The Mezzanine Flooring System by HLD racking offers a high strength, light weight flooring system which is assembled onsite without the need for welding. In fact it only requires basic tools to assemble. The system also allows for the height of the columns to be adjusted, therefore compensating for any variations in the slab. Once installed, the structural floor provides a strong foundation for storage both beneath and above. Mezzanine floors are available in a multitude of options, this system can be configured to suit just about any application. Racking Floors are a flexible option consisting of uprights, beams, shelves, decks, handrails and stairs. Additional storage floors can be incorporated into the pallet racking with walkways to allow pedestrian access for order picking. It is the ideal solution for utilising a warehouses height and space. It can also accommodate sophisticated automated picking systems. Mezzanine floors are used across all industries.
Racking for Automotive Fittings could be the first with shelves and second platform, or both with shelves. The shelves in first layer not only for storing goods, but also for supporting the second layer. Can be design many layers(usually 2-3 layers), and with staircases handrails, elevator and lighting systems. If the bottom beam distance can make short, the whole system cost can low down a lot too.
Cut-in composite frame and beam structure, simple assembly
and dis assembly , panel can be adjusted freely every 50mm, load capacity
for each level can 200-1000kg . The rack?s span can meet 2400mm, panel
can be use steel, wood(plywood, middle density fiber board,solid board)
and wire mesh board etc, use to storage small goods by man.
Gravity racking is derive from pallet racking, using the roller track or pallet with bottom-wheel,have the track's gradient(approx 3 degree) use the goods weight, realize the cargo FIFO(first-in- first-out) principle, suitable for large quantities and the same type of goods storage operation, make use of high space. Especially for storage have warranty period and not long term backing of goods.
This racking style is designed for use with items of varying lengths, shapes and sizes. When your products cant be stored on standard pallets, a cantilever rack allows you to carry a wide range of stock without needing multiple racking systems to accommodate them. Cantilever systems can reach great heights, giving you high storage density per metre on the ground and making the best use of available space.
Longspan Steel shelving-It's simply the best looking shelving system in the market. With only three components including frames, beams and decking, installation is a simple process with many buyers choosing to assemble Longspan themselves. Longspan is fully powdercoated for a tough durable finish and can be adjusted to suit any area, gaining much additional storage space as possible. Depending on the configuration, shelves can take up to 1400kg (UDL). Our Standard frame heights available at 2000mm, and special sizes also available on request, Longspan has the adaptability to suit any situation.
Radio shuttle is a racking system relies on electric Pallet
Runners automatically high density pallet storage on racking
rails it has three major parts rack, Pallet Runners and Forklift.
Radio shuttle rack is suitable for those big quantities but small
variety goods like foods, beverage, chemical and tobacco industry
especially popular in refrigeration storage house. Compared
with Drive -In Rack the radio shuttle has greatly make full use of
warehouse space, improved the work efficiency, can store high
density products and besides no need forklift entry whist store
and pick up goods.
By using composite racking and roller fluency rail system,
impose the goodss self weight to achieve goods first in and first out principle.
It is suitable for place of assembly line,logistic distribution center, convenient storage,
save space and upgrade efficiency.
Features:
1) The cantilever racking is suitable for storing long, circular or
irregular shape articles
2) It's suitable for the storage and reorganization of the tall and slender good
3) There are two structures_single arm and double arms.
4) It fit for small space and low warehouse
5) It is easy to fetch or place goods.
6 Mark: non-standard specification is available.
Narrow Aisle racks provide you with high-density storage up to a height of 13m, where pallets are manoeuvred using turret trucks and automatic stacker cranes. The benefit of this system is that it gives you immediate access to all items while maximising storage capacity with its very limited aisle space.
If youre looking to maximise storage capacity in limited space, then double deep racking could be the solution for you. In this system, pallets are stored two deep at each access point, so front row pallets will need to be moved out of the way in order to access the back row. By reducing your aisle-to-rack ratio, youll gain space and stock rotation will still be possible. To use this system, you'll need a special reach forklift truck.
Use slid structure, suitable use for storage mould and heavy duty goods.With safe credibility convenience operation and storage load capacity.It is easy to store and take 500-2000kg for each drawers goods.With crane for realize easily store and take moulds and heavy duty goods.
