Thread Size D, S.W.L.@ 0 () Kg., A, mm, B, mm, E, mm, F, mm, G, mm, H, mm, J, mm, Coarse, Pitch,
M8, 160, 6, 20, 20, 6.3, 20, 15, 1, 1.25, M10, 250, 7.7, 24, 24, 8, 25, 17, 1, 1.5, M12, 400, 9.4, 28, 28, 9.5, 30, 20, 1, 1.75, M16, 630, 13, 34, 34, 12.5, 36, 24, 1, 2.0, M20, 1000, 16.4, 40, 40, 16, 45, 27, 1, 2.5, M24, 1600, 19.6, 48, 48, 19, 53, 31, 2, 3.0, M30, 2500, 25, 56, 56, 24, 64, 39, 2, 3.5, M36, 4000, 30.3, 67, 67 x, 28, 75, 48, 3, 4.0, M42, 6300, 35.6, 80, 80, 34, 90, 56, 3, 4.5, M48, 8000, 41, 95, 95, 38, 100, 65, 3, 5.0, M56, 10000, 48.3, 112, 112, 45, 119, 73, 4, 5.5, M64, 16000, 55.7, 125, 125, 50, 135, 85, 4, 6.0, M72, 20000, 63.7, 140, 140, 58, 153, 95, 4, 6.0, M80, 25000, 71.7, 160, 160, 63, 165, 110, 4, 6.0, M90, 32000, 81.7, 180, 180, 71, 180, 125, 5, 6.0, M100, 40000, 91.7, 200, 200, 80, 195, 140, 5, 6.0
W.L. at 0o kg, Size Dia. A, Coarse Pitch, B, D, E, F, G, H, M, Approx, Wt. each kg.,
85, 8, 1.25, 20, 6, 20, 8, 18, 12, 10, 0.06, 150, 10, 1.50, 25, 8, 25, 10, 22, 18, 12, 0.11, 220, 12, 1.75, 30, 10, 30, 12, 26, 22, 14, 0.18, 380, 16, 2.00, 35, 12, 35, 14, 30, 28, 16, 0.28, 570, 20, 2.50, 40, 14, 40, 16, 35, 30, 19, 0.44, 810, 22, 2.50, 45, 16, 45, 18, 40, 35, 21, 0.55, 1050, 24, 3.00, 50, 18, 50, 20, 45, 38, 24, 0.74, 1700, 30, 3.50, 65, 22, 60, 24, 55, 45, 28, 1.66, 2500, 36, 4.00, 75, 26, 70, 28, 65, 55, 32, 2.7, 3400, 42, 4.50, 85, 30, 80, 32, 75, 65, 38, 4.0, 5200, 48, 5.00, 100, 35, 90, 38, 85, 70, 46, 6.4, 6500, 56, 5.50, 110, 38, 100, 42, 95, 80, 50, 8.8, 8700, 64, -, 120, 42, 110, 48, 105, 90, 58, -, 13000, 72, -, 150, 50, 140, 60, 130, 105, 72, -, 17000, 80, -, 170, 55, 160, 68, 150, 120, 80, -, 20000, 100, -, 190, 60, 180, 75, 165, 130, 88, -
All dimensions in mm
Proof Load = 2 x S.W.L. (Safe Working Load)
Other threads can also be supplied to special order.
Shoulder Nut Eye Bolt - Installation for Angular loading
The threaded shank must protrude through the load sufficiently to allow full engagement of the nut.
If the eye bolt protrudes so far through the load that the nut cannot be tightened securely against the load, use properly sized washers to take up the extra space
Between The Nut And The Load
Place washers or spacers between nut and load so that when the nut is tightened securely, the shoulder is secured flush against the load surface.
Forged Eye Bolt Warning & Applications
Important Safety Information - Read & Follow
Inspection / Maintenance Safety
Never use eye bolt that shows signs of wear or damage
Never use eye bolt if eye or shank is bent or elongated.
Always be sure threads on shank and receiving holes are clean
Never machine, grind, or cut eye bolt.
Assembly Safety
Never exceed load limits specified in Table I
Never use regular nut eye bolts for angular lifts.
Always use shoulder nut eye bolts (or machinery eye bolts) for angular lifts.
For angular lifts, adjust working load as follows:
Never undercut an eye bolt to seat shoulder against the load.
Always countersink receiving hole or use washers to seat shoulder.
Always screw eye bolt down completely for proper seating.
Always tighten nuts securely against the load.
Shoulder Nut Eye Bolt - Installation for Angular loading
Operating Safety
Always stand clear of load
Never lift load with steady, even pull - do not jerk.
Always apply load to eye bolt in the plane of the eye, not at an angle
Never exceed the capacity of the eye bolt.
When using lifting slings of two or more legs, make sure the loads in the legs are calculated using the angle from the vertical to the leg and properly size the shoulder nut or machinery eye bolt for the angular load.
Capacity IN Tones
Jaw Openng A
Plate ADMIT C
Body DIA B
CAM DIA
Ring Size
d X D
Weight Per Pair Kgs
Pair Each
1
0.5
50
150
40
16
16 X 75
12
2
1
60
170
45
16
20 X 85
13.5
3
1.5
70
200
55
20
22 X 95
28.5
5
2.5
85
260
65
25
25 X 95
40
10
5
95
300
90
32
32 X 135
78
20
10
150
400
120
40
45 X 200
160
SL- 450
Front and Side View
Sealinkers Clamps
Each clamps has a product Identification Code for Material traceability, the name Sealinkers or SL, and a size forged into it.
Entire Clamps are galvanized / Powder Coated to resist corrosive and rusting action.
Only Genuine SL Clamps have a Yellow colour for instant recognition.
All Clamps have rolled threads and extra heavy nuts.
Rope Size
Dimensions
(mm)
Min No.
of
Clamps
Amt. of
Rope to
Turn Back
in (cm)P
(in.)
(mm)
A
B
C
D
E
F
G
H
3/8
9-10
11.2
38.1
19.1
25.4
23.1
19.2
41.4
49.3
2
16.5
1/2
13
12.7
47.8
25.4
30.2
28.7
22.4
48.5
58.0
3
29.2
5/8
16
14.2
60.5
31.8
33.3
34.0
23.9
52.5
63.5
3
30.5
5/4
18-20
15.8
70.0
36.6
38.1
35.8
26.9
57.0
72.0
4
46
7/8
22
19.1
79.5
41.2
44.5
40.4
31.8
62.0
80.5
4
48
1
24-26
19.1
89.0
46.0
47.8
45.2
31.8
67.0
88.0
5
66
1 1/8
28-30
19.1
98.5
51.0
51.0
48.5
31.8
71.5
91.0
6
86
1 1/4
32-34
22.4
108
45.0
58.5
55.5
36.6
79.5
105
7
112
1 3/8
36
22.4
118
58.5
60.5
58.5
36.6
79.5
106
7
112
1 1/2
38-40
22.4
125
60.5
65.5
62.0
36.6
86.5
113
8
137
1 3/4
44-46
28.7
146
70.0
77.5
74.5
46.0
97.0
134
8
155
2
48-52
31.8
164
76.0
86.0
83.5
51.0
113
149
8
180
Note
Refer to table I in following these instructions. Turn back specified amount of rope from thimble or loop. Apply first clip one base width from dead end of rope. Apply U-Bolt over dead end of wire rope - live end rests in saddle (Never Saddle a dead horse!).Tighten nuts evenly, alternate from one nut to the other until reaching the recommended torque.
DSQ Vertical Plate Lifting clamps are used for lifting and
turning over plates from horizontal to vertical positions.
DSQ Vertical Plate Lifting clamps are made with hardened
steel jaws for firm grip and proper locking.
DSQ Vertical Plate Lifting clamps in a small easy to handle tool, incorporated with a spring lock which facilitates attaching of the clamps to the plates.
Model
WILL
Opening (mm)
Weight (Kg)
DSQ1
1
50
3.7
DSQ2
2
55
6.3
DSQ3
3
70
10.5
DSQ5
5
90
19.3
DSQ8
8
130
40
DSQ12
12
150
52
DSQ16
16
160
55
Warning
Do not exceed Working Load Limits.
Avoid Superficial Gripping.
Do not exceed specified angle of Lift (Not more than 60).
Check the cams periodically for excessive wear and tear and reject if found unsafe.
Model SL - PLC
Model : SL - PLC
CAPACITY
Shackle Size
Plate Size
EACH
PAIR
1.5
3
16 X 19
16
2.5
5
16 X 19
25
4
8
19 X 22
28
5
10
19 X 22
32
7.5
15
25 X 28
35
10
20
25 X 28
45
I - Beam Clamps (Model: SL - IBC)
Capacity
Flange Width
1
3" - 7"
2
3" - 7"
3
3" - 12"
5
4" - 13"
10
4" - 13"
15
5" - 16"
20
5" - 16"
Spare Parts for IPTK
Safety Lifting Clamps:
Order No.
1. Body Complete
1041
2. Hoisting Eye Complete
1235
26. Hingeshaft Complete
0232
36. Screwed Spindle Complete
1362
Important Features
Lower construction height due to integrated traverse.
Reduced Stress on I - Beam flange due to specially designed clamp jaws.
Adjustable for a wide range of I - Beam widths & Profiles (INP, IPE & IPB)
Strong Industrial Design
Clamp corresponds to standard specification for vertical load pick-up.
Each quipment is serially numbered, tested by a competent authority 50% overload & is given Test Certificate.
Optional feature
special ofshore version model IPTKO (including 3.lB certificate)
Bull Dog Grips (ISS)
IS: 2361 / 1970
Drop Forged Steel Wire Rope Bull Dog Grips
Note : For intermediate sizes of wire ropes, the next larger size of bull dog grip shall be used.
Geared Monorail Travelling Trolley
Travelling Troley
Side View
Front View
Dimensions, Weight and Performance Data
Push
500
Push/Geared
Geared
Geared
Capacity
kg
1000
3000
5000
10,000
Inside of wheel flanges mm
Range 1
50-130
58-150
90-160
110-150
140-170
Range 2
140-200
150-210
160-220
160-210
180-210
Range 3
210-305
210-305
220-305
215-265
215-245
A Seat of susp, plate to runner tread
Range 1 & 2 mm
75
89
110
84
137
Nominal 1.5 mm clearance to be allowed from edge of track flange to inside of wheel flange (3 mm overall on both side)
Overall width of geared travel trolleys - J + (1/2 x track width) + G. On 500 to 2500 Kg. units when using the narrower track widths the cross bolt adjusting washers are to be assembled such that the end of the cross bolt is clear of the hand chain wheel.
