Specifiation of Tantalum Tube
Product name Material SPEC. Outer diameterï¼?mmï¼? Inner diameterï¼?mmï¼? Length
(mm)
Tantalum Tube Ta1 (R05200),
Ta2.5W (R05252),
Ta10W (R05255) ASTM B521
2~80mm
1.5~75mm
Tantalum plate
Our specification of tantalum plate,tantalum foil;
Product name Material SPEC. Thickness
(mm) Width
(mm) Length
(mm)
Tantalum Foil Ta1 (R05200),
Ta2.5W (R05252),
Ta10W (R05255) ASTM B708 0.01-0.09 30-150
The application of tantalum rod: it is used to repair and close the cracks and defects of the fractured skull and limbs.
Benefits of tantalum rod: not only does tantalum do no harm to the human body, but the human body's muscles can also grow on it, which is medically called biosolubility.
Thepressure vessel is mainly made of pure tantalum, which has good corrosion resistance and shape. Ta2.5w and Ta10w tantalum alloys are used at higher strength.
The addition of tungsten into tantalum can improve the melting point of tantalum and the high temperature strength of tantalum.
point of tantalum is high and the density is high. It has good plasticity under annealing and stable performance at high temperature. After annealing, the tantalum material is soft and tough, which causes serious adhesion during cutting and causes the adhesive wear of the tool. Especially when the cutting speed is lower than 20m/min, the phenomenon of adhesive knife and tear is more serious. When the cutting speed is higher than 40m/min, the tearing phenomenon is greatly reduced. The cutting tool should be as sharp as possible and the cutting speed should not be too low. Generally, hard alloy is used as tool material, and YG8, YW2 and so on are commonly used.
Zirconium wire
Stock:dia1mm dia1.6mm dia2mm dia2.4mm dia3mm
Grade:Zr702
Moq:10kgs
Molybdenum plate ,molybdenum sheet
size:0.5-10mm THK *Width max 500*Lmm
Purity:99.95%
MOQ :10KGS
zirconium flange
Zirconium blind flange
Grade:Zr702
Moq 2PCS
Titanium rod ï¼?titanium bar
with diameter from 2mm to200mm length max 6000mm.
Moqï¼?5kgs
Pure tungsten rod
Tungsten is mainly used in powder metallurgicalï¼?lightingï¼?electronicsï¼?high-temperature furnaceï¼?aerospaceï¼?chemical and glass ceramics industries for its heatï¼?abrasion and corrosion resistance and chemical stability. Tungsten plateï¼?Tungsten Rodï¼?Tungsten wire and other tungsten parts
Producte Item Trade Mark Specification Standard
