Brass and copper prototype with highly polished
Copper CNC Machining,Custom Brass Cnc Parts
Our sheet metal rapid prototyping and rapid production services include a variety of tooled and manual manufacturing techniques and processes enabling us to realize some highly complex parts without expensive and time consuming production tooling.
PRODUCTÂ DESCRIPTION
At our sheet metal workshop we encompass bending, shearing, staking, laser, stamping and wire cutting, as well as CNC punching, CNC folding, drilling, tapping, countersinking and counter boring. Our team of highly experienced craftsmen have been manipulating sheet metal for years and come from a wide range of backgrounds.
Home appliance model with 3D painted
SLA 3D Printin,Home appliance model with 3D painted Manufacturer
In the early stage of prototyping, a 3D data model is built in the computer, which can directly dismantle the parts and components, instead of manual experience, and avoid manual omission through intuitive and visual electronic supervision.PRODUCTÂ DESCRIPTION
There are two main advantages to using 3D printing:
1. Shorten the production cycle and improve efficiency
In the early stage of prototyping, a 3D data model is built in the computer, which can directly dismantle the parts and components, instead of manual experience, and avoid manual omission through intuitive and visual electronic supervision.
Manual corrections can take hours or even days of work. The prototype can be quickly corrected by electronic adjustment. After the modeling is completed, it can be printed directly. It can be said that the production time is quite saved.
2, the threshold is low, adapt to the development of modern society
The threshold for traditional hand-made production is relatively high, and it requires the styling ability of the prototype. There are also many tricks in the actual production process. For example, "partition", it is not only OK to assemble, so is the part beautiful? Late volume capacity cannot be achieved? Many factors, such as the difficulty control of large-scale painting, should be considered.
The requirements of 3D modeling relative to pure hand-made are much lower. As long as you can operate 3D software more skillfully and have a certain modeling foundation, you can create a hand through 3D printing. Now it is also because it is relatively high-handed, and it can maximize its advantages in the later stage, and can adapt to the future development needs of the hand-held industry.
CNC machining rapid metal prototyping
CNC Rapid Metal Prototypeï¼?High Quality CNC machining rapid metal prototyping
In fact, most of the actual machining errors are caused by unreasonable machining processes, and the basic machining processes are guaranteed (such as â??pre-roughing, first-faced rear holes, first large-faced small facesâ?? or fixtures in milling CNC machiningâ??
PRODUCTÂ DESCRIPTION
How to make the size of aluminum parts more accurate?
1.Processing technology
In fact, most of the actual machining errors are caused by unreasonable machining processes, and the basic machining processes are guaranteed (such as â??pre-roughing, first-faced rear holes, first large-faced small facesâ?? or fixtures in milling CNC machiningâ?? Reduce the number of clamping times, try to use the combination of fixtures and other basic processing technology details, to minimize the machining error caused by iron filings on aluminum parts, because the aluminum parts are very soft, the excluded iron filings can easily cause machining errors in aluminum parts. . For example, in the FANUC or Central China Machining Center, the deep hole should be used as much as possible with the G83 command, so that the iron filings can be discharged instead of the G73 command.
2. Cutting three elements: cutting speed vc, feed rate f, cutting depth ap and tool compensation
In simple terms, under the premise of ensuring the processing quality and tool wear, the adjustment parameters fully exert the cutting performance of the tool, so that the cutting efficiency is the highest and the processing cost is the lowest.
In the CNC lathe, there are also factors such as cutter head wear compensation.
3. Tool setting
Inaccurate tool setting is also a factor in size error. Therefore, try to choose a good edge finder. If the machine has an automatic tool aligner, it is better.
Precision Aluminum prototype with CNC machined
CNC Anodized Aluminum Prototype,Aluminum Metal Prototype
Cutting - sawing, shearing, or chiseling (manual and automatic); torching and CNC laser, milling or water jet cutting
PRODUCTDESCRIPTION
CNC metal work includes:
-Cutting - sawing, shearing, or chiseling (manual and automatic); torching and CNC laser, milling or water jet cutting
-Bending
-Assembly - welding, adhesive binding, or crimping.
Stainless Steel:SS201,301, 304, 316, 17-4PH, SS303, SSs304, SS316 etc.
(Polishing Plating Sandblasting Laser engraving)
Steel:Q235, 20#, 45# 40cr 416Stainless iron etc.
(Blackened, Zinc/Nickel/Chrome plating,Carburized Hot treatment)
Aluminum: Q235, 20#, 45# 40cr 416Stainless iron etc.
(Natural/Hard anodize,Powder coating,Sandblasting,Plating Brushing,Polishing,Laser engraving)
Car Bumper Mold
Car bumper with Small batch production,Vacuum Casting Mold
Ruitai mold has a range of tooling and polyurethane materials to suit any project and budget. Due to the low temperatures and pressure involved, RIM offers a cost effective economic alternative when compared to other methods for molding large parts in lower volumes.
Car door prototype with vacuum casting
CNC Car Door Prototype,Vacuum Casting Service
Before making a CNC silicone hand model, you need to make a prototype. The prototype can use the more common ABS material, CNC machining can be.
PRODUCTÂ DESCRIPTION
Three simple steps to make a vacuum manifold/vacuum injection molding machine:
1, prototype
Before making a CNC silicone hand model, you need to make a prototype. The prototype can use the more common ABS material, CNC machining can be.
2, silicone mold
After the prototype is ready, start making silicone molds.
