Transformer Capacity and Loss Tester
Transformer Oil Tester
I Introduction
Transformer Capacity Testing Instrument is specialized in bad power users evading basic electricity secretly adds capacity problems and is a high precision instrument specially used for the measurement of the transformer capacity and parameters. This product uses color LCD monitor, English display, simple and quick menu operation, man-machine interface is friendly. The internal of the instrument has a rechargeable battery and it can work without external power source. A fully charged battery can be continuously measured more than 100 sets. In addition, the instrument can provide three-phase precise 50Hz sine wave AC test power without the external three-phase test power, the pressure regulator, up flow reactor and other auxiliary equipment in measuring the capacity and transformer load loss, thus greatly improving the efficiency of the work.
This is a multi-functional measuring instrument, which is equivalent to two common devices: activity transformer capacity tester and transformer parameter tester. It can be used for test transformer capacity, model, no-load current, no-load loss, load loss, impendence voltage and so on.
This product has many advantages such as small, light , high accuracy, stability, simple operation and so on. It can replace the multi-meter method to measure the transformer loss and capacity with simple wiring and convenient testing so that the work efficiency can be greatly improved.
Function
1. We can measure a variety of distribution transformer, power transformer capacity instead of the additional power. It is more convenient and efficient.
2.Combined with the power, voltage, boost up flow and other equipment, it measures various transformer no-load current, no-load loss, impedance voltage, load loss and so on.
3.All results are automatically carried out relevant correction. You only need to input the related parameters (such as temperature, load adjustment coefficients), then the instrument can automatically correct such as waveform deformity correction, temperature correction, correction of non rated voltage, rated current correction.
4.The maximum voltage is up to 750V and the maximum current is up to 100A. It is equipped with protection circuit.
5.The voltage and current range can be very flexible and easy to expand.
6.It has large screen, high brightness LCD display, English menu and operation tips, friendly man-machine interface and wide temperature, brightness adjustable type LCD screen, which can adapt to the different temperature.
Transformer Oil Filtration Machine
PLC Fully Automatic Transformer Oil Purification Machine
Transformer Oil Filtration Machine
Vacuum Transformer Oil Filtration Plant
1. Famous brand PLC control, fully automatic operation,
high precise filtering for insulating oil and transformer oil filtration.
2. Enhance the oil performace to protect the machine.
3. Low energy consumption.
4. Water content: 3ppm, impurity content: m, gas content: â0.1%.
5. Breakdown Voltage: 75KV
Product Introduction
This oil purification plant is applied to purify various of unqualified insulating oils including aging transformer oil,
specially for the power which is above 110KV, mutual inductor oil, switch oil and so on. Also it can inject the
insulating oil into the transformers on-line.
Features:
1. High vacuum: High point-Vacuum 5pa Working-vacuum 35pa
2. High absorption speed: Absorption speed power 333L/Sr.
3. Duplex 3D stereo-evaporation: eliminating the liquid water quickly.
4. UK G technology by which the trace water that is show chain, such as dissolved water, can be removed effectively.
5. Distinctive removing impurities system filtering through double FH trapezoidal network and absorbing by high polymer without the mechanical power.
6. Carbon fiber infrared heating system that can make the oil contains zero sum of ethyne after the treatment.
7. Especially applied to vacuum oiling and drying for power transmission equipments which are over 110KV.
8. The oil of any grades can be treated on line at the working site.
Vacuum Transformer Oil Filtration Plant
Dielectric Oil Purification Machine
Transformer Oil Filtration Machine
Application scope
ZYD series vacuum transformer oil filtration machine is a typical product, develop and produced by HOPU Oil Purifier Manufacturer as especial equipment for dehydration, degassing, purification process of various kind of insulation oils in electrical transformers and circuit breakers etc,. it is designed on vacuum drying principle, accurate fine filtration and other modern technique .
Characteristics
1. Precise multi-stage filtration system adopts high quality filtering materials and big capacity of containing pollutants to remove solid mechanical impurities in the oil effective.
2. The constant electric heating system is easy to operate the oil temperature increases quickly and temperature is even and constant, suitable for different kinds of oil.
3. High quality filtration element which can resist acid, alkali and high temperature, the mechanic strength is high and service life long
4. No environment pollution function in many cases
Guarantee value:
Moisture PPM 5
Gas content % 0.1
Impurity size ¼1 (no free carbon)
Breakdown voltage kV70
IFT dynes/cm
Acid value mgKOH/g0.03
Dielectric loss factors tg´(90 C)0.001
Double stage vacuum Transformer oil Purifier for Series ZYD
Transformer Oil Filtration Machine
Dielectric Oil Purifier
Application:
It is mainly used for purifying the insulating oil, transformer oil, mutual oil, switch oil, dielectric oil and so on.It can quickly remove water, trace water, gas, particles as well as acetylene, hydrogen, methane and other harmful ingredients from oil.It adopts the double stages vacuum system, which can improve the machines working vacuum value highly, Series ZYD effectively improve oil's dielectric strength, effectively to make sure electric equipments working safely and normally. Series ZYD oil purifier is particularly suitable for treating high-grade transformer oil, supper-voltage transformer oil and new transformer oil. It can be used for more than 110V substation live line work on site. Meanwhile, Series ZYD oil purifier can be used as independent vacuum source with functions of vacuum drying and vacuum oiling.
Feature:
1.Double-stage High Vacuum dehydration and degassing and removing impurities from the used transformer oil.
2.Eliminate acidity, sludge, free carbon, discoloration elements, and other soluble matters in the oil, which decays the transformer.
3.It can vacuum filling oil to transformers, and it can vacuum dry transformers and on-line operation with transformer.
4.The standard ZYD system is designed for purifying and filtering oils in workshops, in storage tanks or directly in transformers (energized or de-energized transformers).
The oil technical data after treatment:
1.Gas content is less than 0.1%
2.Impurity size is less than 1μm without free carbon
3.Water content is less than 3 part per million
3.Oil dielectric strength (breakdown voltage) is more than 75KV
4.Acidity value is less than 0.01 mg KOH/g
5.Dielectric loss factors at 90C is less than 0.001
Super High Voltage Transformer Oil Purifier,decolorization,degassing,dehydration machine
Untra High Voltage Transformer Oil Treatment Plant
Untra High Voltage Transformer Regeneration Recycling Plant
Application & Function
Ultra-high Voltage Grid is regarded as Electric High Way which features big capacity, distance and low loss. Until now, there are 750KV, 1000KV, 660KV, 800KV direct current in our nation's ultra-high voltage grids. Considering its safety, it has extremely requirement on insulating oil in transformer, mutual inductor and reactor, the ZYD Series Ultra-High Voltage Oil Treatment Equipment, manufactured by our company is effective in particles refining, vacuum degassing and oil-water separation. This equipment has been successfully applied in 750KV alternating current and 800KV key projects. And every oil treatment index reaches the national ultra-high voltage oil purification standard.
Transformer oil maintenance is the key to transformer reliability, performance and longevity. Your transformerâ??s insulati Middle Type Vacuum Insulation Oil Recycling Machine ng oil should be free from moisture, dissolved gases and particles that accumulate as the oil ages. Even some new oils may require treatment to limit these contents to acceptable levels.
CE ISO Vacuum Transformer Oil Purifier Machine designed to remove contaminants (particulate, water, gasses, acids, etc.). We are a design, engineering and manufacturing company capable of application customization for best solutions.
Feature:
1. Especially for removing water from transformer oil, such as free water, trace water and so on by the double stage vacuum system for high voltage oil.
2. Remove gas, air content from the old high voltage transformer oil by vacuum degassing system.
3. Remove impurities, tiny particles, acidity, sludge, free carbon, other soluble oil decay products and discoloration substances by 3 stages of filters (Primary filter, secondary filter, fine filter).
