We are specialized in designing and building various steel floor plate decking roll forming machines,such as close-type steel floor deck roll forming machine,3-waves steel deck floor roll forming machine,2-waves with ribs steel floor deck roll forming machine etc. In modern time,people prefers to use steel instead of stone or cement for construction projects,such as the steel floor decks, because it is more convenient to fill the concrete into the steel floor deckings than to use the stone floor.
Technical Data for Main Parts on decking floor steel sheets roll forming machine:
Uncoiler: Manual Uncoiler
Thickness of Material: 0.7mm-1.2mm
Effective Width:600-900mm
Coil Weight: 5 Tons
Coil OD:1500mm
Coil ID:508--610mm
Feeding Guide OF STEEL FLOOR DECKING ROLL FORMING MACHINE:
2 Rollers to guide the material into the machine
Both ends of the flat roll adopt bearing structure.
Roll Forming Machine (STEEL DECK FLOOR ROLL FORMING MACHINE)
Roller Stations: 28-36 stations
Diameter of Shaft: 70mm
Material of Shaft: 45# steel.
Material of roller: 45#steel with electroplating treatment after quenching treatment.
Forming speed: 8-12m/min
Siding Plate: 36 [H" Steel (Thickness 18mm).
Transmission: 1.0" Chains-bracket.
Bearing Model: 6210
Main Power: 2x11KW;
Overall Dimensions: 11500mmx1500mmx1300mm
Weight of the machine: Appro.14 Tons
Color steel roll panel is the color coating steel plate and the roller of cold bending into various wave types of pressure plate. It is used in industrial and civil building, warehouse, construction, large span steel structure housing roof, walls, and internal and external wall decoration, is a lightweight, high strength, color rich affluence, convenient and quick construction, earthquake, fire, rain, long service life, maintenance free characteristics, has been widely applied.
main roll forming machine
Forming steps: as requirements
Shaft diameter: 80 mm
Design type : middle Plate
Roller material: 45 # steel chrome plating chromium
Shaft material: 40Cr steel
Work speed: 4-12m/min
Transport: by chain
Type of cutting : hydraulic
Cutting tolerance: 1mm
Cutter: Gcr12
Working pressure: 40MPA
Zhongtuo automatic high speed interchangeable ceiling t grid roll forming machine could be used to make Main T and cross T.
Main T: equiped with inverter motor, producing in line speed: 30M per minute. Hydraulic automatic punching and cutting machine linked with main forming machine,punching and cutting automatically. Two heads and middle holes are punched and cut-off at the same time after forming.
Cross T: equiped with both inverter and servo motor producing in line speed: 30M per minute. Main machine with constant speed,it is traced by the servo trace system, automatic tracing the speed of the main machine, punching and cutting automatically. Two heads and middle hole are punched and cut-off at the same time after forming.
some technical parameters of ceiling t grid roll forming machine
Decoiler
Usage: It is used to support the steel coil and uncoil it in a turntable way. Passive uncoil pulled by roll forming system
Loading capacity: 3T
Uncoiling width: 500mm
Inner diameter: 450-550mm
Main roll forming machine:
Feeding and flatting will make sure the steel is neat clean and straight.
Roller fixer : Guide column
Frame : middle plate welded Memorial arch frame type
Drive mode: gear
Diameter of shafts: Ï?40mm
Shearing machine:
Power supply : hydraulic power
Frame : Pillar style with rack & pinion system
Stroke switch : non-contact photoelectric switch
Electic Control System:
1. Adopted PLC, transducer, touch panel from Delta Taiwan to ensure high speed with stability, precision and lifetime.
2.Other electric element are Delta
3. Equipped with movable switch, air break, radiator, transformer & electric leakage protector for operation convenience and safety.
This kind of T grid roll forming machine is fully automatic. It can do punching and cutting automaticly. The final products can be
packed directly.
Steel floor deck roll forming is one of the heavy machine types, products are widely used in power plants, power equipment companies, automobile exhibition hall, steel structure plant, cement warehouse, steel office, airport terminal, railway station, sports venues, concert halls, large supermarkets and other steel structures.
As our experience for the steel floor deck roll forming, here we recommend the 720 type steel deck floor roll forming machine.
