Construction:
Hose type: 2 wire, 4 wire, 6 wires.
Max hose size: 2".
Hose internal size: 4-51mm.
Application:
Hose skiving machine, designed for skiving up to 6 wire hose in a diameter range from 1/4"to 2" and for inserting fittings.Used for full-scale production of hydraulic hose assemblies.
Introduction:
Model: HAPPY-200.
Fuel Tank Thrust: 47T.
Oil Pump Delivery Capacity: 30ml.
Hydraulic Oil: Summer YB-N46.
Winter YB-N32.
Crimping inside diameter range: 6mm ~ 32mm.
Weight of one machine: 100kg.
Volume: 600*350*460mm.
Construction:
Inner Tube:Â NBR, Black, Smooth.
Reinforcement:Fine wire reinforced, Electrically conductive.
Cover:Synthetic Rubber.
Temperature:-20° C to +45° C.
Feature:Conveying medium: Industrial water, waste water, seawater and irrigation inagriculture.
Character:
The hose has dual performance that is able to bear positive & negative pressure, it is able to work freely under the vacuum-80kpa(600mm mercury column), without flat& delamination, has good flexural property. The rubber body is flexible, the burst pressure is at least treble than working pressure.
Construction:
Inner Tube:�NBR, Black, Smooth.
Reinforcement:Fine wire reinforced, Electrically conductive.
Cover:Synthetic Rubber.
Temperature:-20C to +45C.
Feature:Conveying medium: Industrial water, waste water, seawater and irrigation inagriculture.
Character:
The hose has dual performance that is able to bear positive & negative pressure, it is able to work freely under the vacuum-80kpa(600mm mercury column), without flat& delamination, has good flexural property. The rubber body is flexible, the burst pressure is at least treble than working pressure.
R10 High Pressure Wire Spiral Oil Resistant Hydraulic Rubber Hose
Executive Standard:SAE 100R10
Construction:
Tube:Oil synthetic rubber .
Reinforcement:Four spiral plies of heavy steel wire wrapped in alternating directions.
Cover: An oil and weather resistent synthetic rubber.
Temperature range: -40 Centigrade to +100 Centigrade.
R1 Flexible Steel Wire Braided Hydraulic Rubber Hose
Executive Standard:SAE 100 R1/DIN EN 853
Construction:
Inner Tube:Oil resistant Nitrile rubber(BTR).
Reinforcement:One high tensile steel wire layers(1w).
Cover:Oil-resistant, abrasion-resistant, black Neoprene (CR) cover.
Temperature:-40° to +212° Fahrenheit.
Application:
Recommended for hydraulic system service with petroleum and water-base fluids, or general industrial service. Tough, long-lasting cover is suitable for many mobile hydraulic applications.
Construction:
Inner tube:oil resistant synthetic rubber.
Reinforcement:two high tensile steel wireâ braid(2t/b).
Cover:â abrasion and weather resistant synthetic rubber.
Temperature range:-40 c to 120 c.
Construction:
Tube:Oil synthetic rubber.
Reinforcement:Four spirals wire reinforcement.
Cover:Oil and weather resistant synthetic rubber cover.
Temperature range:-40 C to +120 C.
Applications:
This type hose mainly convey hydraulic fluid such as alcohol, hydraulic oil, fuel oil, lubricating oil, emulsified liquid, hydrocarbon and others.
Construction:
Inner Tube:Black, oil-resistant Nittrile (BTR).
Reinforcement:Six spiral layers of high tensile steel wire(sizes -12 and -16 have four layers).
Cover:Oil and abrasion resistant, gray Neoprene (CR).
Temperature:-40C to +121C.
Application:
Four-wire or six-wire spiral hose. Ideally suited for high-impulse applications. No skiving required with W-Series hose fittings (sizes -12 and -16 only). Recommended for petroleum and water-based hydraulic fluids in very high pressure applications. Meets or exceeds all SAE 100R13 specifications
Construction:
Tube:SBR, NR, BR.
Reinforcement:�Tire cord with helix wire and floating material layer.
Cover: SBR and CR blend.
Description:
Inner cover is excellent abrasion-resistance. It can protect the hose from the friction of depositional silt. And the colored indication layers can reflect the degree of the abrasion effectively. This can guarantees the normal use of the floating hose.