Weight of trolleys only exclude hand chain. Hand chain is 0.45Kg/m per linear length up to and including 2t capacity.
Bottom of hand chain loop is 460 mm from ground level.
Pusher bar fixing holes provided in all models.
Anti-tip stop fitted to all hand geared versions.
Buffers available as on option.
Specification
Model
HSH 3/4
HSH 1-1/2
HSH 3
HSH 6
Capacity
ton
0.75
1.5
3
6
Lift
m
1.5
1.5
1.5
1.5
Test load
ton
1.125
2.25
4.5
7.5
Min. distance between hooks:
mm
303
365
485
600
Pull on lever to lift full load
kgf
20
21
33
35
No. of load chain falls
mm
1
1
1
2
Diameter of load chain
mm
6
7
10
10
Length of lever handle : D
mm
290
410
410
410
Dimensions mm
A
139
174
200
200
B
84
108
115
115
C
153
160
185
230
Net weight
kg
7
11
20
30
Multipurpose, Portable, Universal, Gearless, Hand operated Pulling and Lifting machine, Supplied complete with telescopic, operating handle and standard Length of super flex steel fibre-mixed core wire-rope fitted with Hook or Shackle at one end and fused and tapered at the other end.
Pulling & Lifting Machines Hy-Tack XL Series 2005
Technical Specifications
HT-7
HT-13
HT-20
HT-35
HT-58
Dimensions (Approx.)
515 x 265 x 110
600 x 360 x 155
620 x 360 x 155
720 x 400 x 160
810 x 465 x 190
Capacity (SWL) (kgs) Lifting, Pulling
750, 1250
1600, 2600
2000, 3000
3200, 5200
5000, 8000
Length of Telescopic operating handle (Approx.)
54/72 cm
66/104 cm
70/130 cm
79/118 cm
120/145 cm
Effort at full load (Approx.) kgs
40
50
50
60
70
Rope travel per Return stroke (Approx.) mm
40
55
50
36
30
Diameter of wire Rope (mm)
8.0
11.3
12.0
16.3
20.0
Standard Length with Each machine (meters)
10
20
20
10
10
breaking Load of wire rope (Approx.)
4.5 Tons
9.0 Tons
10.0 Tons
18.0 Tons
24.0 Tons
Exclusive Features
Casing:
Made from CRC sheet (Galvanized) or Graded Aluminium for
light weight a high factor of safety.
Jaw:
Made from Special Alloy Steel, Accurately Machined, so as
to avoid slippage of wire rope.
Jaw Limits:
Are made from special steel & heat treated for greater strength.
Hooks / D-shackles:
Fitted with Alloy steel Forged Hooks or D-shackle to make
it feasible to be able to fit it at any place.
Wore Ropes:
Super flex Steel Fiber -mixed are, manufactured as IS. 226.
Accepted & Widely used by
Railways
Mines and Quarries
Navigator
Electricity Board’s
Dockyards
Road Transports
Heavy Industries etc.
Increase of Pulling and Lifting Power:
Lifting - machine anchored above load
Chain Electrical Hoist
Manufactured in ISO 9001:2000 Certified Company Assured quality and Interchangeability of parts
Truely Modular Construction Easily accessible separate brake, motor, drum, gear box & panel unit.
Seamless Pipe Accurately Machined rope drum. Long Life.
Unique and sturdy rope guide Arrangement Prevents rope slackening and easy change of rope.
Precision Machine Cut case-Hardened Alloy steal gears. Noiseless Operation Long life
Fail safe Disc Brake Trouble free operation and ease of adjustment
Built in Control Panel with Std. Electricals Ready to use
Specification
Method of use
Rated volt(V)
Input(w)
Rated lifting weight(kg)
Lifling speed (m/min)
Lifting height (m)
Quon/CTN (Pcs)
Pocking dim-ension(cm)
G,W,/N,W, (kg)
HGS-B100-12 PA2OO
Single-hook
220/230
450
100
10
12
2
46X36X16
24/22
Double-hook
200
5
6
HGS-B125-12 PA25O
Single-hook
220/230
500
125
10
12
2
46X36X16
25/23
Double-hook
250
5
6
HGS-B150-12 PA3OO
Single-hook
220/230
550
150
10
12
2
46X.36X16
26/24
Double-hook
300
5
6
HGS-8200-12PA4OO
Single-hook
220/230
750
200
10
12
2
52X41X17
35/32
Double-hook
400
5
6
Single-hook
220/230
900
250
10
12
2
52X41X17
36/33
Double-hook
500
5
6
Single-hook
220/230
1050
300
10
12
2
52X41X17
37/34
Dimensions, Weight and Performance Data
Marzoli Peg
High quality spare parts for Marzoli machines manufacture, importers and suppliers in India.
We use the most advanced technology and graded raw materials to manufacture the Textile Machinery Marzoli Spare Parts like Marzoli Rings, Peg etc.
We have been regularly supplying this "Marzoli Spare Parts" to many contractors and associated people in this Field across India.
We would request to you to please send to us your enquiries for the same so that we can send to you more details and our commercial offer for the same.
Marzoli Rings
Dimensions, Weight and Performance Data
Machine Width With Doffer Max. 1420 mm
Ring Diameter 36 - 54 mm
Application Staple fibres up to 60 mm
Tube Length 180 - 260 mm
Spindle Gauge 70 - 75 mm
Twist Range 4,0 - 80 Tpi (160 - 3150 Tpm)
Material Cotton, man made fibres and blends
Yarn Count 3,0 - 150 Ne (Nm 5,0 - 250).
Ring Diameter 36 - 54 mm
Tube Length 180 - 260 mm
Spindle Gauge 70 - 75 mm
Maximum yarn quality in all working conditions
High drafts up to 80 fold.
Optimum spindle speed at every phase of bobbin build up thanks to an inverter drive.
Independent spindles, ring rail and drafting system drives.
Extremely reliable and fast doffing system with no trailing ends.
Simple and reliable transport peg system for either bobbins or tubes.
Ring frame stops to prevent production of defective yarn.
Flexible linking alternatives.
Bind the rope from the end at a distance equal to the loop desired, plus an additional length of about 10 times the diameter of the rope .split the rope by separating three adjacent strands, leaving the other three strands and core intact. Bend the large section(three strands core ) into the desired size loop and start laying the three separated strands in to the grooves of the bent section,as close to the throat as possible.
Completely lay the three strands around the loop as deep into the throat as possible. allowing the six strands ends and the core to project close to the throat of the loop.
In application of pressed-on ferrule is rolled in eye splice. Noticed how smooth the fabric is joined.
Position the special ferrule over the rolled in splice in preparation for swaging. Ends are still flats.
By administration of tremendous force by swaging machine, ferrule is tapered.
Wire Rope Press Grip Sling Are
Economical Safer And Easier To Work With
Three slings you can count on high strength efficiency on all eye splices.they are tapered and completely sealed with at both end to avoid snagging on loads. these ferrules completely cover all strands and locks them securely into place. there are no opening or rough projection to catch on hands. Rope slings with special pressed on metal ferrules are easier to work with.
Slings are made from 6x19 wire rope and from 6x37 wire rope. We recommended use of 6x19 construction. Upto 1 ¼ :6x37or large slings.
Note:
Standred sleeves are recommended for use with 6x19 or 6x37,IPS or EIF RRL,FC or IWRC wire rope.
Double Part Thimble Eye
Double Part Basket
Grommet Round
Application for Grommat
Grommat slings can be fabricated in very short circumstances. The reason is this: Grommat slings are made from one continuous length of strand or wire rope. This requires only one tuck-in point as compared with six tuck-in points needed manufacturer an endless sling.
A Grommat consists of an endless rope having construction 6/1 construction & is used where high ultimate breaking strength of the rope is required beyond the limits of a single part rope.
A strand of sufficient length to complete the Grommat shall be obtained by either of the following methods:
Method A: An order strand shall be unlaid from a specimen of 6/1 rope conforming to the requirement of the customer.
Method B: Unlaying from a specimen of 6/4 rope having strands in all respects equipment to those obtained by method A above.
Method C: Using a virgin strand either prefromed or post formed & in all other respects equivalent to those obtained by method A & B.
During the course of construction of a Grommat the performed lay of the strand shall be maintained and shall not be interfered with except when laying in the core for which purpose length of strand left to form the core should be straightened .
The length of the strand required to form a Grommat shall be equal to about 7.5 times the parameter of the Grommat in case of spliced Grommat. But in case of complete streamline splicing length shall be 4 times the effective length.
Butt Splice
The two ends of the rope should be joined together by two five –tuck splices.
Number of Tucks
The splices shall be tucked three times the full size of strand, a fourth time with the strand each reduced to half the original number and a fifth with the strands each further reduced to one third the original number. The heart strand is to be rowed in during tucking so that a double heart is produced for at least the length of the first three tucks in both directions.
Method of Tucking
The Tucks of the Splice shall be made over one strand and under one strand against the lay of the rope. The heart strand of the rope shall not be removed when the strands are opened out for tucking, but may be cut to a suitable length.
Finishing
The ends of the splice in way of the twisted off ends of wire that is between the end and the third tuck shall be tightly served with seizing wire, after parcelling with canvas, Hessian or wax paper.
Two leg wire rope sling with main ring at top and hooks at the bottom.
Three leg wire rope sling with main ring at top and thimble at the bottom.
Four leg wire rope sling with main ring and intermediate ring at top with bow shackle at bottom.
Four leg sling with main ring with thimble at top and plain loops at bottom.
Braided / Plaited belt lifting slings - Available in standard lts. of 10m &10 in capacities ranging from 10 to 40 tons with steel core ropes.
Flattening Test - Ferrules shall be pressed, along the major axis until the inner, surfecestmeet.
Multipurpose, Portable, Universal, Gearless, Hand, operated Pulling and Lifting machine, Supplied, complete with telescopic, operating handle and, standard Length of super flex steel fibre-mixed core, wire-rope fitted with Hook or Shackle at one end and, fused and tapered at the other end.
After completion of the test, there shall, be no visible crack on the ferrule.
