Product IntroductionÂ
Wood briquette machine is the main production equipment charcoal molding equipment, mainly wood chips, sawdust, rice husk, peanut shells, plant stalks and other carbonaceous wood materials, without any binder, after high temperature, high pressure process , Extruded into a solid rod with a central hole.
Rod machine with automatic thermostat device, at a set temperature performance and stability, and has a reasonable structure, small size, small footprint, labor-saving, energy saving and easy operation and maintenance advantages. The solid bar produced by the machine is more flammable and has higher heat (more than 20% higher than that of common wood) after carbonization. It has small pollution when burned and is easy to store and transport in large proportion. It can make full use of crops and forest waste, Waste as treasure.
 Raw material
The source of raw materials is rich, almost any biomass material can be briquetted.
Working principle
Using the intrinsic attributes of the wood material, by spiral extruding under high temperature and pressure, wood element in wood material becomes plastic and makes the fine fiber combine, and at last stick solid plank fuel is formed.
Main parts
1. Forming of tube, special casting steel, inner barrel boron treatment,continuously use for more than 5Â months.
2. Heating ring: the material is stainless steel; on the molding tube for heating, so that the raw materials in the shape of conducive to shrinkage, easy to shape.
3. Propeller,advanced design,high speed of producing rod ,high density,high resistance to wear,one welding time can work continuously for more than 30 hours.
Advantage
1. Increase the pitch to increase the amount of feed, a substantial increase in output.
2. With electric heating temperature control system to ensure the formation of stable discharge, improve work efficiency.
3. Optimization of the structure of the tube, reducing the friction between the mechanical and raw materials, an increase of the density of the stick.
4. Product bar shape and size of the selective, to meet different customer requirements.
Product Introduction
Hydraulic oil press machine is the use of international quality steel and international standard engineering hydraulic technology, effectively increase the service life of equipment and fully automated use of the effect. The use of low-temperature press technology to ensure that the traditional flavor and characteristics of refined oil. With small size, low noise, low energy consumption, high oil rate, long service life and other characteristics.Hydraulic press operating procedure is simple and fast, can be directly added to the raw material into the oil tank squeezed out of the pure fragrance fragrance without oil.
Raw material
Oil press machine can be widely squeezed peanuts, soybeans, rapeseed, sesame seeds, sunflower, flaxseed, camellia seed, cottonseed, pepper seeds, walnut, tung seed, castor, almonds and other oil crops.
Structural
1. Design science, reasonable structure, easy operation, safe and stable, from the feeding to the finished product once completed only a few minutes2.The machine is small, small footprint, low power consumption.3. The machine belongs to the hydraulic machinery, with high pressure, the oil rate is high, squeezed out of oil flavor, high-quality clean and so on.4. Combination of high and low manual pump, the pressure on the fast, labor intensity is small.5. National quality standard high-carbon steel and components, durable.
Advantage
Hydraulic oil press pure physical press, do not destroy the organic ingredients of oil, oil quality is better.
Product Introduction
Hammer-type wood crusheris currently the most widely used wood production mill, the series is absorbed in avariety of wood mill on the merits of the development of advanced fine crushing equipment. With high productivity, low energy consumption, crushing effect is good, crushing uniform, simple operation and easy maintenance. At the same time the device is equipped with dust suction device, small powder pollution, in line with environmental requirements.
Raw material
The range of raw materials for wood crushers is quite is quite wide, and awide variety of waste wood raw materials can be used for crushing,such as twigs, branches, bamboo, sawdust, etc., and can also be used for bamboo, thatch, corn stalks, sorghum Stalk and other fiber-like material of the chip.Wood crushers because of its internal structure, crushed the finished product size is very uniform, there is no greater difference in particle size.
Working principle
The machine uses impact crushing method, the use of internal high-speed operation of the hammer and the fixed ring gear around the relative movement, the material by the hammer collision, friction, get smashed each other. Crushed good material by rotating centrifugal force through the sieve screening into the capture bag.
Advantage
1.Hammer crusher with less investment, low energy consumption, high productivity, good economic returns, easy to use and maintenance advantages.
2.Hammer crusher sawdust particle size after crushing small, obvious wood fiber, the material evenly, the quality of finished wood products, low processing costs.