Application:
Floating high pressure rubber hose �is used with dredgers for silt/gravels conveyance. The suitable conveyance matters are usually mud, clay, fine sand, fine-mid sand and so on.
Characters:
1. Outer cover with excellent abrasion resistance and UV protection.
2. Inner cover with excellent abrasion resistance and high quality.
3. Wearing colored indicator layer.
4. Single foam flotation casing to prevent water absorption.
5. Can bear the high pressure of work.
6. The size of flange is at customers' request.
10. We can produce the hose up to ID1300mm, or as customers' requirement.
Specification:
Inside�Diameter Working�Pressure Burst�Pressure Vacuum�Pressure Adhesive
Strength Abrasion�Value Length
mm inch Mpa bar Mpa bar Kpa bar KN/m Cm3 ft m
254 10 1.5 15 4.5 45 80 0.8 4 4 38.7 11.8
304 12 1.5 15 4.5 45 80 0.8 4 4 38.7 11.8
350 14 1.5 15 4.5 45 80 0.8 4 4 38.7 11.8
400 16 1.5 15 4.5 45 80 0.8 4 4 38.7 11.8
450 18 1.5 15 4.5 45 80 0.8 4 4 38.7 11.8
500 20 1.5 15 4.5 45 80 0.8 4 4 38.7 11.8
550 22 1.5 15 4.5 45 80 0.8 4 4 38.7 11.8
600 24 2.0 20 6.0 60 80 0.8 4 4 38.7 11.8
800 32 2.0 20 6.0 60 80 0.8 4 4 38.7 11.8
850 34 2.0 20 6.0 60 80 0.8 4 4 38.7 11.8
900 36 2.0 20 6.0 60 80 0.8 4 4 38.7 11.8
1000 40 2.0 20 6.0 60 80 0.8 4 4 38.7 11.8
1200 48 2.0 20 6.0 60 80 0.8 4 4 38.7 11.8
1300 52 2.0 20 6.0 60 80 0.8 4 4 38.7 11.8
Construction:
Tube:Black, smooth SBR blended.
Reinforcement:High tensile synthetic yarn textile braided.
Cover:EPDM/SBR blended, black, or red yellow, weather and ozone resistant.
Temperature range: -40°C to +90°C.
Application:
Wide range service in general industrial services, mobiles shop pneumatic tools, etc.
1. Standard
Our Camlock Coupling are made to standard of A-A-59326
( superseding MIL-C-27487 )or DIN2828
2. Casting method
SS: Investment casting
Brass: Forging
Aluminum: Gravity casting, die casting
PP/Nylon: Injection
3. Size
From 1/2" to 6"inches
4. Type
Types available: A, B, C, D, DC, DP, E, F
5. Body material
Aluminum Alloy  or Stainless steel (SS316, SS304), Brass, Aluminum, Polypropylene, Nylon
6. Cam levers
We use stainless steel or brass cam levers.
7. Pins, Rings and Safety clips
We use steel plated pins, steel plated rings and Safety clips.
8. Threads
ISO228(BSP)/ISO7(BSPT)/ANSI B1.20(NPT)
Ptfe hose r14 stainless steel braided teflon hose
Executive standard:sae 100 r14
Construction:
Inner tube:ptfe hose, for high and low temperature used, anti-corrosive, non-stick.
Cover:sus304 stainless steel braided. High pressure resistance. All kinds of couplings can be available.
Temperature:-60â°c to +260â°c.
Competitive advantage:
1-professional manufacturer of various rubber/hydraulic hoses.
2- we have been cooperate with many famous foreign companies and to be there oem factory for many years.
3-we have advanced equipment, experienced engineers and workers.
4-certificates: iso 9001: 2008.
5- free samples can be offered.
6- good quality, competitive prices and timely delivery and first-rate service.
Features:
Excellent chemical resistance.
High and low temperature resistance(-80â° c to 260â° c).
High pressure resistance(45kv/mm).
Anti-aging, long life without an aging problem.
Wear resistance, high lubrication.
Non-stick, easily cleaned.
Fire resistance.
Electrically insulated.
Excellent flexibility.
High Quality Tank Truck Oil Suction Discharge Rubber Hose
Construction:
Inner Tube:NBR.
