FATIH SERIE DVR-M3H
FULL AUTOMATIC SERVO DYNAMIC VOLTAGE REGULATOR
DVR-M3H 250KVA THREE PHASE
The DVR-M3H Regulator provides the following:
-Protection of the user from negative voltages.
-Protection of the user and the device from excessive current.
-Undisturbed pure sinus voltage regulation.
-Long-term overload protection and short-term protection.
-AC voltage balancing with extremely high accuracy.
-Run smoothly on all loads from 0% to 100%.
-Manual transfer to bypass regime without regulating.
-Display all values against the probabilities in the bypass regime.
-Record mains input voltage limits and load current values.
-Static, not gradual, dynamically correct output voltage too quickly without user notice.
-When protections are activated, record the number of protection trips and the reason for each parameter separately.
-Generation as standard is 0.4% (379.87V - 382.6V) stable when the input voltage is within the range of 112.6V ..... 537V.
TECHNICAL SPECIFICATIONS
INPUT
Input Voltage Correction Range :190-415 / 275-450 / 310/485 VAC
Input Voltage Operating Range : >155v�490v<
Operating Frequency : >47.....64 <
Input Protection : Overcurrent. Low and High Voltage Protection (Optional)
OUTPUT
Output Voltage : >380v�415v< +/- %0,4
Overload :10 SECOND % 200 load
Correction Speed / Recovery Speed : - 90 Volt / S (150-250VAC the range)
Output waveform : Pure Sine
Output protection : Overcurrent. Low and High Voltage Protection (Optional)
Output protection at low voltage : 337V on - 303V off
Output protection at high voltage : 424v on ... 433 off
OPERATING PRINCIPLES : Servo Motor - Microprocessor - Dynamic Servo
GENERAL
Cooling : Smart fan system (Thermostat)
Measurement and imaging : Input and Output Voltage Led Display / Input, Output Voltage and Ampere Led Display MULTIMETER
Continuous operating time at full load : 0..105%.
Continuous load 96%
Mechanical By-pass : Manual control network / 1-0-2 Pako Switch / Remote Switch / Lock key On / Off
Protection Class : IP20 and Other Options
Fully Automatic Static Voltage Regulator
1 PHASE / 3kVA
Our SVR-G-HOME series static voltage regulators, which are designed in accordance with the standards of electrical appliances, have been designed as an AC mains voltage compensator with the ergonomic design to compensate the voltage from the mains and bring it to a nominal value of 220 volts. It is a single-phase electronic device designed to provide balanced AC voltage for any consumer. Unlimited, the device works with all kinds of power-appropriate load. Home, office equipment, power tools, electric motors,air conditioners, refrigerators, glass machines etc.
The design of the device is suitable for use on a vertical table or hanging on a wall. There is a control panel on the front cover of the device to monitor the parameters. 3 buttons, 12 LEDs and 1pcs 4x20 LCD display are used in the control panel. There are two circuit breakers ,one 16A socket on the right side, and a cooling fan grill on the left side. 4 rubber feet are attached to the bottom of the device for comfortable use on the table. Two mounting holes on the back cover allow hanging on the wall. In order to avoid any problem in the devices with neutral sensitivity, the "neutral transit" or "common neutral" scheme is used. To remove interference from the mains, a EMI filter is used at the output of the device. The terminal socket is designed on the back cover of the device for connecting input output and ground power lines. Thanks to 16 static steps, the device makes the necessary voltage adjustment. When the temperature inside the device reaches + 55 ° C, the cooling fan switches on automatically.
Detailed information about the product;
GALATA SERIE DVR-M3H
Full Automatic Servo Dynamic Voltage Regulator
DVR-M3 150KVA THREE PHASE
The DVR-M3H Regulator provides the following:
-Protection of the user from negative voltages.
-Protection of the user and the device from excessive current.
-Undisturbed pure sinus voltage regulation.
-Long-term overload protection and short-term protection.
-AC voltage balancing with extremely high accuracy.
-Run smoothly on all loads from 0% to 100%.
-Manual transfer to bypass regime without regulating.
-Display all values against the probabilities in the bypass regime.
-Record mains input voltage limits and load current values.
-Static, not gradual, dynamically correct output voltage too quickly without user notice.
-When protections are activated, record the number of protection trips and the reason for each parameter separately.