4. Independent vacuum oiling system for transformers, this oil purifier can also vacuum dry transformer and on-line operation with transformers.
5. Designed for processing high voltage insulating oils in workshops, onsite power stations, purifying oil in oil storage tanks or directly in transformers(energized or de-energized transformers).
6. Efficient electric heating system, heating uniformity, less power consumption, safe, and reliable.
7. Double-infrared liquid level sensor, pressure protective system and foaming detecting and eliminating to ensure machine operation easily and safely.
8.Adopt interlocked protective system, which connect oil pump, heater and liquid level sensor, avoiding blank heating, blank pumping.
Advantage:
High Voltage Transformer Oil Purifier Machine Model ZYD is particularly suitable for filtering high-grade transformer oil, super-voltage transformer oil and new transformer oil. It can be used for filtration of more than 110V substation live line work onsite.
Ultra High Voltage Vacuum Transformer Oil Filtration Machine (1000KV, ±800KV, 750KV, ±660KV project) ( two stage vacuum chamber) for Series ZYD-U
Untra High Voltage Transformer Oil Treatment Plant
Vacuum Transformer Oil Purifier
Application:
ZYD-U Series Ultra-high voltage Transformer Oil Filtration Machine with Double Vacuum Distillation is for Ultra-High Voltage transformers like 500KV, 750KV, 1000KV, it is mainly used to improve the properties of insulation oil for 66KV to 500KV project. It can remove trace water, gas, particulate matters etc. from the insulating oil effectively and rapidly so as to boost performance of transformers, circuit breakers, mutual inductors, cable and capacitors which has insulation system.
ZYD-U series specialize in purifying branded oil, insulating oil of high voltage and super high voltage transformer. Additionally, it is suitable for treating low viscosity lubrication oil.
Features:
1.ZYD-U series Ultra-High Voltage Vacuum Transformer oil purifying machine has one pot with two-stage vacuum-segregating space, it come into being different pressure so as to keep oil line balance between two stages.
2.The pump of this product is adopted vacuum-pump imported from Europe, which have preceding level in the world, and with high air pump speed so as to get high working vacuity.
3.As the new technology, vacuum-segregating employs particular spinning disk and stainless steel machine with dehydration and air pump so that enlarge the area of segregating and coming to three-dimensional evaporation.
4.Using new type of heating equipment , it can reduce heating burden and extend oil life.
5.Oil level control adopt photoelectric way which the main components is imported from Switzerland and have features of sensitive control, exactitude so much as feel the spume of oil, mount the equipment to prevent super high and super low oil level. Spurting oil phenomena is never appeared.
6.As the clients requirement, they could choose equipment which their components were all or partly imported from overseas. Include touching screen and flow gauge is can be selected according to customers. This series could meet different kinds of customers need.
7. ZYD-U series Ultra-High Voltage Vacuum Transformer oil purifying machine equips filter assemblies imported from U.S.A. and it has large filtering area, strongly absorbent-dirt capability, high filtering precision.
8. Whether clients choose the oil pump from domestic or abroad, they all must be airproofed by our factory, moreover running without noise and leakage. extended oil life
Mobile Trailer Wheel Mounted Vacuum Transformer Oil Filtration Plant for Series ZYM
Mobile Trailer Type Vacuum Transformer Oil Purifier
Vacuum Transformer Oil Filtration
Application:
Series ZYM Mobile Trailer Wheel Mounted Vacuum Transformer Oil Filtration Plant is designed for purifying used or aged transformer oil, super high-voltage transformer oil, switch oil and other insulating oils.
According to fieldwork requirement, this machine equips the car wheels, which can be easy to move to any work point by traction. It is special suitable for purifying the transformer oil which locate in different fields. This machine can recover the seriously transformer oil. The treated transformer oil can reuse again in transformer.
With single-axle or double-axle or wheels, able to move from one location to another in order to recondition multiple tanks/batches
Features:
1. Mobile (trailer) type, completely closed structure, waterproof, dustproof, move easy.
2. Installation of car tyres, Bridge shock absorber, braking system and steel welding of entire trailer guarantee 60km/h speed.
3. Dealing with unqualified insulating oils, rapidly remove water, gas, particles from oil
4. Multi-stage precision filtration system, mesh filtration combined with molecular adsorption technologies
5. Efficient electric heating system, heating uniformity, less power consumption, safe, and reliable.
6. Double-infrared liquid level sensor, pressure protective system to ensure machine operation easy and safely.
7. Adopt interlocked protective system, which connect oil pump, heater and liquid level sensor, avoiding blank heating, blank pumping, oil leak and electricity leak. If there is any fault, machine will be power off automatically.
Centrifugal Oil Purifier Separator Diesel fuel Oil Centrifuge Plant
Cleaning Centrifugal Oil Purifier , fuel Oil Purification Machine, HFO Diesel oil lubrication oil Centrifugal oil treatment plant
Marine Centrifugal Oil Purifier
Application
HOPU CYA Series centrifugal oil purifier is a centrifuge separator which can separate solid matters from two kinds of different density liquids on a continuous basis and also can separate two liquids simultaneously. By reducing process cycle time and labor requirements, these separators offer high cost efficiency in liquid clarification and reclamation, solid-liquid separation and its classification, recovery and thickening of solids and in other such processes.
Apply for lubrication oil, fuel, etc. two phase, three phase separating Effective separate substances and solids from liquids.
Fuel treatment, Lube oil treatment, Marine, Power stations, Oil field industry.
Centrifuge separator mainly apply to treat fuel, lubrication oil and other mineral oils in marine diesel engines and diesel generator sets in which contain water and mechanical impurities. HOPU CYA series will result in reducing mechanical wear of the diesel engines and other machines so as to greatly extend lifetime of machinery.
CYA series can also be applied to separate two different liquids with different proportion and being immiscible.
Vacuum Hydraulic Oil Purifier, Oil Purification plant for injection molding machine
Hydraulic Oil Filtration Plant
hydraulic oil purification systems for injection molding machine
1.effectively break emulsification for high water content hydraulic oil
2.lube oil cleaning system
Newly hydraulic and oil filtration systems,emulsion oil purifier
Why do we choose oil purifier?
After a period of operation, owing to its exposal to oxygen and mixed with water, copper and iron and other foreign materials and high working temperature acceleration , transformer oil will oxidize and lose its original property and cannot be used effectively again. So HUHU oil purifiers can efficiently remove water, dirt, gases and other foreign impurities from oil, such as de-electrical oil, turbine oil, lubricating oil, engine oil, hydraulic oil, compression oil, mechanical oil, quenching oil, heat conducting oil, gear oil etc; so as to maintain its lubricating and insulating property, then to reduce components wear, and cut down oil expenses.
APPLICATIONS:
1. The model TYA is widely used in the fields of mechanism, metallurgy, mine, petroleum, chemical etc.
2. The unit can purify various kinds of lubricants as hydraulic oil, machinery oil, coolant oil, refrigerator oil, gear oil, gasoline engine oil, diesel engine oil, heat treating oil, etc.
3. The unit can quickly remove free and dissolved water, gases, impurities and volatile matter like ammonia gases from lubricants, increase used lubricants quality and recover performance to guarantee the correct working performance of hydraulic system, power system, and lubrication system.
TECHNICAL FEATURES:
1. With strong impurities filtration ability and large-area, mass and deep precision filtration material can remove the tiny and fine impurities from used lubricants. With PM filter can filter off ferreous impurities.
2. Unique degassing and dewatering system, adopts mature film evaporation and 3D flash distillation technology, and multi-stage oil water separating technology, can quickly remove free and dissolved water and gases.