Product Introduction
Ring die pellet machine is specially designed for mass industrial production of wood pellets.It is a full set of mechanized production equipment. It can convert biomass raw material and solid waste into energy fuel with high density.wood pellet mill is suitable for various kinds of materials whose moisture content is less than 15%.The machine is fully automatic electric heating, and can adjust the humidity of materials to deal with problems of congestion and not forming.
Raw material
Raw materials from a wide range of eucalyptus, pine, fruit trees and other wood waste, wheat, soybean meal, corn, rice husk and other crop straw, sawdust, sawdust and other materials.
Working principle
When the ring-die pellet machine is in operation, the material rotates into the material cavity through the feeding port, and the centrifugal force causes the material to continuously circularly move and adhere to the inner wall of the stamper to form a uniform annular material layer, Constantly rotate the extrusion, making it forced into the ring hole in the molding, and continue to squeeze outwards, gradually by the dial to promote the particles out of the discharge port.
Advantage
1. Die legislation, vertical frequency feed, to prevent uneven feeding.
2. The host drive using high-precision gear drive to enhance the wear resistance of gear, particle machine running more smoothly.
3. Double mold, a variety of aperture to meet user requirements of various granulation.
4. Spindle and Siamese hollow shaft made of high quality alloy steel, a substantial increase in wear resistance.
5. Particle molding system bearings are used high-quality silent bearings, longer service life, safer operation.
6 .Automatic timing oil lubrication system to ensure adequate lubrication bearings, more safe and reliable operation.
Product IntroductionÂ
The whole machine with delivery, into Material, pressure plate, broken one linkage control. In addition can be customized according to customer requirements of various types of wood processing equipment.
Synthetic crusher crushed product size similar to the matchbox, but also can adjust the size of the material according to the size of the material, but because of raw materials, are used thickened screen, so the size of the finished product is generally 2-8 cm, belonging to broken wood equipment.
 Raw material
Comprehensive crusher is a professional crusher used to crush the waste template on the site, bamboo plywood, wood-based panels, plywood and other wood crushing equipment, Machinable width of 1.5 meters, the thickness of 1-30 cm of wood and other scraps.
Working principle
Comprehensive crusher structure is more complex, the use of hammer broken principle, in front of conveyor belt feeding, feeding port feeder, which has the first crushing system, except the nail system, the second crushing system, exhaust dust system , From the feed to the discharge of the size of the motor in this process a total of seven, belonging to the automatic with a nail removal system crusher.
Structural
1, Feed delivery: to be placed plate to be broken wood;
2, Feed roller: feed speed control and keep the plate does not slip and no feed situation;
3, Spiral crusher roll: evenly distributed in the circumferential direction of the roller welding cutter, crushing roller to ensure that the moment in the circumferential direction of the same force;
4, The template is broken with the feed and broken synchronization, to achieve uniform crushing;
5, The feed roller adopts UCK series bearing plus spring compression mechanism, which can be adapted to the different thickness of the plate;
6, feed roller and crushing roller using different power system, easy to control
 resistance to wear,one welding time can work continuously for more than 30 hours.
Advantage
1, engaging blade, the material completely broken;
2, the choice of special blades, blade hardness is high;
3, strong structure, dense reinforcement plate to ensure the strong box;
4, automatic button control, safe and convenient;
5, safety signs and safety labels to ensure the safety of use;
Product Introduction
Garden cutting machine is a set of slices, crushed as one of the crusher, is a branch of garden pruning branch specializing in the production of mobile devices, mainly used for crushing wood into small pieces, crushed raw materials of uniform size and good quality. The device can be equipped with motor or diesel engine according to user requirements.
The machine is not only used in landscaping, urban afforestation, fruit tree planting and other fields, but also widely used in furniture factories, wood products and fungus farmers use venues.
Raw material
The scope of the use of garden tree shredder : trimming under the trunk, leaves, branches, straw can also use this equipment for crushing treatment.
Working principle
Garden cutting machine with hydraulic compulsory feeding, the loose twigs forced into the crushing chamber, the blades are constantly rotating high-speed cutting, the finished product discharged from the discharge port.
Advantage
1. High-speed alloy blade, sharp and durable, stable cutting.
2. Simple structure, durable.
3. Simple operation, high efficiency.
4. Wide range of applications, high safety performance.
5. Easy to move and maintain