-Generation as standard is 0.4% (379.87V - 382.6V) stable when the input voltage is within the range of 112.6V ..... 537V.
TECHNICAL SPECIFICATIONS
INPUT
Input Voltage Correction Range :190-415 / 275-450 / 310/485 VAC
Input Voltage Operating Range : >155v...490v<
Operating Frequency : >47.....64 <
Input Protection : Overcurrent. Low and High Voltage Protection (Optional)
OUTPUT
Output Voltage : >380v...415v< +/- %0,4
Overload :10 SECOND % 200 load
Correction Speed / Recovery Speed : - 90 Volt / S (150-250VAC the range)
Output waveform : Pure Sine
Output protection : Overcurrent. Low and High Voltage Protection (Optional)
Output protection at low voltage : 337V on - 303V off
Output protection at high voltage : 424v on ... 433 off
OPERATING PRINCIPLES : Servo Motor - Microprocessor - Dynamic Servo
GENERAL
Cooling : Smart fan system (Thermostat)
Measurement and imaging : Input and Output Voltage Led Display / Input, Output Voltage and Ampere Led Display MULTIMETER
Continuous operating time at full load : 0..105%.
Continuous load 96%
Mechanical By-pass : Manual control network / 1-0-2 Pako Switch / Remote Switch / Lock key On / Off
Protection Class : IP20 and Other Options
FULL AUTOMATIC SERVO DYNAMIC VOLTAGE REGULATOR CONTROLLED BY Wi-Fi
1kVA - 50 kVA
The DVR-M1 Wi-Fi Regulator provides the following:
Undisturbed pure sinus voltage regulation.
AC voltage balancing with extremely high
accuracy.
Producing intensely, keeping the output
voltage stable within ± 0.4% (219.2v -
220.8v) while the input voltage is
between 65v ... 310v.
Run smoothly on all loads from 0% to 100%.
Long-term overload protection and short-
term protection.
When protections are activated, record the number of protection trips and the reason for each parameter
separately.
Record mains input voltage limits and load current values.
Protection of the user from negative voltages.
Protection of the user and the device from excessive current.
Static, not gradual, dynamically correct output voltage too quickly without user notice.
Display all values against the probabilities in the bypass regime.
Manual transfer to bypass regime without regulating.
Control system by Wi-Fi network.
http://en.guvenisregulator.com.tr/userfiles/files/DVR-M1%20WI-FI%20EN.pdf
SINGLE PHASE VARIAC TESTER BOX 0,5-15KVA
It allows to set the desired voltage automatically by manual or servo motor in the setting range determined according to customer request.
The variac, which is contained therein, is formed by winding a single envelope enamelled copper wire on toroidal sheet.
The variac provides all the load that provides power and voltage regulation. Using the MSC-7203 multimeter mounted on the variac box, the input voltage, the output voltage and the drawn amperage can be seen instantaneously. In addition, the MSC-7203 multimeter automatically records the highest and lowest values of the instantaneous values and can reset it as desired.
â?¢ Optionally : the controle module â??â??MSC-7203 + Wi-Fi â??â?? is available.
-Record the highest and lowest values seen
-Resetting information
-Input output voltage and amperage calibration
-Voltage range from 0 to 300 Volt
-Born terminal or socket outlet
-Simple operation with plug-in cable
-Breaker for protection
-High efficiency, quiet operation
-Manual or automatic setting
-Good quality, ergonomic construction, easy carrying devices
-Production in ISO 9001: 2008 and CE Standards.
Three phase transformers are used on three phase energy systems either as security - isolation type transformer or step up -down transformer, in some cases step-up and step down transformers can be produces as auto transformer for reducing the price.
Nominal power
Isolation type or auto type
Input-output voltage and current values according to duty factor
Input - output connection types ( delta - star etc )
Galvanic isolation
Input - output voltage steps
Input-output connection materials
Isolation class
Metal enclosure and ventilation
Mounting type ( horizontal - vertical ) ... Etc
Guven-is determines these technical specifications by communicating directly to the customer before designing process in order to avoid any problem. When every detail is clear a sample transformer is produced and tested by guven-is and submitted to the customer for the final approving before the ordering.
Http://en.Guvenisregulator.Com.Tr/userfiles/files/3%20phase%20transformer%20eng(1).Pdf
