Microcrystal Glass Ceramic Tile Grinding Machine
3D Microcrystal Glass Ceramic Tile Machine
ceramic tile grinding machine
Machine parameters
Working speed:1-5m/min
Grindingthickness:2-30mm
Max grindingsize:2000*2000
Min grindingsize:20mm*20mm
Machinesize:2000*1100*1620
Voltage:380v
Power:9.55KW
Weight:1200KG
Machine characteristics
1. The key parts of the machine adopts cast iron material, and is formed by natural effects processing which has the advantages of smooth, beautiful appearance, deformation and so on.
2. Method of clamping part imported from Italy PUPL synchronization with horizontal transfer, which greatly improve the precision of grinding, grinding parts adopt high-precision grinding head motor.
3. The configuration of the machine is chamfer with two wheels and flat two grinding wheels. It can realized the purpose of chamfer edge polishing and flat,edges and chamfers fine grinding.
3D microcrystal glass ceramic tile machine
Ceramic tile background wall machine
Backgroud wall
China wholesale digital photo printing machine price can be printed on many different materials, like ceramic, leather, glass, metal, leather and so on. it can automatic clean and control by computer. so it can print almost any design only you have the HD picture.
Main Features
1, Special for printing on ceramic tile and glass
2, Automatic lifting platform, easy to operate, reduce the alignment error
3, Mist spray or line spray printing method ca
n be choose, line spray speed up, mist spray exquisite and lifelike to eliminate drawing dice
4, Three-stage scraping and peristaltic pump device to prevent nozzle clogging, extended nozzle life
5, Automatic cleaning and nozzle moisturizing device to ensure the fluency of the ink and prevent nozzle cloggin
Any location can be set as the print origin, operation is simple and easy to learn
6, Silent linear guide, stable performance, high precision, pass the European CE certification, quality is guaranteed comparatively
7. Equipment printing platform has a scale to facilitate the visual measurement and display of the printed materials
8. Using imported LED-UV lamp, cold light source, no radiation, ultra-low power consumption, environment-friendly and energy-saving.Double servo motor, control the performance is more stable.
3D Leather Wall Panel Machine
3D wall panel machine
Machine parameters
Power:12.4KW
Dimensions:1140*500*1670mm
Stroke of movable beam:200mm
Working speed:piece/30s
Backing velocity:40 mm/s
Nominal pressure:400kn
Maximum working pressure of liquid:25MPa
Voltage:380V
Weight:1000KG
Machine characteristics
1, Precise four-column guide design ensured high precision of products.
2, Use large-diameter hydraulic cylinders, high presser and stable operation.
3, Use resisting high temperature motors, ensuring safe and long-term service.
4, Made by high-precision and high-strength thick steel,deformation and rigidity.
5, Optimization design, simple, economic and applicable. Direction valve integrated system hydraulic control system, reliable, long life, small hydraulic impact, reduce the link pip and leak. Independent electrical control system, reliable, operating convenience, centralized control buttons, support manual and automatic function.
6, Up and down heating form, adjustable temperature,make product texture more clearly.
7, High sensitivity grating sensors ensure safety operation.
8, The upper and lower positions of active guide pillar, head and platen are set electromagnetic induction device, accuracy positioning , precision products texture has good consistency.
9, Pressure-keeping and time-delaying character. Adjustable working pressing and travel.
10, All-in-one, replacement of mold can produce various different patterns of products.
3d microcrystal glass ceramic tile machine
3d ceramic tile printer
3d tile printing machine
Machine parameters
Print size:2500mm*1300mm
Print colour:4 colour
Print head:epson 5th
Quantity of print head":2
Print height:max.100mm
Bearing weight:max.100kg
Print speed:
Production mode:720dpi 6-8 m2/h
High-definition mode:1440dpi 4-5 m2/h
Automatic cleaning system:positive pressure cleaning
Ink features:uv ink
Nozzle technology:piezoelectric ink-jet printing
Ink box:continuous ink supply/ 3000ml
Voltage/ power:220v/3600w(uv 2000w)
Print range:ceramic, glass, wood, metal, leather, handicrafts, oil paintings, pvc, abs and so on
Drying system:uv lamp
Color control:conform to icc with curve
Image format:tifjpegpsdcdr etc.
Interface mode:usb2.0
Machine size:3560mm2240mm1370mm
Machine characteristics:
1. Automatic lifting platform, easy to operate, reduce the alignment error
2. Mist spray or line spray printing method can be choose, line spray speed up, mist spray exquisite and lifelike to eliminate drawing dice
3. Three-stage scraping and peristaltic pump device to prevent nozzle clogging, extended nozzle life
4. Automatic cleaning and nozzle moisturizing device to ensure the fluency of the ink and prevent nozzle clogging
5. Any location can be set as the print origin, operation is simple and easy to learn
6. Silent linear guide, stable performance, high precision , pass the european ce certification, quality is guaranteed comparatively
7. Equipment printing platform has a scale to facilitate the visual measurement and display of the printed materials
8. Using imported led-uv lamp, cold light source, no radiation, ultra-low power consumption, environment-friendly and energy-saving
9. Double servo motor, control the performance is more stable
3D Leather Wall Panel Machine
Wall Panel Machine
Machine parameters
Power:5.5KW
Dimensions:1720*770*2180mm
Forming time:2 minutes
Weight:700KG
Voltage:220
Pressure:0.8 MPA
Machine Advantage:
This is the third generation (newest generation) leather wall panel forming machine . machine cut from a piece of steel as a whole, stable and solid. Two stations, automatic forming and sealing edge in two minutes , and no need hot melt paper for sealing edge , save cost. the production speed is twice the old generation leather wall panel forming machine.
