Exporter of all types and sizes of Stainless Steel, Mild Steel Duly Hot Dip & Aluminum Cable Trays & Accessories
Exporter of all types and sizes of Gaskets.
Product Details:
Size 1/2 inch
Full Coupling, Half Coupling & Reducing Coupling
Range:
Socket Weld: 1/2 to 2 “upto 9000#
2.5" to 4" - 3000#
Screwed: 1/2 to 4 “upto 6000#
List of Specifications:
ANSI/ASME B16.11 Forged- Fittings, Socket Welding & Threading.
1. ANSI B1.20.1 Pipe Threads, General Purpose
2. ASTM A105, A182, A234, A350, A262, A153.
Exporter of all types of IBR certified or NON-IBR Valves & Strainers as per client specifications
Exporter of all kinds of Lube Oil & Grease.
Exporter of of all types and sizes of Electrical Insulating Mat as per IS "CPRI / ERDA".
Exporter of all types and sizes of Fasteners.
Pneumatic Control Valves
- This is a IBR approved in line FLOW CHECK VALVES for use in any application Water, Condensate, Liquid etc.
- Ensure that there is no reverse flow in the line.
- Maximum pressure 47.5 kg/cm2 at 105°c.
- Material ASTM A 315 Gr. CF8M (SS 316).
- Easy installation, fits between flanges joint in any class.
- Sizes available 15 NB to 100 NB, large size available on request.
- Valve must be fitted with the direction of flow being according to the direction arrow indicated on the body of the valve.
Sizes Available : 15 NB, 20 NB, 25 NB, 40 NB & 50 NB. Class 800
Options : IBR OR Non - IBR.
Material : Forged Steel Body With SS Internals
End Connections : Screwed BSPT
Socket Weld
Butt Weld
Max. Temperature : 427o C
Max. Pressure 139 kg / cm2
Three way valve which design for diverting or mixing service applications. A diverting service valve takes common stream and splits it into two outlet force, this configuration is used for applications such as level control and pump bypass control valve.
Mixing service valve combines two fluid streams and discharges the mixed fluid to a common outlet ports this configuration is used for applications where two fluids need to be mixed the end result can range from temperature control to producing a new fluid.
Three way valve actually performs of two opposite acting standard two way valves. So that use of one valve instead of two is very economical.
Valves are available with hand wheel if required.
Size : 15 NB to 300 NB
Rating : IBR approved ANSI Class 150, 300 , 600 , 900 , 1500 & higher on request
Body Materials : Carbon Steel (A216 Gr WCB) / Alloy Steel (A217 Gr WC6) / SS (CF 8M)
Leakage Class : ANSI B 16.104 CL IV
Range Ability : 40 : 1
Our pressure relief safety valve is designed as a pop up type valve. On exceeding set pressure the valve opens to discharge the excess built up pressure.
After relieving excess pressure, the valve automatically returns to the original position. The bronze internals (Seat & Plug) ensure that there is no leakage while in operation.
By replacing only the spring it is possible to change set pressure range.
Sizes Available : 15 NB, 20 NB, 25 NB, 40 NB, 50 NB
End Connections : Screwed BSP
IBR Certificate : Available For IBR Applications
Soft-Seating : Also Available For Air Application
Maximum Operating Temperature : 235° C
Available Range : Min. Blow Off Pressure 0.35 Kg/Cm2 Max. Blow Off Pressure 17.5 Kg / Cm2
PRDS Valves ( Combined Pressure Reducing Cum Desuperheating Valves )
Features :
Our combine PRDS valve is a single seated globe type valve that combines pressure & temperature reduction in one compact solution. The high pressure, high temperature steam which enters the main branch, is reduced in pressure and then spray water is injected immediately after pressure reduction.
The high velocity and turbulent flow conditions data present immediately following the pressure reduction allow for rapid atomization and absorption of the spray water thus effectively desuperheating the steam.
Reduction of noise level due to mist formation by water is an added advantage.