Type, Normal Size, Length before Pressing Min., Length after pressing Min, Thickness Min T, Suitable for Normal Wire Rope Size, Lower Limit, Upper Limit, (1), (2), (3), (4), (5), (6), (7), Type A , 3, 11, 17, 1.61, 2.00, 3.15, 4.0, 10, 22, 1.7, 4.40, 4.75, 6, 10, 23, 2.1, 5.85, 6.30, 8, 27, 34, 3.0, 7.85, 8.40, 9, 30, 33, 3.50, 8.80, 9.45, 10, 32, 35, 3.75, 9.80, 10.50, 11, 36, 43, 5.25, 10.75, 11.55, Type B, 10, 45, 53, 4.2, 11.75, 12.65, 15, 46, 50, 3.8, 13.76, 15.75, 17, 50, 60, 5.2, 15.76, 17.85, 19, 56, 62, 5.00, 17.86, 19.99, 21, 62, 70, 6.20, 20.00, 21.99, 23, 78, 86, 7.55, 22.00, 23.89, 25, 83, 94, 8.00, 24.00, 25.99, 27, 92, 108, 8.85, 26.00, 27.99, 29, 98, 114, 9.85, 28.00, 29.00, 31, 101, 115, 10.00, 30.00, 31.99, 33, 105, 118, 11.07, 32.00, 33.99
Nominal size of rope
A, C, D, F, G, K, R1, R
(1), (2), (3), (4), (5), (6), (7), (8), (9), 08, 33, 11, 46, 9, 4, 3.5, 25, 12, 10, 44, 15, 56, 11, 6, 5.5, 32, 16, 12, 60, 20, 82, 13, 8, 7.5, 44, 22, 14, 60, 21, 82, 15, 8, 7.5, 44, 22, 16, 70, 23, 94, 17, 10, 29.5, 50, 25, 18, 80, 26, 104, 19, 12, 11.0, 56, 28, 20, 88, 28, 116, 21, 12, 11.0, 64, 32, 22, 100, 30, 125, 24, 14, 13.0, 72, 34, 24, 104, 33, 140, 26, 14, 13.0, 76, 38, 25, 114, 36, 150, 27, 16, 14.5, 82, 42, 29, 124, 39, 165, 31, 18, 16.5, 88, 44, 32, 140, 45, 190, 34, 20, 18.5, 100, 50, 35, 154, 50, 208, 38, 20, 18.5, 114, 56, 38, 169, 56, 234, 41, 22, 20.5, 125, 64, 41, 169, 56, 234, 44, 22, 20.5, 125, 64, 44, 190, 65, 260, 47, 25, 22.5, 140, 68, 48, 206, 67, 275, 51, 28, 25.5, 150, 75, 51, 229, 72, 300, 55, 32, 29.5, 165, 78, 54, 229, 76, 300, 58, 32, 29.5, 165, 78, 57, 243, 78, 330, 61, 34, 31.5, 115, 88, 64, 276, 88, 375, 69, 38, 35.5, 200, 100,
All dimensions in millimetres., Note, For wire ropes of intermediate sizes, the next larger size of thimble shall be used., Dimension M is the standard pin hole and the largest pin-hole for each thimble. Should a, smaller pin-hole be required the diameter of this shall be stated in the enquiry and order.
Features
Basket is cast steel.
Wedge socket terminations have an efficiency rating of 80% based on the catalog strength of XXIP wire rope.
Wedges are color coded for easy identification.
Blue - largest wire line size for socket.
Black - mid size wire line for socket.
7/16" on US4
9/16" on US5
Orange - smallest wire line size for socket.
Cast into each wedge is the model number of the socket and the wire line size for which the wedge is to be used.
Cast into each socket is the name "McKissick", "Crosby" or "CG", its model number and its wire line range.
By simply changing out the wedge, each socket can be utilized for various wire line sizes (Ensure correct wedge is used for wire rope size).
Load pin is forged and headed on one end.
US-422 wedge sockets contain a hammer pad (lip) to assist in proper securement of termination.
Crosby products meet or exceed all the requirements of ASME B30.26 including identification, ductility, design factor, proof load and temperature requirements. Importantly, Crosby products meet other critical performance requirements including fatigue life, impact properties and material traceability, not addressed by ASME B20.26.
UWO-422 Wedges are to be used only with the
US-422 Wedge Socket Assemblies.
Close Spelter Sockets
All Dimensions in mm.
Factor Of Safety 5:1 Tensile Strength: 1770/1960 N/mm2
Note
The capacity indicated in the above table, for basket hitch and choker itch is for guidance only, vertical column is the actual load the slings can be tested and certified in other words safe working load is applicable for vertical lift only.
Nominal Size of Rope
A, B, C, D, E, F, G, H, J, K, L,
(1), (2), (3), (4), (5), (6), (7), (8), (9), (10), (11), (12), 08, 22, 38, 13, 34, 54, 09, 04, 3.5, 62, 04, 30, 10, 24, 46, 15, 38, 64, 11, 06, 5.5, 76, 05, 34, 12, 32, 60, 19, 44, 80, 13, 08, 7.5, 90, 06, 44, 14, 32, 60, 21, 44, 80, 15, 08, 7.5, 90, 06, 44, 16, 40, 72, 23, 58, 98, 17, 08, 7.5, 114, 08, 56, 18, 44, 80, 29, 66, 110, 19, 10, 9.5, 125, 08, 60, 20, 50, 94, 31, 74, 124, 21, 12, 11.0, 150, 10, 70, 22, 58, 102, 34, 82, 134, 24, 121, 11.0, 165, 10, 78, 24, 64, 108, 36, 92, 150, 26, 12, 11.0, 176, 10, 84, 25, 70, 118, 37, 108, 162, 27, 14, 13.0, 200, 10, 90, 29, 76, 132, 41, 112, 176, 31, 16, 14.5, 230, 12, 100, 32, 96, 152, 44, 134, 196, 34, 16, 14.5, 250, 12, 120, 35, 104, 174, 48, 152, 228, 38, 19, 17.5, 300, 16, 136, 38, 114, 198, 54, 165, 254, 41, 24, 22.0, 330, 18, 150, 41, 114, 198, 56, 165, 254, 44, 24, 22.0, 330, 18, 150, 44, 125, 222, 57, 178, 285, 47, 26, 23.5, 355, 25, 175, 48, 134, 246, 67, 190, 315, 51, 28, 25.5, 380, 28, 190, 51, 140, 256, 70, 330, 330, 55, 30, 27.5, 400, 28, 196, 54, 140, 256, 70, 200, 330, 58, 30, 27.5, 400, 28, 196, 57, 146, 270, 76, 216, 355, 61, 32, 29.5, 425, 30, 206, 64, 156, 308, 95, 240, 400, 69, 44, 41.0, 450, 32, 220, 70, 200, 400, 120, 275, 500, 75, 60, 57.0, 480, 40, 280,
Note, For wire ripes of intermediate size, the next larger size of thimble shall be used., These dimension are minimum for thimblas of nominal size up to and including 41 only
Crosby Fittings
Oblong Master Link
Item No. W.L.L (tones) Dimensions (mm) N.W IL IW
D
8-003-06
1.5
100
60
11
0.2
8-003-0806
3.2
120
70
14
0.4
8-003-1008
4.0
140
80
17
0.7
8-003-13
6.3
160
90
19
1.0
8-003-1310
8.0
160
22
22
1.5
8-003-16
11.5
190
25
25
2.2
8-003-1613
15.0
180
105
28
2.7
8-003-19
17.0
200
120
30
3.5
8-003-2216
20.0
240
140
34
5.1
8-003-26
25.0
250
150
38
7.0
8-003-2619
30.0
250
150
40
8.0
Open Spelter Sockets
All Dimensions in mm.
Marzoli Ring
High quality spare parts for Marzoli machines manufacture, importers and suppliers in India.
We use the most advanced technology and graded raw materials to manufacture the Textile Machinery Marzoli Spare Parts like Marzoli Rings, Peg etc.
We have been regularly supplying this "Marzoli Spare Parts" to many contractors and associated people in this Field across India.
We would request to you to please send to us your enquiries for the same so that we can send to you more details and our commercial offer for the same.
Choice of several systems available Choice of ratchet systems Endless or two part versions Choice of 25mm - 75mm wide polyester webbing Anti-abrasion protection available Anti cutting protection available Conforms to B.S. 5759: 1987
Ratchet Reference, Minimum Breaking Strength, Rated Assembly Strength, Web Width (mm), Two Part (kg), Endless (kg), Two Part (kg), Endless (kg), KRL-25, 1200, 2400, 600, 1200, 25, KRL-35, 3000, 6000, 1500, 3000, 35, KRL-50, 5000, 10000, 2500, 5000, 50, KRL-75, 8000, 16000, 4000, 8000, 75, Cambuckle Reference, Minimum Breaking Strength, Rated Assembly Strength, Web Width (mm), Two Part (kg), Endless (kg), Two Part (kg), Endless (kg), KCB-25, 250, 500, 125, 250, 25, KCB-35, 1000, 2000, 500, 1000, 35, KCB-50, 1500, 3000, 750, 1500, 35
Features
Zebra manufactures two basic types of lashing systems, which are each available in either two part or endless configurations, with a wide variety of different end terminals.
Cambuckle
Compact and light in weight, Cambuckle lashings are ideal for securing light loads, the tension being applied by pulling the lashing hand tight. The Lashing release mechanism operates by depressing the thumb bar. No pre-tensioning of the webbing is possible. Cambuckle lashings are available in a range of Minimum Break Strengths from 250 to 1000 kg.
Ratchet Systems
For medium to heavy duty applications, Zebra offers a very wide variety of Ratchet Lashings Systems in Minimum Break Strengths ranging from 500 to 8000 kg. 25mm, 35mm, 50mm and 75mm webbing widths are available depending upon the loading requirements of the selected Lashing system.Within the range are many different types of Ratchet systems, all carefully designed and engineered to exert the right amount of pre-tensioning to the lashing.
How to order Lashings
Having first selected the appropriate Minimum Breaking Strength, the lashing format must next be considered. Here, there are two options: Two-Part or Endless, with the possibility to specify the fixed and overall lengths of a Two Part Lashing or the overall length of an Endless Lashing.
FL= Fixed Length
OL= Overall Length
Two Part
The colour combination as shown in the chart is a mere indicator, however the colour may change subject to availability of raw materials.