Machine characteristics
1, the electrical system adopts programmable controller PLC has data input and output devices and safety logic control function,support automatic and manual operation.
2, low-voltage electrical components adopt advanced photoelectric sensor and thermocouple,can precisely control the key parts operation and has high stability.
3, the body using high-precision, high-strength steel alloy frame construction and special welding techniques and materials, rigidity, abrasion resistance to vibration, long life.
4, use pneumatic pressure and heat molding, short cycle times and high productivity.
5, vacuum pump and compressor equipped, PLC insure the cylinder parts runs steady and non impact)
6,air compressor and vacuum pump running at the same time,thermostat heating system can adapt different environmental temperatures.Above factors ensure a high degree of consensus on the molded product accuracy
7, use motor,power,gas integration technology , each program controlled, safe and reliable, high rate of finished products and low waster rate.
8,This machine could various designs of leather wall panels with changing the molds.
3D Leather Wall Panel Machine
3D wall machine
Machine parameters
Power:KW
Pressure57Kg/CM2
Working radius150CM
Injection rate1050g/s
Quantitative memory:0 group
Voltage:20V
Dimensions1300*560*1500mm
Machine characteristics
Specification
1. All Stainless Steel Design
2. Mixed mode combination: static mixing / dynamic mixing.
3. Microcomputer metering processor.
4. Didactic learning and memory quantification.20 set quantitative memory.
5. Spit gum rate can be easily changed.
6. The barrel can be heated and stirred. An external vacuum pump.
7. Tank display the lower level.
8. The pipeline PTC sensor with heating constant-Temperature function
9. The pipeline 24-hour automatic timer / quantitative cycle [Technology of anti-sediment].
3D Leather Embossing Machine
3D Leather Wall Panel Machine
3D leather wall machine
Machine parameters
Power:18KW
Dimensions:2200 * 700 * 1900mm
Maximum stroke of movable beam:250mm
Working speed:piece/10s
Backing velocity:50 mm/s
Nominal pressure:630KN
Maximum working pressure of liquid:25MPa
Voltage:380V
Weight:1600KG
Machine characteristics
1, Precise four-column guide design ensured high precision of products.
2, Use large-diameter hydraulic cylinders, high presser and stable operation.
3, Use resisting high temperature motors, ensuring safe and long-term service.
4, Made by high-precision and high-strength thick steel,deformation and rigidity.
5, Optimization design, simple, economic and applicable. Direction valve integrated system hydraulic control system, reliable, long life, small hydraulic impact, reduce the link pip and leak. Independent electrical control system, reliable, operating convenience, centralized control buttons, support manual and automatic function.
6, Up and down heating form, adjustable temperature,make product texture more clearly.
7, High sensitivity grating sensors ensure safety operation.
8, The upper and lower positions of active guide pillar, head and platen are set electromagnetic induction device, accuracy positioning , precision products texture has good consistency.
9, Pressure-keeping and time-delaying character. Adjustable working pressing and travel.
10, Can produce various different patterns of products with changing different molds .
Leather Wall Panel Polishing Machine�
3D Leather Wall Panel Machine
leather panel machine
leather wall machine
Machine parameters
Power.69 KW
Weight350KG
Dimen750*1270*1620mm
Voltage380V
Working speedpiece/10s
Machine characteristics
1, Use multiple-inverters, adjustable travel speed.
2, Push device using elongated linear bearings
and screw drive,adjustable feed speed.
3, Customized grinding professional for matchable products,efficiency and accuracy.
4, Grinding speed variable frequency controlled and adjustable.
5, Dust recovery system make working environment clean and tidy.
6, Apply to grinding, polish color of various textured products, polished make products has living effect.
3D Leather Wall Panel Machine
leather wall panel machinery
DA-1030 the 3rd generation leather wall panel making machine
Power5.5KW
Voltag220V
Pressur0.8 Mpa
Forming tim120 seconds
Machine siz1660*700*2170 mm
Weight900 KGS
Advantag2 working station,sealing no need hot melt paper
Hubei Tengcang Building Materials Technology Co., Ltd have built a new five-star Industrial Park, covering 23,000 square meters, located in the "Dongyong hometown"Wuhan city circle Hubei Xiaogan city National High-tech Development Zone, with research buildings, office buildings, standardized plant and automation equipment and other hardware facilities .We have more than 100 Scientific and technical staff specialized in producing the new decorative materials machine, construction materials, building materials and building equipment entity enterprise.DWis the new type brand of building material from Hubei Tengcang Technology.
