of 3D scanning, telemetry and range finding.
Techwin 1064nm pulse fiber laser for LiDAR employ module package with compact and rugged design, integrated with external trigger and monitor output for synchronization. It is easily deployed and maintenance-free, ensuring a long-life and cost-effective operation. The user also can adjust pulse width and repetition rate of the laser by connecting computer. It is suitable for system integration.
Features:
â?¢High peak power: up to 10kW
â?¢Average power: 5W
â?¢Repetition rate adjustable: 30-500 kHz
â?¢Pulse energy: 100uJ
â?¢Excellent beam quality
Applications:
â?¢LiDAR
â?¢3D scanning
â?¢Range finding
â?¢Target detection
â?¢Telemetry
â?¢system integration
Techwin C-band ASE light source for sensor system
www dot techwin-china dot com
Product Description:
Techwin C-band ASE light sources employ optimized Er-doped fiber laser and realize output laser which is featured by different spectral width, high output power and extremely high stability of the output power within the whole temperature range. Techwin C-band ASE light sources have extremely high spectral flatness. For the purpose of different applications, the Gaussian spectral output can be provided according to the requirement of the user.
Techwin Multi-mode diode laser sources are a highly integrated system sources. The benchtop sources uses high-definition LCD which displays the current and voltage synchronously and has continuously tunable output power; suitable for scientific research and manufacturing testing. In addition, Techwin can provide compact module package for system integration.
Applications:
Components testing
Optical fiber sensor system
Fiber optic gyroscope
Spectrum Analysis
Other lab applications
Techwin pulsed fiber laser for LiDAR and 3D scanning
wwwdottechwin-chinadotcom
We will try our best to provide products similar to keopsys fiber laser, NKT Photonics fiber laser, NP Photonics fiber laser, PG Photonics fiber laser, BKtel Photonics fiber laser.
You probably see us at following exhibitions: Laser Korea, OPTO Taiwan, SPIE Photonics West USA, Photomix Japan and so on.
Product Description:
Techwin CKLID series 1030nm pulsed fiber laser is a laser source delivering high peak power and high pulse energy. Using MOPA configuration and all- fiber optimized design, the laser can offer the high peak power and the near diffraction-limited quality output beam. Techwin CKLID series 1030nm pulsed fiber laser employs module package with compact and rugged design, integrated with external trigger and synchronization output monitor. It is easily deployed and maintenance-free, ensuring a long- life and cost-effective operation. The user also can adjust pulse width and repetition rate of the laser by connecting computer. It is quite suitable for system integration.
Features:
â?¢ High peak power: up to 4kW
â?¢ Average power: up to 1W
â?¢ Repetition rate adjustable
� Pulse energy: up to 10μJ
â?¢ Excellent beam quality
Applications:
â?¢ LiDAR
â?¢ 3D scanning
â?¢ Range finding
â?¢ Target detection
â?¢ Telemetry
Techwin CW fiber laser for science research
www dot techwin-china dot com
We will try our best to provide products similar to keopsys fiber laser, NKT Photonics fiber laser, NP Photonics fiber laser, PG Photonics fiber laser, BKtel Photonics fiber laser.
Techwin CW fiber lasers Product Description:
Techwin 1.5μm CW fiber lasers are eye-safe high power fiber lasers. These fiber lasers employ integrated design of all fiber structure and use double cladding fiber pumping technology, thus realizing high performance output laser. The output power can be up to 10W and near diffraction-limited beam quality is achieved at the same time. They can be widely used in the areas of scientific research, experimental teaching and device testing.
Techwin 1.5μm CW fiber lasers employ the control system based on microprocessor which has stable property, long lifetime and free maintenance. With a clear interface and easy control, the LCD on the front panel can give a real-time display of the operating state of the output power and temperature. The LCD can also offer warning messages. Besides, in order to be convenient for system integration, our company can offer modularized encapsulation according to the user`s requirements.
Application of Techwin single-mode fiber laser:
â?¢ Fiber optical communication
â?¢ Free-space communication
â?¢ Fiber optical sensing
â?¢ Test and measure
â?¢ Science research
Techwin single-mode fiber lasers Feature:
â?¢ High output powerï¼?up to 10W
â?¢ excellent beam quality
â?¢ high Stability and reliable performance
â?¢ All-fiber structure
â?¢ Single-mode outputï¼?PM optional
Narrow Linewidth CW fiber laser for spectrum combination
www dot techwin-china dot com
We will try our best to provide products similar to keopsys fiber laser, NKT Photonics fiber laser, NP Photonics fiber laser, PG Photonics fiber laser, BKtel Photonics fiber laser.
