PRODUCT PARAMETERS
1. Apperance: Colorless crystals or white crystalline powder .
2. Assay: Industry grade â?¥98% , Pharm grade â?¥99%
3. Usage:
1). For pharmaceutical chemical.
2). For animals feed additives.
3). For analysis of chemical reagents.
4.Packing: Usually 25kgs per cardboard drum.
5.CAS No.: 7681-11-0
PRODUCT PARAMETERS
Chemical Name: 1H-1,2,4-Triazole, potassium salt
CAS: 41253-23-0
Molecular Formula: C2H3KN3
Molecular Weight: 108.16362
Appearance: White Powder
Physicochemical properties: white crystals, soluble in water, ethanol, easily deliquescent in the air.
Quality index: Raw materials used as pesticide intermediates and organic synthetic materials.
4-Methyl-2-Hydrazino Benzothiazole
PRODUCT PARAMETERS
English name: 4-Methyl-2-hydrazino benzothiazole
Chinese alias: 4-Methyl-2-hydrazino benzothiazole
Structural formula:
CAS No.: 20174-68-9
Quality index: Molecular formula: C8H9N3SContent: 98% Melting point: 162°C-166°C Appearance: white or white-like crystal
Other descriptions: Pesticide intermediates
Packing: 25KG/paper drum
Parylene D
PRODUCT PARAMETERS of Parylene Powder
Parylene D, the third member of the series, is produced from the same raw material as Parylene N, modified by the substitution of chlorine atoms for two of the aromatic hydrogens. Parylene D is similar in properties to Parylene C with the added ability to withstand slightly higher use temperatures.
Item Parylene D
Cas No. 30501-29-2
Formula C16H12Cl4
Weight 346.078
Appearance White powder
MP/BP MP:130-140 ºC
Purity 99% Min
Purpose Can be used in photoelectric materials
Storage Room temperature
Parylene C
PRODUCT PARAMETERS of Parylene Material
Parylene C, the second commercially available member of the Parylene Powder series, is produced from the same raw material (dimer) as Parylene N, modified only by the substitution of a chlorine atom for one of the aromatic hydrogens. Parylene coating material has a useful combination of electrical and physical properties, plus a very low permeability to moisture and corrosive gases.
Item Parylene C
Cas No. 28804-46-8
Formula C16H14Cl2
Weight 277.188
Appearance White powder
MP/BP 165-167(MP)
Purity 99% Min
Purpose Vacuum coating material
Storage Room temperature
Parylene N
PRODUCT PARAMETERS of Parylene Powder
The basic member of the series, Parylene N, is poly(para-xylylene), a completely linear, highly crystalline material. This parylene coating is a primary dielectric, exhibiting a very low dissipation factor, high dielectric strength, and a low dielectric constant invariant with frequency. The crevice-penetrating ability of Parylene N is second only to that of Parylene Material.
Item Parylene N
Cas No. 1633-22-3
Formula C16H16
Weight 208.2982
Appearance White powder
MP/BP 285-288ï¼?MPï¼?
Nature: colorless tetragonal crystal or white crystalline powder
Packing: 25KG/drum or according to customer's needs
Content: 99%
Standard: CP
Uses: the main raw material of the pharmaceutical industry, also used as oxidant, used in food industry, common analytical reagent.Sodium Periodate, Povidone Iodine, Methyl Iodide are all kinds of Pharmaceutical Intermediates.
Specification
CAS: 7790-28-5
MF: INaO4
MW: 213.89
EINECS: 232-197-6
Melting point 300 °C (dec.)(lit.)
Boiling point 300°C
Parylene F
PRODUCT PARAMETERS of our PARYLENE COATING
Parylene F, the newest commercially available variant of Parylene Material, replaces the alpha hydrogen atom of the N dimer with fluorine. This variant of Parylene Powder is useful in high temperature applications (short term up to 450°C) and those in which long-term UV stability is required. Parylene F also has the lowest coefficient of friction and dielectric constant, and the highest penetrating ability of the four variants.
Item Parylene F
Cas No. 1785-64-4
Formula C16H8F8
Weight 352.2219
Appearance White powder
MP/BP 321 ºCï¼?BPï¼?
Purity 99% Min
Purpose Optoelectronic Materials
Storage Room temperature
Parylene is considered by many to be the ultimate conformal coating for the protection of devices,components and surfaces in the electronics, instrumentation, aerospace, medical and engineering industries.
Coatings perform well as dry lubricants: static and dynamic friction coefficients are equal and comparable to fluoropolymers with the advantage that they also have good wear and abrasion resistance.
1. A Poly-para-Xylylene coating film formed by the chemical vapor deposition (CVD) process.
2. Parylene is a conformal protective polymer coating material utilized to uniformly protect any component configuration on such diverse substrates as metal, glass, paper, resin, plastic, ceramic, ferrite and silicon.
3. Parylene provides exceptional protection for the most extreme environmental conditions.
4. The Parylene film is chemically inert, no acid or alkaline material will attack it in any significant manner.
5. Usages for the Parylene coating includes, implantable devices, fish tags, circuit boards (SMT, Thruhole, or mixed technology) sonar applications, ultrasonic applications, surgical devices, and elastomers.
MOPS Sodium Salt
Synonyms: 3-(N-Morpholino)propanesulfonic acid sodium salt, 4-Morpholinepropanesulfonic acid sodium salt;3-Morpholino-1-propanesulfonic acid sodium salt;3-Morpholinopropane-1-sulfonic acid sodium salt;MOPS sodium salt ,99.5%;3-(Morpholin-4-yl)propanesulphonic acid,
CAS: 71119-22-7
MF: C7H14NNaO4S
MW: 231.25
EINECS: 1533716-785-6
Product Categories: Buffer
Typical Properties
Melting point 277-282°C
Storage temp. Store at RT.
Solubility H2O: 1 M at 20 °C, clear, colorless
Form Powder/Solid
Color White
PRODUCT PARAMETERS
Eletronics (MEMS,PCB,Hybrid Circuit)
Parylene coating contains not only excellent dielectric properties, low dielectric loss and high dielectric strength but also good mechanical properties and corrosion resistance. Based on its superior dimensional stability and cryogenic property, the device with parylene can withstand high breakdown voltages like 1.5KV, 2.0 KV and even 10KV voltage without changing the dimension, Applying high purity Parylene as a passivation layer and dielectric layer can offer quite a safe and reliable protection.
Medical Devices
Parylene coating material Authorized by FDA with high purity, chemical inertness and Biocompatibility, is used for various kinds of implantation. The parylene improve the device lubricity on the surface and Biocompatibility, increasing the reliability. Instead of heating and solidification, the film is formed at the room temperature and no catalyst is needed. Thus, biosensor, nail, bone lamella and cardiac pacemaker will have better Biocompatibility, which will be more reliable in the biotic environment.