Size : 15 NB to 300 NB
Rating : IBR approved ANSI Class 150, 300 , 600 , 900 , 1500 & higher on request.
Body Materials : Carbon Steel (A216 Gr WCB) / Alloy Steel (A21? Gr WC6) / 55 (CF 8M)
Leakage Class : ANSI B 16.104 CL IV
Range Ability : 40 : 1
Sizes Available : 15 NB, 20 NB, 25 NB, 40 NB & 50 NB. Class 800
Options : IBR OR Non - IBR.
Material : Forged Steel Body With SS Internals
End Connections : Screwed BSPT
Socket Weld
Butt Weld
Max. Temperature : 427o C
Max. Pressure 139 kg / cm2
Exporter of of all types and sizes of IBR certified or Non-IBR Flexible Hoses as per Client Specification & Design.
Features:
We are your single source for stations complete with piping and instrumentation. Our stations are supplied complete and ready to fit on your piping. We have a station to suit every need.
Our steam pressure reducing stations are pre-fabricated manufactured ready to install units for steam system management. The pre-assembled steam pressure reducing stations are individually sized to meet end-user's specific needs inlet and outlet piping & valve are sized as per best engineering practices. Each unit is custom engineered and designed to meet specific system requirements.
All upstream & downstream pipe work & fittings are adequately sized to ensure that only the required pressure drop occurs across the control valve itself.
Easy for maintenance
Size: 15 NB x 15 NB to 300 NB x 500 NB and higher size as per requirement
Rating: IBR approved ANSI Class 150, 300, 600, 900, 1500 & higher on request.
MOC: Carbon Steel (A216 GrWCB) / Alloy Steel (A217 GrWC6) / 55 (CF8M)
End connections: Flanged & Butt Weld
Options: IBR / Non IBR
Product Details:
Size 1/2 inch, 3/4 inch, 1 inch, 2 inch
Range:
Socket Weld : 1/2 to 1.25 " upto 9000#
2" upto 6000#
Screwed : 1/2 to 1.5" upto 6000#
2" upto 3000#
List of Specifications :
1. ANSI/ASME B16.11 Forged- Fittings, Socket Welding & Threading.
2. ANSI B1.20.1 Pipe Threads, General Purpose
3. ASTM A105, A182, A234, A350, A262, A153.
Product Details:
Size 1/4 inch, 3/4 inch, 1 inch, 2 inch
Range :
Socket Weld : 1/2 to 2 " upto 9000#
3" - 3000
Screwed : 1/2 to 2.5" upto 6000#
3" upto 3000
List of Specifications :
1. ANSI/ASME B16.11 Forged- Fittings, Socket Welding & Threading.
2. ANSI B1.20.1 Pipe Threads, General Purpose
3. ASTM A105, A182, A234, A350, A262, A153.
Product Details:
Size 1/2 inch, 3/4 inch, 1 inch, 2 inch
Range :
Socket Weld : 1/2 to 2 " upto 6000#
3" - 3000#
Screwed : 1/2 to 2 " upto 6000#
3" - 3000#
List of Specifications :
1. ANSI/ASME B16.11 Forged- Fittings, Socket Welding & Threading.
2. BS 3799 Steel Pipe fittings, Screwed & Socket Welding for the petroleum industry.
3. ANSI B1.20.1 Pipe Threads, General Purpose
4. ASTM A105, A182, A234, A350, A262, A153.
Product Details:
Size 1/2 inch, 3/4 inch, 1 inch, 2 inch
Forged Union
Range :
Socket Weld : 1/2 to 2 " upto 6000#
3" - 3000#
Screwed : 1/2 to 2 " upto 6000#
3" - 3000#
List of Specifications :
