New design textile opener series
Thisnew design textile openingmachine ismost advanced openingseries automatic back tocotton.Its the ideal to process the textile cloth waste, spinning yarn waste.And it can loose fabric waste, hard waste, which prepare for further process by gm series textile waste recycling machine.Efficiency, saving, processing, cotton fiber length and simple damage etc.
Opening machine 400
Opening machine 500
Application and features:
Gm400 / gm500 / gm550 / gm600 series opening machine synthesizeskinds of processing machinery characteristics and advanced experience of design and manufacture. It was identified that the machine basically reached the high quality, low consumption requirements, and have model compact, easy operation, safety . This machine is a high-speed operation licker centrifugal force generated to exclude the mechanical cotton material impurities and tear loose. The machine is processing old quilt, scrap yarn, cloth angle, ideal for linen and other items.
Note: there are two types of gm600 opening machine:gm600 iron opening and gm600 wooden opening. Eachtypehave their own characteristics, the gm600 wooden opening with light weight, and the gm600 iron opening machines using life is much longer than the wooden opening machine.
Four roller textile waste cleaning machine
Textile waste cleaning machine
Textile waste recycling machine
Main technical parameter
Modelgm250-4gm400-
Dia250mm400mm
L*w*h(mm)4320*1500*1150mm4930*1500*1150mm
Weight2000kg2665kg
Motor power7.5/5.5kw7.5/5.5kw
Textile waste cleaning machine
Cleaning machine
Gm250 / gm400 textile wastecleaning machine
Application and features
Gm250 / gm400 series cleaningmachinehave reasonable structure, model is compact, easy to operate, the noise is small, high output, and the processing quality well, the fiber damage small, blanking the automatic recovery features. Due to the high power of independent type suction fan, and make the discharging dust more superior performance. Can be widely used for various chemical fiber, linen, wool, textile waste yarn, waste costume, textile leftover material, non-woven fabrics and other raw materials have the loose. Used in textile, toys, clothing, shoes, knitting chemical fiber, waste processing industries.
Gm400 textile waste opening machinegm500 textile waste opening machine
Gm550 textile waste opening machine
Gm600 textile waste opening machine
Textile waste recycling machine
Gm600 textile waste opening machine is the most wide used and efficiency opening machine. It has two kinds, wood roller and iron roller. The wood roller garnet is dense and good effect. The iron roller has convenient layering. Users can choose it by your requirement.
The new design textile waste opening machine with chute feed, through the fan port feed the material into the machine automatically. It saves labor costs. Safetyand non-pollution.
Two kinds of opening machine have their own specialty. Users can choose the machine b your demand.
Mechanical multi-needle quilting machine
Quilting machine
Usage:
Fashionable patterns can be quilted into the various types of bedding. Thick bed quilt, sponge and leather products can also be handled.
Variety of specifications of the quilting machine can be customized and producedaccording to the requirements of users. Shuttle havesmall model (7) and largemodel(10according to usersneeds customized.(but twinneedle rows isimpossible under 10 shuttle.)
Themachine is produced by years of research and experimentof all ourtechnical staff.High-performance, andsimple operation, strong characteristics of a new type.apparel trade, industry, interior decoration, etc in the sewing industry, userlove to use thisnew type of machine.
Main parameterof the hot selling gmw94a mechanical multi-needle quilting machine.
Non-woven felt equipment
Shandong gaomi rongda machinery co., ltd. , was established in 1999, located in gaomi, shandong province, which is near to qingdao sea port, super geographic location for transportation.
Our company has been engaged in the field of textile waste recycling and processing of mechanical processing and manufacturing. Mainly produce textile waste recycling machinery line, which include opening machine and cleaning machine, textile waste cutting machine, baling machine, non-woven fabric making machine, needle punching machine, quilting machine and spare parts.
Company constantly introduce advanced production technology and new production processes, research and produce high quality, high cost performance textile machinery and equipment, continue to create value for customers.
In recent years, our products are sold in all over the country, with many domestic well-known textile machinery manufacturers have established long-term good business cooperation relations, and exported to southeast asia, east asia, the middle east, africa, europe and the united states and other places, has established the good sales and service network.
Rd series fiber cutting machine
Textile waste cutting machine
Gm series rotating knife type fiber cutting machineadopt the leading international design.to reach the continuous high-speed shear.
Product design is advanced, appearance, economic and practical, control sensitive, shear thoroughly.
The product uses many kinds of high quality special material, through hundreds of procedure precision processing. Broad scope, quickly cutting up all kinds of textile/cotton waste, flax, leather, pieces, plastic film and so on. The things size, length can be adjustable after cutting. It isconvenient to move, stable and reliable, easy maintenance, high production efficiency. It can solve a lot of manual labor chop cut, for the next step in processing operationsmatch the machine. Itis your ideal choice.
Needle punching machine
Textile machine parts
Chinese textile machine parts, include roller, garnet wire, needle.