3. Electrical heating device is the optimized pipeline design, to ensure the unique heating and stable oil temperature.
4. Automatic constant temperature control device, automatic liquid level control device, automatic defoaming device, automatic pressure protection device and excellent configuration can ensure the equipment in high performance.
5. Work online with unattended operation and the indicator lights display the running status.
6. The complete unit adopts the safety interlock device. The discharge oil pump, vacuum pump are interlock to the heating device to avoid adverse effect of misuse.
7. Compact design, low noise, easy operation, longtime free maintenance, low power consumption, running cost saving.
Vacuum Turbine Oil Purifier,Emulsion Oil Purification Plant
Vacuum Turbine Oil Purification Plant
Series TY vacuum turbine oil purifier mainly be used for purifying unqualified turbine oil, especially for serious emulsion turbine oil, it can quickly and efficiently break emulsification, separate water, gas, particles from oil. So that makes sure quality of treated oil to achieve new oil's standard, ensure whole turbine system work safely.
This equipment use a special polymer materials as filter medium combined with vacuum separating technology to break emulsification, dewater, degas, remove acid and particles, make the badly turbid turbine oil becomes clear transparent. Series TY is a perfect turbine oil purifier for live line work; also it can purify low viscosity hydraulic oil and lube oil.
Features:
1. Special polymer materials as filter medium with the functions of broken emulsion, dewatering, removing particles
2. Duplex-Stereo film evaporation technology, equips with unique and advanced dewatering, degassing components, can rapidly and effectively separate water, gas from oil.
3. Multi-stage precision filtration system, mesh filtration combined with molecular adsorption technology.
4. Efficient electric heating system, heating uniformity, less power consumption, safe, and reliable.
5. Double-infrared liquid level sensor, pressure protective system to ensure machine operation easy and safely.
6. Adopt interlocked protective system, which connect oil pump, heater and liquid level sensor, avoiding blank heating, blank pumping, oil leak and electricity leak. If there is any fault, machine will be power off automatically.
7. Work online with stream turbine, hydraulic turbine.
Turbine Oil Purifier Available Style
1. Fixing type,mobile type with four wheels and mobile type with trailer.
2. Normal appearance type,shelf-covering type and explosion-proof type.
3. Avaliable in different color.
Technical Parameters:
Index Name Unit TY-10 TY-20 TY-30 TY-50 TY-100 TY-150 TY-200 TY-300
Flow rate L/h 600 1200 1800 3000 6000 9000 12000 18000
Working vacuum MPa -0.06~-0.095
Working pressure MPa 0.4
Temperature range 20 ~80
Power supply 380V 50HZ 3Ph (As per users option)
Vacuum Turbine Oil Polishing and Flushing Machine for Series TY
Vacuum Turbine Oil Purification Plant
Vacuum Turbine Oil Polishing and Flushing Machine for Series TY
Application:
TY Series Vacuum Turbine Oil Polishing systems can remove free, emulsified, and dissolved water quickly and effectively to improve system performance and reduce your operating and maintenance costs. It aims at turbine oils nature of high water content, easy emulsifiable and high impurity content, and make the oil recover to the new oil's nature.
It can also mounted on high pressure pump for flushing requirements
Series TY oil purifier is widely used for filtering turbine lubricating oil in electric power, metallurgical, chemical engineering industries. It is good at emulsion breaking, dehydration and removing soap, gelatin, acid, pigment and metal particulates in emulsified turbine oil and low-viscosity lubricating oil as well as turbine oil used in other machinery and electric power equipment.
Feature:
1. Breaking emulsification thoroughly with high- molecule polymeric material.
2. Dewatering very effectively with once and for two steps dehydrating method. It can thoroughly clear away the liquid water, free water and 80% dissolved water
3. With distinctive removing impurities technique filtering through double FH trapezoidal network and absorbing by high polymer material, this machine can make the Ã?3 equal or surpass 200 and make the cleanness lower grade 6(NAS1638).
4. With the trapezoidal, spiral, automatic back flushing system.
5.With the advanced dielectric condensation devices.
On-line oil purification can be carried out with turbine or water turbine automatically without any person.
Technical Parameter
item unit TY-10 TY-20 TY-30 TY-50 TY-100 TY-150 TY-200
Flow rate L/h 600 1200 1800 3000 6000 9000 12000
Working vacuum degree Mpa 0.06 0.095
Working pressure Mpa 0.3
Running temperature 40 70the temperature of turbomachine below 55
Heating power KW 14 16 18 30 45 55 60
Total power KW 16 18 20 33 48 61 71
Inlet/outlet caliber mm 25 25 25 32 42 50 50
Solid Palm Oil Treatment Plant,Animal Cooking Oil Decolor Purifier
Cooking Vegetable Oil Cleaner
TYD series oil decoloration machine can quickly remove out impurities, water, gases and recover the oil color to original color.
This machine uses our special additive to discolor, which is purely natural and has high efficiency.
It is installed thermal insulation material, it is a good oil purifier for solid oils,animal oil
It can treat cooking oil,Palm Oil,Animal Oil, coconut oil in oil field, mine, metallurgy, electricity, transportation, manufacturing, food industry. The treated oil is very clear and transparent.
And it is asked by customer to pre-treat the used cooking oil before further biodiesel.
Features:
1.It is installed with thermal insulation material, it is a good oil purifier for solid oils,animal oil
2.This machine adopts the the latest micro-filtration technology,which is a multi-functional purification system with vacuum oil filter, fine filter and decoloring device.
3.It uses pure physical treatment to remove water, gases, impurities and decolor,which will not affect the composition and performance of the oil.
4.Equipped with chain protection device, the machine is easy to operate, safe and reliable.
Parameters Unit TYD-1 TYD-2 TYD-3 TYD-5 TYD-10 TYD-15 TYD-20 TYD-30 TYD-50
Treatment Capacity Ton/day(8 hr)) 1 2 3 5 10 15 20 30 50
Power Supply 380V/50HZ/3PhaseCustomizable
Working Noise dB(A) 65
Trouble-free Working Time H 4000
Continuous Working Time H 150
Inlet (outlet) caliber mm 25 25 25 32 42 42 50 50 60
Weight kg 1500 2000 2500 3000 3500 4000 4500 5000 5500
Size Length mm 1800 1850 1900 1950 2000 2200 2300 2400 2500
Width mm 1300 1350 1400 1450 1500 1600 1600 1700 1800
Height mm 2300 2300 2300 2400 2500 2700 2700 2700 2700
Guarantee value Color L 1-3
Impurity m 1(Customizable)
Water ppm 100
Gas content 0.1% 15(GB/F 7305)
Cleanliness grade 6(NAS1638)
Our company export all kinds of Oil Purifier Machine we have a whole set of quality Oil Filtration system. If you have interested in our Oil Treatment Plant such as Oil Purification Machine, Vacuum Dielectric Oil Filtration Plant, Hydraulic Oil Filtration Plant, ect. Please feel free to contact us.
Cooking Oil Filtration Machine for Series COP
Cooking Vegetable Oil Cleaner
Cooking Oil Filtration Machine for Series COP
The cooking oil filtration machine is special for filtering used cooking oil, Coconut Oil,dirty vegetable oil , groundnut oil, olive oil,palm oil etc.
It can remove particle ,separate moisture, gas, free fatty acids, volatile odoriferous material,odor, and wax, foam in the waste oil.
The treated oil is clean, limpidity, and good smell. It is a good purification machine for Fry food factory, oil restaurant, cooking oil factory, biodiesel factory,vegetable oil factory, and waste oil collecting store.
According to the treated oil usages, you can choose different machine body. For edible usage, we suggest you choose stainless steel body; For industrial use, we suggest you choose carbon steel body. If your oil contains too many impurities,we suggest you choose a press filter.