The specification for steel floor deck roll forming:
Machine type: steel deck floor roll forming machine
Material: galvanized steel
Material thickness: 0.8-1.2mm
Roll station: 24 stations
Roll shaft diameter: 90mm
Roller material: Cr15
Driving power: 22kw
Driving way: by Chains
My company
Cangzhou zhongtuo roll forming machine Co.,Ltd have more than 16 years to produce various kinds of cold roll forming machine, For example the steel roof wall panel roll forming machine, glazed tile roll forming machine, corrugated sheet roll forming machine, CZ purling roll forming machine, light steel keel roll forming machine, highway guardraill roll forming machine and other cold roll forming machines. We always focus on the high quality machine and provide you the good price.
My service
We can give you the warranty for two years, our technicial team and after sale service group will greatly decrease the trouble for customers.
My payment:
TT/LC/OA/DP
The archaistic tile sheet is rolled and pressed by modular glazed roll forming machine,it has many features,such as good appearance,primitive simiplicity and elegance,unique style,noblest grade,and etc. It is widely used in garden style factories,scenic resorts,pavilions,hotels,villas,exhibition halls,country clubs,and so on for outdoor decorations.
tile roll forming machine consists of uncoiler and its base,infeed guides,fixed position driven forming stations,pressing die,shearing device,hydraulic station,PLC control console and so on.Our company has dozens of profile models for this series roll forming machine,We can design different kinds of profile and fittings for machine,as per customers' requirement.
The finished products of floor decking sheet roll forming machine are metal floor deck.They have many features, such as simple shape, large wave height, high intensity and good adhesiveness.In the high story building, it not only can save steel mould board, but also reduce the bearing of the floor.
In order to protect the products shape and precision , floor decking sheet roll forming machine takes use of the welded frame structure chain drive transmission. The shaft diameter is 90 mm, 25 roller stations. Forming speed can be 8-10m/min. The main power is 2*11kw. All kinds of embossing are ok.
Cutting device of floor tiles making machine adopts hydraulic power.The blade is made up with g12 steel quenching treatment .Best quality hydraulic driving, automatically cutting after forming, without deformation and with operations security.
The coil width of this Top Roofing Ridge Cap Roll Forming Machine is usually from 300-550mm. The thickness of Top Roofing Ridge Cap Forming Machine is between 0.25-08mm.It can continuous form the steel sheet according to customer`s requirement, automatically cut to length. This equipment has many advantages, just like light weight, high forming speed,low noise, stable transmission, easy operation, good look and so on.
The shutter door machine is used to make the shutter door slats for making the steel curving doors. the shutter door machine including below parts:
the decoiler, the leveling, the roll forming machine and the receiving table.
please check below new finished shutter door machine lines.
there are single shutter door machine and double production line shutter door machines too.
that is to say, you can design the machines in one table, and you can design the machines in double table, with other profiles together.
Brief Introduction:Roofing Sheet Roll Forming Machine
Double roofing sheet roll forming machine is also called double layer roll forming machine or double layer machine.It is a kind of machine which have two production lines for the roof sheet, the upper layer is one line, and the under layer is another line.But the layers or two lines can not product at the same time. Compared with two sets single layer machine, it can save space,money,just with one electric control desk and one hydraulic station, so it is easy to do the maintenance for workers.
Usage of the roof sheet
The roof sheet made by the double layer machine can be widely used in Industrial and civil buildings, warehouse, special construction, large span steel structure house as the roof, walls or interior and exterior decoration. Its thickness is from 0.3 mm to 0.8 mm,width can be 914 mm,1000 mm,1200 mm,1220 mm,1250 mm. This is the common and standard sizes. You can also give your requests about the sizes , we can make and design the machine as per your special requests on sizes.