Brief Introduction of Techwin 1.0m Narrow Linewidth CW fiber laser :
Techwin 1.0m Narrow Linewidth CW fiber lasers are specific designed for high demanding applications such as spectrum combination. This MOPA designed fiber laser features narrow spectrum width, say less than 0.1nm, cascaded multi-stage all fiber amplifiers generate high power output and maintain high output beam quality, singlemode output.
Narrow Linewidth CW fiber lasers Advantages:
The seed laser is unique, Techwin has the all fiber technology for generating narrow spectrum width seed laser, it keeps broadband spectrum content, this is the key advantage to eliminate non-linear effects during high power amplification, such as SBS. Techwin 1.0m narrow linewidth CW fiber lasers are ideal for power scaling without SBS effect.
Besides, Techwin 1.0m narrow linewidth CW fiber lasers employ the control system based on microprocessor which has stable property, long lifetime and free maintenance. With a clear interface and easy control, the LCD on the front panel can give a real-time display of the operating state of the output power and temperature. The LCD can also offer warning messages. Besides, in order to be convenient for system integration, our company can offer modularized encapsulation according to the users requirements.
Techwin 1.0m Narrow Linewidth CW fiber lasers Features:
High output powerup to 100W
excellent beam quality, singlemode
high Stability and reliable performance
All-fiber structure
PM optional
And Where are the Narrow Linewidth CW fiber laser applied?
Seed laser for high power fiber lasers
Spectrum combination
Coherent combination (PM version)
Test and measurement
Science research
Techwin Fiber Sensing MachineTW3600 (BOTDR) for Oil Pipeline and Bridge Monitoring
We will try our best to provide products similar to keopsys fiber sensing machine like CEFA-C-WDM-LP fiber amplifier and CVFA fiber amplifier, NKT Photonics fiber sensing machine like X15/E15/C15/Y10 signal-frequency lasers, NP Photonics fiber sensing machine like the Rock Fiber Laser Module and the Rock Table- Top Fiber Laser Source, IPG Photonics fiber sensing machine like GLR CW green fiber laser, VLM visible fiber laser and Yeetrbium CW fiber laser, and BKtel Photonics fiber sensing machine.
You probably see us at following exhibitions: Photonica in Russia, SPIE Photonics Europe in France, SPIE Defense + Commercial Sensing in USA, International Pipeline Exposition in Canada and so on.
Product Overview
Techwin Brillouin Optical Time Domain Reflectometer TW3600 (BOTDR) can simultaneously measure strain distribution, loss distribution and Brillouin scattering spectrum at different location of optical fiber, and can display 3D and multiple distribution parameters. It has the advantages of high-precision strain measurement, good repeatability, single-end non-destructive measurement etc. It has become an indispensable instrument in the field of optical fiber communication and optical fiber sensing (OFS).
Techwin Brillouin Optical Time Domain Reflectometer TW3600 (BOTDR) can be widely used for the health monitoring of bridge, dam, tunnel, lofty building, oil well platform and oil pipeline etc., the forecasting and alarming of geological hazard such as mountain landslide, mud-rock flow and earthquake etc., as well as the health inspection of intelligent structures as naval vessels and spacecraft etc.
Techwin Brillouin Optical Time Domain Reflectometer TW3600 (BOTDR) can be also used to measure the strain distribution of optical fiber loop or subsea optical cable when the optical fiber gyroscope (OFG) and optical fiber hydrophone are in the process of development, production, and test, or when the subsea optical cable is in the process of development, production, construction, acceptance inspection and maintenance.
Main Features
Single-end nondestructive test
Measurement of Brillouin scattering spectrum width distribution
Measurement of optical fiber strain distribution
Measurement of optical fiber loss distribution
Measurement of Brillouin scattering spectrum
Multi-window display
Typical Application
Tunnel health monitoring
Oil pipeline monitoring
Bridge monitoring
Dam monitoring
Coal mine passageway monitoring
Oil well platform monitoring
Techwin vector network analyzer for manufacturing wireless device
We will try our best to provide products similar to Keysight like X-series vector network analyzer(MXG, EXG,CXG), Rohde & Schwarz vector network analyzer like R&S FSW Signal and Spectrum Analyzer and R&S FSWP Phase Noise Analyzer and VSO Tester, Tektronix vector network analyzer like RSA5000B Real Time Spectrum Analyzer, Anritsu vector network analyzer like MS2090A Field Master Pro and MS2720T Spectrum Master.
You will probably see us at the following exhibitions: EUMV in Europe , IMS in USA, MWC in Spain, EMV in Germany and so on.