After eight hours of drying, the silicone mold was cut open and the prototype was taken out. At this point, the silicone mold is ready.
3, injection type
The liquid gum material is injected into the silica gel mold and dried. The transparent silicone mold has a service life of approximately 20 molds.
The first step: using CNC, SLA, or mud sculpture to make a prototype, do the nozzle
Step 2: Enclose the prototype with a board to prepare for the mold
Step 3: Pour the liquid silicone which has been vacuumed by a vacuum machine into the mold to cover the product.
Step 4: Put the mold into the oven for baking, so that the silicone mold can be accelerated and solidified.
Step 5: Take the prototype out of the mold
Step 6: According to the materials required by the product, vacuum the material and copy the finished product.
Building design work with SLA printed
3D Printing Mold,Metal Material With 3D Print
The photocuring technology mainly uses photosensitive resin as a material, and transmits the temperature to the liquid resin through ultraviolet light or other light source through multi-lens reflection, and then solidifies and solidifies layer by layer to finally obtain a complete product.
PRODUCTÂ DESCRIPTION
It is not uncommon for 3D printing technology to be used for modeling, but it is a rare thing to build a house. In October this year, a villager in Jiangxi built a house with 3D printing technology. The entire house is constructed of steel and 3D printing technology, without a brick and without the need to dismantle the building formwork. 3D house construction has a shorter construction period and lower prices than traditional buildings. The same four-story building, the traditional way to take at least 4 months, single-square meter budget is over a thousand; using 3D printing technology only 20 days, 600 yuan per square meter. And because the house is poured in one piece, it has great advantages in earthquake resistance.
Imagine if 3D printing technology is more mature, can those rooms that were previously only in the imagination can be printed? In the future, you may be able to build a fairytale castle yourself.
Metal Stamping Die parts
CNC milling Metal Stamping,Metal Stamping Die parts
PRODUCTÂ DESCRIPTION
There are several processing methods for stamping dies:Â
1. Manual grinding and polishing, which is a relatively traditional mold surface processing method, mainly relying on the operator's experience and technology to process, but manual polishing is time consuming, inefficient, and some Complex surfaces or joints can be more difficult to handle.Â
2, mechanical finishing - grinding processing. Common grinding equipment includes surface grinders, internal and external cylindrical grinders, tool grinders, etc. In order to ensure accuracy, CNC machining is generally used. According to the shape of different parts, choose the appropriate type of grinding machine. The plate type parts are made of surface grinder, and the arc surface and rotary surface parts are made of internal or external cylindrical grinder or tool grinder.
 3, mechanical finishing - CNC milling machine. The stamping and drawing die surface processing method not only has high processing efficiency, but also has good processing quality, and can be used in other aspects besides a cavity having an inner acute angle and a very narrow and deep cavity. It has become the mainstream process of stamping die processing in foreign countries, and China is also actively developing.
 The stamping and drawing die should ensure the accuracy of the position of each related part in the mold, increase its resistance to bending and anti-offset, and avoid uneven wear of the mold.
PMMA plastic prototype
CNC PMMA Plastic Prototype,Rapid Plastic Prototype Manufacturer
Our high seed precision CNC Milling and turning services are perfect for both one off prototypes and low mass volume production runs. We machined parts from many different plastic and metal materials on our state of the art machining finishes available CNC Machining is a very versatile option.
PRODUCT� DESCRIPTION
Our high seed precision CNC Milling and turning services are perfect for both one off prototypes and low mass volume production runs. We machined parts from many different plastic and metal materials on our state of the art machining finishes available CNC Machining is a very versatile option. Fast, accurate and competitively priced whilst delivering superior surface finishes from a massive range of material options, CNC Machining is the backbone of Ruitai mold'S services
Silicone rubber with vacuum casting
Silicone Rubber Molding,China Silicone rubber with vacuum casting
Mold silicone, specially used for large-scale reproduction of resin, ceramic, plastic, gypsum, cement, candle, soap and other crafts, with high number of times of mold overturn, long service life of the mold, resistance to burning and high temperature, strong resistance to tearing.
First, crafts mold silicone use crafts mold silicone, specializing in resin, ceramics, plastics, plaster, cement, candles, soap, lighting and other handicrafts mass reproduction, addition molding and condensation type are suitable for handicraft mold, is an RTV Curing silicone rubber at room temperature. Second, resin crafts mold silicone advantage
Stainless steel prototpye with chrome plated
CNC Chrome Plated Stainless Steel
PRODUCTÂ DESCRIPTION
Ruitai mold mainly engaged in CNC processing hardware and plastic hand:
Manufacturing scale: household appliances, electronic computer, digital communication, communication products, medical equipment, fitness equipment, security products, automotive products, copper, aluminum and iron CNC machining; appearance processing:
Fuel injection, silk screen, sand blasting, electroplating, hot stamping, ray carving, brightening, rubber lacquer, drawing, oxygen, etc.
Aluminum watch mock-up
Aluminum Metal Prototype,Prec
Aluminum parts with rapid tooling
PRODUCTÂ DESCRIPTION
For the problem of the injection mold processing process, there are generally four stages, first preparation stage, second surface processing, reheating stage, and final debugging identification stage. Each stage plays a key role, such as the preparation stage. It can be imagined that it is the same thing to have a plan and an implementation plan. In the preparation stage, we need the overall requirements of the mold, design, parts, and process. , materials, finished product estimates, etc. are written and determined. Heat treatment stage, an important part of quality assurance