Features
Two types : Flat webbing & Endless sling
Flat and wide load bearing surface
Lifts smooth and fragile objects without risk of damage
High strength to weight ratio
Colour coded for identification even when soiled
Wide variety of lifting modes
Anti-abrasion webbing sheave (AAWS) protection available
Anti-cutting Sobitex polyurethane sleeves to protect your webbing slings from extra sharp edges
Conforms to B. S. 3481 Part 2
Zebra flat webbing slings are manufactured from high tenacity, 100% polyester yarn. Simplex
slings is a single layered webbing. Sling ends are terminated either in reinforced loops or any
combination of metal end fittings. Manufacturer’s test certificate is provided for safe work load
along with the slings. Simplex slings are preferred because of their broad width which gives wider
support to lifts. The slings are of three types, namely simplex sling with soft eyes, simplex sling
with metal end fitting and endless sling. They normally lift loads with the sling revved around the
load (Choke hitch), or on two parts of the sling (Basket Hitch). They are tested in straight pull.
Factor of safety for webbing 1:7
The colour combination as shown in the chart is a mere indicator, however the colour may change subject to availability of raw materials
Features
Soft, supple, and light in weight, easy to handle.
Internationally identifiable colour code, SWL shown on slings and also shown by the way of woven stripes i.e. each black stripe for each ton.
Being endless, wears evenly as there is no single point use.
Ideally suited for lifting smooth, polished or coated objects.
Conforms to B. S. 6668 Part 2 and Indian standards.
Zebra Round Slings are light weight compared to the working load ratio and being Polyester
do not rust or corrode as in metal slings.
These slings have no danger of hand injury to workman caused by cut wires and does
not spark, hence can be used explosive environment.
The elongation factor on load is only 3%, hence it absorbs the load while lifting.
Zebra Round Slings flattens and adjust to contours of the load point thus forming a firm grip.
Factor of safety for webbing 1:7 and for steel terminals 1:4
Features
Zebra has set the industry standard for the lowering-in Belt with ten years of continuous
improvement.
The lowering-in belt system consist of two parts
The steel head iron (hook iron, lifting iron or bail).
The sling fabric.
The sling fabric is woven from high tenacity polyester yarn.
The steel belt end and the head irons are designed for ease of use, quick and easy coupling
and uncoupling.
The lowering-in belt sling system is designed for long and durable life and is conservatively rated
with a safety factor of 5:1. These figures are given on the data sheet overleaf. A certificate to this
effect for individual belts and head irons can be provided on request. Hooks are stamped with the
safe working load. All sling fabrics have a tag or plate with the safe working load.
Manufactured from duplex polyester webbing slings joined together to be used with heavy duty steel terminals.
High load capacity for lowering pipes.
High safety, low elasticity and resistant to ultra-violet rays.
Simple on-site belt replacement in minutes with advanced terminal design.
Economical in use due to long working life.
Extra heavy duty lowering belt can be supplied on request.
Multi Leg Slings
Polyster Slings
Special Features
Choice of two, three or four-leg versions.
Webbing or Round slings depending on applications.
Length of legs to order.
Special Webbing/Chain combinations to order.
Anti-abrasion protection available.
Anti-cutting protection available.
High strength to weight ratio.
Color code for positive identification, even when soiled.
Only hooks and link are metal components.
Conform fully to B. S. 3481 Part 2 B. S. 6668 Part 2 and the European Standard Draft pr.EN 1492-1 and 1492-2.
General Description
Zebra Multi-Leg Slings are manufactured using either Round slings or Duplex Webbing Slings, depending upon the type and the Safe Working Load.
Hooks, master links and auxiliary links are manufactured from quenched and tempered alloy steel. Duplex Slings are stitched directly onto the metal components, Round slings being attached via auxiliary links. All Round slings are fitted with protective slaving and anti-abrasion or anti-cutting protection can also be specified as required.
Please note that further information on the general performance, specification, safety in use and maintenance of these products is covered in more detail in the sections on Round slings or Webbing Slings
Safe Working Load Angles
The Safe Working Load values quoted in the tables have been rated using the uniform load method for a maximum angle for each leg of 45 degrees from the vertical, as shown in the diagrams. Slings may be rated at greater angles if required, please consult Zebra for further details. The textile elements of these Slings have a minimum safety factor of 7:1 and the metal elements a safety factor of 4:1. All slings are serialized and issued with a test certificate.
Clevis Hooks
S-314A
S-314A Clevis Chain Hook with Integrated Latch
Chain size S-314A Stock No. Grade 80 Alloy Chain Working Load Limit (tons) 4:1* Weight each kg Dimensions (mm)
inch mm DE G K R T
-612250201.120.3266.020.620.016.072.326.0
1/4-5/167-812250212.000.7089.027.428.020.598.032.6
3/81012250913.151.29110.536.129.324.0125.342.2
1/21312251615.32.34138.538.642.129.5144.549.2
5/81612251628.003.67166.548.552.038.0172.658.9
Features
Hook is Forged Alloy Steel
Quenched and Tempered.
Integrated heavy duty latch.
Large throat opening
Meets ASTM A-952-96 and proposed Euronorm standards for Grade 80 chain fitting
Anti-fouling due to carefully designed contours.
Individually Proof Tested at 2.5 times the Working Load Limit with certification.
Fatigue rated.
Cargo Hooks
Standard Trapezoidal section point Hooks with Shank
Note
Undercut according to IS - 1369 - 1961
Calculating formulae for C:
For MS, C = 26.73 P
For HS, C = 23.17 P
# Machined shank diameter (Min)
See IS: 4218-1967 ISO metric screw threads
$ Boundary dimensions of rolling bearings for general engineering purposes.
MS = Mild Steel
HS = High Tensile Steel
Eye Hooks For Chain
Mild Steel D Shackels
Shackles
ut Bolt Type
Anchor Bow Shackle
Round Pin
Anchor Bow Shackle
SL-2130
Bolt type anchor shackles with thin head bolt-nut with cotter pin. Meets the requirements of Federal Specification
SL-209
Round pin anchor shackles meet the requirements of Federal Specification
Working
Load Limit
Tonnes
ISS Crosby,Body Dia
d
C
(mm),Pin Dia
D
B
(mm),Jaw Inside Width (W)
A
(mm),Bow Dia
(F)
(mm),Inside Length
C
(mm),Eye Outside Dia
(E)
(mm),Average Weight with Nut Bolt Type Pin (kg)
0.33,4.8
6.4
9.7
15.2,22.3,14.2,0.0
0.5,6.4,7.9,11.9,19.8,28.7,15.5,0.1
0.75,7.9,9.7,13.5,21.3,30.9,19.1,0.1
1.0,9.7,11.2,16.8,26.1,36.5,23.1,0.1
1.5,11.2,12.7,19.1,28.7,42.9,26.9,0.2
2.0,12.7,16.0,20.6,33.3,47.7,30.2,0.3
3.25,16.0,19.1,26.9,42.9,60.5,38.1,0.6
4.75,19.1,22.4,31.8,51.0,71.0,46.0,1.0
6.5,22.4,25.4,36.6,58.0,84.0,53.0,1.5
8.5,25.4,28.7,42.9,68.5,95.0,60.5,2.4
9.5,28.7,31.8,46.0,74.0,108.0,68.5,3.1
12.0,31.8,35.1,51.5,82.5,119.0,76.0,4.3
13.5,35.1,38.1,57.0,92.0,133.0,85.0,6.0
17.0,38.1,41.4,60.5,98.5,146.0,92.0,7.8
25.0,44.5,51.0,73.0,127.0,178.0,106.0,13.8
35.0,51.0,57.0,82.5,146.0,197.0,122.0,20.4
55.0,66.5,70.0,105.0,184.0,267.0,145.0,38.9
85.0,76.0,82.5,127.0,200.0,330.0,165.0,70.0
120.0,92.0,95.0,133.0,229,372.0,203.0,120.0
150.0,104.0,108.0,140.0,254.0,368.0,229.0,153.0
Features
Working Load Limit permanently shown on every shackle.
Forged - Quenched and Tempered, with alloy pins.
Capacities1 ton to 150 tons.
Shackles 55 tons and smaller can be can be furnished proof tested with certificates to designated
standards, such as ABS, DNV, Lloyds, or other certification.
Material Certification (Chemical) must be requested at the time of order.
Made from SAE 8620
S.W.L. on Hook tons, No of Sheaves, A, mm, B, mm, For Dia. Wire Rope mm, D, mm, L, mm, E, mm, F, mm, R, mm, Approx. Wt. per Pc kg, 10, 1, 350, 300, 20, 55, 720, 33, 30, 35, 175, 13, 1, 350, 300, 20, 70, 790, 39, 35, 40, 190, 17, 1, 450, 400, 22, 75, 960, 48, 40, 50, 210, 12, 2, 300, 250, 18, 40, 750, 30, 28, 30, 130, 12, 2, 350, 300, 20, 40, 800, 30, 28, 30, 170, 27, 2, 400, 250, 22, 70, 1060, 42, 40, 42, 220, 27, 2, 450, 400, 22, 70, 1110, 42, 40, 42, 260, 35, 2, 450, 400, 22, 80, 1220, 48, 45, 50, 280, 15, 3, 300, 250, 18, 45, 750, 30, 25, 30, 145, 18, 3, 350, 300, 20, 50, 850, 30, 28, 30, 190, 30, 3, 400, 350, 22, 60, 1050, 39, 35, 40, 315, 35, 3, 400, 350, 22, 70, 1125, 39, 35, 40, 315, 20, 4, 350, 300, 20, 55, 870, 30, 28, 30, 290, 27, 4, 350, 300, 20, 55, 980, 30, 28, 30, 290, 32, 4, 350, 300, 20, 60, 1075, 33, 30, 33, 310, 45, 4, 450, 400, 22, 70, 1300, 40, 35, 40, 475, 45, 4, 500, 450, 26, 70, 1300, 40, 35, 40, 500,
Note, More and larger Sheaves: on request, Hooks: plain or with thrust bearing, Bearing type of sheaves: Roller / Ball Bearing, Safety latch: on request, Also available with Ramshorn hook., Weight: can be varied on request., Crane blocks of smaller & larger capacities are available on order.
