Chemical Name: Amorphous Silica
Product Name: Topfine N98
Topfine N98 is an amorphous (non-crystalline) silicon dioxide consisting of perfectly spherical primary particles (150 nm mean dia). It is inert, non-toxic and eco-friendly. It will not decompose even in a fire.
TOPFINE N98 is readily dispersed in, and compatible to most thermoplastics elastomers and WPC.
Flame retardancy: TOPFINEN98 is a flame retardant synergist that improves the char strength and makes the flame retardant additives (ATH, MDH, ATO, APP, etc) work more efficiently, allowing a reduction in the addition level of the flame retardants. It can replace 30% ATO without flame retardent effect changing.
Rheology: TOPFINEN98 acts like sub-micron ball bearings, reducing the torque in mixing (saving energy and may allow a higher filler loading). It can reduce the buildup of plate out by lowering the friction against the tooling in an extruder (better and a more uniform flow and better surface). The ball bearing effect also helps to disperse inorganic fillers and additives, making the compounds more homogenous.
Dynamic fatigue: TOPFINEN98 shows excellent fatigue resistance, brings longer service life, brings lower risk of failure, increasing more than 50% property of fatigueresistance.
Ceramic micro powder MB-1 MB-2
TOPFINE® MB-1 MB-2 Ceramic powder is a kind of lightweight non-metallic multi-functional materials, main composition is SiO2 and Al2O3, good dispersibility, high covering power, high whiteness, good suspension, good chemical stability, good plasticity, high heat resistance, small density, low ignition loss, good light scattering and good insulation.
Can improve the coating adsorption, corrosion resistance, durability, scrub resistance, corrosion resistance and high temperature resistance, improve the mechanical properties of the paint film, increase transparency and improve fireproof performance, can be used for corrosion protection, fire prevention, high temperature resistant, powder, architectural coatings, and various industrial, civil coatings, particularly suitable for specular half optical coatings and its agent, dosage of alternative titanium dioxide, eliminate the light caused by the use of titanium pigment flocculation phenomenon, prevent coating yellowed, and can reduce production cost.
PRODUCT HIGHLIGHTS
â?� Suitable for high gloss semi-gloss coatings and other capacitors.
â?� Replace titanium dioxide, prevent paint from yellowing
â?� Reduce factory produce cost
â?� Good dispersion, high hiding power and high whiteness
â?� Improve the adsorption of paint
â?� Increase transparency and improve fire performance
â?� The hollow structure weight reduces the weight of the product.
Item
modified hollow ceramic powder MB-1
modified hollow ceramic powder MB-1
application
Appearance ï¼? white powder
1 Civil building paint
2 Solid industrial coating
3 Solvent industrial surface paint, electrophoretic paint
4 Maintenance coating
5 Powder coating
6 Coil coating
7 primer paint
8 Especially suitable for water-base coating
Whiteness GE >70 >93
Particle size (μm ) 3-5μm
Packing density(g/cm3) 0.6-0.8
Oil absorption value 32-38
325 mesh residues% â?¤0.1
PH value 6-7
Mohs scale 5-6
Heating loss % â?¤ 0.10
High activity agent for concrete N90
TOPFILL® N90 is a new type of reinforcing material, its main component is modified Silica.
The particle size distribution is 60nm~500nm, the aggregate structure is a single sphere, with irregular groove surface and relatively lower structure.
The smallest structural unit is spherical. With extremely low surface activity, structural units could not be agglomerated.
The smallest structural unit has uneven surface, with certain reinforcing performance.
Nano grade structural unit has a very low degree of structure. Good dispersion in rubber, with addition amount increasing the rolling resistance of tread rubber decreased.
Packaging & Delivery
Packaging Details
25KG/PER BAG OR PER CUSTOMER'S REQUIREMENT
Delivery Time
15-20 days
Chemical Name: Amorphous Silica
Product Name: Topfine® N98
Topfine N98 is an amorphous (non-crystalline) silicon dioxide consisting of perfectly spherical primary particles (150 nm mean dia). It is inert, non-toxic and eco-friendly. It will not decompose even in a fire.
TOPFINE® N98 is readily dispersed in, and compatible to most thermoplastics elastomers.
Flame retardancy: TOPFINE®N98 is a flame retardant synergist that improves the char strength and makes the flame retardant additives (ATH, MDH, ATO, APP, etc) work more efficiently, allowing a reduction in the addition level of the flame retardants. It can replace 30% ATO without flame retardent effect changing.
Rheology: TOPFINE®N98 acts like ??sub-micron ball bearings?�, reducing the torque in mixing (saving energy and may allow a higher filler loading). It can reduce the buildup of plate out by lowering the friction against the tooling in an extruder (better and a more uniform flow and better surface). The ??ball bearing effect?� also helps to disperse inorganic fillers and additives, making the compounds more homogenous.