Composition of those two layer (you can choose)
Trapezoidal + trapezoidal
Corrugated + trapezoidal
Glazed + trapezoidal
Features:
1. Lower noise, easy to operate
2. Design as customers` request
3. Controlled by PLC
4. Can also provide materials
General introduction about Steel Slitting Machine
Steel Slitting Machine is also called Slitting line machine.Slitting line machine can do uncoiling, slitting and recoiling works, make coil steel to any desired width coil steel. It mainly includes coil car, uncoiler, coil guide, slitting machine, scrap winder, tension unit, recoiler and coil car, hydraulic system, Etc. It mainly used in cold or hot rolled, galvanized iron,PPGI,stainless steel,carbon steel, silicon steel and all the other kinds of metal materials with surface spreading.This line can be adjusted to do recoiling or dividing work to meet customer`s demand.
Features of Steel Slitting Machine
1.tidy recoiling
2.convenient to operate
3.accurate precision of shearing
4. professional design and good to use
Parameter of steel Slitting Machine
Raw material: steel
Thickness: 0.5--2.5mm
Width: 900-1250mm
Inner diameter: 508mmmm
Max out diameter: 1600mm
Max weight: 6T
Width tolerance: 0.5mm
Min slitting width: 60mm
Main Specification
1.The frame:350# I steel and U steel welding
2.The materail of mold:Cr12 steel with quenched treated 60-62â??
3.Hydraulic power:3Kw
4.Dimension:4m*0.5*2.5m
5.weight:2T
Warranty
1. One year, and we will provide the technical support for the whole life.
2.Training: the buyer should charge of visa, return ticket, food and accommodation overseas and USD50/person/day for salary.
3. Need one technicians
4. Training time: one week (contains the time of installation and adjustment)
The glazed tile machine is mainly to make roofing panels. This is the model type for sri lanka country, a beautiful one. The feeding coil width is 914mm and output width is 760mm. The raw material normally use the color coated steel coil, the thickness can be 0.4-0.8mm.
The glazed tile machine is high precision and good productivity. It needs 1-2 persons to handle the machine.
Plc control the machine, make the machine become more easily.
The cutting system can make the cut automatically with plc control.
The whole work process is high safety level.
Payment:
30% by tt in advance, and balance before shipment.
Meanwhile, we accept the lc, dp and oa.
To expand our business, our government give us so much support,
One of the important is the payment terms.
As most of factories only can accept tt, sure it's very easy and convenient for they both.
But there are some countries can not make the payment by tt, like algeria, bangladesh and ethiopia.
They only can make lc or dp and our advantage is that we can accept both, especially the 100% lc.
Meanwhile, some customers have the problem for usd dollars, or they can not pay a big amount one time.
For this matter, we can make it by oa to solve this problem.
Also, oa lc dp payment terms can be a guarantee for customers. From our side, we have 100% confidence for our products and customers.
-
Door frame and window frame are the two mainly product for the structures. The raw material is galvanized and thickness will be up to 1mm. The whole production line will need the punching process. The punching make make the top and ends for the installation. The punching machine can be prepared by the buyer or order from my company with the roll forming machine.
window frame roll forming machine
door frame making machine
frame C profile forming machine
Shutter Door Sheet is widely used in the shop, hotel , bank etc building, Because it is easy open and closed , Also very easy to install, For fit this market, we manufactured the Rolling Shutter Door Equipment.
What make our shutter door machine different with others
1. For making the perfect shape rolling shutter door panel, we manufactured the shutter door roll forming machine with the flying saw cutter.
2. We add more embossing rollers for making different types.
3. High speed rolling forming.
4. Good quality and good material of rollers, supported testing data from laboratory.
For making the rolling shutter door panel with punching holes for more light and wind:
1.Based on the old production line, you need only add one more punching machine.
2.The holes sizes could be changed.
3.The punching holes could be removed or with as you wish, it will not effect the machine working effect.
For Rolling Shutter Door Equipment parameters and more information for your reference:
Main roll forming machine system:
a. Number of forming steps: 26 stations
B. Shaft material: 45# steel with quenched treatment, precision machined,
The diameter: ï¿ 60mm
c. Roller material: Cr12 Mov with quenched treatment
d.Transport: by gear
e. Forming speed: 25m/min
f. Motor: 18.5 kw
g. Voltage: 380v, 50Hz,3 phase or customize
h. Structure: independent stand
i. Size of machine: 4.5m *0.8m *1.2m
Flying Shearing system:
The material of blade: Cr12Mov,
Hardening HRC 58-6
Length Tolerance:3m±1.0mm
Hydraulic station:
Hydraulic motor Power: 3kw
Hydraulic oil: 46#
Hydraulic pressure: 12 Mpa
Brand: Chinese famous brand.
