It is widely used in air blower, warm air direr, dry line machine, plastic welding gun, line blower, shoes machine , canister blower etc kinds of air heating device, and medicine, leather, shoes making, hand snack, chemical industry etc.
Main Features
1.Quick raising temperature and heating speed
2.No bright, anti-oxidation, corrosion resistant, acid-proof
3.Small volume and high insulation property
4.High heating efficiency and long use-life
5.Ceramic material can resist 1400 degree C
6.Swedish Brand Heating Wire
7.With CE certificate
8.Pin Pure copper plating with spring, fix firmly
9.Voltage, power and size can be customised
Description of Industrial Thermocouple RTD PT100 Temperature Sensor with 1/4" Thread
Product Name :Thermocouple
Type :PT100
Temperature Range :0�°C-150�°C
Probe Size : 0.5 x 10cm / 0.2" x 3.9" (D*L)
Thread Diameter: 8mm/ 0.31"
External Material Plastic, Metal, Rubber
Total Length 1M / 39.4"(we can customize other length)
Fork Terminal Spacing 0.5cm
Ceramic Band Heaters provide long life and use less wattage (because of insulation) in plastics extrusion and injection molding applications. These band heaters are constructed with a stainless steel shroud enclosing high quality ceramic knuckles through which run coiled high temperature nickel-chromium element wire.
Ceramic Band Heaters provide long life and use less wattage (because of insulation) in plastics extrusion and injection molding applications. These band heaters are constructed with a stainless steel shroud enclosing high quality ceramic knuckles through which run coiled high temperature nickel-chromium element wire.
FSF panel radiators are ceramic infrared radiators with a low overall height. They are produced using a full-pour casting ceramic process and are designed for operating temperatures up to 720 C and surface ratings up to 64 kW/m².
Compared to other LaiYuan panel radiators, which have the standard socket, the overall height of the FSF radiators, measured from the radiation surface up to the mounting plate, has been reduced by approximately 45 %.
FSF series radiators can be used universally. The low overall height of the radiators enables space-saving installation, for example, which may be required to retrofit machines.
FSF radiators are available in four designs and cover the power range from 60 W to 1500 W. They have the customary market dimensions and can there- fore be replaced with radiators with corresponding properties if the requirements change.
Design Features
1. High temperatures resistance
2. Unheated straight section
3. Precise temperature control 4. Fast response
5. Choice of lead orientation 6. Choice of lead protection
6. Longer heat lifetime 8. Round, square and rectangular cable
7. High watt densities 10. Rugged, durable construction
8. Available with built-in thermocouple
Silicone Heating Plates beneficial to take out liquid and coagulum from drums easily by heating, such as adhesive, oil, asphalt, paint, paraffin wax, oil and various resin raw materials in the drum. It can make viscosity of materials descending and uniform by heating the drum, and reduce the power of pump. Therefore, the heater does not be restricted by seasons, and can be used throughout the year.
The heating element is a Nickel-Chromium or Copper-Nickel alloy wire, this resistance is embedded between two layers of silicone impregnated glass cloth, making drum heater. A fitted stainless steel spring makes the mounting easy.
A dial thermostat graduated from 30°C to 150°C allows the temperature maintenance adjustment. Or digital thermostat 0--280 degree C can adjust and display temperature as your need.The drum heater is weatherproof.
Stainless Steel mica band heater was made of stainless steel sheet, mica sheet, resistance wire/ strip , stainless steel sheet standard thickness is 0.3mm to 0.5mm, and in the middle , resistance wire/ strip wrap around the mica sheet, and add 1-2 pieces mica sheet again each side for insulation. They can be made to be many different kinds of shape as your requirement.
It is the ideal solution for high watt densities and high operating temperature applications, especially for the plastics industry. Band heaters can be found in several types of dimensions, wattage, voltages and material. It is an inexpensive form of heating solution to external indirect heating.
All products are using SUS304 or SUS321 seamless stainless steel pipe, MOG holder and MGO head with high temperature 1800C,99% MGO rod,overseas high temperature MGO powder, Cr20Ni80 resistance wire ,Ni-Mn lead wire and Silicone Rubber wire .It suits for mold heating . Large-scele production with competitive price,Good-look appearance of the product and excellent quality .
Stainless Steel mica band heater was made of stainless steel sheet, mica sheet, resistance wire/ strip , stainless steel sheet standard thickness is 0.3mm to 0.5mm, and in the middle , resistance wire/ strip wrap around the mica sheet, and add 1-2 pieces mica sheet again each side for insulation. They can be made to be many different kinds of shape as your requirement.
All products are using SUS304 or SUS321 seamless stainless steel pipe, MOG holder and MGO head with high temperature 1800C,99% MGO rod,overseas high temperature MGO powder, Cr20Ni80 resistance wire ,Ni-Mn lead wire and Silicone Rubber wire .It suits for mold heating . Large-scele production with competitive price,Good-look appearance of the product and excellent quality .
