Fengyue Aluminum Titanium Boron will provide the following advantages to Aluminum Alloy:
1. High fluidity allowing faster casting speeds
2. Better Homogeneity of the alloy and uniformity of the structure
3. Reduction of the crack tendency during solidification
4. Improvement of the surface quality
5. Enhancement of mechanical properties
6. Increase of the strength and toughness of aluminum alloy
Chemical Composition
AlTi5B1: Ti:4.5-5.5% B:0.8-1.2% Fe:0.3%Max Si:0.2%Max V:0.1%Max
Shape and Packages
Cut Rod: 9.5-10MM in diameter, 500-1000MM in length, 1000KGS / pallet or wooden case
Coil: 9.5-10MM in diameter, 180-220 KGS /coil, 3 coils/ pallet
Small Ingot: 25KGS/carton, 1000KGS/pallet
Cast cut bar: According to the length of the bar
Customer-made products for accurate and easy use could also be supplied.
Fengyue Aluminum Titanium Boron will provide the following advantages to Aluminum Alloy:
1. High fluidity allowing faster casting speeds
2. Better Homogeneity of the alloy and uniformity of the structure
3. Reduction of the crack tendency during solidification
4. Improvement of the surface quality
5. Enhancement of mechanical properties
6. Increase of the strength and toughness of aluminum alloy
Chemical Composition
AlTi5B1: Ti:4.5-5.5% B:0.8-1.2% Fe:0.3%Max Si:0.2%Max V:0.1%Max
Shape and Packages
Cut Rod: 9.5-10MM in diameter, 500-1000MM in length, 1000KGS / pallet or wooden case
Coil: 9.5-10MM in diameter, 180-220 KGS /coil, 3 coils/ pallet
Small Ingot: 25KGS/carton, 1000KGS/pallet
Cast cut bar: According to the length of the bar
Customer-made products for accurate and easy use could also be supplied.
Advantages of Aluminum Titanium Carbon(Al-Ti-C )- AlTi3C0.15
1. Nucleation rate of Titanium Carbon Aluminum Grain Refiners is Five Times as quick as Aluminum Titanium Boron. The desired modification effect will be seen in three minutes after Al-Ti-C is added. Refining effect of aluminum is very significant and the refining time could keep 45-60 minutes.
2. Effectively reduce the pinholes of aluminum foil as sizes of heterogeneous grain Tic is sub-micron, widely dispersed and disaggregated, so it's perfect for the process of aluminum foil.
3. Titanium Carbon Aluminum master alloys is much purer than Al-Ti-B, as potassium fluoridate isn't added during the production of AlTiC Grain Refiner
4. Reduce the inclusion content and eliminate the oxide layer and defects on the surface because of no TiB2 agglomeration in Al-Ti-C master alloys.
5. Al-Ti-C alloy can bring A356 Aluminum alloy wheels better mechanical property and higher elongation rate when used as grain refiner than the best Aluminum Titanium Boron.
6. Al-Ti-C alloys have more advantages for the casting production of aluminum alloy for nuclear industry which cannot include boron.
Shape and Packages
Cut Rod: 9.5-10MM in diameter, 500-1000MM in length, 1000KGS / pallet or wooden case
Coil: 9.5-10MM in diameter, 180-220 KGS /coil, 3 coils/ pallet
Small Ingot: 25KGS/carton, 1000KGS/pallet
Cast cut bar: According to the length of the bar
Customer-made products for accurate and easy use could also be supplied.
Fengyue Aluminum Titanium Boron will provide the following advantages to Aluminum Alloy:
1. High fluidity allowing faster casting speeds
2. Better Homogeneity of the alloy and uniformity of the structure
3. Reduction of the crack tendency during solidification
4. Improvement of the surface quality
5. Enhancement of mechanical properties
6. Increase of the strength and toughness of aluminum alloy
Chemical Composition
AlTi5B1: Ti:4.5-5.5% B:0.8-1.2% Fe:0.3%Max Si:0.2%Max V:0.1%Max
Shape and Packages
Cut Rod: 9.5-10MM in diameter, 500-1000MM in length, 1000KGS / pallet or wooden case
Coil: 9.5-10MM in diameter, 180-220 KGS /coil, 3 coils/ pallet
Small Ingot: 25KGS/carton, 1000KGS/pallet
Cast cut bar: According to the length of the bar
Customer-made products for accurate and easy use could also be supplied.
Advantages of Aluminum Titanium Carbon (Al-Ti-C ) (AlTi5C0.20, AlTi3C0.15)
1. Nucleation rate of Titanium Carbon Aluminum Grain Refiners is Five Times as quick as Aluminum Titanium Boron. The desired modification effect will be seen in three minutes after Al-Ti-C is added. Refining effect of aluminum is very significant and the refining time could keep 45-60 minutes.
2. Effectively reduce the pinholes of aluminum foil as sizes of heterogeneous grain Tic is sub-micron, widely dispersed and disaggregated, so it's perfect for the process of aluminum foil.