Features:
1). Longer length shelving with a heavier weight loading.
2). Up to 1000kg weight loading per level.
3). A choice of 2 heights, 3 depths and 4 lengths to maximize
your storage space.
4). All shelves or beams can be adjusted freely every 50mm.
5). Shelves or panels can be made from Wire Mesh or moisture-resistant
steel board.
6). Consists of upright frames, beams and shelves.
7). Easily assembled in minutes.
8). Powder coated paint finish.
9). Extra shelves easily added.
10). Increase your storage space by adding extension units.
11). Especially suitable for those small in size but large quantity
products like retailing industry.
Features:
1) Pallets can be located, accessed and moved individually.
2) Rapid handling of almost all types of pallet sized goods.
3) Infinitely adjustable and offering a wide range of options and
components to accommodate specialized needs.
4) Maximizes space use in any warehouse configuration
while retaining optimum product accessibility.
5) Strength and rigidity prevents compression damage to goods.
6) Bottom level of pallets can be stored on the floor, lowering
structure costs.
Features:
1) High-density storage, high storage utilization
2) High efficiency, greatly reducing the waiting time
3) Job flexibility, the goods can operate FIFO model and LIFO model
4) Safety, reduce shelf impact and improve safety productivity
Used in conjunction with special purpose pallet handling equipment
which may require guidance, by electronic wire or by steel rail.
Pallet support rail is punched and roll formed, so it has the
character of long inertial distance/strong load capacity.
Be used in food industry, chemical industry, clothes industry and freeze warehouse and so on.
Picking direction has single and double rows. Single one (near wall) depth is
not exceed 6 pallet depth.
Double one(middle area can pick goods) depth is better control in 12 pallet depth.
This kind system usually not exceed 10 meter high. To fasten it, not only need the strong
structure, but also need to add fix equipment. Goods is better not too big and too weight,
usually less than1500kg. The width is not excees 1.5 meter. And can work in trucks.
These type of racks use gravity to gently roll cartons or pallets to the pick face of the system, working on a first-in-first-out basis. In live storage areas, forklifts are physically separated from pedestrians to increase worker safety and efficiency. Using this method means stock rotation is automatic, so its great for perishable items.
Also known as drive-through racking, this system is very high density, providing excellent storage capacity. A drive-in rack has no aisles, saving a significant amount of space. Pallets are stored in a continuous block, using a last in first out principle. This system is operated with standard forklifts and is good for non-perishable items and fast-moving stock.
Racking for Automotive Fittings could be the first with shelves and second platform, or both with shelves. The shelves in first layer not only for storing goods, but also for supporting the second layer. Can be design many layers(usually 2-3 layers), and with staircases handrails, elevator and lighting systems. If the bottom beam distance can make short, the whole system cost can low down a lot too.
Pushback racking consists of upright frames, beams, rails, carts and more
Carts are nested on the pre-designed slanting rails and the later in goods will push the first in goods along with racks depth direction
When picking up goods the last in will be taken out firstly and the following goods will automatically slide down by gravity reason so to achieve the FIRST-IN-LAST-OUT (FILO) storage principle
Comparing with drive-in and double-deep rack, push-back rack is more convenient to store pick up goods and utilize high efficiency of space
This type of rack can be stored no more than 5 depths pallets or carts
Steel structure garret is suit for high warehouse, light cargo,
pick by man and large storage quantity situation, which can increase
the using space.
Steel structure garret systems are widely acceptable to automobile
and logistics industry. Its bottom level can be shelf form and above flat
form or both shelf form.
FIFO
Large storage quantity for high efficiency of space utility
Suitable for storing varieties&large amount of cargos
Suitable for cold storage improving the density.
Features:
1) High-density storage, high storage utilization
2) High efficiency, greatly reducing the waiting time
3) Job flexibility, the goods can operate FIFO model and LIFO model
4) Safety, reduce shelf impact and improve safety productivity
Used in conjunction with special purpose pallet handling equipment
which may require guidance, by electronic wire or by steel rail.
Pallet support rail is punched and roll formed, so it has the
character of long inertial distance/strong load capacity.
Be used in food industry, chemical industry, clothes industry and freeze warehouse and so on.