Components: The system includes a set of hydraulic tank, a set of hydraulic oil pump, and two hydraulic pipes. And two sets of electromagnetism valves.
We can make two waves, three waves for highway guardrail/fence application
Production Standard: JT/T 281-2007, JT/T 457-2007
Raw material: Q235A galvanized steel sheet
Steel guardrails provide a visual and physical barrier between traffic and work areas. It is used for protection against accidents due to lift trucks or other mobile equipment in dock areas, aisles, around special equipment, or offices. Reduce costly damage to equipment and inventory. Modular system is easily expanded or moved as needed. For indoor or outdoor use.
Based on the above drawing profile, we make machine parameter like the following:
1. Suitable material: Q235A galvanized steel, width: 440mm, thickness 3.0mm
2. Forming speed: 10-12M/min
3. Forming roller station: 20 stands
4. Leveling roller station, 7 stands
5. Guiding and feeding roller, 4 stands
6. Roller material: Gcr 15 bearing steel after treatment, HRC58-60
7. Roller shaft material: No.45 high grade material after treatment
8. Roller shaft dimension: 100mm
9. Main motor power: 45 KW
10. Transmission: by gearbox
11. Leveling rollers motor power: 2.2KW
12. Hydraulic motor power: 11kw, hydraulic pressure: 20Mpa
Best Machine can make the best finished product to protect road against impact:
Poorly designed machine makes lower quality finished products. The guardrail terminal ends will lead to penetration of errant verticals, which could be extremely dangerous. So for the machine design, we are quite seriously.
This hydraulic arch camber curving machine makes small fine curve for designated performed roof panel. Such curving panel saves roof purlins and steel -friend and lowest cost coating. Moreover the curving roof is strong and durable, looks beautiful and fashionable as well
Double layer roofing roll forming machine could be used to make two different metal roofing sheets without changing any rollers or cutting die because there are two sets of rollers in this machine. The double layer roll forming machine could be totally different type's sheet combination, it is equal to two sets machines. But from some degree, double layer machine takes small space in the factory.
But the double layer cat not be used to make two different type roofing sheet at the same time as only one layer working one time. As the two layers using the same motor, plc control system, same machine frame and some shearing control system.
Half Automatic Flat T bar roll forming machine is the machine to make ceiling T bar by roll forming principle. Half automatic machine means that you need to punch the holes and ends of the flat T bar. Same as other T bar, flat t bar also has main T and cross T two types. Normally the T bar sizes 32x24x3600mm; 38x24x3600mm 38x35x3600mm; 32x15x3600mm etc.
Simple and brief introduction of half automatic T bar roll forming machine:
NO.ItemBrief introduction
1Frame tableMaterial: Carbon Steel, Thickness: 20mm, Polished, Anti-rusting processing
2RollerMaterial Cr12 Inner diameter 40mm, Min OD 90mm, Hardness HRC 55-56, Symmetry in the range of 0.05mm, 16 roller stations
3TransmissionChain Drive or Gear
4StitchFour Rollers real stitch can also be used for fake stitch.
5Side PlateThickness 30mm, Polish 6 sides, high precision boring
6Principal axis45# steel, tempering heat treatment, mill grinder precise making
7Electronic control systemPLC programmed, Touch Screen, full automatic controlling system.
8Stamping MouldsMaterial D2, Hardness HRC 58-60, Precise milled, precise making, easy to removable parts.
Advantages of Zhongtuo Half Automatic Flat T bar roll forming machine:
Full automatic production to make the T gird shape. For the finished ending making and punching hole, needs another punching machine.
Machine working speed is around 25meter per minutes and speed is adjustable.
Hydraulic punching for anti slip holes and the company logo if you need.
Hydraulic shearing and servo flying system.
The product punching die and cutting off blade, we use SKD11 as material, long time to use.
PLC control system, Human-Machine interface, portable and touch screen. The brand of PLC is Panasonic.
