It is used as heat insulating materials and an execllent substitute for asbestos cloth. Ceramic fiber cloth with metallic (nickel wire or stainless wire) are also available.
Spec:Thickness:0.8mm~6.0mm
Width:1000mm
Refractoriness:800~1200
It is woven by best quality texturized glass fiber yarn , it was the high quality, warm keeping thermal insulator, it is the ideal substitute of the asbestos cloth.
The texturized glass fiber cloth can be offered to insert the copper wire (or nickel wire , stainless steel wire ) .
The surface of the texturized glass fiber cloth with rubber can be offered.
Spec:Thickness: 0.2mm~6.0mm
Width: 1000mm
Refractoriness: 450 550
It is woven by best quality texturized fiberglass yarn, treated with heatment ,has slippy surface, no damage to shin. It is idea thermal insulation material substitue for asbestos cloth.
HT800(Golden)
1
Structure
Satin
2
Model of raw yarn (tex)
Warp
weft
ET9 33 4X2
ET9 33 4X2
ETG 150 4/2
ETG 150 4/2
3
Width
101.6±2cm
40±0.75 inch
4
Thickness
0.8±0.08mm
0.03±0.003 inch
5
Type of covering
Heat treatment
6
Thickness of covering
7
Weight
880±88g/m2
26 OZ/YD2
8
Density
Warp
Weft
18±1.8 per cm
13±1.3 per cm
47.5±4.5 per inch
33±3.3per inch
9
Tensile strength (min)
Warp
Weft
8000N/5cm
6000N/5cm
888 Ibs/inch
666 Ibs/inch
10
Oil content
This is a packing made by asbestos yarns, treated with lubricant and graphite. Used in pump, valve, etc. the working medium are steam ,air industrial water,peturm oil.The packing with METALLIC (copper wire, inconel wire or stainless wire) are also available.
Spec:3.0mm - 50mm
It is a braided packing made of PTFE yarn containing graphite particles and anti-corrosive lubricant. It is recommended for shafts for almost all chemicals. Stability and long service lift are achieved by low friction coefficient. It has great tear strength and high thermal conductivity. This self-lubricating packing does not score the shaft and minimizes sleeve replacement cost. It can be used to seal alkalis, solvents, water, steam, acids except strong oxidizing acids(aqua regia, fuming nitric acid, fuming sulfuric acid, etc.) forcentrifugal pumps, autoclaves agitators, mixers, etc.
Spec: 3.0mm - 50mm
It is flexible braided packing which is made of an innovative expanded pure graphite yarn. It can be used to seal hot water, high temperature and pressure steam, leat transfer fluid, hydrogen gas, ammonia, organic solvents, hydrocarbons, cryogenic liquids, etc., except fewer strong oxidizer .They can be applied to the equipments and devices in peroleum,electricity generation ,chemical ,pharmaceutical and light industries.
Spec:3mm - 50mm
High quality cotton threads are made into square or lattice braids and treated with chemically stable grease, it is especially suitable for brass-made tem tube.
Spec: 3.0mm - 50mm
Braided asbestos yarns impregnated with PTFE dispersion,treated with pure minenal oil . It is a flexible, resilient, homogeneous and compact packing . can be utilized on stainless steel or chromed shafts in the presence of high peripheral speeds without etching them. Its suitable for alkalis, thinned inorganic acids, water, steam, organic gases, solutions of every kind. It can be utilized in paper mills, dyeing plant, foodstuff, pharmaceutical and oenologic industries.
Spec:3.0mm - 50mm
It is a braided packing made of pure PTFE thin yarns fiber, almost complete chemical inertia, dimensional stability, low friction coefficient to compression, and excellent. Resistance to compression are qualities classifying this packing among the best ones available in the industrial field. It is suitable for all the chemical compounds (excepting cast alkaline metals and the gaseous fluorine), alternative and rotary motions shafts operating at low peripheral speed, rods, pistons valve stems, expansion joints, etc.
The packing impregnated with PTFE are also available .
Spec: 3.0mm - 50mm
It is moulded with PTFE and has good chemical resistance and high electrical property. Widely used as insulating parts and sealing in chemical, electrical, etc.
Diameter: 4mm~200mm
Density: 2.1 2.3g/cm3
Tensile strength: 15Mpa
Ultimate elongation: 150%
Dielectric strength 10KV/MM
Interwoven from asbestos warp and weft yarns, suitable for lagging for boilers and pipe lines ,used as thermal insulating materials for factories ,building ,power stations and steamers .Also ideal for making protective gloves ,working clothes and gasket materials at temperatures up to 550.Loss on ignition 32% max.
Asbestos cloth with metallic (copper wire ,inconel wire or stainless wire) are also available.
Refractoriness:250-550 Refractoriness of dust free asbestos cloth :480-550
Spec:Thickness:1.0 mm-4.0mm
Width:1000-1500mm