EP conveyor belt Polyester conveyor belt, , also called EP or PN conveyor belt, whose tension resistant body is canvas woven by polyester in warp and polyamide in weft.The belt has the characteristics of low elongation in warp and good trough ability in weft, good water resistance, good wet strength, suitable for medium, long distance and heavy-load transportation of materials.Because of the high initial modulus of polyester, the belts can choose a relative low safety factor.Specification Availability:Carcass Fabric structure Type No. of plies Cover thickness   (mm) Belt width   (mm) Warp Weft Top Bottom EPPolyesterNylon-66EP802-63.0-18.01.5-10.0300-5000EP100EP125EP150EP200EP250EP300EP350EP400EP500We could offer belt with cover grade in accordance to International standard such as DIN 22102, RMA, AS 1332, SABS 1173/2000, IS 1891, BS 490, JIS K 6322, etc.Standards Cover Rubber Adhesion Tensile Strength Elongation at break Abrasion Cover to Ply Cover to Ply Ply to Ply DIN 22102 Mpa % mm3 N/mm      (?¤1.5mm) N/mm      (>1.5mm) N/mm DIN 22102-Z153502503.54.55DIN 22102-W18400903.54.55DIN 22102-Y204001503.54.55DIN 22102-X254501203.54.55Standards Cover Rubber Adhesion Tensile Strength Elongation at break Abrasion Cover to Ply Cover to Ply Ply to Ply AS 1332 Mpa % mm3 N/mm      (1.9mm) N/mm      (>1.9mm) N/mm AS 1332-N1740020044.86AS 1332-M2445012544.86AS 1332-E1430044.86AS 1332-A174007044.86Standards Cover Rubber Adhesion Tensile Strength Elongation at break Abrasion Cover to Ply Cover to Ply Ply to Ply RMA Mpa % mm3 N/mm      (1.6mm) N/mm      (>1.6mm) N/mm RMA-I1740034.44RMA-II1440034.44Standards Cover Rubber Adhesion Tensile Strength Elongation at break Abrasion Cover to Ply Cover to Ply Ply to Ply SANS 1173 Mpa % mm3 N/mm N/mm A184007057C2040015057M2545012057N1740015057
Nylon Conveyor Belt: Nylon is one of the best quality synthetic fibers the rubber industry uses nowadays.The nylon canvas is woven by nylon fabric both in warp and in weft.It is the most widely used fabric in rubber industry, and its outstanding merits are its high abrasion resistance, high tensile strength and good fatigue resistance.Conveyor belt with nylon canvas inside has the characteristics of thin belt body, high tensile strength, good shock resistance, good trough ability, high adhesion between plies, splendid flexibility and long working life.Nylon conveyor belts are suitable for medium, long distance and heavy-load transportation of materials, widely used in mining, metallurgical industry and architectural industry, ports.Specification Availability:Carcass Fabric structure Type No. of plies Cover thickness  (mm) Belt width (mm) Warp Weft Top Bottom NNNylon-66Nylon-66NN802-63.0-18.01.5-10.0300-5000NN100NN125NN150NN200NN250NN300NN350NN400NN500It is suitable for conveying in normal temperature various non-corrosive pointless lumps, granular or powders such as coal, coke, sand and cement in bulk or packaged.We could offer belt with cover grade in accordance to International standard such as DIN 22102, RMA, AS 1332, SABS 1173/2000, IS 1891, BS 490, JIS K 6322, etc.Standards Cover Rubber Adhesion Tensile Strength Elongation at break Abrasion Cover to Ply Cover to Ply Ply to Ply DIN 22102 Mpa % mm3 N/mm  (1.5mm) N/mm  (>1.5mm) N/mm DIN 22102-Z153502503.54.55DIN 22102-W18400903.54.55DIN 22102-Y204001503.54.55DIN 22102-X254501203.54.55Standards Cover Rubber Adhesion Tensile Strength Elongation at break Abrasion Cover to Ply Cover to Ply Ply to Ply AS 1332 Mpa % mm3 N/mm (1.9mm) N/mm  (>1.9mm) N/mm AS 1332-N1740020044.86AS 1332-M2445012544.86AS 1332-E1430044.86AS 1332-A174007044.86Standards Cover Rubber Adhesion Tensile Strength Elongation at break Abrasion Cover to Ply Cover to Ply Ply to Ply RMA Mpa % mm3 N/mm (1.6mm) N/mm(>1.6mm) N/mm RMA-I1740034.44RMA-II1440034.44Standards Cover Rubber Adhesion Tensile Strength Elongation at break Abrasion Cover to Ply Cover to Ply Ply to Ply SANS 1173 Mpa % mm3 N/mm N/mm A184007057C2040015057M2545012057N1740015057
Heat Resistant Conveyor Belts Product features: Suitable for conveying hot material like powder or clump materials at high temperature.Ideal for conveying sintered ores, cokes, soda ash, chemical fertilizer, slag and foundry.It can resist high temperature.The rubber compound used in the cover have been designed to avoid premature aging due to contact with any source of heat.Heat resistant conveyor belt can be divided into three types according to working temperature range: HRT-1 =100°C, HRT-2=125°C, HRT-3=150°C.Physical property indexes Item Type 1 2 3 Range HardnessDifference before and after aging (IRHD)20±20Maximum value after aging (IRHD)85Tensile StrengthChange rate of property % 253040Minimum value after aging /Mpa12105Breaking ElongationChange rate of property % 5055Minimum value after aging %200180High Temperature Resistant Conveyor Belts: The belt carcass of this product is EP fabric of high modulus, low shrink, and high breaking tensile strength.Cover rubber of this product uses EPDM rubber or chlorobutadiene rubber that has very good high temperature resistance.The belt is made with extra care after mixing rubber with high temperature resistant materials, assembling and vulcanizing.The belt can bear 250°C even 500°C high temperature for a short time.It is suitable for use in cement, metallurgical and steel industry.