We can supply the machinery parts that you need, for example, the roller, garnet wire and garnet wire package machine.
Needle-punched cotton machine
Needle punching machine
Needle-punched cotton machine can be fleeciness fiber, cottoto comb cotton, spread nets, acupuncture, strengtheningbecome needle-punched cotton, high- density and high- spring such as sofa cushion, spring mattress, carpeting, leatherette basic cloth, wall cloth, filtering materials, non-woven fabrics for engineering etc.
Advantages: the machine adopts crankshaft balance oil tank, automatic circulation and imbrications.with up and down integrity, compact and unique structure, convenient frequency ad well as its efficiency. Width can be adjusted, speed adjustable, thickness can be adjusted, strong degree adjustable, etc.
Three roller textile waste cleaning machine
Textile waste cleaning machine
Textile waste recycling machine
Modelgm250-3gm400-3
Dia250mm400mm
L*w*h(mm)3280*1500*1150mm3730*1500*1150mm
Weight1500kg2010kg
Motor power7.5/5.5kw7.5/5.5kw
Fan power1.1kw1.1kw
Dust cage500*1000mm500*1000mm
Rotating speed2000-2100r/m1800r/m
Six roller textile waste cleaning machine
Textile waste cleaning machine
Textile waste recycling machine
Main technical parameter
Modelgm250-6
Dia250mm
L*w*h(mm)6400*1500*1150mm
Weight3000kg
Motor power7.5/5.5kw
Fan power1.1kw
Dust cage500*1000mm
Rotating speed2000-2100r/m
Opening machine
New Type Recycling Machine
GM400Opening machine is mainly used for chemical fiber ,textile waste ,waste yarn ,waste clothes,leftover material and non-woven waste . This series of reasonable structure, compact model, convenient operation, low noise, good processing quality, the damage of the fiber is smaller.
Capacity:160-200KG/H
Diameter of roller:400mm
Power:22KW
M/C Dimension:2300*1500*1330mm
Weight:700KGS
Waste Cotton Recycling Machine
Textile Waste Recycling Machine
Advantage:
BasicR&Dpersonnelofcottoninthedomesticandforeignadvancedexperienceandtechnologyoeasy
andsimpletohandlefthe,ownR&Ddesignandmanufacturing,withcompactstructure,highperfor
mancecharacteristics,theuseofcentrifugalforcethornrollerproducedbythehighspeedrunning
outimpurities,suitableforprocessingofnewandoldquilt,wasteyarnwastecloth.
Maintechnicalparameters:
Output:120-160Kg/h
Thornrollerdiameter:600mm/250mm
Thornrollerdiameter:1200rmin/2000r/min
Atypeofthorn:3.5tooth/25.4mm
Overalldimension:12000X23 0X3000mmLength*width*height
Voltage:380v3phase50HZ
Cross Lapper
Nonwoven Needle Punching Machine
To fold and pave the fiber mesh after carding evenly into certain width and thickness,then transfer it to next procedure after pressurization.All paving aprons are driven separately for easy adjustment.The reciprocal commutation is controlled by frequency conversion and the rail is proof against ail leaking.
Input apron width1700-2700mm
Output apron width2500-8800mm
Lapping speed
Cutting Machine
GM800C Cutter
Equipment Description:�
1) This cutting series including 5 pieces blades;One fixed blade and four rotating blades;
2) Mainly used for chemical fiber, yarn, cloth materials
3) Good quality both for machine and related parts
Device parameters:Motor: 5kw+1.5kw
Output: 500~800kg/hr
Shear time: 576/min
Revolving knife: 2~4 sets high-speed steel knife�
Fixed knife: one sat alloy toll steel knife
Feeding conveyer belt: 1400*350mm
Discharging conveyer belt: 1400*350mm
Overall dimension: 3200*1000*1100mm
20T Baling Machine
Baling Machine
Model20T Baling Machine
Motor10kw
Cylinder160/80-950
Baling Size1000*600*(600-800)mm,(The Height can be adjusted between 600-800mm)
Oil PumpCB550
Allotter75
Dimension1700*1000*3050mm
Machine of WeightAbout 850-880kg
Weight of bale90-150kg/bale
Usage:
Mainly use for the compression packing of the cotton,textile materials.
Single-type fiber recycling machine
New Type Recycling Machine
The machine abolish the traditional processing technology,use the new international advanced U tooth wire and double roller gear knob opening design,realize the continuous high-speed production,production of high and low adjustable frequency conversion control.Any car automatically stop feeding .Product design advanced ,economical,low maintenance cost.
Products can be quickly opening various waste rags,waste cotton yarn,old clothes,cotton,chemical fiber,linen,non-woven fabrics and other scraps.Greatly improved the yield and quality of the machine.It is equipped with dust discharge to purify the environment of the workshop and improve the workers operating environment.