A General Idea Indicating The Safe Working Loads Of Our Blocks, Dia of Sheave Circf. of Rope, 6, 1-1 1/4, 7, 11/4-1 1/2, 8, 11/2-1 1/4 10, 1 1/4 2 1/4 12, 2 1/4-2 1/2, 14, 2 1/2-3, 16, 3-3 1/2, 18, 3 1/2-4, S.W. L. tons, Single, Sheave, 0.75, 1.5, 2, 3, 5, 6, 7, 10, Double, Sheave, 1, 2, 3, 5, 8, 10, 15, 20, Triple, Sheave, 1.5, 2.5, 5, 10, 12, 15, 20, 25, Safe Working Loads (S.W. L.) Of Rigs B. S.: 4018-1966, Dia of Sheave, Dia of Rope, S.W. L., per Single, part of rope, Ton, Safe Working Loads of Rigs, inch mm inch mm 1/1 Rig Ton 2/1 Rig Ton 2/2 Rig Ton 3/2 Rig Ton 3/3 Rig Ton, 5, 127, 3/8, 9, 0.75, 1.5, 2.25, 3.0, 3.75, 4.5, 6, 152, 7/16, 11, 1.0, 2.0, 3.0, 4.0, 5.0, 6, 7, 177, 1/2, 13, 1.25, 2.5, 3.75, 5.0, 6.25, 7.5, 8, 203, 9/16, 14, 1.50, 3.0, 4.50, 6.0, 7.40, 9.0, 9, 228, 5/8, 16, 2.0, 4.0, 6.0, 8.0, 10.0, 12.0, 11, 279, 3/4, 19, 3.0, 6.0, 9.0, 12.0, 15.0, 18.0, 12, 304, 7/8, 22, 4.0, 8.0, 12.0, 16.0, 20.0, 24.0, Selection Criteria: Sheave Dia/Rope Dia = At least 12, The safe working load per single part of rope is approximately one sixth of the nominal breaking load of ropes as 2 2 specified in B.S.302 621 in the 6 x 37 group of tensile strength 100/110, ton / inch (160/175 kgf/mm ). This is the nominal breaking load on which the design of blocks to this standard is based., The manner of test laid down in schedule II of DOCK Workers (Safety, Health, and Welfare)Regulations, 1990, is as follows:, Article of Gear, Proof Load, Single sheave pulley block, Four times the safe working load, Multiple sheave block with safe working load up to and including 20 tons, Twice the safe working load, Multiple sheave block with safe working load over 20 tons up to and including 40 tons, 20 tons in excess of the safe working load, Multiple sheave block with safe working load over 40 tons, One and a half times the safe working load, Note, Higher capacity pulley blocks manufactured against order., Crane Block, Snatch Block
Nominal Size, Outside Link Length, Outside Link Width, Pitch, Capacity, WT / MTR, GR80, GR30, dn, 5dn to 4.75dn, 3.25dn to 3.5 dn Max, 3dn, SWL, MBL, SWL, MBL, d, l, w, p, TONS, TONS, TONS, TONS, KGS,
5, 25, 18, 15, 0.80, 3.20, 0.50, 6, 30, 21, 18, 1.10, 4.40, 0.44, 1.76, 0.83, 7.1, 35.5, 25, 21.3, 1.60, 6.40, 0.63, 2.52, 1.10, 8, 40, 28, 24, 2.00, 8.00, 0.80, 3.20, 1.40, 9, 45, 32, 27, 2.50, 10.00, 1.00, 4.00, 1.80, 10, 50, 35, 30, 3.20, 12.80, 1.25, 5.00, 2.10, 11, 55, 39, 33, 3.80, 15.20, 1.50, 6.00, 3.00, 12, 60, 42, 36, 4.60, 18.40, 1.80, 7.20, 3.10, 14, 70, 49, 42, 6.30, 25.20, 2.40, 9.60, 4.50, 16, 80, 56, 48, 8.00, 32.00, 3.20, 12.80, 5.60, 18, 90, 63, 54, 10.00, 40.00, 4.00, 16.00, 7.50, 20, 100, 70, 60, 12.50, 50.00, 5.00, 20.00, 9.00, 22, 110, 77, 66, 16.00, 64.00, 6.00, 24.00, 11.70, 25, 125, 88, 75, 20.00, 80.00, 7.80, 31.20, 14.00, 28, 140, 98, 84, 25.00, 100.00, 9.70, 38.80, 17.60, 32, 160, 112, 96, 32.00, 128.00, 12.70, 50.80, 23.40, 36, 180, 126, 108, 40.00, 160.00, 16.00, 64.00, 29.00, 40, 200, 140, 120, 50.00, 200.00, 19.80, 79.20, 36.00, 45, 225, 158, 135, 63.00, 252.00, 25.00, 100.00 45.00
GR80 Chains Confirm To Is : 6216/82 (Calibrated) & IS : 6215/82 (Non-Calibrated)
GR30 Chains Confirm To Is : 2429/82 Part 2 (Calibrated) & IS : 2429/82 Part 1 (Non-Calibrated)
Long link Chains
Nominal Size, Outside Link Length, Outside Link Width, Pitch, Capacity, GR80, dn, 6dn, 3.6dn Max, 4dn, SWL, MBL, d, l, w, p, TONS, TONS, Actual, 13, 110, 55, 84, 1, 4, 16, 149, 63, 117, 3.2, 12.8, 18, 150, 69, 114, 4.25, 17, 20, 159, 75, 119, 5, 20, As per catalog, 13, 78, 47, 52, 0, 16, 96, 58, 64, 0, 18, 108, 65, 72, 0, 20, 120, 72, 80, 0, 22, 132, 79, 88, 24, 144, 86, 96, 26, 156, 93, 104, 28, 168, 101, 112, 30, 180, 108, 120, 32, 192, 115, 128
Chain Accessories
Kentor Shackle
Anchor Shackle
Sole selling agent in India of Jiangsu Asian Star Anchor Chain Co. Ltd. for Anchors Chains
Common Link
Enlarged Link
Testing Load Of Stud Link Anchor Chain And Accessories
Chain Dia. Grade2 Grade3 Approx. mass (27.5mm) chain Dia Grade2 Grade3 Approx. mass (27.5mm), Proof Load,Breaking Load,Proof Load,Breaking Load,Proof Load,Breaking Load,Proof Load,Breaking Load, c=0.0098,c=0.0137,c=0.0137,c=0.0196,c=0.0098,c=0.0137,c=0.0137,c=0.0196, mm,KN,KN,KN,KN,Kg,mm,KN,KN,KN,KN,Kg, 14,82,116, 116, 165, 130,64, 1560,2190,2190,3130,2529, 16,107,150,150,216,170,66,1660,2310,2310,3300,2689, 17.5,127,179,179,256,189, 68,1750,2450,2450,3500,2858, 19,150,211,211,301,226,70,1840,2580,2580,3690,3025, 20.5,175,244, 244, 349,263, 73,1990,2790,2790,3990,3341, 22,200, 280, 280, 401,303,76,2150,3010,3010,4300,3566, 24,237,332,332,476,370,78,2260,3160,3160,4500,3756, 26,278,389,389,556,439,81,2410,3380,3380,4820,4050, 28,321,449,449,642,496,84,2580,3610,3610,5160,4355, 30,368,514,514,735,564,87,2750,3850,3850,5500,4672, 32,417,583,583,833,635,90,2920,4090,4090,5840,5000, 34,468,655,655,937, 724,92,3040,4260,4260,6080,5224, 36,523,732,732,1050,812,95,3230,4510,4510,6440,5571, 38,581,812,812,1160,905,97,3340,4680,4680,6690,5809, 40,640,896,896,1280,1032,100,3530,4940,4940,7060,6174, 42,703,981,981,1400,1075,102,3660,5120,5120,7320,6423, 44,769,1080,1080,1540,1197,105,3850,5390,5390,7700,6806, 46,837,1170, 1170, 1680,1310,107,3980,5570,5570,7960,7067, 48,908,1270,1270,1810,1438,111,4250,5940,5940,8480,7606, 50,981,1370,1370,1960,1536,114,4440,6230,6230,8890, 8023, 52,1060,1480,1480,2110,1669,117,4650,6510,6510,9300,8450, 54,1140,1590,1590,2270,1780,120,4850,6810,6810,9720,8889, 56,1220,1710,1710,2430,1936,122,5000,7000,7000,9990,9187, 58,1290,1810,1810,2600,2086,124,5140,7200,7200,10280,9492, 60,1380,1940,1940,2770,2249,127,5350,7490,7490,10710,9957, 62,1470,2060,2060,2940,2373
Part #, Model, Holding, Power , Weight, (lbs), Boats Up To:, (20k Winds ), Chain, Dia., A, Height, B, Stock, Length, C, Fluke, Length, 94010, S 160, 160, 3.5, 10 Ft., 3'- 3/16", 17-1/4", 13", 9", 94011, S 00, 300, 5, 17 Ft., 3'- 3/16", 19-1/2", 14-3/4", 10-1/2", 94012, S 600, 600, 9, 27 Ft., 3'- 3/16", 24", 18-1/4", 12", 94013, S 920, 920, 14, 31 Ft., 4'- 1/4", 28-1/4", 21-1/2", 14-1/4", 94014, S 1300, 1300, 16, 36 Ft., 4'- 3/16", 31-3/4", 24", 16-1/2", 94015, S 1600, 1600, 25, 40 Ft., 5'- 5/16", 35", 26-3/4", 19", 94016, S 2000, 2000, 43, 45 Ft., 6'- 3/8", 40-1/4", 31", 22", 94017, S 3000, 3000, 70, 55 Ft., 8'- 1/2", 50", 38", 26-1/2", 94018, S 3500, 3500, 100, 60 Ft., 8'- 5/8", 54", 41", 30-1/2"
* Tested under equivalent conditions and average bottom conditions
Chain Pulley Block
10000 kg.Chain Pulley Block
5000 kg. Chain Pulley Block
Model
HS-C 1/2
HS-C1
HS-C1 1/2
HS-C2
HS-C3
HS-C5
HS-C10
Capacitv
Ton
0.5
1
1.5
2
3
5
10
Standard Lift
m
3
3
3
3
3
3
3
Runnina test load
Ton
0.75
1.5
2.25
3
4.5
7.5
3
Headroom
(drawn closeup)
mm
270
335
410
440
480
600
720
Effort required to lift max load
N
160
314
363
324
333
412
412
No. of colums of load chain
1
1
1
2
2
2
4
Load chain dia.
mm
5
6
8
6
8
10
10
A
110
142
178
142
178
210
367
Dimensions mm
B
114
126
142
126
142
167
167
C
21.5
27
30
30
37
46
54
D
110
142
178
142
178
210
252
Net Weight
kg
7
11
17
15
24
39
72
Gross weight
kg
10
14
21
18
28
48
87
Inside Parts
Light weight and sturdy
Ease of handling
Lifelong lubrication
Minimal maintenance required
Surface hardened gears
Extended working life
Use of needle roller bearings
High operating efficiency
Smooth passage of load chain
Machine guide rollers
Smooth hand chain operation
Unique cover design
Self sustaining maintenance free friction brake
Reduce downtime
Imported grade 80 load chain for strength and wear resistance
Longer chain life
Anti-corrosive powder coated finish
Better aesthetics
Forged - Quenched and Tempered.