1. ANSI/ASME B16.11 Forged- Fittings, Socket Welding & Threading.
2. BS 3799 Steel Pipe fittings, Screwed & Socket Welding for the petroleum industry.
3. ANSI B1.20.1 Pipe Threads, General Purpose
4. ASTM A105, A182, A234, A350, A262, A153.
Product Details:
Size 1/2 inch, 3/4 inch, 1 inch, 2 inch
Range & Specifications :
Socket Weld : 1/2 to 2 " upto 9000#
3" - 3000#
Screwed : 1/2 to 2 1/2' upto 6000#
3" upto 3000#
List of Specifications :
1. ANSI/ASME B16.11 Forged- Fittings, Socket Welding & Threading.
2. ANSI B1.20.1 Pipe Threads, General Purpose
3. ASTM A105, A182, A234, A350, A262, A153.
Stainless Steel Hoses and Hose Assemblies
Stainless steel corrugated flexible hoses are offered from 6mm (1/4’) to 300 mm (12’). The annular corrugated hose body provides the flexibility and pressure tight core of the assembly.
Lance Hoses
An import substitute product, developed and manufactured by us. These hoses distinguish themselves due to their good performance in adverse and hostile conditions.
These ultrasonically cleaned and degreased hoses are pressure sealed, leak proof under vacuum condition and can be used with or without inside interlocked liner.
Advantages of Flexible Metal Hose
- Suitable for wide temperature range (-270°C to700°C).
- Compensates for thermal expansion contraction in the piping system.
- High physical strength.
- Fire resistant.
- Moisture resistant.
- Longer life.
- Good corrosion characteristics.
- Resistant to abrasion, penetration and damage.
- Connects misaligned rigid piping absorbs or dampens vibration and similar equipment.
- A flexible and quick option for rigid piping in difficult locations.
The fitting are available in Mild Steel, Carbon Steel, Stainless Steel, Brass, Gun Metal, Rolled bronze. Flange connection with fixed & floating flanges to meet IS, DIN, ANSI* ASA standards or as per customer's specification.
Product Details:
Size 1/2 inch, 3/4 inch, 1 inch, 2 inch, 3 inch
Range & Specifications :
Socket Weld : 1/2 to 2 " upto 9000#
3" - 3000#
Screwed : 1/2 to 2 1/2' upto 6000#
3" upto 3000#
List of Specifications :
1. ANSI/ASME B16.11 Forged- Fittings, Socket Welding & Threading.
2. ANSI B1.20.1 Pipe Threads, General Purpose
3. ASTM A105, A182, A234, A350, A262, A153.
Product Details:
Size 1/2 inch, 3/4 inch, 1 inch, 2 inch
Forged Nipples
Range :
Socket Weld : 1/2 to 4 " upto XXS/6000#
Screwed : 1/2 to 4" upto 6000#
List of Specifications :
1. ANSI/ASME B16.11 Forged- Fittings, Socket Welding & Threading.
2. ANSI/ASME B16.9 Factory- Made Wrought Steel Butt Welding fittings.
3. BS 3799 Steel Pipe fittings, Screwed & Socket Welding for the petroleum industry.
4. ANSI B1.20.1 Pipe Threads, General Purpose
5. ASTM A105, A182, A234, A350, A106, A335, A262, A312, A153.
DESCRIPTION:
Commercial rubber sheet used for gasket & packing purpose in industrial applications. These sheets / rolls are made from Prime polymer blended with reclaim rubber. As it is cured using compression moulding & rotary drum curing system available in smooth & cloth impression finish with or without choice of insertion.
APPLICATIONS:
This commercial rubber sheets / rolls are mainly used for flange gasket packing to avoid leakages from air, water & inorganic chemicals, machinery packing pads, anti vibration pads & flooring purpose.
PROPERTY:
Good resistance to inorganic chemicals, water, air & heat up to 70°C. Poor resistance to Ozone, UV, Sunlight, oil & solvents & organic chemicals. Boron Rubbers India has custom designed this rubber to meet many applications on several different levels while maintaining a very economical basis for a rubber sheets / rolls.