Product Overview:
Techwin TW4650 series vector network analyzer is consist of 10MHz13.5GHz, 10MHzï½?26.5GHz and 10MHzï½?43.5GHz. Techwin TW4650 series reduces cost and enhances price-performance ratio but still maintains the same critical technical specifications with those of high performance instrument, such as sweep speed, dynamic range etc. Techwin TW4650 series offers multiple calibration types including frequency response, single port, response isolation, enhanced response, full dual-port and E-cal. Multiple display types are embedded like logarithm amplitude, linear amplitude, standing-wave, phase, group delay, Smith chart, polar coordinates. Many standard interfaces are available including USB, LAN, GPIB, VGA etc. They can precisely measure characteristics of amplitude-frequency, phase-frequency, and group delay and so on.
Main Features:
Flexible calibration types, compatible with multiple cal kits
Support complicated testing solutions with many windows, multiple channels and fast operation
Multiple display types like logarithm amplitude, linear amplitude, standing-wave ratio, Smith chart etc
With USB, GPIB, LAN and VGA
English operation interfaces, 12.1 inch 1280*800 high-resolution multi-point touch screen
Record/Run, one-button operation simplifies measurement setup and improves working efficiency
Functions:
Flexible calibration types, compatible with multiple calibration kits
Techwin TW4650 series vector network analyzer can give you various calibration types, including guided calibration (auto cal), non-guided calibration (using mechanical cal kits for through response, through response and isolation calibration, single port calibration, enhanced response calibration, full dual-port SOLT calibration, TRL calibration), ECal. Different cal kits can be selected, like coaxial calibration kits or ECal kits, according to actual measurement needs, to make measurement easy for devices of diversified interfaces.
â?¢ Multiple windows display all measurement channels
The analyzer supports up to 64 channels and displays up to 32 measuring windows simultaneously, with up to 16 trace curves displayed in each window at the same time, allowing more visual observation and more convenient operation.
Vector Network Analyzer for performance measurement
www dot techwin-china dot com
We will try our best to provide products similar to Keysight Vector Network Analyzer, Rohde & Schwarz Vector Network Analyzer, Tektronix Vector Network Analyzer, Anritsu Vector Network Analyzer.
Product Overview:
Techwin Vector Network Analyzer TW4600 has powerful measurement functions, which can complete vector network analysis in the field of wireless communications, cable TV, and automotive electronics, etc. It can be used for performance measurement of filter, amplifier, antenna, cable, and cable television sub connectors, etc. radio frequency components. It adopts Windows operating system; has error calibration and time domain functions; offers multiple display formats such as logarithmic amplitude, linear amplitude, standing-wave ratio (SWR), phase, group delay, Smith chart and poplar coordinates, etc.; provides multiple calibration types: including frequency response, single port, response isolation, enhanced response and full two-port calibrations, rapid SOLT and electrical calibration; has Windows operating platform and LAN function and can display multiple channels; is designed with USB interface, LAN interface, GPIB interface, VGA interface and color LCD display, all of which allow it to quickly and accurately measure the S-parameter amplitude, phase and group delay characteristics of DUT, with efficient and powerful error correction capability.
Main Features:
â?¢ With dynamic range of 125dB, for accurate measurement of high suppression device
â?¢ 10.4 inch true color high-resolution LCD with touch screen function
â?¢ Optional 75â?¦ test port impedance option for cable TV components measurement
â?¢ 0.001dBrms trace noise renders network analyzer higher measuring accuracy
â?¢ With up to 64 independent measuring channels that can implement complex testing schemes quickly
â?¢ Powerful data analysis functions, such as ripple test, bandwidth test and limit test
â?¢ Extendable to 4 ports through port extension set, test the whole 16 parameters of
4-port network through a single connection, capable of balanced parameter test
Typical Applications:
Production test of mobile communication products
The frequency range of Vector Network Analyzer TW4600 can meet the demand of production
test of mobile communication products. It has such features of fast sweep speed, wide dynamic
range and compact size which is very suitable for the test of mass production of factory. The
vector network analyzer can be applied to the test of RF devices, such as filter, power amplifier,
antenna and cables. The 75â?¦ test assembly is also available to characteriz the device of CATV.
Techwin fiber optical otdr tester for online testing
We will try our best to provide products similar to Yokogawa OTDR, Anritsu OTDR, EXFO OTDR, JDSU OTDR, Ideal Networks OTDR.
Introduction and Function of OTDR TW3100E
Automatic Measurement Mode: Only by selecting the measurement wavelength, the measurement parameters are automatically set, and the trace data is automatically saved and automatically analyzed.