3. Titanium Carbon Aluminum master alloys is much purer than Al-Ti-B, as potassium fluoridate isn't added during the production of AlTiC Grain Refiner
4. Reduce the inclusion content and eliminate the oxide layer and defects on the surface because of no TiB2 agglomeration in Al-Ti-C master alloys.
5. Al-Ti-C alloy can bring A356 Aluminum alloy wheels better mechanical property and higher elongation rate when used as grain refiner than the best Aluminum Titanium Boron.
6. Al-Ti-C alloys have more advantages for the casting production of aluminum alloy for nuclear industry which cannot include boron.
Shape and Packages
Cut Rod: 9.5-10MM in diameter, 500-1000MM in length, 1000KGS / pallet or wooden case
Coil: 9.5-10MM in diameter, 180-220 KGS /coil, 3 coils/ pallet
Small Ingot: 25KGS/carton, 1000KGS/pallet
Cast cut bar: According to the length of the bar
Customer-made products for accurate and easy use could also be supplied.
Fengyue Aluminum Titanium Boron will provide the following advantages to Aluminum Alloy:
1. High fluidity allowing faster casting speeds
2. Better Homogeneity of the alloy and uniformity of the structure
3. Reduction of the crack tendency during solidification
4. Improvement of the surface quality
5. Enhancement of mechanical properties
6. Increase of the strength and toughness of aluminum alloy
Chemical Composition
AlTi5B1: Ti:4.5-5.5% B:0.8-1.2% Fe:0.3%Max Si:0.2%Max V:0.1%Max
Shape and Packages
Cut Rod: 9.5-10MM in diameter, 500-1000MM in length, 1000KGS / pallet or wooden case
Coil: 9.5-10MM in diameter, 180-220 KGS /coil, 3 coils/ pallet
Small Ingot: 25KGS/carton, 1000KGS/pallet
Cast cut bar: According to the length of the bar
Customer-made products for accurate and easy use could also be supplied.
Fengyue Aluminum Titanium Boron will provide the following advantages to Aluminum Alloy:
1.Improve the strength and toughness of aluminum alloy.
2.Eliminate columnar grains and feathery grains.
3. Improve the intrinsic quality of aluminum products by reducing the internal shrinkage cavities, porosity, hot cracking and segregation.
4. Increase more flexibility during the plastic deformation of the subsequent processing in the casting by improving its ductility
5. Reduce surface defects of aluminum product by improving its ductility.
6. Improve calendering rate and productivity on the premise of ensuring the quality of products.
7. Increase the using time of the calendering molds and auxiliary equipments on the premise of ensuring the quality of products.
8.Make the surface of aluminum more beautiful by improving the surface treatment of aluminum products
Chemical Composition
AlTi5B1: Ti:4.5-5.5% B:0.8-1.2% Fe:0.3%Max Si:0.2%Max V:0.1%Max
AlTi3B1: Ti:2.5-3.5 B:0.8-1.2% Fe:0.3%Max Si:0.2%Max V:0.1%Max
AlTi5B0.2: Ti:4.5-5.5% B:0.15-0.25% Fe:0.3%Max Si:0.2%Max V:0.1%Max
AlTi5B0.6 Ti:4.5-5.5% B:0.55-0.65% Fe:0.3%Max Si:0.2%Max V:0.1%Max
Shape and Packages
Cut Rod: 9.5-10MM in diameter, 500-1000MM in length, 1000KGS / pallet or wooden case
Coil: 9.5-10MM in diameter, 180-220 KGS /coil, 3 coils/ pallet
Small Ingot: 25KGS/carton, 1000KGS/pallet
Cast cut bar: According to the length of the bar
Customer-made products for accurate and easy use could also be supplied.
Advantages of Aluminum Titanium Carbon(Al-Ti-C ) - AlTi5C0.20
1. Nucleation rate of Titanium Carbon Aluminum Grain Refiners is Five Times as quick as Aluminum Titanium Boron. The desired modification effect will be seen in three minutes after Al-Ti-C is added. Refining effect of aluminum is very significant and the refining time could keep 45-60 minutes.
2. Effectively reduce the pinholes of aluminum foil as sizes of heterogeneous grain Tic is sub-micron, widely dispersed and disaggregated, so it's perfect for the process of aluminum foil.
3. Titanium Carbon Aluminum master alloys is much purer than Al-Ti-B, as potassium fluoridate isn't added during the production of AlTiC Grain Refiner
4. Reduce the inclusion content and eliminate the oxide layer and defects on the surface because of no TiB2 agglomeration in Al-Ti-C master alloys.
5. Al-Ti-C alloy can bring A356 Aluminum alloy wheels better mechanical property and higher elongation rate when used as grain refiner than the best Aluminum Titanium Boron.
6. Al-Ti-C alloys have more advantages for the casting production of aluminum alloy for nuclear industry which cannot include boron.
Shape and Packages
Cut Rod: 9.5-10MM in diameter, 500-1000MM in length, 1000KGS / pallet or wooden case
Coil: 9.5-10MM in diameter, 180-220 KGS /coil, 3 coils/ pallet
Small Ingot: 25KGS/carton, 1000KGS/pallet
Cast cut bar: According to the length of the bar
Customer-made products for accurate and easy use could also be supplied.