COLOR: Black
No GRADES DENSITY (g/cc) HARDNESS (SH–A) TENSILE (Kg/cm2) Elongation (%)
1 BRZ – 1560 1.50 70 25 200
2 BRZ – 1665 1.60 65 20 175
3 BRZ – 1870 1.80 60 15 150
PRODUCT DIMENSIONS
Rotocure Finish Plate Finish
SIZE (Mtrs) THICKNESS (MM)
1.2 x 10, 20, 30 3 to 12
Finish Smooth / Texture Impression
SIZE (Mtrs) THICKNESS (MM)
1.2 x 2.4 3 to 25
1.0 x 2.0 3 to 25
MANUFACTURING TOLERANCES
THICKNESS WIDTH LENGTH HARDNESS DENSITY
+ / - 0.3mm or 10% whichever is higher + / - 2% + / - 5% + / - 5 + / - 0.05
STORAGE OF PRODUCTS
Do not expose rubber sheet to direct sunlight, sheets away from heat source, preferably in dark, air ventilated room will help give longer life & optimum properties
Do not remove polythene packing before use to prevent it from exposure of atmospheric oxygen, ozone & polluted air. Do not store rubber sheet rolls in open, even after covering it with tarpaulin to protect from air & rain. Always keep rolls in vertical position ONLY
Keep rolls away from solvent, oil & fuel storage. Do not use hooks while loading/unloading the rolls. Inspect sheet for smooth surface & hardness (with rubber hardness tester).
DESCRIPTION:
NR / SBR blend rubber sheets / rolls are used in the commercial and industrial applications. This specifically designed rubber material is long-¬lasting that is suitable for operational use which provides excellent mechanical properties like high resilience, low compression set, high resistance to cut, tear & abrasion & also offers resistance to many acids, alkalis & salts. The operation temperature range is (-¬20°C to +80°C). It is available in wide range of hardness from 40 Shore A to 80 Shore A. It has very good physical properties like Tensile strength, wear & tears properties, Abrasion resistance.
APPLICATIONS:
NR / SBR Rubber sheets / rolls are used for wide range of applications like skirt board, bridge bearing, gasket for high pressure packing, heavy weight machinery packing, Para-¬quality for sand/shot blasting machinery & used as shock absorber. NR / SBR Rubber sheets/rolls can be used as shelf liner; workstation table liner and work area rubber lining that can with and moderate chemicals & alkaline solutions. These sheets can also be used for anti-abrasion lining for material handling machinery in mines alike industries
PROPERTY:
Excellent resistance to inorganic chemicals, water, air & heat up to 80°C. Poor resistance to Ozone, UV, Sunlight, oil & solvents & organic chemicals.
NO. GRADES DENSITY (g/cc) HARDNESS (SH–A) TENSILE (Kg/cm2) Elongation (%)
1 BNS-1240 1.20 40 80 600
2 BNS-1345 1.30 45 90 500
3 BNS-1450 1.40 50 70 450
4 BNS-1565 1.50 65 60 400
5 BNS-1670 1.60 70 50 300
PRODUCT DIMENSIONS
Rotocure Finish Plate Finish
SIZE (Mtrs) THICKNESS (MM)
1.2 x 10, 20, 30 3 to 12
Finish Smooth / Texture Impression
SIZE (Mtrs) THICKNESS (MM)
1.2 x 2.4 3 to 25
1.0 x 2.0 3 to 25
MANUFACTURING TOLERANCES
THICKNESS WIDTH LENGTH HARDNESS DENSITY
+ / - 0.3mm or 10% whichever is higher + / - 2% + / - 5% + / - 5 + / - 0.05
STORAGE OF PRODUCTS
Do not expose rubber sheet to direct sunlight, sheets away from heat source, preferably in dark, air ventilated room will help give longer life & optimum properties
Do not remove polythene packing before use to prevent it from exposure of atmospheric oxygen, ozone & polluted air. Do not store rubber sheet rolls in open, even after covering it with tarpaulin to protect from air & rain. Always keep rolls in vertical position ONLY
Keep rolls away from solvent, oil & fuel storage. Do not use hooks while loading/unloading the rolls. Inspect sheet for smooth surface & hardness (with rubber hardness tester)
DESCRIPTION:
Commercial Grade Neoprene rubber blended with natural rubber is a general-purpose sheet for most commercial applications. This grade of rubber is used as a barrier or gasket material and can also be used inside rooms for sandblasting and impact resistance for industrial needs. Commercial Grade Neoprene rubber sheet / roll are moderately resistance to oil, sunlight, ozone and oxidation material providing abrasion resistance, repeated flexing applications, wide temperature range (excellent cold temperature flexibility) and has a physical toughness.