Multi-wavelength Measurement Mode: In the parameter setting, the wavelength can be automatically switched into the multi-wavelength measurement mode. Under this mode, the analysis can be achieved on the attenuation state of the same fiber section under different wavelengths.
Trace Fixing Function: It can achieve the same-screen comparison and display of one trace with another real-time trace or the trace under the average measurement, which is very useful for the installation of multi-core fiber or the checking of the aged fiber in the optical fiber network already been installed.
Multi-wavelength Analysis Function: It can achieve the comparison, display and analysis functions of any trace file.
Below are some specifications for OTDR TW3100E.
Linearity (dB/dB) : ±0.05 dB/ dB
Loss threshold (dB) : 0.05
Loss resolution ratio (dB) : 0.01
Sampling resolution ratiom: 0.125 to 8
Sampling point : 32K
Distance uncertainty (m) : ±(1 m + 510 -5 distance + sampling interval)
Distance scope (km) : 0.3 to180
Typical real-timerefreshing duration (s) : 0.2
Techwin Fusion Splicer for maintenance of optic fiber
www dot techwin-china dot com
We will try our best to provide products similar to Fujikura Fusion Splicer, Sumitomo Fusion Splicer, FITEL Fusion Splicer, INNO Fusion Splicer, ILSINTECH Fusion Splicer, FiberFox Fusion Splicer.
How About This Product?
The TCW-605E Series adopt high-speed image processing technology and special precision- positioning technology, automatically finish the whole process of fiber fusion in 8 seconds typically, TFT LCD monitor displays all steps of fiber fusion clear at a glance.
The Uses:
â?¢ The TCW605E Series Fusion Splicer have been using in English, Spanish, Portuguese, French, Italian, German, Arabic, Russian, Korea, Japanese, etc.
� Widely used for SM and MM Quartz Fiber with diameter 80-150μm(300μm optional), coating layer diameter 0.1-1.0mm and bare fiber length 16mm more or less.
â?¢ Ideal tools for construction and maintenance of fiber and cable in both field and laboratory applications.
Detailed Introduction:
â?¢ Not only a Fusion Splicer, but also your partner who make your job easy and happy
â?¢ 5.0 inch TFT color LCD monitor with anti-reflective coating
â?¢ The advanced core to core fiber profile alignment system(PAS)
â?¢ ARC Calibration FREE system. ARC Calibration sub-menu included in the Menu too, can do the ARC Calibration by Manual when necessary
â?¢ X/Y axes was displayed or both X and Y were displayed simultaneously, Magnification up to 300 times
â?¢ 8 seconds splicing time, 30 seconds Heat-Shrinking
â?¢ Battery capacity was display in real time, precisely
Fusion Splicer TCW-605E of Techwin for construction and maintenance of fiber and cable
We will try our best to provide products similar to Fujikura Fusion Splicer, Sumitomo Fusion Splicer, FITEL Fusion Splicer, INNO Fusion Splicer, ILSINTECH Fusion Splicer, FiberFox Fusion Splicer.
How About This Product?
The TCW-605E Series adopt high-speed image processing technology and special precision- positioning technology, automatically finish the whole process of fiber fusion in 8 seconds typically, TFT LCD monitor displays all steps of fiber fusion clear at a glance.
The Uses:
1.The TCW605E Series Fusion Splicer have been using in English, Spanish, Portuguese, French, Italian, German, Arabic, Russian, Korea, Japanese, etc.
2.Widely used for SM and MM Quartz Fiber with diameter 80-150m(300m optional), coating layer diameter 0.1-1.0mm and bare fiber length 16mm more or less.
3.Ideal tools for construction and maintenance of fiber and cable in both field and laboratory applications.
Detailed Introduction:
1.Not only a Fusion Splicer, but also your partner who make your job easy and happy
2.5.0 inch TFT color LCD monitor with anti-reflective coating
3.The advanced core to core fiber profile alignment system(PAS)
4.ARC Calibration FREE system. ARC Calibration sub-menu included in the Menu too, can do the ARC Calibration by Manual when necessary
Technical Specifications:
1.Average Splicing Loss : 0.02dB with G.652 and G.657, 0.01dB with G.651 and 0.04dB with G.653 and G.655
2.Splicing Time : Typical splicing time:8s
3.Heating Time : Typical heating time:30s
4.Return Loss : 60dB or greater
5.Fiber Coating : 100m to 1000m
6.Fiber Cladding : 80m to 150m(300m optional)
Techwin TW4950 Portable Spectrum Analyzer for signal and equipment test
We will try our best to provide products similar to Keysight Portable Spectrum Analyzer like X-Series and BSA, Rohde & Schwarz Portable Spectrum Analyzer like FSW, FSWP and FSMR, Tektronix Portable Spectrum Analyzer like RSA 308B, RSA7100 and RSA 5000B, Anritsu Portable Spectrum Analyzer like MS2850A, MS2840A and MS2830A.