Dynamic fatigue: TOPFINE®N98 shows excellent fatigue resistance, brings longer service life, brings lower risk of failure, increasing more than 50% property of fatigueresistance.
Application:
Topfine®N98 has been designed for usage in thermoplastics, TEP, ABS, dark rubber etc, for flame retardant and fatigue resistance requirement.
TOPFILL MB-2
TOPFILL MB-2 is Aluminosilicate, good dispersion, the high covering power, high whiteness, good suspension, good chemical stability, good plasticity, good light scattering and insulation.
It can improve the absorbability, weather resistance, durability, scrub resistance, corrosion resistance and high temperature resistance of the coatings, improve the mechanical properties, increase the transparency, improve the fire resistance, can be used in anticorrosion, fire resistance, high temperature resistance, powder, building coatings, Reflective and heat-insulating coatings and various industrial and civil coatings, especially suitable for high-light semi-light coatings and other capacitors. It can replace titanium dioxide partially, eliminate the phenomenon of light flocculation caused by titanium dioxide, and prevent the paint from yellowing.
Application
1. Civil building coatings: improve the adsorbability, weather resistance, durability, scrub resistance, corrosion resistance and high temperature resistance of coatings, can replace part of titanium dioxide, eliminate the phenomenon of photoflocculation caused by titanium dioxide, and prevent paint from yellowing, epecially to water-based coatings. It can greatly reduce the production costs.
2. Solid industrial coatings: reduce VOC, improve high temperature resistance, improve hardness and scrub resistance, control gloss, increase wear resistance, spray ability, reduce cost;
3. Solvent industrial topcoat, electrophoretic paint: increase solid content, reduce film permeability, enhance corrosion resistance, hardness, inertia, wear resistance, control gloss, reduce costs;
4. Maintenance coatings: chemical resistance and corrosion resistance, durability, wear resistance, low coating permeability, high addition and low cost;
5. Powder coating: improve fluidity, hardness, wear resistance, control gloss, good handle, reduce cost;
6. Coil steel coating: flexibility, corrosion resistance, luster control, higher solid content, reduce costs;
7. Primer: improve salt spray performance, high temperature resistance and chemical resistance, increase solid content, reduce cost;
8. Reflective and thermal insulation coatings: Prominent performance when used for decorative reflective heat insulation coatings.
Application
CR,F,CPE,CSM Rubber,Paper filler ,oil paint,Steel ball polishing agent
Leather treating agent,glue agent,glass reinforced plastic agent.
MgO,%,â?¥ ï¼?92.0 94.0 90.0 96.0 ï¼?Four kinds of purityï¼?
Size,um,â?¤ 150 150 150 3.0
According to the value of iodine absorption, magnesium is divided into three types: high activity, medium activity and low activity. The iodine value is 120-180, 50-80 and 19-43mgl2 respectively.
We provide high activity magnesium oxide, select raw materials through seawater method, control calcining temperature to control the activity of magnesia, low impurity content and high purity.
Low Zinc active nano zinc oxide masterbatch
European Commission has confirmed the EU-wide ban on the use of zinc oxide at medicinal levels in piglet feed in 2017, EU 2017/1413 Regulation made further limit on zinc oxide in cosmetics, in 2016, California Senate Bill 1260 even tried to ban the sale of motor vehicle tires in California that contained more than a certain amount of zinc by weight. To follow this tread, we have developed Low-Zinc Activator Topfine® CR510, it has the characteristics of low zinc content, high vulcanization activity and excellent dispersion. Zinc content is only half of common Zinc Oxide (ZnO), which is environmentally friendly, and meets the requirements of rubber products performance.
Low Zinc active nano zinc oxide masterbatch
European Commission has confirmed the EU-wide ban on the use of zinc oxide at medicinal levels in piglet feed in 2017, EU 2017/1413 Regulation made further limit on zinc oxide in cosmetics, in 2016, California Senate Bill 1260 even tried to ban the sale of motor vehicle tires in California that contained more than a certain amount of zinc by weight. To follow this tread, we have developed Low-Zinc Activator Topfine® CR510, it has the characteristics of low zinc content, high vulcanization activity and excellent dispersion. Zinc content is only half of common Zinc Oxide (ZnO), which is environmentally friendly, and meets the requirements of rubber products performance.
Activator Topfine® CR510 is prepared by means of liquid phase reaction, which is obtained by reaction under specific temperature and PH conditions, also obtained under dehydration process and granulation technology.
PRODUCT HIGHLIGHTS
High activation efficiency
Nanometer grade dispersion, no agglomeration
Good dispersity of processing, no dust
Excellent physical properties (comparing with equivalent ZnO indirect Process), can replace ZnO-80 Masterbatch equivalently)
Environmentally friendly, Zinc content 40%
Effectively increase the scorching time, improve the processing safety, the vulcanization speed faster than that of the common zinc oxide.