APPLICATIONS:
Wear resistant pads, vibration pads, isolation mounts, buffers, diaphragms, industrial matting, water retaining structures and in industrial applications such as gaskets, corrosion-¬resistant coatings. For more information click here.
COMMERCIAL GRADE NEOPRENE RUBBER SHEET
NO GRADES NEOPRENE (%) DENSITY (g/cc) HARDNESS (SH–A) TENSILE (Kg/cm2) Eb (%)
1 BNPNR-15 15 1.65 65 20 150
2 BNPNR-30 30 1.60 65 30 200
3 BNPNR-50 50 1.55 65 40 200
4 BNPNR-70 70 1.50 65 50 250
PROPERTY:
General purpose sheets / rolls resist moderate oil & heat resistance, fungus resistance, flame retardancy, acid & alkali resistance, sunlight aging & heat resistance up to 100°C. Best quality for sealing gasket, packing, mounting pad, machinery packing, manhole packing, as a mechanical applications without confect any fuel & also useful in marine parts due to good ozone resistance.
PRODUCT DIMENSIONS
Rotocure Finish Plate Finish
SIZE (Mtrs) THICKNESS (MM)
1.2 x 10, 20, 30 3 to 12
Finish Smooth / Texture Impression
SIZE (Mtrs) THICKNESS (MM)
1.2 x 2.4 3 to 25
1.0 x 2.0 3 to 25
MANUFACTURING TOLERANCES
THICKNESS WIDTH LENGTH HARDNESS DENSITY
+ / - 0.3mm or 10% whichever is higher + / - 2% + / - 5% + / - 5 + / - 0.05
RECOMMENDATIONS REGARDING STORAGE AFTER RECEIPT
Store according to DIN 7716 standards.
Products must be stored in cool, dry places with temperature ranging between 10°C to 30°C, sheltered from the sun & free from ozone for better shelf life.
Avoid contact with hydrocarbons, solvents, acids & alkalies.
To maintain the sheet/roll in optimum condition they should be stored in cool and dark place. If there is any doubt about the condition of sheet/roll, they should be retested before putting into service.
Products should be issued in the order of their date of manufacture.
DESCRIPTION:
Neoprene rubber is a chloroprene rubber, which has excellent mechanical property & good abrasion resistance. It gives good resistance to oil & heat, ozone, sunlight & weather and also gives good adhesion to metal surface. Neoprene rubber sheets / rolls are available for a range of applications in the industries. Many grades of neoprene are available depending on the application. These rolls will handle most tough industrial environments and moderate to heavy alkaline and chemical resistive situations. It is manufactured in pure neoprene rolls, commercial, medium strength, High Strength, Cloth Inserted, Antistatic, Fire Retardant, and Textured & in Strips. The temperature ranges from (-30°C to +100°C) in operation condition.
APPLICATIONS:
Neoprene rubber sheets / rolls are mainly used in sealing applications in construction sites & sound studios, general & industrial applications like sealing, gasket & packing to avoid leakages of oil, heat, steam, water, air, acid & alkali. It is also used in marine applications. It has flame retardant properties & good resistance to inorganic chemical products.
100% NEOPRENE RUBBER SHEET: BLACK
NO GRADES DENSITY (g/cc) HARDNESS (SH–A) TENSILE (Kg/cm2) Eb (%)
1 BNP-1445 1.4 45 60 350
2 BNP-1555 1.5 55 70 300
3 BNP-1665 1.6 65 70 250
DESCRIPTION:
Nitrile Rubber is a copolymer of butadiene and acrylonitrile. Nitrile rubber sheets are mainly used as oil & solvent resistance as it has good tensile strength, low compression set, flexibility & impermeability to gases. These sheets are very good resistance to petroleum based products having recommended for operating temperature from (-20°C to +110°C).