Picking direction has single and double rows. Single one (near wall) depth is
not exceed 6 pallet depth.
Double one(middle area can pick goods) depth is better control in 12 pallet depth.
This kind system usually not exceed 10 meter high. To fasten it, not only need the strong
structure, but also need to add fix equipment. Goods is better not too big and too weight,
usually less than1500kg. The width is not excees 1.5 meter. And can work in trucks.
Cut-in composite frame and beam structure, simple assembly
and dis assembly , panel can be adjusted freely every 50mm, load capacity
for each level can 200-1000kg . The rackâ??s span can meet 2400mm, panel
can be use steel, wood(plywood, middle density fiber board,solid board)
and wire mesh board etc, use to storage small goods by man.
Features:
1) Pallets can be located, accessed and moved individually.
2) Rapid handling of almost all types of pallet sized goods.
3) Infinitely adjustable and offering a wide range of options and
components to accommodate specialized needs.
4) Maximizes space use in any warehouse configuration
while retaining optimum product accessibility.
5) Strength and rigidity prevents compression damage to goods.
6) Bottom level of pallets can be stored on the floor, lowering
structure costs.
Features:
1). Longer length shelving with a heavier weight loading.
2). Up to 1000kg weight loading per level.
3). A choice of 2 heights, 3 depths and 4 lengths to maximize
your storage space.
4). All shelves or beams can be adjusted freely every 50mm.
5). Shelves or panels can be made from Wire Mesh or moisture-resistant
steel board.
6). Consists of upright frames, beams and shelves.
7). Easily assembled in minutes.
8). Powder coated paint finish.
9). Extra shelves easily added.
10). Increase your storage space by adding extension units.
11). Especially suitable for those small in size but large quantity
products like retailing industry.
Gravity racking is derive from pallet racking, using the roller track or pallet with bottom-wheel,have the track's gradient(approx 3 degree) use the goods weight, realize the cargo FIFO(first-in- first-out) principle, suitable for large quantities and the same type of goods storage operation, make use of high space. Especially for storage have warranty period and not long term backing of goods.
Apply to storage large capacity and high frequency of files information management, use of activity route to save space, according to the type that they are divided into mechanical type and hand-push type.
Metal wire cage as a framework of steel profiles, metal wire as the main materials, goods in storage for a variety of characteristics design, a variety of styles and use purpose, with heavy duty load capacity, large capacity, it can be stacking, folding, you can use the forklift transport,complete specifications,wide range of uses, can be arbitrary models and non-standard specifications order.
1). Solid structural design and special finish can meet the factory
complex work environment
2). Free adjustment of the clapboard drawer, you can compart storage space
3). Wide aluminum alloy drawer hands and changed label, beautiful appearance,
convenience and practical.
4). Advanced security bottom of drawer design to ensure that
do not slide out accidentally when closes drawer
5). Safety baffle design to ensure the drawer will not fall when fully open.
Locksmith used with the international advanced level.
Only a key can lock all the drawers to ensure product safety.
6). Be free to choose the different height drawers. That can fully
meet user requirements
7). Various color, overall layout meet user requirements.
8). Mark: Non-standard specification is available.
Racking for Automotive Fittings could be the first with shelves and second platform, or both with shelves. The shelves in first layer not only for storing goods, but also for supporting the second layer. Can be design many layers(usually 2-3 layers), and with staircases handrails, elevator and lighting systems. If the bottom beam distance can make short, the whole system cost can low down a lot too.
Features:
1) The cantilever racking is suitable for storing long, circular or
irregular shape articles
2) It's suitable for the storage and reorganization of the tall and slender good
3) There are two structures_single arm and double arms.
4) It fit for small space and low warehouse
5) It is easy to fetch or place goods.
6 Mark: non-standard specification is available.
Features:
1) Pallets can be located, accessed and moved individually.
2) Rapid handling of almost all types of pallet sized goods.
3) Infinitely adjustable and offering a wide range of options and
components to accommodate specialized needs.
4) Maximizes space use in any warehouse configuration
while retaining optimum product accessibility.
5) Strength and rigidity prevents compression damage to goods.
6) Bottom level of pallets can be stored on the floor, lowering
structure costs.