Proper design, careful forging, and precision controlled quench and tempering gives maximum strength without excessive weight and bulk.
Every Crosby Swivel hoist hook has a pre-drilled cam which can be equipped with a latch. Simply purchase the latch assemblies listed and snown on pages 89-91. Even years after purchase of the original hook, latch assemblies can be added.
Load rating codes stamped on each hook. 322 Swivel Hooks use the same load rating code as 319 Shank Hooks, see page 84 for proper Hook Identification Codes.
Hoist hooks incorporate markings forged into the product which address two QUICK-CHECK features:
Deformation Indicators -- Two strategically placed marks, one just below the shank or eye and the other on the hook tip, which allows for a QUIC-CHECK measurement to determine if the throat opening has changed, thus indicating abuse or overload.
Angle Indicators - Indicates the maximum included angle which is allowed between two (2) sling legs in the hook. These indicators also provide the opportunity to approximate other included angles between two sling legs.
Note
Carbon swivel hooks.75tC-15tC: proofload is 2 times working load limit.Designed with a 5 to 1 safety factor.
Alloy swivel hooks 1.5tA-22tA : proofload is 2.5 times working load limit. Designed with a 4 to Isafety factor.
Alloy swivel hook 31.5tA: proofload is 2 times working load limit. Designed with a 4 to 1 safety factor.
Self Locking Hooks
S-316N
S-316A SHUR-LOC - Eye Hook
Chain Size,S-316A Stock No.,Grade & Alloy chain working load limit(tons) 4:1,Wire Rope XIP IWRC Mechanical Splice,Weight each kg
in,mm,size (mm),Working load limit (tons) 5:1
-,6,1097918,1.12,8,0.9,0.39
1/4-5/16,7-8,1097920,2.0,11,1.7,0.82
3/8,10,1097921,3.15,13,2.3,1.47
1/2,13,1097922,5.3,16,3.5,2.70
5/8,16,1097926,8.0,22,6.9,5.78
* Ultimate Load is 4 times the Working Load Limit based on Grade 8 Chain.
Positive Lock Latch is Self-Locking when hook is loaded
Forged Alloy Steel- Quenched and Tempered
Rated for both Wire Rope and Grade 8 Chain
Meets ASTM A-952-96 and proposed Euronorm standards for Grade 8 chain fitting
Fatigue rated.
The SHUR-LOC-hook, if properly installed and locked, can be used for personnel applications and meets the intent of OSHA Rule 1926.550 (g) (4) (iv) (B)
G-414 Heavy Thimble should be used with wire rope slings
Individually Proof Tested at 2-1/2 times the Working Load Limit with certification
Trigger repair Kit available (5-4316). Consist of spring, roll pin and trigger
Designed with Engineered Flat to connect to Grade . 8 chain fittings.
Eye Hooks For Wire Rope
The most complete line of Eye hooks. Available 1/2 ton to 60 tons.
Proper design, careful forging and precision controlled quench and tempering give maximum strength.
Every Eye Hook has a pre-drilled cam which can be equipped with a latch.
Eye hooks are load rated.
Available in mild steel and alloy steel.
Single sheave with hook
Sheave Size (in)
Wire Rope Size (in)
Capacity at F. OF S. 4:1 US tons
Capacity at F. OF S. 2:1 US tons
4 1/2
3/8 - 1/2
2 1/2
5
6
3/4
8
16
6
3/4
12
24
8
3/4
8
16
8
3/4
12
24
8
1 1/8
22
44
10
5/8 - 3/4
8
16
10
3/4
12
24
10
1 1/8
22
44
12
5/8 - 3/4
8
16
12
3/4
12
24
12
1 1/8
22
44
14
3/4
12
24
14
1 1/8
22
44
Features
Bearings
The 4 1/2" Block is fitted with special bronze bush but can be fitted with taper roller bearings wIth special bronze bush if requested.
Capacity
The 4:1 capacity load given in the table are the maximum head fitting loads that should be applied to the Blocks.These capacity loads are based on a Fador of Safety of 4:1 and the Blocks are proof tested to twice this capacity load.The table also details a comparative capacity
load at Fador of Safety2:1 so that the users may compare the 'High Load' Blocks with alternative makes based on this Lower Safety Fador.
Double Sheave
Light champion snatch block as a double sheave block.
Drop forged swivel hook or swivel shackle.
Can be furnished with bronze bushing and roller bearings.
Opening features permits easy insertion of wire rope in both sheaveswith removal of one bolt.
Can be furnished with hook latch.
Pressurelube fittings.
Fatigue rated.
Manilla Rope Pulley Block,, Dia. of Sheave, Dia of Rope, S. W. L. in kg, No. Sheave, 3 1/2, 1/2", 100, Single, 31/2, 1/2", 150, Double, 3 1-2, 1/2", 250, Triple, 4", 5/8, 150, Single, 4", 5/8, 200, Double, 4", 5/8, 300, Triple, 4 3/4, 3/4", 200, Single, 4 3/4, 3/4", 400, Double, 4 3/4, 3/4", 500, Triple, 6", 1", 500, Single, 6", 1", 1000, Double, 6", 1", 1500, Triple, 7", 1 1/4 600, Single, 7", 1 1/4, 1500, Double, 7", 1 1/4, 2000, Triple, 8", 1 1/2, 1000, Single, 8", 1 1/2, 2000, Double, 8", 1 1/2, 2500, Triple, 10", 2", 1500, Single, 10", 2", 2500, Double, 10", 2", 4000, Triple
Pool Type Anchor (CB 3221 - 84)
Normal Weight, A, B, C, D, E, F
12, 385, 325, 275, 250, 65, 155, 20, 455, 385, 325, 300, 75, 185, 40, 570, 480, 410, 370, 95, 235, 60, 655, 555, 470, 425, 110, 270, 80, 720, 610, 515, 470, 120, 295, 100, 775, 655, 555, 505, 130, 320, 120, 825, 700, 595, 540, 135, 340, 160, 905, 765, 650, 590, 150, 370, 200, 975, 825, 700, 640, 160, 400, 240, 1040, 880, 745, 680, 175, 425, 280, 1090, 925, 780, 715, 180, 450, 320, 1140, 965, 820, 745, 190, 470, 360, 1190, 1005, 855, 780, 195, 490, 400, 1230, 1040, 885, 805, 205, 505, 440, 1270, 1075, 910, 830, 210, 90, 480, 1305, 1105, 940, 855, 215, 535, 520, 1340, 1135, 960, 875, 220, 550, 560, 1375, 1165, 985, 900, 230, 565, 600, 1410, 1195, 1010, 920, 235, 580, 640, 1440, 1220, 1035, 940, 240, 590, 720, 1495, 1265, 1075, 975, 250, 615, 800, 1550, 1310, 1115, 1015, 255, 635, 900, 1615, 1365, 1160, 1055, 270, 665, 1000, 1670, 1410, 1200, 1090, 275, 670, 1250, 1800, 1525, 1290, 1175, 300, 740, 1500, 1910, 1615, 1370, 1250, 315,
High Holding Anchor
Sole selling agent in India of for Anchors Dazu Xingye Marine Casting Co. Ltd.
Sole selling agent in India of for Anchors Dazu Xingye Marine Casting Co. Ltd.
Single Chain Sling
Two Leg Chain Sling
Three Leg Sling
Four leg Sling
Double Loop
Endless Sling
Proof Load Testing
After final heat treatment slings with accessories shall be tested as an assembly, multi- leg chain slings shall be tested in sections. Individual sections of the chain slings shall be subjected to 2.0 times the load to which the section will be subjected when the assembly is subjected to its working load limit in accordance with the plan.
Lifting capacity of sling / working load limit (MT)
Rating
Single Branch slings
Single branch slings shall have a working load limit equal to that of the Chain used in their construction
Multi Branch slings
Multi branch slings shall be rated at a uniform working load limit for an angle between branches of 90o-120o(45o- 60o to the vertical) or additionally a ta uniform working load limit for any angle between branches of 90o-120o(45o- 60o to the vertical ).
Uniform Load Method
Double branch slings
For all angles between branches from 0°- 90° (0°- 45° to the vertical)
WLL = 1.4 x WLL of a single branch made from similar chain. When additionally marked for angles between branches of 90°- 120° (45°- 60° to the vertical)
WLL = 1 x WLL of single branch made from similar chain.
Three and four branch slings
For all angles between branches from 0°- 90° (0°- 45° to the vertical)
WLL = 2.1 x WLL of a single branch made from similar chain. When additionally marked for angles between branches of 90°- 120° (45°- 60° to the vertical)
WLL = 1.5 x WLL of single branch made from similar chain.
S-316N
S-316A SHUR-LOC - Eye Hook
Chain Size S-316A Stock No. Grade & Alloy chain working load limit(tons) 4:1 Wire Rope XIP IWRC Mechanical Splice Weight each kg
in mm size (mm) Working load limit (tons) 5:1
6 1097918 1.12 8 0.9 0.39
1/4-5/16 7-8 1097920 2.0 11 1.7 0.82
3/8 10 1097921 3.15 13 2.3 1.47
1/2 13 1097922 5.3 16 3.5 2.70
5/8 16 1097926 8.0 22 6.9 5.78
* Ultimate Load is 4 times the Working Load Limit based on Grade 8 Chain.
Positive Lock Latch is Self-Locking when hook is loaded
Forged Alloy Steel- Quenched and Tempered
Rated for both Wire Rope and Grade 8 Chain
Meets ASTM A-952-96 and proposed Euronorm standards for Grade 8 chain fitting
Fatigue rated.
The SHUR-LOC-hook, if properly installed and locked, can be used for personnel applications and meets the intent of OSHA Rule 1926.550 (g) (4) (iv) (B)
G-414 Heavy Thimble should be used with wire rope slings
Individually Proof Tested at 2-1/2 times the Working Load Limit with certification
Trigger repair Kit available (5-4316). Consist of spring, roll pin and trigger
Designed with Engineered Flat to connect to Grade . 8 chain fittings.