You will probably see us at the following exhibitions: EUMV in Europe , IMS in USA, MWC in Spain, EMV in Germany and so on.
Overview of Portable Spectrum Analyzers advantages and functions :
Techwin TW4950 series spectrum analyzer has many advantages: wide frequency range, high peroformance index, high sweep speed, various functions, and easy operation. In terms of performance index, it has excellent displayed average noise level, low phase noise, and high sweep speed. In terms of measurement functions, it has measurement functions of spectrum analyzer, inteference analyzer, AM/FM/PM analyzer, power meter, channel scanner etc. as well as intelligent measurement functions of channel power, occupied bandwidth, adjacent-channel power ratio, tune&listen, emission mask, and carrier-to-noise ratio etc. Techwin TW4950 apots the integrated design of 8.4 inch LCD and capative touch screen, which improves the display definition and operation convinience. It is handheld, compact and light, with flexible power supply, which is very suitable for field work.
Portable Spectrum Analyzers Main Characteristics :
Wide frequency range: from 9kHz to 44GHz, 4 models
Low displayed average noise level: -163dBm@1Hz RBW(typical)
Excellent phase noise performance: -106dBc/Hz@100kHz frequency offset@1GHz carrier
High sweep speed: for 1GHz span, shortest sweep time
Portable Spectrum Analyzer for signal and equipment test
We will try our best to provide products similar to Keysight Portable Spectrum Analyzer, Rohde & Schwarz Portable Spectrum Analyzer, Tektronix Portable Spectrum Analyzer,  Anritsu Portable Spectrum Analyzer.
Overview of Portable Spectrum Analyzers advantages and functions :
Techwin TW4950 series spectrum analyzer has many advantages: wide frequency range, high peroformance index, high sweep speed, various functions, and easy operation. In terms of performance index, it has excellent displayed average noise level, low phase noise, and high sweep speed. In terms of measurement functions, it has measurement functions of spectrum analyzer, inteference analyzer, AM/FM/PM analyzer, power meter, channel scanner etc. as well as intelligent measurement functions of channel power, occupied bandwidth, adjacent-channel power ratio, tune&listen, emission mask, and carrier-to-noise ratio etc. Techwin TW4950 apots the integrated design of 8.4 inch LCD and capative touch screen, which improves the display definition and operation convinience. It is handheld, compact and light, with flexible power supply, which is very suitable for field work.
Techwin TW4950 can be used for signal and equipment test in the fields of aerospace, microwave & stallite communication, radio communication, radar monitoring, electronic countermeasures & reconnaissance, and precision guidance.
Portable Spectrum Analyzers Main Characteristics :
Wide frequency range: from 9kHz to 44GHz, 4 models
Low displayed average noise level: -163dBm@1Hz RBW(typical)
Excellent phase noise performance: -106dBc/Hz@100kHz frequency offset@1GHz carrier
sweep speed: for 1GHz span, shortest sweep time
Techwin Handheld Tester OTDR TW3100E with Automatic Measurement Mode
We will try our best to provide products similar to Yokogawa OTDR, Anritsu OTDR, EXFO OTDR, JDSU OTDR, Ideal Networks OTDR.
Introduction
1.Automatic Measurement Mode: Only by selecting the measurement wavelength, the measurement parameters are automatically set, and the trace data is automatically saved and automatically analyzed.
2.Multi-wavelength Measurement Mode: In the parameter setting, the wavelength can be automatically switched into the multi-wavelength measurement mode. Under this mode, the analysis can be achieved on the attenuation state of the same fiber section under different wavelengths.
3.Trace Fixing Function: It can achieve the same-screen comparison and display of one trace with another real-time trace or the trace under the average measurement, which is very useful for the installation of multi-core fiber or the checking of the aged fiber in the optical fiber network already been installed.
4.Multi-wavelength Analysis Function: It can achieve the comparison, display and analysis functions of any trace file.
5.FTTx online testing, able to identify the splitter and the fibers end.
6.Large-capacity lithium-ion rechargeable battery, with the long standby time over 8 hours.
7.Bellcore file format (.sor), with the storage of greater than 10,000 traces.
8.Communication Light Detection: It can effectively protect the test instrumentation and communication equipments.