APPLICATIONS:
These sheets / rolls are mainly used for sealing, gasket & packing to avoid leakages from oil, solvent, petroleum based fluids, lubricating oil, transformer fluid & sealing against gases.
PROPERTY:
Very good resistance to petroleum based fluid goods & high temperature resistance up to 110°C.
Very low-level permeability to gases. Poor ozone resistance.
100% NITRILE RUBBER SHEET: BLACK
NO GRADES DENSITY (g/cc) HARDNESS (SH–A) TENSILE (Kg/cm2) Eb (%)
1 BNT-1240 1.2 40 60 500
2 BNT-1350 1.3 50 70 450
3 BNT-1460 1.4 60 80 400
4 BNT-1570 1.5 70 80 300
COMMERCIAL GRADE NITRILE RUBBER SHEET
NO GRADES NEOPRENE (%) DENSITY (g/cc) HARDNESS (SH–A) TENSILE (Kg/cm2) Eb (%)
1 BNTNR-50 50 1.6 65 20 250
PRODUCT DIMENSIONS
Rotocure Finish Plate Finish
SIZE (Mtrs) THICKNESS (MM)
1.2 x 10, 20, 30 3 to 12
Finish Smooth / Texture Impression
SIZE (Mtrs) THICKNESS (MM)
1.2 x 2.4 3 to 25
1.0 x 2.0 3 to 25
MANUFACTURING TOLERANCES
THICKNESS WIDTH LENGTH HARDNESS DENSITY
+ / - 0.3mm or 10% whichever is higher + / - 2% + / - 5% + / - 5 + / - 0.05
Store according to DIN 7716 standards.
Products must be stored in cool, dry places with temperature ranging between 10°C to 30°C, sheltered from the sun & free from ozone for better shelf life.
Avoid contact with acids & alkalies.
If there is any doubt about the condition of sheet/roll, they should be retested before putting into service.
Products should be issued in the order of their date of manufacture.
DESCRIPTION:
EPDM rubber sheet / roll is very good weather-proof quality that makes highly recommended for the outdoor use, These sheets resist to oxidation, UV rays, Ozone, weathering & low temperature flexibility. The operating temperature range is from (-40°C to +130°C). EPDM rubber sheets / rolls are stable for long time due to its inert structure
APPLICATIONS:
EPDM rubber sheets are highly used for industrial & outdoor application like weather strips, drinking water applications, rain water sealing, protection against sunlight & heat gaining as a roofing membrane & acid resistance applications. Also useful as a liner in pulverizing system.
PROPERTY:
Very good resistance to water & water-based chemicals withstand temperature up to 130°C. Very good weathering resistance. Good resistance to mild acids, liquid fertilizer & break fluids. No resistance to oil & oil based products.
100% EPDM RUBBER SHEET: BLACK
NO GRADES DENSITY (g/cc) HARDNESS (SH–A) TENSILE (Kg/cm2) Eb (%)
1 BEP-1155 1.1 55 70 500
2 BEP-1260 1.2 60 80 400
3 BEP-1365 1.3 65 100 300
4 BEP-1470 1.4 70 70 250
COMMERCIAL GRADE EPDM RUBBER SHEET
NO GRADES EPDM (%) DENSITY (g/cc) HARDNESS (SH–A) TENSILE (Kg/cm2) Eb (%)
1 BEPNR-50 50 1.5 65 50 250
PRODUCT DIMENSIONS
Rotocure Finish Plate Finish
SIZE (Mtrs) THICKNESS (MM)
1.2 x 10, 20, 30 3 to 12
Finish Smooth / Texture Impression
SIZE (Mtrs) THICKNESS (MM)
1.2 x 2.4 3 to 25
1.0 x 2.0 3 to 25
MANUFACTURING TOLERANCES
THICKNESS WIDTH LENGTH HARDNESS DENSITY
+ / - 0.3mm or 10% whichever is higher + / - 2% + / - 5% + / - 5 + / - 0.05
RECOMMENDATIONS REGARDING STORAGE AFTER RECEIPT
Store according to DIN 7716 standards. Products must be stored in cool, dry & dark places
Avoid contact with hydrocarbons, solvents, acids & alkalies.
