Penetration Grade Comments
40 - 50 Hardest grade.
60 - 70 Typical grades used in the U.S.
85 - 100
120 - 150
200 - 300 Softest grade. Used for cold climates such as northern Canada
Penetration Grade Bitumen Specification (AASHTO M 20 and ASTM D 946)
Units 40/50 60/70 80/100 100/120 Test Methods
Specific Gravity @25 C - 1.01-1.06 1.01-1.06 1.01-1.05 1.01-1.04 ASTM D-70
Penetration @25 C, 100gm, 5sec 0.1MM 40-50 60-70 80-100 100-120 ASTM D-5
Softening Point, Ring & Ball C 52-60 49-56 45-52 42-49 ASTM D-36
Ductility @25 C, after TFOT, Min CM 100 100 100 100 ASTM D-113
Loss on Heating, Max %Wt 0.2 0.2 0.5 0.5 ASTM D-6
Drop in Penetration after Heating, Max % 20.0 20.0 20.0 20.0 ASTM D-6 & D-5
Flash Point Cleveland open cup, Min C 250.0 250.0 232.0 250.0 ASTM D-92
Solubility in CS2, Min %Wt 99.5 99.5 99.5 99.5 ASTM D-4
Organic Matter Insoluble in CS2, Max %Wt 0.5 0.5 0.5 0.5 ASTM D-4
Sport Test - Negative Negative Negative Negative *A.A.S.H.O.T.102
Viscosity Grade
Standard Grading based on Original Asphalt (AC) Grading based on Aged Residue (AR)
AASHTO M 226 AC-2.5 AC-5 AC-10 AC-20 AC-30 AC-40 AR-10 AR-20 AR-40 AR-80 AR-160
ASTM D 3381 AC-2.5 AC-5 AC-10 AC-20 AC-30 AC-40 AR-1000 AR-2000 AR-4000 AR-8000 AR-16000
Standard Grades Minimum of Absolute Viscosity, Poise@ 600�°C Approximate penetration grade
IS73:2013 VG 10 800 80-100
VG 20 1600 -
VG 30 2400 60-70
VG 40 3200 30-40/40-50
Viscocity grade over penetration grade several key issues are addressed, like:
Viscosity Grade Bitumen Specification (IS 73:2013)
Property Units VG-10 VG-20 VG-30 VG-40 Test Methods
Penetration at 25�°C, 100g, 5sec, Min 0.1MM 80 60 45 35 IS 1203
Absolute viscosity at 60�°C P 800-1200 1600-2400 2400-3600 3200-4800 IS 1206 (Part 2)
Kinematic viscosity at 135�°C, Min cSt 250 300 350 400 IS 1206 (Part 3)
Flash point (Cleveland open cup), Min �°C 220 220 220 220 IS 1448 [P : 69]
Solubility in trichloroethylene, Min %Wt 99 99 99 99 IS 1216
Softening point (R&B), Min �°C 40 45 47 50 IS 1205
Tests on residue from thin film oven test:
- Viscosity ratio at 60�°C, Max 4 4 4 4 IS 1206 (Part 2)
- Ductility at 25�°C, Min CM 75 50 40 25 IS 1208
Typical Properties of Each Base Oil Group
Group  Group Group Ultra-S 4,6,8 Group
Saturates, % 65~85 93~99+ 95~99+ 99+ 99+
Aromatics, % 15~35 <1~7 <1~5 <1 <1
Sulfur, ppm 300~3000 5~300 0~30 <1 n/a
Viscosity @ 100 , cSt 4~32 4~30 4~8 4.0~7.6 4~70
Viscosity Index(VI) 95~105 95~118 123~150 120~135 125~150
Pour point, -15 -15 -15 -22.5 ~ -15 -45
SPECIFICATIONS
Parameters
1SWL - 92 Result (%)
1SWL - 90 Result (%)
1SWL - 85 Result (%)
1RL Result (%)
Loss on lgnihon
13.80
13.86
12.80
12.24
Sllica as SiO
43.03
42.03
45.70
47.53
Alumina as AlO
39.37
39.50
36.80
34.74
lron as FeO
0.36
0.89
0.94
1.26
Titania as TiO
0.78
0.94
1.08
1.32
Calcium as CaO
0.56
0.56
0.56
0.56
Magnesium as MgO
0.81
1.01
1.00
1.00
Sodium as NaO
0.27
0.30
0.28
0.29
Potassium as KO
Less than .10
Less than .10
Less than .10
0.14
Fired Color > Lab (At 1210â??C60 Min)
L*94.83 A*0.46 B*3.10
L*92.63 A*0.91 B*3.05
L*90.88 A*0.96 B*3.60
L*85.67 A*1.74 B*6.33
Whiteness
87.50%
83.49%
80.00%
68.20%
2) price of Product
the price depends on Quality
3) Product of Origin - India
4) Hs Code - 25070010
5) MOQ - 50 Metric Tons
6) Packing - Loose Bulk (Vessel load ), Break Bulk (1 MT Jumbo Bags, 50 kgs, 100 Kgs HDP bags)
Industrial Salt
Sr. No. Parameter Unit Specification
1 Sodium Chloride (NaCl) % min 96.00%
(on wet basis)
2 Calcium (Ca) % max 0.05%
3 Magnesium (Mg) % max 0.03%
4 Sulphate (SO4) % max 0.15%
5 Insoluble % max 0.03%
6 Moisture(H2O) % max 3.00%
7 Calcium / Magnesium ratio (Ca/Mg) ratio More than 1.5
Note: specifications mentioned above are on a wet basis.
Standard and Test Methods IS 797 - 1982
Test
Result
Purity (On Dry Basis) (Wt%)Min
99.98
ASH Content (Wt %) Max
0.05
Moisture (Wt %) Max.
0.50
Hydrocarbons (Wt %) Max.
0.05
Organic (wt %) MAX.
0.02
Color
Yellow
Mean Size
2-7 MM
Size Distribution
2-7 mm > 90%
less than 2 mm 10% Max
more than 6 mm 10% Ma
PRILLED UREA
Property
Units
Limits
Test Methods
N 2 Content
Wt%
Min 46
BS DIN EN 15478
Biuret Content
Wt%
Max 1.0
BS DIN EN 15479
Moisture
Wt%
Max 0.3
ISO 760
Particle size (1-2.4mm)
%
Min 90
ISO 8397
Urea Formaldhide(UF)
%
Max 0.4
H.F.T 1.6 & SBB 0071-02-E