Shutter door slat roll forming machine according to our knowledage there are serval types: European style shutter door machine, Australia style shutter door machine, shutter door with big holes, shutter door with perforation holes machine, shutter door U stud forming machine and others. No matter which type is made by the following process:decoilerâ?? sutomatic punching â??feeder guide â??roll formingâ?? flying cutting saw â??run out table.
Mian roll forming machine parameters for your reference:
a. Number of forming steps: 12 stations
B. Shaft material: 45# steel with quenched treatment, precision machined,
The diameter: 50mm
c. Roller material: Cr15Mov with quenched treatment
d.Transport: by gear
e. Forming speed: 8-10m/min
f. Motor: 4kw
g. Voltage: 380v, 50Hz,3 phase
h. Structure: independent stand
For the shearing system, we have two options for your reference. The first one is flying cutting saw, shearing can keep perfect shape of the shutter door. For the second one, hydraulic shearing, it has perfect shearing end, the shearing end is smooth, no burr like the above pictures I showed above.
Why choose ZT Shutter door slat machine?
1.Pillar stand frame to make sure machine working steady, easy to adjust and repair in the further.
2.High quality elements like PLC, motor and others. They can make sure machine working long time.
3.Gear transmission to make sure working fast and steady.
4.Two options of shearing system. Meanwhile based on flying cutting saw, we have our new design to make sure shearing fast and no burr.
Related profiles roll forming machines for rolling shutter door system
Roll forming machine for production of galvanised steel rolling shutter door profiles, including the shutter slat, side guides (track), boxes profiles, rolling tubes, etc.
Steel framing ceiling batten is a quality product that benefits from a combination of high strength and rigidity with low weight and cost. It is compatible with all major domestic ceiling boards, which makes our Ceiling Batten an economical, easy to use and versatile system. Our Steel framing ceiling batten roll forming machine can produce economical light weight steel framing roof batten with high speed.
Features of steel framing ceiling batten:
The return edge is folded back on itself, providing a safe edge and a rigid profile.
0.42mm thick hi-tensile steel is very strong, light weight and is easy to cut with tin snips.
The 20mm high profile provides strength and is designed to nest for easy handling and storage.
A cavity on the bottom prolongs the batten's life by preventing condensation from forming.
A textured surface makes installation easy when locating and screwing plasterboard fixings.
Our Ceiling Battens are supplied in 6100mm lengths for easy handling and storage.
Main parameters of the steel framing ceiling batten roll forming machine:
Size: 43008001400Weight t: 2.2tons
Voltage:380V/50HZ3Phase(as customer's request)
Roller fixer : Guide column
Frame : middle plate welded
Memorial arch frame typeFrame thickness:25mm
Drive mode: gear
Material of rollers: GCr12MoV
Material of shafts: 45# steel with tempering
Diameter of shafts: Ï?40mm
Number of rollers :11 rollers
Main power: 3kw
Steel framing roof batten roll forming machine can produce economical light weight steel framing roof batten with high speed. It features rolled edges for safe handling and a knurled top for extra grip. For more details, please check the followings.
Features of steel framing roof batten:
Steel framing roof batten are versatile and easy to use. They can be lapped, eliminating the need for on-site cutting, which makes them quick and easy to install. They are compatible with all pierce fix domestic roofing profiles and are fixed to the rafters with screws or nails through each flange. The roof is fixed to the battens with self-drilling screws.
1.A textured surface makes installation easy when fixing the cladding.
2.0.55mm thick hi-tensile steel is very strong, light weight and easy to cut with tin snips.
3.The 40mm high profile provides strength and is designed to nest for easy handling and storage.
4.Each Flange has a groove for easy fixing location.
5.The return edge provides safety and rigidity.
6.Available in stock lengths with mitred ends for easy installation at hips and valleys.