Spek Type Anchor
Anchor Weight, kg., Dimensions in mm, A, B, C, D, E, H, L, 380, 600, 827, 190, 412, 258, 780, 1080, 480, 650, 902, 205, 442, 280, 846, 1170, 610, 700, 960, 221, 472, 302, 910, 1260, 735, 750, 1030, 235, 502, 320, 975, 1350, 880, 800, 1100, 251, 542, 340, 1040, 1440, 1030, 850, 1170, 270, 568, 362, 1102, 1530, 11050, 900, 1240, 286, 587, 388, 1168, 1620, 1400, 950, 1299, 295, 644, 420, 1229, 1710, 1750, 1000, 1378, 316, 671, 442, 1300, 1800, 2020, 1050, 1454, 330, 706, 460, 1362, 1890, 2360, 1100, 1514, 343, 744, 480, 1424, 1980, 2750, 1150, 1584, 362, 788, 492, 1502, 2070, 3000, 1200, 1650, 380, 801, 520, 1560, 2160, 3700, 1350, 1850, 418, 890, 580, 1743, 2430, 4000, 1400, 1927, 438, 910, 610, 1813, 2520, 5100, 1450, 2000, 451, 954, 626, 1864, 2610, 5800, 1500, 2060, 467, 998, 642, 1946, 2700, 6600, 1550, 2138, 490, 1030, 660, 2006, 2790, 8000, 1700, 2333, 533, 1118, 734, 2210, 3060,
Wire Rope Nets For Cargo Lifting
Inner Dia Outer Dia Mesh
12mm 22mm
6" x 6" or 4" x 4"
16 mm 24 mm
6 " x 6 " or 4 " x 4"
We recommend Steel wire rope
Galvanised 6/19 const.
FMC tensile strength 1960 N/mm2 RMO lay
Typical Slinging Methods (Used singly and two single legs used together)
Diameter (mm), Polypropelene Parapro Ropes, Nylon Multi filament Ropes, Breaking Strength (kgf), Runnage ( meter / kg), Wt. per Coil of 220 meters (kg), Breaking Strength (kgf), Runnage ( meter / kg), Wt. per Coil of 220 meters (kg), 4, 214, 135.00, 1.63, 320, 95.24, 2.30, 6, 602, 60.00, 3.67, 750, 44.40, 4.95, 8, 1060, 33.30, 6.60, 1345, 25.00, 8.80, 10, 1560, 22.00, 10.00, 2088, 16.20, 13.60, 12, 2210, 15.20, 14.50, 2995, 11.20, 19.60, 14, 3050, 11.00, 20.00, 4095, 8.20, 26.80, 16, 3770, 8.60, 25.50, 5300, 6.30, 35.00, 18, 4810, 6.80, 32.50, 6695, 5.00, 44.00, 20, 5800, 5.50, 40.00, 8300, 4.10, 54.00, 22, 6960, 4.50, 48.50, 10000, 3.30, 66.00, 24, 8130, 3.90, 57.00, 12000, 2.80, 78.00, 26, 9410, 3.20, 67.60, 13950, 2.40, 92.40, 28, 10700, 2.80, 78.00, 15800, 2.10, 107.00, 30, 12220, 2.50, 89.00, 17755, 1.80, 122.00, 32, 13500, 2.20, 101.00, 20000, 1.60, 139.00, 36, 16930, 1.70, 129.00, 24900, 1.25, 176.00, 40, 20510, 1.40, 158.00, 30000, 1.00, 218.00, 44, 24640, 1.13, 194.00, 35800, 0.80, 264.00, 48, 28610, 0.96, 229.00, 42000, 0.70, 312.00,
Product Attributes
Polypropelene
High breaking strength & shock absorption capacity
Good abrasion resistance & easy knotting possible
Inert to chemicals
Nylon
Excellent breaking strength & high elongation
Good shock absorption
Strong & Durable
Product Assurance
Every coil carries a test certificate for :
Material, Breaking strength & Safe working load
Applications
Defence: Rappelling, Slithering,& Jackstayropes. Arrestor Barriers & Helideck nets. Tentage & Reinforcement ropes Ropeways & Rope Bridges
Material Handling: Tower Erection & Cable Pulling Slings for Metal tube handling Pantoon Bridges Sugarcane Trolley Pulling
Safty: Safety Nets Jumping Ropes Helipad Nets Gangway Nets Escape rope ladders Scramble Nets Bulk Cargo Nets
Weight are subject to a +/- 5% variation.
All values listed are as per results confirmed in accordance to test procedures IS 7071.
All specifications pertain to regular laid ropes and are applicable to new ropes
The products indicated in this brochure do not constitute the whole range of GWRL products.
Please contact us if other sizes and characteristics are required.
GWRL reserves the right to review its product specifications.
Safe working loads is 1/16th of the breaking strength.
Steel wire ropes for marine
Use : Shipping, Fishing
About The Ropes
Made from natural hard fibres Manila & Sisal Ropes are the best of their kind in India. Made in accordance to rigid 1.5.1. specifications. Ropes 1jre available in sizes varying from 4mm. dia to 76 mm. dia in Manila (Grade - I, II & III) and Sisal (Grade 'A'). Their distinct and superior characteristics, offer both high breaking strength and maximum flexibility in use. They have a wide range of applications in various industries.
Dia in mm, Circumference in inches Min. No of yarns per strands Approx. Wt per coil of 220 meters Minimum Breaking Strength of Manilla Rope as per (as per IS: 1084/1%9) and Sisal Rope (as per IS: 1321/69), Manilla Grade I, Manilla Grade II, Manilla Grade III, Sisal, 8, 1, 3, 12, 545, 483, 419, 483, 10, 1 1/2, 4, 15, 705, 635, 559, 635, 12, 1 1/2, 6, 23, 1065, 955, 838, 955, 14, 1 3/4, 8, 31, 1450, 1285, 1118, 1285, 16, 2, 10, 42, 2030, 1805, 1576, 1805, 18, 2 1/4, 13, 49, 2440, 1880, 2135, 1880, 20, 2 1/2, 16, 61, 3250, 2845, 2215, 2845, 22, 2 3/4, 19, 73, 3860, 3405, 2972, 3405, 24, 3, 23, 88, 4570, 4065, 3556, 4065, 26, 3 1/4, 27, 103, 5335, 4725, 4140, 4725, 28, 3 1/2, 31, 118, 6095, 5325, 4725, 5325, 30, 3 3/4, 36, 138, 6860, 6095, 5385, 6095, 32, 4, 41, 155, 7875, 6860, 6071, 6860, 36, 4 1/2, 52, 197, 9650, 8635, 7570, 8635, 40, 5, 64, 244, 11940, 10415, 9703, 10415, 44, 5 1/2, 77, 298, 14225, 12700, 11024, 12700, 48, 6, 92, 352, 16765, 14735, 12955, 14735, 52, 6 1/2, 108, 414, 19560, 17275, 15088, 17275, .56, 7, 125, 479, 22355, 19815, 17425, 19815, 60, 7 1/2, 144, 549, 25400, 22605, 19813, 22605, 64, 8, 164, 639, 29000, 25700, 22600, 25700, 88, 8 1/2, 185, 707, 32000, 28500, 24700, 28500, 72, 9, 207, 792, 35800, 32700, 27600, 32700, 76, 9 1/2, 231, 881, 39500, 35000, 30000, 35000
Material Handling
Manila and Sisal Ropes are used. extensively in engineering industries and at construction sites for material handling. Due to their heavy load lifting capacity these Ropes are well suited for hauling and cargo lifting operations.
Ports And Shipping
Manila Ropes of various diameters are widely used for towing, mooring and dry docking by Port Trusts and Shipping Industries. Manila Ropes offer excellent resistance to action of water and marine organisms, and are therefore ideally, suited in the Marine Industry.
Transport
Sisal Ropes find wide applications in the domestic transport industrY for safe handling of cargo. Due to their excelient shock absorbing capability Ropes are acknowledged to be the most reliable for this end use.
Weights are subject to +- 5% maximum variation. Tensile strengths are approximately average and the minimum shall be within minus 1O% of the listed value. The values shown above are for regular aly ropes
Circ., (in) Dia. (mm) , Polypropylene Ropes:, Nylon Ropes, Maxima Ropes, Maxi-Flex Ropes, Breaking Strength (kgf), Wt. per Coil of 220 meters ( kg)., Breaking Strength (kgf), Wt. per Coil of 220 meters ( kg)., Breaking Strength (kgf), Wt. per Coil of 220 meters ( kg)., Breaking Strength (kgf), Wt. per Coil of 220 meters ( kg)., 4.0, 32, 13500, 101.00, 20000, 139.00, 18500, 101.00, 20000, 124.00, 4.5, 36, 16930, 129.00, 24900, 176.00, 23250, 129.00, 24900, 157.00, 5.0, 40, 20510, 158.00, 30000, 218.00, 28000, 158.00, 30000, 195.00, 5.5, 44, 24640, 198.00, 35800, 264.00, 34000, 194.00, 35800, 238.00, 6.0, 48, 28610, 229.00, 42000, 312.00, 39500, 229.00, 46290, 282.00, 6.5, 52, 33110, 268.00, 48800, 365.00, 45500, 268.00, 54300, 330.00, 7.0, 56, 37850, 312.00, 56000, 425.00, 52000, 312.00, 62800, 378.00, 7.5, 60, 43280, 359.00, 63800, 486.00, 59500, 359.00, 72000, 438.00, 8.0, 64, 48960, 407.00, 72000, 554.00, 67500, 407.00, 82600, 495.00, 9.0, 72, 61500, 515.00, 89900, 702.00, 84500, 515.00, 102000, 627.00, 10.0, 80, 75640, 638.00, 109800, 867.00, 104000, 638.00, 125500, 775.00, 11.0, 88, 90760, 772.00, 130800, 1049.00, 125000, 772.00, 156000, 1100.00, 12.0, 96, 107100, 916.00, 153900, 1250.00, 148000, 916.00, 185000, 1315.00, 13.0, 104, 122900, 1078.00, 182140, 1425.00, 173500, 1075.00, 216000, 1540.00, 14.0, 112, 141830, 1254.00, 210200, 1698.00, 201000, 1250.00, 250000, 1790.00, 15.0, 120, 162860, 1430.00, 240200, 1951.00, 230000, 1435.00, 286000, 2050.00
Product Attributes
Polypropylene Ropes
High breaking strength
Good abrasion resistance
Inert to chemicals
Better runnage & low elongation
Maxima (blended polymer) Ropes
Approx 40% higher breaking strength than PP
Excellent abrasion resistance
Value for money through down sizing
Nylon Ropes
Excellent breaking strength & higher elongation
Good shock load absorption
Strong & Durable
Maxi-Flex (composite fibers) Ropes
Higher strength compared to Nylon
Flexible & low elongation
Product Assurance
GWRL Test certificate with each lot. Ropes can be OCIMF certified based on customer requirement
Applications
Shipping: Mooring lines Splash target ropes Anchoring ropes Towing lines Messenger lines
Rope Articles : Towing stretchers SPM Hawsers
Oil Exploration: On board oil rigs Oil Exploration Platform
Weight are subject to a +/- 5% variation.