If there is any doubt about the condition of sheet/roll, they should be retested before putting into service.
Products should be issued in the order of their date of manufacture.
DESCRIPTION:
Butyl Rubber sheet / roll are a very low permeability to air & other gases. These sheets have excellent resistance to sunlight, ozone & oxidation. The operating temperature resistivity ranges from (-30°C to +110°C). It is resistant to most inorganic products and best resistance to mineral acids & alkaline.
APPLICATIONS:
These sheets / rolls are used for Chemical tank lining, Pharmaceutical stoppers, Acid protective clothing & many more applications.
PROPERTY:
Very good resistance to acids & alkalis. Very good for low resilience applications like shock absorber & vibration dampers. Not recommended its use in applications where resistance to oils & hydrocarbons is required.
NO GRADES DENSITY (g/cc) HARDNESS (SH–A) TENSILE (Kg/cm2) Eb (%)
1 BIIR-12560 1.2 55 80 350
2 BIIR-13065 1.3 60 60 300
3 BINR-60
(IIR: NR = 60:40) 1.3 65 70 350
PRODUCT DIMENSIONS
Rotocure Finish Plate Finish
SIZE (Mtrs) THICKNESS (MM)
1.2 x 10, 20, 30 3 to 12
Finish Smooth / Texture Impression
SIZE (Mtrs) THICKNESS (MM)
1.2 x 2.4 3 to 25
1.0 x 2.0 3 to 25
MANUFACTURING TOLERANCES
THICKNESS WIDTH LENGTH HARDNESS DENSITY
+ / - 0.3mm or 10% whichever is higher + / - 2% + / - 5% + / - 5 + / - 0.05
RECOMMENDATIONS REGARDING STORAGE AFTER RECEIPT
Store according to DIN 7716 standards.
Products must be stored in cool, dry & dark places with temperature ranging between 10°C to 30°C, sheltered from the sun & free from ozone for better shelf life.
Avoid contact with hydrocarbons, solvents.
If there is any doubt about the condition of sheet/roll, they should be retested before putting into service.
Products should be issued in the order of their date of manufacture.
DESCRIPTION:
Diaphragm Rubber sheets are manufactured by inserting 1 ply & 2 ply Nylon Fabric used as Diaphragms for wide variety of applications specifically for Oil, LPG & solvent resistant applications. Recommended use for control valves, regulators, pumps etc. Diaphragm sheet is manufactured with high quality Nitrile rubber compound designed for long service. This rubber sheet is reinforced with multi-ply fabric to provide desired strength. The purpose of providing insertion is to provide additional strength to material in order to make it more pressure proof. Selection of fabric is available on request.
NO GRADES DENSITY (g/cc) HARDNESS (SH–A) TENSILE (Kg/cm2) Eb (%)
1 BDR-1370 1.3 70 80 300
PRODUCT DIMENSIONS
Rotocure Finish Plate Finish
SIZE (Mtrs) THICKNESS (MM)
1.2 x 10, 20, 30 3 to 12
Finish Smooth / Texture Impression
SIZE (Mtrs) THICKNESS (MM)
1.2 x 2.4 3 to 25
1.0 x 2.0 3 to 25
MANUFACTURING TOLERANCES
THICKNESS WIDTH LENGTH HARDNESS DENSITY
+ / - 0.3mm or 10% whichever is higher + / - 2% + / - 5% + / - 5 + / - 0.05
RECOMMENDATIONS REGARDING STORAGE AFTER RECEIPT
Store according to DIN 7716 standards.