Parameters of main steel framing roof batten roll forming machine
Size: 4300Ñ?800Ñ?1400Weight t: 2.2tons
Voltage:380V/50HZ3Phase(as customer's request)
Roller fixer : Guide column
Frame : middle plate welded
Memorial arch frame type
Frame thickness:25mm
Drive mode: gear
Material of rollers: GCr12MoV
Material of shafts: 45# steel with tempering
Diameter of shafts: Ï?60mm
Number of rollers :13 rollers
Main power: 3kw
The U shutter side channel making machines are specially designed to manufacture high quality side channel for rolling shutters. These machines have heavy duty structures and optimum design with easy operations. We specialize in making all types and sizes of side channel machines and also customized ones as per client`s need.
The Machine's parts are all made with precision and experienced personals, with optimum quality roll tools so you never have to worry about the quality.
The drawing profile and finished product of shutter side channel
Normally speaking, the material thickness is around 0.8 to 1.2 mm. And the input coil width is around 180 to 220 mm. According to different shutter slat there are different shutter side channels.
Features of shutter side channel
Durable
High strength
Seamless finish
The advantage of rolling shutter side channel making machine
1.Produce different purlin size without changing rollers and spacers.
2.No need changing cutter for different size
3.Easy operation, low maintenance cost
4.Infinite sizing(any size within machine range), help to save material
5.Optional punch hole at any position of purlin web side and flange side
Ceiling grit forming machine roll forming machine
Usage: in order to keep the product shape and precision, adopts welded sheet structure, motor reducer drive, gear transmission, roller surfaces polishing, hard plating , heat treatment and galvanize treatment . The polished surface and the heat treatment towards the molds also can keep the molding plate surface smooth and not easy to be marked when it is being stamped.
Size of main part: about 5.5*1.4*1.5m (l*w*h)
Weight of main part: 4.5tons
Main power: 5.5kw
Voltage: 380v/50hz/3phase
Frame type: memorial arch frame
Frame thickness: 25mm
Drive mode: by gear
Material of rollers: gcr12mov
Material of shafts: 45, steel with tempering
Diameter of shafts: 40mm
Number of rollers: 11 rollers
Material: gi/ppgi
Material thickness: 0.3-0.6 mm
Forming speed: 25 meter/minute
Combined two line ceiling channel light gauge steel stud roll forming machine also called two line stud and track roll forming machine.It can produce two keels. If the dimension is suitable, our technicians can simplify the two rollers into one. Combined ceiling channel roll forming machine can help you to save space and raise productivity.
To our great joy,we have already developed three lines ceiling channel light gauge steel stud roll forming machine.
Advantages of combined two line ceiling channel light gauge steel stud roll forming machine
1.PLC Control
You can add in-Line Printing, and PC-Controller Software allowing you to lable components and control your combined two line ceiling channel light gauge steel stud roll forming machine from your computer. Each option may be included with your machine or added later as your needs evolve
2.Holes (embossing, logo punching)
All combined two line ceiling channel light gauge steel stud roll forming machines can be set-up with a Service Hole, Dimple Punch, Index/Bolt Hole and Web-notch tools.
3.high speed
Servo driven punch provides close tolerance accuracy and none stop punching for increased production, with interchangeable tooling for different hole sizes and shapes.
Application of combined light keel roll forming machine ceiling strut channel machine
Combined two line ceiling channel light gauge steel stud roll forming machine is one type of ceiling channel roll forming machine.According to different shape, it also has C shape, U shape ,Omega shape (or hat shape) and T-bar.They all belong to light steel truss.Light steel truss is a kind of new construction material. Along with the development of world's modern construction, more and more buildings are using the truss in recent years, such as hotels, flight terminals, stations, museums, theatres, cinemas, shopping malls, factories, office buildings, home decorating and garages.
EPS& Rock Wool Sandwich Panel Making Machine including unwinding, before cutting, film, beading / molding, rock wool and spray delivery, Edge foam, continuous curing, cutting and other functions, high degree of automation, stable performance.Edge polyurethane foam systems, automatic feeding system, to ensure that the raw material requirements in full accordance with the ratio of mixing, spray evenly; using a reliable foam technology to ensure uniform sheet foam, dense, sheet closely connected.The production line is equipped with automaticcontrol system, userfriendly interface for easy operation, monitoring, advanced computer control, easy to adjust the entire line of argument, effectively ensure the production line stable and efficient operation.