All values listed are as per results confirmed in accordance to test procedures IS 7071.
All specifications pertain to regular laid ropes and are applicable to new ropes
The products indicated in this brochure do not constitute the whole range of GWRL products.
Please contact us if other sizes and characteristics are required.
GWRL reserves the right to review its product specifications.
Safe working loads is 1/16th of the breaking strength.
Mining Wire Ropes
Automobile Aircraft Ropes
Galvanized wire rope for Aircraft
Galvanized steel strand for brake cable
6x7+ Core
Wire Rope Standard
6 (1+6)+ FC
6 (1+6)+ IWRC
Application :
Aircraft cables, Automotive Industry Hauling, Ropes for Ski Lifts, General Engineering purpose
Standard : EN 12385, API SPEC 9A
Double Ended Type Stretching Screws (ISS)
Rigging / Bottle Screws
Refer IS : 6132 (Part II) 1972 for Dee Shackles
Refer IS : 2315 - 1978 for Solid Thimbles
Dimensions For Tubular Bodies And Screwed Eyes
Nominal
Size
Dia of
Rope
mm
H1
B
C
Dia
D
Dia
E
F
Dia Min
K
Dia
M
Proof
Load
kn
Safe
Working Load
kn
Closed
mm
Open
mm
M12
8
330
525
230
27
10
4
20
12
177
10.0
5.0
M16
10
370
550
230
27
10
4
22
12
197
18.0
9.0
M20
12
400
570
230
34
10
4
25
16
211
28.0
14.0
M24
14
475
700
300
34
12
5
32
16
246
36.0
18.0
M27
16
550
825
360
43
12
5.5
35
20
290
44.0
22.0
M30
18
550
825
360
43
14
5.5
38
20
290
63.0
31.5
M33
20
600
875
380
48
14
6.5
44
25
325
75.0
37.5
M36
22
600
875
380
60
16
6.5
47
25
325
86.0
43.0
M39
25
660
960
400
60
16
6.5
50
25
350
100.0
50.0
M45
29
700
960
400
76
19
6.5
60
28
378
112.0
56.0
M52
32
750
1000
400
76
19
8
70
36
406
144.0
72.0
M56
35
775
1025
400
83
19
8
73
36
421
194.0
97.0
M60
38
800
1050
500
90
20
9.5
76
40
440
214.0
107.0
M64
41
1070
1450
580
95
20
13
91
47
580
286.0
143.0
M68
44
1120
1590
620
103
20
14
96
51
635
342.0
171.0
M75
48
1270
1700
660
111
20
14
103
57
690
400.0
200.0
M80
51
1360
1760
700
119
20
15
112
63
740
500.0
250.0
M90
54
1440
1860
740
127
20
16
122
69
790
624.0
312.0
Note : For intermediate sizes of wire ropes, the next larger size of bull dog grip shall be used.
Hand Operated, Double Purchase Crab Winch
Note
All welding are 5 mm fillet
Section to conform IS-226
Cast Iron Milling Cut Gears
Mild Steel side plates
Hand Operated, Treble Purchase Crab Winch
Front View Side View Capacity (kgs)
A B C D E F G H I J K L M
250
204
104
221
165
175
213
118
69
104
170
6.7
14
95
500
254
215
317
254
181
263
203
130
130
222
9.3
14
182
1000
254
215
317
254
181
263
203
130
130
222
12.7
17
182
1500
310
215
360
275
235
267
200
129
177
267
28.0
14
178
2000
349
241
381
304
250
300
300
184
206
305
12.7
17
210
3000
349
241
381
304
260
308
300
184
206
305
15.5
19
210
5000
400
315
480
570
400
500
335
225
250
460
20.0
33
315
Note
Drum : Graded Cast Iron
Worm : EN 8 or 9 heat treated
Wretch : EN 8 or 9 heat treated
Bearing : Thrust
Side plate : Mild Steel
Thickness of side plate : 8 mm
5 Ton Capacity Electric Winch.
Motor
CROMPTON/ GEC/ KIRLOSKER" Make Slipring Crane Duty Motor 960 RPM, 440 Volt, 3 phase, 1 Hr. rated 40% ED as per IS: 325 having 'B' Class insulation.
Drum
Made from Rolled steel as per IS:226 of adequate thickness with side flange. Drum running on Bearing to take adequate rope length.
Shaft
Forged from EN-8 steel machine fitted with Drum. Chassis: Fabricated from joist of adequate size as per IS: 226 to take all shocks. All the stands on the chassis are Boxed type.
Reduction
1st Reduction: through Elecon/Radicon make worm reduction Gear Box totally enclosed running on oil.
2nd Reduction: through open machine cut Gear from carbon steel & pinion made of Alloy Steel duly heat treated.
Break
Electro Magnetic Hydraulic Thruster Brake of reputed make.
Mechanical Bend Brake with screw system with Ferrodo Brake lineing.
Extra safety Ratchet pawl arrangement on the side of the drum for not moving the drum in opposite direction for extra safety.
Coupling
We will provide flex. Brake Drum coupling on the out put of motor & Input of Gear Box.
Flex. coupling pin type on the output shaft of the Gear Box & In put shaft of the pinion.
Controls
Drum controller of TAC Make 5/7 steps. Forward & Reverse mtio.
Control panel in sheet in sheet metal Box for dust, heat & water resistance containing of :
Isolator
Overload Relay
Contector
Single phase preventor
FuseHrc.
Amp. Meter
Voilt Meter (h) Neon Lamp Push Button for start & Stop Resistance Box 10 Minute rating.
Wiring & Pairrting
We will provide all wiring from weather proof ar mured copper cable of adequate size & the Winch will be painted by two coats of primer & Two coats of Grey paint.
Operator seat
We will provided operator seat by the side of controls.
Note
Speed of 5 Ton & 10 Ton winch is 8/1OMTS per minutes.
General Description
SKID Frame Type- Frame made out of heavy steel sections
M.S. Drums
M. S. Gear & Pinion. Teeth Cut on Gear Hobbing Machine for Perfect Pitch.
Reduction through Gear Box and Bull Gear & Pinion.
Hydraulic Thrustor Brake
ElectroMagneticBrake
Electro Magnetic Brake.
Manual Brake
Carbon Steel Shaft
A Safety Ratchet System
All controls within reach of operator.
Variable Speed Motor.
Load & Speed as per Requirement of the Customer.
Detail required for submission by Customer
Rope pull in Tons ( Capacity)
Speed required Mtr./per Min.
Rope size & Length required on Drum.
Available Elec. Current supply.
Description of Application.
Other accessories required with.
Short Lift Screw Jack
Hydraulic Jack: Screwed Ram Type Jacks: SR (Capacity: 125-500 Tons)
Type
SR-EHD 2/150
SR-EHD 3/150
SR-EHD 5/150
SR-EHD 8/150
SR-EHD 10/150
SR-EHD 12/150
SR-EHD 15/150
Capacity in Tons
125
150
200
250
300
400
500
Closed Height
360
360
400
400
400
445
500
Hydraulic Lift
150
150
150
150
150
150
150
Extended height
510
510
550
550
550
595
650
Ram Diameter
300
335
360
385
425
525
625
Base Size L*B
380*350
420*380
450*400
500*440
520*475
675*550
820*675
Approx.Weight in kg.
132
183
255
346
407
649
892
Designs &specifications subject to alterations for the sake of improvement without notice.
All dimensions are in approx. mm unless otherwise stated.
Other Features
Widest selection of standard capacities
Reliability through proved and accepted highest standard of quality product performance
All critical components made from selected alloy steel and electrically welded for greater strength anf safety.
Each product goes through a series of check and test to conform to Bureau of Indian standards and International Standards.
Cylinders-Seamless steal Honed Tubes to DIN 2391-C, Grade 525/E-355, Stress relieved annealed yield strength Rp 0,2 min. Tensile strength- Rm min. 600 N/mm2 .
Surface finish- Ra 0.3 ohms .
Fast and easy maintence.
Spares and Service readily and easily available.
Screwed Ram with Safety Lock Nut for Additional safety and Unlimited Duration Load Holding Advantages.
Advantages
Simple in operation.
Effortless, time saving and safe.
Suitable carrying handle provided with each jack.
Capacity 25-100 Tons
Hydraulic Jacks: Screwed Ram Type Jacks: SR (Capacity: 2- 20 Tons)
Special Features
Reliable
Solid
Compact
Light Weight
Simple Design
Versatile Performance
Type
SR 2/120
SR 3/150
SR 5/150
SR 8/150
SR 10/150
SR 12/150
SR 15/150
SR 20/150
Capacity in Tons
2
3
5
8
10
12
15
20
Closed Height
205
235
248
248
252
252
260
260
Hydraulic Lift
120
150
150
150
150
150
150
150
Extended height
325
385
398
398
402
402
410
410
Ram Diameter
30
30
36
43
46
52
58
65
Body Diameter
65
65
72
86
90
98
112
126
Base Size L*B
115*115
115*115
125*125
150*140
150*150
150*150
170*170
180*180
Approx.Weight in kg.
5
6
8
10
11
12
16.5
22
Designs &specifications subject to alterations for the sake of improvement without notice.
All dimensions are in approx. mm unless otherwise stated.
Other Features
Widest selection of standard capacities
Reliability through proved and accepted highest standard of quality product performance
All critical components made from selected alloy steel and electrically welded for greater strength anf safety.
Each product goes through a series of check and test to conform to Bureau of Indian standards and International Standards.
Cylinders-Seamless steal Honed Tubes to DIN 2391-C, Grade 525/E-355, Stress relieved annealed yield strength Rp 0,2 min. Tensile strength- Rm min. 600 N/mm2 .
Surface finish- Ra 0.3 ohms .
Fast and easy maintence.
Spares and Service readily and easily available.
Screwed Ram with Safety Lock Nut for Additional safety and Unlimited Duration Load Holding Advantages.
Advantages
Simple in operation.
Effortless, time saving and safe.
Suitable carrying handle provided with each jack.