Model:GM1300 series
Working width:1300mm
Capacity:850kg/h
Installation dimensions:18000*4300*4975mm
Main roller:600mm
Total:37kw+37kw+37kw+30kw
Yarn/Clothes Recycling Machine
Textile Waste Recycling Machine
SpecificationGM600�Opening�machine
Diameter�of�Roller600mm
Output150-200kg/hr
Motor22KW
Size(mm)2500*1500*1330
WeightAbout�1000kgs
SpecificationGM250��Cleaning�Machine(First�roller)GM250�Cleaning�Machine(2nd,3rd,4th,5th�roller)
Diameter�of�roller250mm250mm
Output120-300�kg/hr120-300kg/hr
Motor7.5KW5.5KW+5.5KW+5.5KW+5.5KW
Size(mm)1200*1500*11501 040*1500*1150
Weight500kg500kg
Machine for Sound proof material
Needle Punching Machine
Opener+carding machine+needle punching machine
Equipment Description:
1) Cotton Carding machine belongs to textile machinery, according to the spinning technological process, combed cotton is an important process.
2) The former working procedure of cotton Carding machine is combined opening and scutching machine,the following process is drawing frame (general combing process) or lap former (exquisite combing process).
3)Its working principle is supplying the the cotton or fiber with cotton box which is sent by the front procedure to loosen them and get rid of impurities.
Device parameters:Main parameters of�Needle Punching Machine
Width of products: 2.3~2.5m
Thickness of products: 3~10mm
Output: 7~8m/min 400~800 g/m2
Needling Frequency: 100~650times/min
Needling Travel:�35~65mm
Number of Needle:� 6000pcs
Power:�26.5kw (7.5+7.5+7.5+4)
Cylinder of carding machine: 450 mm
Speed of carding machine: 1100 r/min
Size of one machine:�3000mm*700mm*2000mm
Covering area:�10m*4m*3.5m
Weight about�4800 kg
Spare Parts :�3 set motor / one set fan / one set control cabinetute feed
Machine:�One set carding machine + two set needle loom
Textile waste recycling machine, the textile opening machine is designedand manufactured by the advanced experience and characteristic of every kind of cotton machinery. It is mainly used for preliminaryopening theflaxwaste yarnleftover of clothold bedding bag and other textile material., the textile opening machines adopt the cast iron bracket and weld holder. It has high strength, model compact, rational construction, stable and reliable function. Material can be feeded directly with high efficiency opening and dust removing. The machine has new design garnet wire and roller, which are special made. Long life and little damage for fiberdue to the high speed running of roller, it produce the mechanical centrifugal force to get rid of the dust of textile materiathen tear and loose them., feature:, simple operation, little noise, good dust removing, safe, non-pollution. It can reach the usersrequirement, which can produce high quality and quantity product and low consumption., the textile opening machine has variety feeding forms. User can choose different machine according,
Textile waste baling machine
The balers have simple structure and convenient maintain, stable function. It is used for bale the recycling cotton. Bring Great convenience and considerable economic benefit for storage and delivery.
Needle Punching Machine
Nonwoven Needle Punching Machine
Middle-speed Needle-punching machine
Features:Needle punch machine suitable for normal nonwoven geotextile production, such as needle punched cotton, shoe material, geotextile felt, etc.High speed counter needle punching machine is used for production of high-density and high-performance nonwovens such as PU leather substrate, top lining for automobile and filtering materials
1Model�GMZ-360M
2Dimension of M/C�L3600W1400H2025(mm)
3Weight�6100kg
4Total power�12.35kw
5Main motor�7.5KW; 3 phase AC power 50Hz/
6Product density50g/-85 0g/(depend on the raw material type also product requirements and No of units)
7The average output�360kg/hour(Working at width 2500mm&300g/under running normal)
8ProtectionMain motor overload protection
9The control mode�Constant power & Inverter control
10Working width�2800mm/adjustable/cut at mid/product width more than 2500mm
11�Needle plate�Galvanized-faced ; with 3500holes/
12Bearing�KOYO/Or according to the customer's requirements
13Type of holes�Diameter1.83mm/An inverted cone
14Electrical components�SIEMENS
15Inverter�ZhengTai
16Fabric speed Recycled material or man-made fiber material or mixing material
17Fabric speed0.5-11m/min(depend on the raw material type also product requirements)
18Trip of needle�40 mm
19Transfer roller�Diameter:168mm/ Chromium plating process/high quality 50# steel
20Needle plate High strength alloys and shock shape /totally 18 mm thickness
21The main shaft & other work shaft Diameter: 80mm/ Dynamic balance and strength strengthening heat treatment/high quality steel
22Print Color Grey
23The control cabinet and panel Digital display instrument, and equipped with knob regulator, professional electric schematic diagram
24NoteDirectionThe round-trip distance of the needle can be adaptive adjustment according to the thickness of the raw materials.