Feature:
1.Strong ability to filter the impurity,strong capability of breaking emulsification. We adopt the high quality filter materials, which has a good function in anti-corrosive, thermos table, mechanical strength. Especially, the precision of eliminates impurity is high and the service life is long. Also, it has a large volume for storing the impurities.
2.The combination of coalescing separation and vacuum dewatering
3.Advanced dielectric condensation device
4.With H.P.M high polymeric absorbing material
5.Using the 3D Stereo-Evaporation technology, which can separate the odor and gas from the oil quickly .
6.This machine installs the new pressure protector, which can control the temperature automatically; also it can drain water on line by the waterseparator device. So it is easy to control this machine.
Parameters
Item Unit COP-10 COP-20 COP-30 COP-50 COP-100 COP-150 COP-200 COP-300
Flow Rate L/min 10 20 30 50 100 150 200 300
Work Vacuum MPa -0.06 ~ -0.095
Work Pressure MPa 0.4
Temperature 0 ~ 100
Power supply 380V,50Hz, 3 phase (or as needed)
Work noise dB(A) 75 75 75 78 78 78 80 82
Heating power KW 36 40 45 72 80 90 120 135
Total power KW 38 42 47 75 87 101 135 147
Inlet/outlet mm 25 25 25 32 42 50 50 60
Net weight Kg 450 550 600 750 850 1000 1200 1500
Dimensions mm 1500 1000 1200 1500 1050 1600 1500 1050 1650 1600 1150 1700 1750 1250 1800 1900 1600 1950 1900 1700 2000 2100 1700 2100
Guarantee Value
Item Guarantee indexes
Moisture content 20 PPM
Demulsification value New oil15min,running oil30min
Impurity size 1 micron (no free carbon)
Gas content 0.1%
Clean degree 4 Grade (NAS1638)
Our company export all kinds of Oil Purifier Machinewe have a whole set of quality Oil Filtration system. If you have interested in our Oil Treatment Plant such as Oil Purification Machine, Vacuum Dielectric Oil Filtration Plant, Hydraulic Oil Filtration Plant, ETC. Please feel free to contact us.
Light Diesel Gasoline Oil Purifier for Series TYB
Gasoline Diesel Oil Purifier
Light Diesel Gasoline Oil Purifier for Series TYB
Application:
It is for treating the diesel oil,fuel oil,gasoline oil for the generators.
This machine integrates fine filter, high efficiency demulsification and dehydration into one body. This machine, which can remove large amount of water without heating, even 50% water, creates the fastest dehydration speed,
It can quickly separate water from the oil, which even contains half water, to attain cleanness of NAS 6 grade, Convenient using with the go-cart model designed. In a word, it is be used for fast removal of water and sediment in fuel oil or light oil which contains large amount of water.
It can not only remove the impurities, water, and acid matters, organic and inorganic acid effectively, but also can remove guargum,surf, colloid and other sludge can be removed together.
Feature:
1 TYB series purifier adopt special oil water separator which requires no heating, offering 20 times higher water removing efficiently than over other types of purifiers.
2 As no heating is needed, the additives in the oil are well prevented from degradation or deterioration.
3 Easy-to-operate, water can be discharged online automatically without the presence of operators.
4 Low operation cost, 20%-40% lower than vacuum purifier, centrifugal purifier and filter press.
Technical Parameters:
Parameters Unit TYB-10 TYB-20 TYB-30 TYB-50 TYB- 80 TYB- 150 TYB-200 TYB-300
Flow rate L/min 10 20 30 50 80 150 200 300
Working pressure Mpa 0.3
Working noise Db(A) 65-75
Running hours without malfunction H 4000
Continuous running hours H 150
Water content ppm 3
Particle Size um 0.5
Cleanliness NAS 6
Power KW 0.75 0.75 0.75 2.2 2.2 3 3.5 3.8
Size mm 700*570*1200 700*600*1200 800*600*1200 850*650*1200 900*680*1200 1100*750*1200 1300*750*1200 1400*800*1200
Weight Kg 80 90 105 135 150 185 200 230
Our company export all kinds of Oil Purifier Machine we have a whole set of quality Oil Filtration system. If you have interested in our Oil Treatment Plant such as Oil Purification Machine, Vacuum Dielectric Oil Filtration Plant, Hydraulic Oil Filtration Plant, ect. Please feel free to contact us.
Portable Oil Filtering and Flushing Machine for Series JL
Portable Oil Filter Machine
Portable Oil Filtering and Flushing Machine for Series JL
Application
Series JL portable oil filtering machine can do precision filtering, remove the tiny or big sized impurity, particleï¼?sediments,and sludes from waste oils. Such asl lubricant oil, hydraulic oil,turbine oil,gear oil,and industrial oils etc. It can also as a pre-filter for all oil treatment equipments
Series JL Oil Flushing machine is composed of high pressure pump, oil storage tank and precise filtering, this machine is an ideal machine for cleaning the dirty oil pipes of those hydraulic equipments,Gear ,turbine equipments as well as collecting and purifying the waste oil come back from the pipes. It can efficaciously remove impurities including sludge and carbon matters from oil, so as to recover the oil nature and make the machine work normally and effectively, for maintaining the hydraulic equipment from blocking and corrupting by impurities. It will greatly prolong the oil and equipments service life.
Feature
1.Using high-quality filter, pollutant carrying capacity, corrosion resistance, high temperature resistance, high mechanical strength, high precision filtering
2.The oil can get to the new oil standard after filtering the mechanical impurities in it
3.Provide the best performance and the most compact design
4.High efficiency, low noise, long life
Insulation Oil Tester for Series HJT (test oil breakdown voltage dielectric strength)
Transformer Oil Tester
Insulation Oil Tester for Series HJT (test oil breakdown voltage dielectric strength)
? Introduction
IIJ series fully automatic oil tester is apply to test the insulating oil's dielectric strength, which is designed as per the requirement of IEC156 Testing Method of Insulation Oil Medium Strength, which via proper programming, has got functions of auto boosting, step down, stirring, display and print out. After breakdown of oil medium, HV break off will operate within 10 seconds to enable an auto isolation of control system partly; this effectively safeguards the personnel security and equipment safety.
The automatic oil tester adopt industrial SCM to control, which is applied to integrate circuit, new model I/0 connection, particular testing and anti-jamming technology which largely improve the machines capacity .
Main features:
1.Simple operation, automatically (can be finished just press on key)
2.Menu controlled. Input data can clear
3.Can store 99 groups oil testing data which is convenient to reading and print. The testing data can keep 100 years under the condition of power off.
4.System time can go on running under power off;
(The system time just for reference can not be the standard of timing)
5.Can upgrade software through RS232
6.High capacity of anti-jamming and high precision of testing.
7.Small volume, light which operated in the open air very conveniently.
8.The set shall be provided with smooth and continuous of output voltage between zero and maximum having no distortion of waveform.
9.Audio sound and visual signal will indicate at the instant of sample failure.
?¡ Technology and parameter data
1.Power Supply: 220 ±10% VAC, 50HZ
2.Output: 60 kV,70KV, 80 kV, 100 kV
3.Capacity: 1.2 kVA (for 60kV), 1.6 kVA (for 80 kV), 2.0 kVA (for 100 kV)
4.Pressure increase rate: About 2 KVA/S
5.Pressure testing speed: 3%
6.Break down sensitivity :
Transformer Evacuation Set, Transformer Vacuum Pumping Drying Unit
Transformer Vacuum Evacuation Set
Description:
Transformer Evacuation Set,Vacuum Pump System Series VPS is a new type of vacuuming equipment for transformer vacuum injection,evacuation,drying. It is widely used in the process of producing vacuum condition for various equipment. Its vacuum pressure can reach much lower than any other products in the same field.