An pipeline heater is composed of an immersion heater covered by an anti-corrosion metallic vessel chamber. This casing is mainly used for insulation to prevent heat loss in the circulation system. Heat loss is not only inefficient in terms of energy usage but it would also cause unnecessary operation expenses. A pump unit is used to transport the inlet fluid into the circulation system. The fluid is then circulated and reheated in a closed loop circuit around the immersion heater continuously until the desired temperature is reached. The heating medium will then flow out of the outlet nozzle at a fixed flow rate determined by the temperature control mechanism.
Advantages
Flange-form heating core;
Thestructure is advanced ,safe and guarnateed;
Uniform, heating,thermal efficienchy up to 95%
Good mechanical strength;
Easy to install and disassemble
Energy saving power saving,low running cost
Multi point temperature control can be customized
The outlet temperature is controllable
Specification: New Condition Air Heater Finned Heating Element Oven Dryer are a mineral insulated, metalsheathed electric resistance heater.Finned electric heating tube is made of seamless stainless steel tube, highquality MgO, electric wire and then winded with stainless steel. Finnedtubular heating elements are available for various industrial & domestic applications. We built every technically possible heaters as per your requirement.
Material of Pipe: SUS304,SUS316,SUS321,Incoloy840, Incoloy800
Material of fin: SUS304,SUS430 or As Required
Advantages: New Condition Air Heater Finned Heating Element Oven Dryer
1.Low capital costs
2.Easy control of heat output
3.High thermal efficiency
4. Low need for maintenance
5. Long service life
6. Safe to operate
7. Extensive use
8.Customized to meet your specific application need New Condition Industrial Electric Oil Fin Heater
All products are using SUS304 or SUS321 seamless stainless steel pipe, MOG holder and MGO head with high temperature 1800C,99% MGO rod,overseas high temperature MGO powder, Cr20Ni80 resistance wire ,Ni-Mn lead wire and Silicone Rubber wire .It suits for mold heating . Large-scele production with competitive price,Good-look appearance of the product and excellent quality .
Diameter
3.0mm to 85mm
Diameter tolerance
0mm~0.08mm
Length tolerance
�±1mm
Cold zone
5~15mm from lead wire; 3~10mm at the bottom
Max surface loading
40w/cm^2
Voltage
1.5V~440V
Insulation resistance
500ohm
Temperature tolerance
�±3C
Shape
Straight/ L/ Square/ Split type/ Special-shaped
Material of lead wire
Silicone rubber; PTFE; High Temperature Fiberglass; Metal hose protection; Metal braided
Thermocouple wire
K type,J type,E type ,PT100
Method of lead wire
Internal wire(Swaged) and External wire (Cripmed)
It is the ideal solution for high watt densities and high operating temperature applications, especially for the plastics industry. Band heaters can be found in several types of dimensions, wattage, voltages and material. It is an inexpensive form of heating solution to external indirect heating.
Silicone Heating Plates beneficial to take out liquid and coagulum from drums easily by heating, such as adhesive, oil, asphalt, paint, paraffin wax, oil and various resin raw materials in the drum. It can make viscosity of materials descending and uniform by heating the drum, and reduce the power of pump. Therefore, the heater does not be restricted by seasons, and can be used throughout the year.
Silicone Heating Plates beneficial to take out liquid and coagulum from drums easily by heating, such as adhesive, oil, asphalt, paint, paraffin wax, oil and various resin raw materials in the drum. It can make viscosity of materials descending and uniform by heating the drum, and reduce the power of pump. Therefore, the heater does not be restricted by seasons, and can be used throughout the year.
Silicone Heating Plates beneficial to take out liquid and coagulum from drums easily by heating, such as adhesive, oil, asphalt, paint, paraffin wax, oil and various resin raw materials in the drum. It can make viscosity of materials descending and uniform by heating the drum, and reduce the power of pump. Therefore, the heater does not be restricted by seasons, and can be used throughout the year.
The heating element is a Nickel-Chromium or Copper-Nickel alloy wire, this resistance is embedded between two layers of silicone impregnated glass cloth, making drum heater. A fitted stainless steel spring makes the mounting easy.
A dial thermostat graduated from 30 C to 150 C allows the temperature maintenance adjustment. Or digital thermostat 0--280 degree C can adjust and display temperature as your need.The drum heater is weatherproof.
FSF panel radiators are ceramic infrared radiators with a low overall height. They are produced using a full-pour casting ceramic process and are designed for operating temperatures up to 720C and surface ratings up to 64 kW/m.
Compared to other LaiYuan panel radiators, which have the standard socket, the overall height of the FSF radiators, measured from the radiation surface up to the mounting plate, has been reduced by approximately 45 %.
FSF series radiators can be used universally. The low overall height of the radiators enables space-saving installation, for example, which may be required to retrofit machines.