Products must be stored in cool, dry & dark places with temperature ranging between 10°C to 30°C, sheltered from the sun & free from ozone for better shelf life.
Avoid contact with acids & alkalies.
If there is any doubt about the condition of sheet/roll, they should be retested before putting into service.
Products should be issued in the order of their date of manufacture.
Electrical Insulation Mat is highly recommended for total safety of workmen from electrical shock when working in or around environment like High Voltage Panels, Sub-station, Power Transformer Rooms, LT & HT Labs, near Bus bars, near Control Panels etc. Safety from electrical shock is required for workmen whether they are involved in Electricity Generation, Transmission, Distribution or its use. There are distinct features that set this High Voltage Insulating Mats apart from the REST whether they are Traditional Rubber mats or any other kind of synthetic mats.
TYPICAL FEATURES
Embossing: Anti-Skid without metallic derivative.
RECOMMENDED THICKNESS & VOLTAGE
SI.NO. CLASS / USER VOLTAGE'S RECOMMENDED THICKNESS (mm)
1 A/ 0 to 3.3 Kv 2.0
2 B/ 3.3 to 11 Kv 2.5
3 C/ 11 to 33 Kv 3.0
RECOMMENDATIONS REGARDING STORAGE AFTER RECEIPT
Standard width is 1 meter.
Can be pasted at the front and rear side of the control panels and other electrical installations
Exporter of all types of carbon steel (cs) / stainless steel (ss) / mild steel pipes fittings
Steel Tube Engineering Company is having a good capacity to make seamless pipes from its own Mother Hollows with solution annealing in a continuous roller hearth furnace. Steel Tube Engineering Company is giving product under all third party and customer?s inspection with In-house testing facilities also can supply in double random length up to 12 meter on customer's request.
Grade: TP304/304L, 304H, TP316/316L, 316Ti, TP317/317L, TP321/321H, TP347/347H, S31260, S31500,S31803, S32550, S32750, S32760.
Size: 1/8 NB TO 12? NB
Thickness: Sch 5s, 10s, 40s, 80s, 160, XXS
Specifications: ASTM A-312, A-790, Equivalent to ASME, EN, JIS Etc.
Applications: Nuclear Power Plants, Oil & Gas, Petrochemical & Refinery, Chemical & Fertilizer, Power Plant & All major process industries.
Steel Tube Engineering Company is reputed Project Supplier, Wholesaler and Exporter of all types, sizes and tailor made Fasteners. We also performed all the Quality Test of a Product as Per Indian as well as International standard. Steel Tube Engineering Company looks to maintain a solid and long-term relationship with its associates. Our success is steered by our passion for excellence. We believe that relationships are based on mutual goals, ethical business practices and the single minded pursuit of delivering the extraordinary.
Situated in Mumbai, Maharashtra our organization Steel Tube Engineering Company is well known among the customers due to presenting best products and services. Experts offer these products in market across the country in complete safe packing and durable frame. We also provide Third Party Inspection (TPI) EIL, CEIL, PDIL, UHDE, Toyo, Tecnimont, SGS etc. as per client requirement. Customers can easily avail these products from the market at lower expenses. Besides this, these written features are the strength of our firm:
- Quality products
- Quick delivery
- Long term relationship
- Competitive price
- Skilled professionals
- Raw Material Test Certificates
- Third Party Inspection Facility
Product Details:
Size 1/2"-2"
Range :
Screwed : 3/8 to 2" upto 6000#
List of Specifications :
1. ANSI/ASME B16.11 Forged- Fittings, Socket Welding & Threading.
2. ANSI B1.20.1 Pipe Threads, General Purpose
3. ASTM A105, A182, A234, A350, A262, A153.
Exporter of all types and Sizes of IBR certified or NON-IBR Carbon Steel (CS) / Stainless Steel (SS) / Mild Steel Pipes
Exporter of angle, beam, channel, tmt bar, flat, sheet and plate.
Exporter of IBR certified or Non-IBR Pressure Reducing Station System as per client specifications.