EPS&rockwool sandwich board production line production Process:
(The upper)Dncoiler ---Cutting ---Film---Beading---Roll forming --Rock wool delivery--Glue--Sealing side foam-- laminating machine with Foam,Solidify,Roll forming--Cutting --Run-out table
(Lower part)Uncoiler ---Cutting FilmBeadingRoll forming
The double layer metal roof sheet roll forming machine perfectly combines the two types of equipment with reasonable structure, beautiful appearance and space saving. The electric control system uses a button to change the automatic control conversion of the upper and lower layers, and the operation is simple and practical. Let us know more detail information about the machine in the followings.
The main technical parameters of double layer metal roof sheet roll forming machine
1 . Machine size9500mm1900mm1600mm
2 . The roller steps: 13/14
3 . Material of roller45#steel
4 . Diameter of shaft: 70mm
5 . Material of cutterCr12
6 . Working speed: 10-15 m/min.
7 . Control systemPLC
8 . Power of main motor 4KW
9 . Power of hydraulic station4KW
10.Material thickness0.3-0.8mm
11.Input coil width1250mm
Italy design rolling shutter guardrail rolling forming machine could be used to make shutter guardrail in batch fully automatic. The guardrail design is from italy, when used together with the seal, it can remove noise when shutter moving. Vertical guides are formed from rolled steel or fabricated dependent on size and are supplied with appropriate angles for fixing to the structure.
Parameters of italy design rolling shutter guardrail rolling forming machine:
A. Number of forming steps: 26 stations
B. Shaft material: 45# steel with quenched treatment, precision machined, the diameter: ï¿ 50mm
C. Roller material: cr12 mov with quenched treatment
D.Transport: by gear
E. Forming speed: 25m/min
F . Motor: 18.5 kw
G. Voltage: 380v, 50hz, 3 phase or customize
H. Structure: independent stand
I. Size of machine: 4.5m *0.8m *1.2m
How to use rolling shutter guardrail:
The rolling shutter guradrails length could be made according to the door height. In the plc of machine, you can make any length shearing .
Glazed tile roofing roll forming machine main roll forming system:
Usage: in order to keep the product shape and precision, adopts welded sheet structure, motor reducer drive, chain transmission, roller was chromed which can keep the molding plate surface smooth and not easy to be marked when it is being stamped.
Length of the main part: about 650014501500
Weight of main part: 3.8 tons
Voltage: 380v 50hz 3 phase
Roller fixer: middle plate
Frame: 350 h steel welded
Drive mode: chain
Material of rollers:45# steel, surface hard chromium plating.
Material of shafts: 45# steel
Diameter of shafts: ï?80mm
Number of rollers: 13 rollers
Main power: 5.5kw
ZT-75 to 600 fully automatic cable tray rolling machine produce d by us, is used for producing cable trays that are used in different kind of factories and buildings. We offering you to Cable Tray Machine that comprise of efficient Punching Press, Hydraulic Press, Electric Control penel and many other Equipment, which make it an ideal option for many. The Cable Tray Roll Forming Machine can Manufacring a both superiority and quantity cable trays in less time.The ZT-75 to 600 fully automatic cable tray rolling machine is composed by the following elements: hydraulic decoiler, leveling system, punching machine,coil feeder, mian rolling forming machine and receiving table.
Zhongtuo cable tray roll forming machine is composed by the following elements:
de-coiler
Parameter: width of material: 225-1020mm thickness: 1-2mm;
Inner diameter of coil: Ï?508mm;inner expansion range: Ñ?480-520 mm;
The maximal of Diameter: Ï?1500mm; The Maximal of loading: â?¤5T
Motor power: 5.5kw frequency change control
Press material type: pneumatic press material
Feeding speed: 0-15m/min, adjustable
Leveling machine of fully automatic cable tray rolling machine
A: working roller: nine rollers type leveling machine
B: Feature of structure: after the quenching and tempering, chrome-plating processing, the rigidity, surface roughness of the roller etc. are all enhance greatly; It is composed by the clamping roller and the leveling roller, the clamping roller may the independent control, the leveler has one pair of horizontal guide roller and two pairs of vertical guider roller and easy to adjust by hand wheel. Between the leveler and the feeding device, there is optical sensor, sends out the feedback signal to the control system, the control system sends out the instruction to the frequency conversion motor to change speed, Achieves the uninterrupted level goal.
servo feeding machine
A: function: material feeding
b. Feature: Uses the servo motor-driven .Multistage type feeding: May input 10 group of different feeding lengths. The liquid crystal touching screen demonstrated is advantageous for the change, establishes various technical parameters. The auto-induction start system and the punch press linkage (control punch press start).