Low content of heavy metal, passed SGS test, meet RoHS standard
CR510
Pre-Dispersed Polymer Bound Chemicals
function
Metal Oxide
A homogeneous mixture of Zinc Oxide and polymeric binder system at 80/20 ratio
The elastomer bound form of CR510 ensure better physical properties and surface quality for extrusion profiles than powder form.The vulcanizates will obtain higher modulus and tensile strength,prevents scorch in chloroprene rubber compounds .
Dosage
3 - 8 Phr
Packaging
25 kgs in carton box with polyethylene bag liner or Valve pocket
Storage
Keep cool (below 25 ) and dry in original package.24 months from production date
characteristic
It can replace ZNO80 very well with low zinc , ECO-friendly.
PRODUCT HIGHLIGHTS
High activation efficiency
Nanometer grade dispersion, no agglomeration
Good dispersity of processing, no dust
Excellent physical properties (comparing with equivalent ZnO indirect Process), can replace ZnO-80 Masterbatch equivalently)
Environmentally friendly, Zinc content 40%
Effectively increase the scorching time, improve the processing safety, the vulcanization speed faster than that of the common zinc oxide.
Low content of heavy metal, passed SGS test, meet RoHS standard
European Commission has confirmed the EU-wide ban on the use of zinc oxide at medicinal levels in piglet feed in 2017, EU 2017/1413 Regulation made further limit on zinc oxide in cosmetics, in 2016, California Senate Bill 1260 even tried to ban the sale of motor vehicle tires in California that contained more than a certain amount of zinc by weight. To follow this tread, we have developed Low-Zinc Activator Topfine® CR510, it has the characteristics of low zinc content, high vulcanization activity and excellent dispersion. Zinc content is only half of common Zinc Oxide (ZnO), which is environmentally friendly, and meets the requirements of rubber products performance.
Activator Topfine® CR510 is prepared by means of liquid phase reaction, which is obtained by reaction under specific temperature and PH conditions, also obtained under dehydration process and granulation technology.
CR510
Pre-Dispersed Polymer Bound Chemicals
function
Metal Oxide
A homogeneous mixture of Zinc Oxide and polymeric binder system at 80/20 ratio
The elastomer bound form of CR510 ensure better physical properties and surface quality for extrusion profiles than powder form.The vulcanizates will obtain higher modulus and tensile strength,prevents scorch in chloroprene rubber compounds .
Dosage
3 - 8 Phr
Packaging
25 kgs in carton box with polyethylene bag liner or Valve pocket
Storage
Keep cool (below 25) and dry in original package.24 months from production date
characteristic
It can replace ZNO80 very well with low zinc , ECO-friendly.
Low Zinc active nano zinc oxide masterbatch
European Commission has confirmed the EU-wide ban on the use of zinc oxide at medicinal levels in piglet feed in 2017, EU 2017/1413 Regulation made further limit on zinc oxide in cosmetics, in 2016, California Senate Bill 1260 even tried to ban the sale of motor vehicle tires in California that contained more than a certain amount of zinc by weight. To follow this tread, we have developed Low-Zinc Activator Topfine® CR510, it has the characteristics of low zinc content, high vulcanization activity and excellent dispersion. Zinc content is only half of common Zinc Oxide (ZnO), which is environmentally friendly, and meets the requirements of rubber products performance.
Modified Metallic Dimethacrylate
Toplink 439 is a difunctional solid dimethacrylate for general applications requiring enhanced adhesion and scorch retarding.
Toplink 439 is recommended for use in peroxide cured systems for coatings and formulations requiring enhanced adhesion.
Product Introduction
The Benefits of Using Toplink 439
1.Contains non-nitroso inhibitor package for scorch resistance
2.High crosslink density
3.Improves metal adhesion
4.Better elongation, better heat resistance, high tear strength
5.Low Zinc
Item ZnDMA
NAME ZINC DIMETHACRYLATE
CAS 13189-00-9
MF C8H10O4Zn
Ash(%) 30-36%
Moisture(%) 0.8
Product Details
Low Zinc active nano zinc oxide masterbatch
European Commission has confirmed the EU-wide ban on the use of zinc oxide at medicinal levels in piglet feed in 2017, EU 2017/1413 Regulation made further limit on zinc oxide in cosmetics, in 2016, California Senate Bill 1260 even tried to ban the sale of motor vehicle tires in California that contained more than a certain amount of zinc by weight. To follow this tread, we have developed Low-Zinc Activator Topfine® CR510, it has the characteristics of low zinc content, high vulcanization activity and excellent dispersion. Zinc content is only half of common Zinc Oxide (ZnO), which is environmentally friendly, and meets the requirements of rubber products performance.