Application:
It is widely used in the vacuuming process in the production, installation and maintenance of many electric power equipments, like electric power transformer, capacitor etc., and is also used in the technical process of industrial production, such as vacuum drying, vacuum distillation, vacuum wielding, vacuum coating etc.
It is not suitable for the vacuum process for air and gases containing too much powder, water and oxygen as well as explosive, corrosive, poisonous and chemical substances.
Characteristics:
1.The machine adopts special Roots pump and vacuum pump, so the vacuum pumping speed and pressure, are obviously better than any other devices.
2.Working vacuum range and maximum vacuum degree are superior to other products.
3.It is installed with special vacuum gauge for accurate indication.
4.It adopts automatic vacuum relay for automatic control.
5.Stable and reliable operation, low noise, and easy to move
Technical Parameter VPS-30 VPS-70 VPS-150 VPS-300 VPS-600 VPS-1200
Gas Pumping Speed (L/s) --- for Roots (Mechanical Booster) Vacuum Pump 30 70 150 300 600 1200
Capacity (CU.MTR/HR) --- for Roots (Mechanical Booster) Vacuum Pump 108 252 540 1080 2160 4320
Oil Trace moisture titrator Tester/ Analyzer for Series HST
Oil Moisture Tester
Oil Trace moisture titrator Tester for Series HST
Overview
Karl Fischer Coulomb titration is the most reliable method to detect trace moisture for different substances, which was utilized successfully by HOPU trace moisture titrator. Whats important, this instrument is able to work more reliably and conveniently by using the most advanced control circuit and 32 bit embedded microcontroller processor as the master control core and utilizing embedded mini operating system. Character with fast analyzing speed, simple operation, high precision and strong automatism, the trace moisture titrator has been widely used in the industry of petroleum, chemical, power, railway, pesticide, medicine and environmental protection.
Instrument features
Utilizing 32 bit embedded microcontroller processor as the master control core and embedded mini operating system.
Be stable and reliable because of constant pressure detection, high precision and rapid measuring speed.
Simple operation and convenient digital calculation due to color touch screen and full digital keyboard.
Four calculation formulas are included, which can meet the different requirement of customer.
Miniature thermal printer with time record make searching more convenient.
New profile is designed according to the ergonomics.
Creative and optimal operating software will bring a different touch experience for you.
. Technical parameters
Titration methodCoulometric titrationCoulomb analysis
DisplayColor LCD touch screen
Electrolytic current control0400mA automatic control
Measurement scope0ug200mg
Sensitive valve0.1µg H2O
Accuracy10µg1000µg±3µg
More than 1mg but not greater than 0.3%
PrinterMiniature thermal printer
Power supply220V±10%50Hz
Power 40W
Ambient temperature540
Ambient humidity 85%
Our company export all kinds of Oil Purifier Machinewe have a whole set of quality Oil Filtration system. If you have interested in our Oil Treatment Plant such as Oil Purification Machine, Vacuum Dielectric Oil Filtration Plant, Hydraulic Oil Filtration Plant, ect. Please feel free to contact us.
Various Vacuum Oil Purifier Oil Filter Element Parts For Different Stage Filtering
Oil Filter Element
Various Vacuum Oil Purifier Oil Filter Element Parts For Different Stage Filtering
Application:
This oil filter element is mainly suitable to oil purifier machine for remove the impurity and particles at vacuum state. It can always be used in transformer oil purifier,hydraulic oil purifier,lubricating oil purifier,turbine oil purifier,cooking oil purifier etc.This filter element is mainly composed of fiberglass ,stainless steel,aluminum,It also can be used for oil water separate equipment,air compressor, and the lubrication system of electric power industrial,metallurgical industrial,petroleum chemical industrial,machinery and equipment industrial etc.The 50~100 filter can be rewashing.
Product Description:
1. Mass media: general hydraulic oil phosphate ester hydraulic oil emulsion water - glycol
2. Material quality: glass fiber filter paper - BN stainless steel woven mesh - W wood pulp filter paper - P stainless steel sintering network -
3 .Filtration precision: 1 u to 100 u
4. Work pressure: 21 bar to 210 bar
5. Working medium: general hydraulic oil, hydraulic oil, phosphate ester emulsion, water - ethylene glycol
6. Working temperature: - 30 ~ + 110
7. Sealing material: fluorine aprons Nitrile butadiene rubber
Technical parameters:
Index name Unit 0.5 1 3 5 10 20 50 80 100
Flow rate L/s 10~400L/s
Filtration pressure MPa 0.3~0.4MPa
Working temperature - 30 ~ + 100
Features Fireproof, Static protection
Material Fiberglass Stainless steel Mesh
Top caps Aluminum alloy
End caps Galvanized
Weight Kg 2.2kg
Dimension mm 120mmx480mm
Our company export all kinds of Oil Purifier Machinewe have a whole set of quality Oil Filtration system. If you have interested in our Oil Treatment Plant such as Oil Purification Machine, Vacuum Dielectric Oil Filtration Plant, Hydraulic Oil Filtration Plant, ect. Please feel free to contact us.
Centrifugal Oil Purifier Separator Diesel fuel Oil Centrifuge Plant
Cleaning Centrifugal Oil Purifier , fuel Oil Purification Machine, HFO Diesel oil lubrication oil Centrifugal oil treatment plant
Marine Centrifugal Oil Purifier
Application
HOPU CYA Series centrifugal oil purifier is a centrifuge separator which can separate solid matters from two kinds of different density liquids on a continuous basis and also can separate two liquids simultaneously. By reducing process cycle time and labor requirements, these separators offer high cost efficiency in liquid clarification and reclamation, solid-liquid separation and its classification, recovery and thickening of solids and in other such processes.
Apply for lubrication oil, fuel, etc. two phase, three phase separating Effective separate substances and solids from liquids.
Fuel treatment, Lube oil treatment, Marine, Power stations, Oil field industry.
Centrifuge separator mainly apply to treat fuel, lubrication oil and other mineral oils in marine diesel engines and diesel generator sets in which contain water and mechanical impurities. HOPU CYA series will result in reducing mechanical wear of the diesel engines and other machines so as to greatly extend lifetime of machinery.
CYA series can also be applied to separate two different liquids with different proportion and being immiscible.
Features
Full automation possible with PLC automatic control panel.
Centrifugal separation requiring no filter media.
High reliability drive train system backed by delivery of over 1,000 units a year.
Bowl design with superior separation performance and with good response to discharge loads.
Pilot valve regulates total/partial discharge of solids.
Super partial discharger (option) minimizes liquid loss and maximizes thickening of solid
fraction for discharge.
Vibration-proof design realizes long working life.
Full automation possible with PLC automatic control panel(Optional).
Separated volume Rated value 2000 1500 2000 3000 6000 1500
(L/H) 0# Diesel oil 2200 1600 2200 3500 6500 1600
30# SAE LO. 1200 800 1200 1800 3600 800
180Cst/50HFO / 700 1100 1600 3500 700
Power(KW) Separator 2.2 1.5 3 5.5 11 1.5x2
Oil feed pump 1.5 1.5 1.5 1.5 2.2 1.5(1.5x2)
E-heating / / / / / /
Others 0.2 0.2 0.2 0.2 0.2 0.2
Marine Centrifugal Oil Purifier, Heavy Fuel Oil Dehydration Plant
Marine Centrifugal Oil Purifier, Heavy Fuel Oil Dehydration Plant, Ship Oil Treatment Machine, Centrfuge Bilge Oil Cleaning System
Marine Centrifugal Oil Purifier
Application:
HOPU'S CYA Series Marine centrifugal oil purifier is mainly used for remove the free water and impurities from the oil,it can be applied to heavy diesel oil, lubricating oil, transformer oil, hydraulic oil, turbine oil clarification and purification to slow wear of diesel engine or other types of machines, and extend the service life of the machine and oil,also can be applied for some of vegetable oil,plant oil which canâ??t dissolve in water and the density is lower than water, such as peanut oil,palm oil,sunflower oil,turpentine oil etc.HOPU always been apply for mineral oil separator: Remove the water and mechanical impurities for fuel oil, diesel oil, lubricating oil, transformer oil, mineral oil, etc. Also can be used to separate emulsion liquid .