FSF radiators are available in four designs and cover the power range from 60 W to 1500 W. They have the customary market dimensions and can there- fore be replaced with radiators with corresponding properties if the requirements change.
Tubular heaters are used for almost every kind of heating appliances. They are easy to form and feature highest mechanic stability and electric properties at the same time.
Industry use
Finned Tubular elements
Animal Incubators for Prenatal Care
Ducts
Epoxy Curing
Food Service Equipment
Furnaces
Fusing Laminated Sheets Together
Hopper and Silo Heaters - Plastic
Food Agriculture
Kettles and Tanks
Ovens - Process, Curing, Food
Paint and Enamel Baking Equipment
Plastic Sheet Bending Equipment
Spas and Hot Tubs
Steam Tables
Sterilizers and Autoclaves
Stretch Wrapping Equipment
Ovens
Textile and Chemical Dryers
Welding Preheat Equipment
Air Heating-Free Air Heating
Contact Heating
Radiant Heating
Liquid Heating (Direct Immersion)
Oil Heating
Air & Gas Heating
Dryers
Tubular heaters are used for almost every kind of heating appliances. They are easy to form and feature highest mechanic stability and electric properties at the same time.
Flexible tubular heaters have developed to be a new industry standard for the use in heating platens, welding bars and manifolds.
Screw in tubular heaters are standardised for use in liquids like water.
Finned tubular heaters are especially for air-heating-cabinets or tunnels.
Important and useful characteristics of tubular heaters are that they can be formed into virtually any shape, brazed or welded to any metal surface, and cast into metals.
Stainless steel tubular heater is cylindrical electrical heating elements with two head. Protected with a stainless steel sheath. Mostly double head heater is used for heating up solids such as injection presses heating plates or various tools, double head heater can also be used for heating up water of gases under certain conditions.The choice of technology will depend on technical specifications required and the application.When you don't know exactly which product you are looking for, we will recommend you the best solution for your needs.Tubular heaters are custom designed in a various shapes to as clientâ??s requirements for direct immersion in liquids such as water, oils, solvents and process solutions, molten materials as well as air and gases.
The tubular electrothermal element (electrothermal tube) is made of magnesium oxide sand with good heat resistance, thermal conductivity and insulation by filling and compacting the holes of spiral electrothermal alloy wires (nickel-chromium and ferrochromium alloy) along the central axis of the tube with metal tubes as the shell (including stainless steel and copper tubes). The ends of the tube are sealed with silica gel and processed by other processes.
Flange immersion heater is made of seamless stainless steel tube, high-quality Mgo, High Ohm NiGr alloy wire. Flange immersion heater is more heat exchange efficient, that means flange immersion heater could standard 3 to 4 times wattage. Flange immersion heater is made of advanced production equipment and through strict quality test. Characteristic fast temperature rise heating uniformity heating exchange efficiently long-time usage appliance.
Flange immersion heater is made of seamless stainless steel tube, high-quality Mgo, High Ohm NiGr alloy wire. Flange immersion heater is more heat exchange efficient, that means flange immersion heater could standard 3 to 4 times wattage. Flange immersion heater is made of advanced production equipment and through strict quality test. Characteristic fast temperature rise heating uniformity heating exchange efficiently long-time usage appliance.
Stainless steel tubular heater is cylindrical electrical heating elements with two head. Protected with a stainless steel sheath. Mostly double head heater is used for heating up solids such as injection presses heating plates or various tools, double head heater can also be used for heating up water of gases under certain conditions.The choice of technology will depend on technical specifications required and the application.When you don't know exactly which product you are looking for, we will recommend you the best solution for your needs.Tubular heaters are custom designed in a various shapes to as clientâ??s requirements for direct immersion in liquids such as water, oils, solvents and process solutions, molten materials as well as air and gases.
All products are using SUS304 or SUS321 seamless stainless steel pipe, MOG holder and MGO head with high temperature 1800C,99% MGO rod,overseas high temperature MGO powder, Cr20Ni80 resistance wire ,Ni-Mn lead wire and Silicone Rubber wire .It suits for mold heating . Large-scele production with competitive price,Good-look appearance of the product and excellent quality .
Diameter
3.0mm to 85mm
Diameter tolerance
0mm~0.08mm
Length tolerance
�±1mm
Cold zone
5~15mm from lead wire; 3~10mm at the bottom
Max surface loading
40w/cm^2
Voltage
1.5V~440V
Insulation resistance
500ohm
Temperature tolerance
�±3C
Shape
Straight/ L/ Square/ Split type/ Special-shaped
Material of lead wire
Silicone rubber; PTFE; High Temperature Fiberglass; Metal hose protection; Metal braided
Thermocouple wire
K type,J type,E type ,PT100
Method of lead wire
Internal wire(Swaged) and External wire (Cripmed)
