Appearance: Light green yellow to white powder
Solubility: Easily soluble in hot water
PH Value:
Akd wax is pale yellow waxy flake solid which is widely used in the paper industry as sizing agent. Our akd wax is a neutral sizing agent which can directly react to fiber with high content and i2, assay and low acid, and is more efficient sizing agent without organic impregnant like toluene¯benzene¯ and so on. After sizing with akd emulsion, it can make paper less water absorbing and controls its printing properties. It is welcomed by the paper mills all over the world.
Introduction
This surface sizing agent for kraft & corrugated paper has the advantages of less dosage, lower cost and easier operation. It can significantly improve the water-resistance and ring crush strength
Of board paper, corrugated paper and fine paper.
Specification
Appearance: white to light brown liquid
Ph value: 3-5
Solid content: 30%(±2%)
Water solubility: easy
Viscosity: max. 30 cp. S(25)
Ionicity: cationic
Shelf life: 6 months
Package and storage
Packed in 200kg or 1000kg plastic drum.
The product should be stored under the condition of 4-25, and the proper temperature should be below
30.
Notice
Application temperature should be below 75.
Appearance: Brown or Amber Liquid
Purity: 25%(+/-0.5%) Solid Content
Application: It has the function of AKD emulsified
colloid pretection, retentiom aiding and synergism and so on, can apply to various paper grades.
Appearance: yellow amber liquid
Purity: 40%(+/-0.5%) solid content
Application: it has the function of akd emulsified?colloid pretection, retentiom aiding and synergism and so on, can apply to various paper grades.
Cationic polyacrylamide (cpam)
Introduction
This product is a water- soluble high polymer.Its not soluble in most organic solvents. It has good flocculating activity, and can reduce the friction resistance between liquid.
Specification
Product:pam
Solid content:min. 88%
Ionicity:cationic
Appearancewhite fine-sand shaped powder
Molecular weight:6million-10million
Ion concentration:20%30%40%50%-80%
Shelf life:24 months
Application
1.This product is mainly used for the sludge dewatering to decrease moisture content of sludge.
2.This product is used in the treatment of industrial wastewater and municipal wastewater.
3.This product can be used for papermaking to improve dry and wet strength of paper and to increase the reservation of tiny fibers and fillings.
Application method
1.It should be diluted to the concentration of 0.1%(based on solid content).It is better to use neutral or desalted water.
2.When making up solution, the product should be scattered evenly in the stirring water, usually the temperature is between 50-60.
Package and storage
Packed in 25kgs woven bag with polypropylene.
This product is hygroscopic, so it is should be sealed and stored in a dry and cool place below 35.
Appearance: clear liquid, amphoteric
Purity: 15% &20%solid content
Application: it is the copolymer of acrylamide and acrylic acids, especially suitable to kraft paperboard and corrugated paper.
Appearance: pale yellow and viscous liquid, cationic
Purity: 12.5% solid content
This product can be used both in neutral and in alkalescent conditions.It can make the paper settled with higher stability in its sizes, which is with many advantages, such as wide ph applications, nontoxic, excellent absorbenct, higher dry/wet intensity, surface intensity, burst and excellent ink-absorbing ability etc.
Anionic polyacrylamide (apam)
Introduction
This product is a water- soluble high polymer.Its not soluble in most organic solvents. It has good flocculating activity, and can reduce the friction resistance between liquid.
Specification
Product:apam
Solid content:min. 88%
Ionicity:anionic
Appearance:white fine-sand shaped powder
Molecular weight:15million-20million
Ion concentration:8%15%25%40%
Shelf life:24 months
Application
1.This product can be used to treat industrial wastewater and mining wastewater.
2.This product can also be used as additives of the mud materials in oil-field, geological drilling and well boring.
Application method
1.It should be diluted to the concentration of 0.1%(based on solid content).It is better to use neutral or desalted water.
2.When making up solution, the product should be scattered evenly in the stirring water, usually the temperature is between 50-60.
Package and storage
Packed in 25kgs woven bag with polypropylene.
This product is hygroscopic, so it is should be sealed and stored in a dry and cool place below 35.