Features:
1. Using high-speed disc centrifuge, separation more thoroughly.
2. Have self-discharging function,automatic trash, continuous and efficient.
3. High speed centrifugation to separating water and oil grease and sludge impurities
4. It can quickly separate water and impurity form the oil to ensure the oil quality
5. Using screw oil pump, lower noise, more stable performance.
6. Great ability to break emulsification through high polymer materials
7. PLC programmable controller, enabling unattended,the operation is simple, safe and reliable.
8. Have integrated protection system (filter blocking alarm, motor overload alarm, power fault phase, protection, over voltage and low voltage protection etc.)
Technical Specification of Centrifuge
Fuller's earth Transformer Oil Regeneration Plant
Transformer Oil Regeneration Machineï¼?transformer oil
Oil Regeneration Extends Transformer Unit Life
HOPU's mobile regeneration system restores transformer oil by removing acidity, sludge, soluble oil decay products and improves oil colour with Fuller's earth treatment technology. When the treatment is complete, the regenerated oil meets or exceeds international standards for new oil with lower acidity and improved tan delta, interfacial tension, and oxidation stability. The cellulose insulation and internal components of the transformer also benefit from the flushing effect of multiple passes of hot regenerated oil, which helps remove decay products and sludge from internal surfaces.
Advantages of Oil Regeneration
· Extends the transformer life by restoring the qualities of the transformer oil to be similar to new oil condition
· Oil Regeneration is much less costly than changing new oil
· Minimal downtime as a result no revenue loss as Oil Regeneration can be performed â??on-inline or liveâ??/ energized transformer
· Environmentally friendly as the existing oil is reused. There will also be no hazard from oil spills and PCB contamination, including the trouble with the disposal of old oil
· Oil Regeneration removes the sludge build up and deposited on the internal core and coils of the transformer, which a traditional oil change will not
· Oil Regeneration can be continuously performed in most weather conditions and will not run the risk of exposing the internal transformer core to adverse weather conditions during an oil change
Introduction:
ZYD-I Dielectric Transformer Oil Treatment Regeneration Machine is applied to process transformer oil and insulating oil from power plant, power station, electric power company, power transmission equipment, transformers, industrial and mining enterprises, especially suitable for on-site installation, maintenance and purifying high level new oil, or running oil from big power transmission and distribution equipment and transformers on national main power transformation grid, which is above 110-750KV. This special vacuum oil water separator can shorten the oil treatment period for transformer installation and maintenance.
Single Stage Vacuum Transformer Oil Purifier
Vacuum Insulation Oil Purifierï¼?
Application:
ZY Single-Stage Vacuum transformer oil refinery machine is mainly used to improve the properties of insulation oil. It can remove trace water, gas, particulate matters etc. From the insulating oil, electric oil and transformer oil effectively and rapidly so as to boost performance of transformers, circuit breakers, mutual inductors, cable and capacitors which have insulation system.
Edges:
1.Compare with Double-Stage Transformer Oil Purifier, ZY haven't Roots pump, only have vacuum pump.
2.Eliminates water, gas and impurities effectively by utilizing the unique technology of 3D Stereo-Evaporation, hence improve the voltage withstand strength and the quality of oil, which ensures a safe operation of power generation equipment.
3.It can inject the insulation oil into the transformer devices, and has the function of electrification online operation.
4.Enhance the value of breakdown voltage greatly..
5.Easy handling and maintenance.
6.Adopts double infrared liquid control automatically system to control inlet and outlet the oil smoothly.
7.Lower maintenance and replacement expenses.
8.ZY series equipment can be used for testing breakdown voltage of transformer oil and print the result automatically.
9.Low maintenance and replacement expresses.
10.High performance security system including pressure protection device and automatic temperature controller makes purifier operate safely.
11.Utilizes coacervation technology, coalescing technology, separating technology and refined purification technology. To remove free, soluble water, carbon, free and dissolved gases and particulate matters from insulating oil effectively and rapidly.
12.This machine can work independently, also it can work with the oil regeneration system that can eliminate the acid, the color and reduce the PH value effectively, then further enhance the insulation value of oil.
Optional:
A : Without Enclosure, open and Stationary type
B : With Enclosure, Cubicle and Stationary type
C : With Skid base type
D : Mounted on casters
E : Mounted on Single-axle Trailers (Pneumatic tyre, Speed selectable)
F : Mounted on Double-axle Trailers (Pneumatic tyre, Speed selectable)
You May also be interested in:
A: Transformer Oil Tester, Testing the insulating oil's dielectric strenght
B: Vacuum Pumping Set, pumping the transformer
C: Moisture Meter, measuring the water content in the transformer oil
D: Flow meter, measuring the flow oil quanity through the machine
Vacuum Insulation Oil Filtration Machine for Series ZY
Vacuum Insulation Oil Purifier
Vacuum Insulation Oil Filtration Machine for Series ZY
Application
This purifier is applied to treat various of unqualified or used insulation oils including aging transformer oil, mutual inductor oil, switch oil,cable oil.
This type of Insulation Oil Filtration Machine can degas, dewater by low vacuum distillation,removing the impurities of insulating oil quickly and effectively. It improves the value of voltage value, oil dielectric strength, extends oil service life and make sure electrical equipment work safely. The power station and mine mainly use the machine to deal with transformer oil,mutual inductor oil, switch oil and cable oil.
Features:
1.This machine is small, hi-efficient conveniently. And it can live operated with electrical, vacuum oiling the power equipment and dry moisture of power equipment.
2.Distinctive removing the impurities technology filtering through double FH trapezoidal network and absorbing by high polymer without the mechanical power.3. This machine adopts a high effective vacuum and the internationally advanced stereo-evaporation technology
4.The oil of any grades can be treated on line at the working site
5.This machine can work independently; also it can work with the oil regeneration system.
Technical Parameter
Parameters Unit ZY-10 ZY-20 ZY-30 ZY-50 ZY-70 ZY-150 ZY-200 ZY-300
Flow rate L/h 600 1200 1800 3000 4200 9000 12000 60000
Working vacuum MPa -0.06 -0.095
Working pressure MPa 0.4 0.4 0.4 0.5 0.5 0.5 0.5 0.5
Breakdown voltage KV 55 55 55 60 60 60 60 65
Moisture PPM 5
Gas content % 0.1
Impurity content 5
Temperature range 10 80
Power supply 50HZ380V(or as needed)
Working noise dBA 61 63 70 70 75 70 70 70
Heating power KW 11 13 15 30 48 52.5 57.5 60
Total power KW 12.5 14.5 16.5 33.5 51.5 57.5 65.5 68
Inlet/outlet caliber mm 25 25 25 32 40 50 50 60
Enclosed Weather Proof Type High Vacuum Insulation Oil Filtration Unit ,Transformer Oil Purifier with carbon steel cabinet
Enclosed Cabinet Type Transformer Oil Filtration Plant
Vacuum Transformer Oil Recycle Plant,Oil Separation System, Insulating Oil Filter Machine with carbon steel Housing Cover
Weather Proof Outside Use in Raining Enclosed Available
-On line use -Functional -Convenient -Easy Move & Oil Fast Cleaning
This oil purifier is a maintenance system for transformers and Transformer oil. ZYD transformer oil filter can keep transformers and transformer oil in a normal and good running condition. So that to save the new oil cost and transformers replacement cos
Application:
This oil purification plant is applied to filter various of unqualified insulation oils including aging transformer oil, insulation oil, specially for the power which is above 110KV, mutual inductor oil, switch oil and so on. Also it can inject the insulating oil into the transformers on-line.