Punching press of
Model of punching press: JF21-120B
Roll forming part
Forming station: 14sets
Forming variety: bridge frame
The diameter of the roller axis: ï¿ 85mm
Hydraulic cutting
Cutting type: hydraulic cutting
Blade type: close type die cavity cutter
Hydraulic power:5.5kw
Material of blade: Cr12, quench treatment, hardness HRC56-58
Quantity: 9 (depend on customer request)
Run-out table
Zhongtuo is a dedicated roll-forming facility equipped with modern machinery to perform the job needed for tomorrow's landscape. Run by a team of highly trained prodution executives, the state-of-the-art facility produces an extensive range of precision-cut steel roof purlin. Fo the steel roof purlin roll forming machine, i will introduce more information to you starting from the drawing profile.
Range of products and services
1.Hot dipped galvanized high Tensile Steel C and Z steel roof purlin
2.Section sizes from 80 mm- 300 mm
3.Based metal thickness from 1.5 mm- 3 mm
4.Bridging pieces
5.Design calculation based on BS5950 part 5 and Eurocode
Parameters of steel roof purlin roll forming machine
Forming steps: 16 rollers
Shaft diameter: 90 mm
Design type: Middle plate welded
Machine frame: 400# H steel welded
Roller material: Gcr12 steel
Shaft material: 40 CR
Working speed: 15 m/min
Transport: by chain
Power of main machine: 18.5 kw
Type of cutting: hydraulic
Cutter: Cr12
Working pressure: 20 Mpa
Applications of c and z steel roof purlin
At zhongtuo, we understand the liberal designs of architects and engineers. Our c and z steel roof purlin are roll-formed and precision-cut for multitude of uses that includes, but is not limited to.
1.Structural supports
2.Single bay buildings
3.Recessed roofs and walls
4.Tower structures
5.End walls
6.Interior supports of multi-bay buildings
Stud and track roll forming machine could be used to make single stud, single track or combine track and stud by one machine. The sizes could be customized according to customer requirements. And meanwhile one machine could be used to make many types of the sizes and shapes. Our Stud and track roll forming machine also allows you to press logo, punching company name or print date you need on the finished products.
The Stud and track roll forming machine is composed by the following elements: Decoiler, leveling beach, roll forming machine, shearing system, punching unit and runout table.
Here is some brief introduction of each element:
1.Decoiler
Usage: It is used to support the steel coil and uncoil it in a turntable way. Passive uncoil pulled by roll forming system
Loading capacity: 1.5T
Uncoiling width: 300mm
Inner diameter: 450-550mm
2.Feeding and leveling
This part will level coil to make sure it is neat clean and straight. Meanwhile the roller will punch dots at both side of the C channel.
3.Main roll forming machine
It takes design as pillar style, Memorial arch frame type and the material thickness is around 25mm. Driving mode by gear, the roller material is GCr12MoV. And the shaft we will use 45# steel with tempering in the diameter of 50mm. Normally we will use 12 roller stations to make the perfect shape of the stud and track.
4.Pressing logo and shearing system.
Punching logo and shearing will be done within one unit. For the shearing, in order to enhance working speed, we will use flying track and cutting saw system.
Material of blades: Gcr12 quenched
Power supply: hydraulic power
Frame: Pillar style with rack & pinion system
Stroke switch: non-contact photoelectric switch
5. Electric Control System
1. Adopted PLC, transducer, touch panel from Delta Taiwan to ensure high speed with stability, precision and lifetime.
2. Other electric element is Delta
3. Equipped with movable switch, air break, radiator, transformer & electric leakage protector for operation convenience and safety.
Installation:
Stud and track either could be used for ceiling participation and drywall participation. Here is one picture about the ceiling participation.