Features:
1. Double-stage High Vacuum dehydration and degassing and removing impurities from the used transformer oil.
2. Eliminate acidity, sludge, free carbon, discoloration elements, and other soluble matters in the oil, which decays the transformer.
3. It can vacuum filling oil to transformers, and it can vacuum dry transformers and on-line operation with transformer.
4. The standard ZYD system is designed for purifying and filtering oils in workshops, in storage tanks or directly in transformers (energized or de-energized transformers).
The oil technical data after treatment:
1. Gas content is less than 0.1%
2. Impurity size is less than 1m without free carbon
3. Water content is less than 3 part per million
3. Oil dielectric strength (breakdown voltage) is more than 75KV
4. Acidity value is less than 0.01 mg KOH/g
5. Dielectric loss factors at 90°C is less than 0.001
mobile trailer mounted vacuum transformer oil purifier,insulation oil filtration ,dielectric oil purification system
Mobile Trailer Type Vacuum Transformer Oil Purifier
Function
ZYD-M is movable trailer type transformer oil purifier, easily move for long distance. It is a creative design introducing domestic and international advanced technology. It is applied to process transformer oil and insulating oil from power plant, power station, electric power company, power transmission equipment, transformers, industrial and mining enterprises. It is quite suitable for onsite installation,maintenance and purifying high level new oil, or running oil from big power transmission and distribution equipment and transformers on national main power transformation grid, which is above 110-750KV. It can shorten the oil treatment period for transformer installation and maintenance.
Applications:
According to fieldwork requirement, this machine equips car wheels, which can be easily moved to any work point by traction. It is especially suitable for purifying transformer oil which locates in fields.
Feature
1. ZYD-M moves easily and can be used both indoor and outdoor.
2. And it has double-stage high pumping speed vacuum system, multistage stage vacuum analytical separation system, it can quickly separate out water, gases, impurities, polar substances and other deteriorated materials.
3. Adopting the three-dimensional flash evaporationï¼?dehydration and degassing technology, it high efficiently separates water, gases from the oil, making the breakdown voltage rapidly increase to above 75KV.
4. Adopting the complex high speed degassing spiral flow structure, oil gas separate dual channel technology, redissolution technology in anti oil gas separation, it quickly removes various organic hydrocarbon gases, ensuring no acetylene and hydrogen in oil.
5. Adopting carbon fiber infrared heating, grouped ultra low surface load, PID constant temperature control and dual temperature flow protection technology. Inside the machine installed the the diameter increase oil flow direction turning overflow technology to prevent â??dead oil areaâ??, over-temperature and drying.
6. Adopting multistage high β value compound filtration system, linear coupling filter seal, it can effectively filter even the tiny particles mechanical impurities.
7. Specially made precise oil pump with low noise meeting environmental protection requirement.
8. Online filtering oil; with nobody watching is okay, and it can also be used for vacuum oiling the transformers etc and drying its hot oil.
9. Equipped with advanced infrared liquid level auto control system, auto defoaming control system, pressure protection system and safety interlock control to ensure that the equipment work for long time, safely and reliably
Marine Centrifugal Oil Purifier, Heavy Fuel Oil Dehydration Plant
Marine Centrifugal Oil Purifier, Heavy Fuel Oil Dehydration Plant, Ship Oil Treatment Machine, Centrfuge Bilge Oil Cleaning System
Marine Centrifugal Oil Purifier
Application:
HOPU'S CYA Series Marine centrifugal oil purifier is mainly used for remove the free water and impurities from the oil,it can be applied to heavy diesel oil, lubricating oil, transformer oil, hydraulic oil, turbine oil clarification and purification to slow wear of diesel engine or other types of machines, and extend the service life of the machine and oil,also can be applied for some of vegetable oil,plant oil which cant dissolve in water and the density is lower than water, such as peanut oil,palm oil,sunflower oil,turpentine oil etc.HOPU always been apply for mineral oil separator: Remove the water and mechanical impurities for fuel oil, diesel oil, lubricating oil, transformer oil, mineral oil, etc. Also can be used to separate emulsion liquid .
Features:
1. Using high-speed disc centrifuge, separation more thoroughly.
2. Have self-discharging function,automatic trash, continuous and efficient.
3. High speed centrifugation to separating water and oil grease and sludge impurities
4. It can quickly separate water and impurity form the oil to ensure the oil quality
5. Using screw oil pump, lower noise, more stable performance.
6. Great ability to break emulsification through high polymer materials
7. PLC programmable controller, enabling unattended,the operation is simple, safe and reliable.
8. Have integrated protection system (filter blocking alarm, motor overload alarm, power fault phase, protection, over voltage and low voltage protection etc.)
Technical Specification of Centrifuge
Model Bowl Speed(rpm) Capacity(Per Hour) Running Load(Watts) Witdh Front to Back Height
250 7300 500 4 850 850 1200
400 7038 1500 7.5 1500 1100 1550
500 6600 5000 15.5 1772 1500 1855
550 6200 8000 18.5 1970 1560 1970
700 4500 35000 55 2097 1897 2384
Our company export all kinds of Oil Purifier Machine we have a whole set of quality Oil Filtration system. If you have interested in our Oil Treatment Plant such as Oil Purification Machine, Vacuum Dielectric Oil Filtration Plant, Hydraulic Oil Filtration Plant, ect. Please feel free to contact us.
Vacuum Hydraulic Oil Filtration Machine for Series TYH
Hydraulic Oil Filtration Plant
Vacuum Hydraulic Oil Filtration Machine for Series TYH
TYH Series Hydraulic Oil Filtration Machine is specially used in the treatment and regeneration of fire-resistant hydraulic oil in the big and medium-sized thermo electric generator speed-governing system.
It can remove free water, emulsified water ,suspended solids and dirt from hydraulic oil.
Hydraulic lubricating oil treated by this machine contains so low emulsification value, few water content and impurities that it can be used repeatedly in the highly precise hydraulic lubricating equipment
Enhances the oil quality, restores the lubricating oil viscosity, augments the flash point and improves the operational performance. Guaranteed the hydraulic system and the dynamic system, the lubrication system normal operation, so the machine is suit for many lines, such as the mine, metallurgy, electric power, transportation, manufactures and so on.
Features:
1.Strong capability of breaking emulsification, make the turbid and emulsified hydraulic oil become limpid and clear.
2.The combination of coalescing-separation filter elements and vacuum dehydrator.
3.Strong ability to filter the impurity, which can filter the particles completely.
4.It has the back flush system, which can clear impurities automatically.
5.Advanced dielectric condensation device
6.This machine installs the new pressure protector, which can control the temperature automatically;
7.We adopt the high quality filter materials, which has a good function in anti-corrosive, thermostable, mechanical strength. Especially, the precision of eliminates impurity is high and the service life is long. Also, it has a large volume for storing the impurities.
8. The unique degas and dehydrator system: Using the Stereo-Evaporation technical, which can separate the water and gas from the oil quickly by the Multi-level water-oil separation technology.
Technical specs( It will be changed as customer's requirements)
Item Unit TYH-10 TYH-20 TYH-30 TYH-50 TYH-100 TYH-150 TYH-200 TYH-300
Flow Rate L/min 10 20 30 50 100 150 200 300
Vacuum Degree MPa -0.06 -0.095
Working Pressure MPa 0.4
Temperature 0 100
Power Supply 3phrase,50Hz, 380V(or as needed)
Working Noise dB(A) 75 75 75 78 78 78 80 82
Heating power kW 36 40 45 72 80 90 120 135
Total power KW 38 42 47 75 87 101 135 147
Inlet/outlet caliber mm 25 25 25 32 42 50 50 60
Weight Kg 450 550 600 750 850 1000 1200 1500
Dimension Length mm 1500 1500 1500 1600 1750 1900 1900 2100
Width mm 1000 1050 1050 1150 1250 1600 1700 1700
Height mm 1200 1600 1600 1700 1800 1950 2000 2100
Parameter After Purification
Transformer Oil Dielectric Strength Tester
Transformer Oil Tester
HJT Transformer oil tester conforms to international standard IEC-156, can be used for power frequency dielectric break down test on the transformer oil, capacitor oil, electric device, insulation tool, electric manufacturer and etc. It??s widely used in the fields of power system, petroleum, chemical industry, railway station, power station, electric manufacturer and etc.
Features:
1.Self detecting function. The regulator could return to zero start automatically.
2.Controlled by micro computer, easy to operate.
3.Build-in printer.
4.Automatic magnetic bar stir, to eliminate uneven and bubble of oil.
5.100 test data storage, can display the ambient temperature and humidity.
6.Over voltage, over current, limitation protection functions, to ensure the safety of operators.
6.RS232 interface.
Specification:
Power supply: AC 220V ±10%, 50 Hz ±5%
Test voltage: : AC 0 80KV 0-100kV at option
Limitation current: 5mA
Test precision: 1%
Voltage boosting rate: 0.5-5KV/s (adjustable)
Presetting: 1-9 times
Stirring time: 0-1 minute 9 seconds
Static time: 0-10 minutes 39 seconds
Environmental temperature: 0-35
Relative humidity: 75%RH
Power: 300VA
Electrodes Gap Size: 2.5mm
Our company export all kinds of Oil Purifier Machinewe have a whole set of quality Oil Filtration system. If you have interested in our Oil Treatment Plant such as Oil Purification Machine, Vacuum Dielectric Oil Filtration Plant, Hydraulic Oil Filtration Plant, ect. Please feel free to contact us.
Vacuum Gear Oil Purifier, Compressor Oil Purification Machine PLC
Vacuum Lubricant Oil Purifier
TYA Series Lubricant Oil Purifier are mainly designed to handle the water infiltration, emulsification and particle pollution of various industrial oil such as gear oil,compressor oil , cooler oil,mechanical oil, hydraulic oil, caused in the process of their production, transportation and usage.
It is solely designed for lubricating oil is made according to nature of high impurity of gear lubricating oil including hydraulic oil and mechanical oil, which has features of short time for treatment and high efficiency, enabling fast removal of oil's water, gas, impurity and volatiles such as alcohol, gasoline and ammonia gas. Hence the quality of oil is improved, viscosity of lubricating oil, flash point and other performances are recovered which ensures a correct running of hydraulic system, power system and lubricating system.
Feature:
1) Perfect capacity of removing impurities. The special filters made of special materials which can effectively and rapidly eliminate various impurities, water and gas.
2) Automatic reverses flushing ability, which automatically cleans the mass impurities withheld by the purifier.
3) Advanced medium heating absorption and condensation system
4) Pressure protection, auto heating temperature control, and device of auto separation of condensate water, easy to handle, safe and reliable.
5) Top quality purification material, large capacity of handling impurity, corrosion-proof, high temperature resistant, good mechanical strength, high precision of impurity removal and long lifetime.
6) Unique water/gas removal system, which adopts stereo-evaporation technology, multi-oil water separation technology, enabling fast removal of water, gas and impurity in oil.
7) Imported parts are used for all electric system, which ensures operation of the equipment with high performance
8) Lowly noisy oil pump is specially made
Vacuum Lubricant Oil Filtration Machine for Series TYA
Vacuum Lubricant Oil Purifier
Vacuum Lubricant Oil Filtration Machine for Series TYA
TYA series Vacuum Lubricant Oil Filtration Machine is applied to recover and purify various high-precision lubricating oil,hydraulic oil, compressor oilgear oil, heat treatment oil,cutting fluids,quench oil and various industrial oils etc
It can remove free water,dissolved water, free gas, acid, emulsification, and eliminate impurity, big and small particulates,dust, and foam in the waste oil.
It can also eliminate metallic impurity,colloid,slude and the volatile matter (for example ethyl alcohol, gasoline, ammonia and so on).
It enhances the oil quality, restores the oil viscosity, augments the flash point and improves the operational performance. Guaranteed the hydraulic system and the dynamic system, the lubrication system normal operation, so the machine is suitable for many lines, such as the mine, metallurgy, electric power, transportation,drilling and so on.Â
Features
1. Strong capability of breaking emulsification.
2. The combination of coalescing separation and vacuum dewatering.
3.The unique degas and dewater system: Using the Stereo-Evaporation technical, which can separate the water and gas from the oil quickly by the Multi-level water-oil separation technology.
4. Advanced dielectric condensation deviceÂ
5. With H.P.M high polymeric absorbing material
6.Strong ability to filter the impurity,strong capability of breaking emulsification. We adopt the high quality filter materials, which has a good function in anti-corrosive, thermos table, mechanical strength. Especially, the precision of eliminates impurity is high and the service life is long. Also, it has a large volume for storing the impurities.
Technical specs( It will be changed as customer's requirements)
Item Unit TYA-10 TYA-20 TYA-30 TYA-50 TYA-100 TYA-150 TYA-200 TYA-300
Flow Rate L/min 10 20 30 50 100 150 200 300
Vacuum Degree MPa -0.06 ï½? -0.095
Working Pressure MPa â?¤0.4
Temperature â?? 0 ï½? 100
Power Supply 3phrase,50Hz, 380V(or as needed)
Working Noise dB(A) â?¤75 â?¤75 â?¤75 â?¤78 â?¤78 â?¤78 â?¤80 â?¤82
Heating power kW 36 40 45 72 80 90 120 135
Total power KW 38 42 47 75 87 101 135 147
Inlet/outlet caliber mm 25 25 25 32 42 50 50 60
Weight Kg 450 550 600 750 850 1000 1200 1500
Dimension Length mm 1500 1500 1500 1600 1750 1900 1900 2100
Width mm 1000 1050 1050 1150 1250 1600 1700 1700
Height mm 1200 1600 1600 1700 1800 1950 2000 2100
Parameter After Purification
Gas Dew Point Detection Instrument/Trace Water Content Tester
Transformer Oil Tester
Application:
Dew point uses imported alumina or polymer film capacitive dew point sensor. It measures the trace moisture content in various trace gases. It is suitable for some online analysis occasion where the moisture content control requirement is quiet strict such as petrochemical, natural gas, industrial gas, semiconductor industry, drying industry, food industry, power industry, machinery manufacturing, air separation industry, and pharmaceutical industry.
dew point tester Feature
Portable design:light,portable,convenient to use.
Rapid measurement:when start work,it takes a short time on measurement,and get the humidity value.
Low gas consume:it just consume 2L(101.2kPa)in a test.
Self-locking joint:the self-locking joint is imported from Germany,safe,reliable,leakproof.
Data memory:high-capacity design,save up to 50 test data.
Legible display:dew point,Micro moisture(ppm),ambient temperature,ambient humidity,time,date,battery,etc,can be read from the LCD.
RS232 port:can be connected with serial printer,carry on data printing.
Built-in power supply:built-in 4Ah rechargeable lithium battery,it can work continuously at least 10 hours.
dew point tester Specification
dew point Ranges -60 ~+20
Accuracy ±1(-60~+20)
Test time(+20)