Reinforcement:Multiple plies polyester tire cord and steel wire helix.
Cover:Abrasion, oil and weather resistant.
Temperature:-30° F to +180° F.
Application:
Nitrile tube designed for use with oil, gasoline and other petroleum products. Ideal for pressure, gravity flow or suction service from tank trucks, tank cars or bulk plants.
Competitive Advantage:
1-Professional manufacturer of various rubber/hydraulic hoses
2- We have been cooperate with many famous foreign companies and to be there OEM factory for many years.
3-We have advanced equipment, experienced engineers and workers.
4-Certificates: ISO 9001: 2008
5- Free samples can be offered
6- Good quality, Competitive prices and timely delivery and first-rate service.
-
High pressure acid and alkali resistant rubber hose
Construction:
Inner tube:black, Â abrasion resistant rubber.
Reinforcement:compound fabric and spiral steel wire rope.
Cover:acid-base resistant rubber with black, red, blue, yellow and other light colors for choice.
Temperature:,  for acid-base rubber hose -20 , °c to +45 , °c (-4 , °f to +113 , °f).
 for hot acid suction hose -20, °c to +85, °c (-4, °f to +185, °f).
Application:
Acid-base flexible hoses are used for suction of sulfuric acid (concentration below 40%), hydrochloric (concentration below 30%), sodium hydroxide solution (concentration below 15%) and other acid, alkali solution with equal concentration (except nitric acid).
Construction
This kind of hose was designed by three thermoplastic inner layer of helically wound continuous fiber reinforced high strength metallic structural layer, protective layer of thermoplastic.
As a, thermoplastic inner layer of corrosion resistant medium transport layer, non-metallic pipeline structureto provide integrity protection of the protective layer bearing thermoplastic fibers.
Technical overview:
Thermoplastic inner line layer, as for conveying a, fluid (liquid or gas), the transport layer mainly use high-density polyethylene (hdpe) which can be resistant corrosion.
Structural layer spiral nonmetallic fibers, so that products have structural integrity.
Thermoplastic protective layer is a, protective high-density polyethylene (hdpe). We usually provide. Standard black jacket, which provides a, minimum of 20 years of protection against exposure to ultraviolet (uv) light. This kind of composite hose of white color can absorb low heat and provides uv protection for at least 20 years. Yellow jacket are frequently used utilities industry.
Application:
Spoolable non-metallic fiber reinforced plastic composite pipe for corrosion collection and injection,
Including general and acidic liquids or gases /, water /, crude oil /, refined oil, alcohol and so on.
Hot sale quality high pressure flexible air rubber hoseâ
Construction:
Tube:â plastic rubber composite.
Reinforcement:textile braided high tensile synthetic yarn.
Cover:black, or red yellow, weather and ozone resistant plastic and rubber composite.
Temperature range:-35c + 80c.
Application:
Wide range service in general industrial services, mobiles shop pneumatic tools, etc.
Sae 100 r2at flexible high pressure hydraulic rubber hose
Executive standard:sae 100 r2at / din en 853 2sn standard
Construction:
Inner tube:oil resistant synthetic rubber.
Reinforcement:two high tensile steel wire braid.
Cover:â abrasion and weather resistant synthetic rubber.
Temperature range:-40â° c to 120â° c. Ã?Â
Application:
Double wire braid: recommended for hydraulic system service with petroleum and water-base fluids, or general industrial service. Long-lasting cover is suitable for many mobile hydraulic applications. Meets or exceeds all sae 100r2 at hydraulic hose specifications.
Competitive advantage:
1-professional manufacturer of various rubber/hydraulic hoses
2- we have been cooperate with many famous foreign companies and to be there oem factory for many years.
3-we have advanced equipment, experienced engineers and workers.
4-certificates: iso 9001: 2008
5- free samples can be offered
6- good quality, competitive prices and timely delivery and first-rate service.
High quality hydraulic rubber hose oil hose r2at
Construction:
Tube: oil resistant synthetic rubber.
Reinforcement: two high tensile steel braids (2b).
Cover: abrasion, ozon and hydrocarbon resistant synthetic rubber.
Temperature:-50° c +120° c.
Application:
High pressure hydraulic lines, fuel oil, antifreeze solutions, air and water.
Specially designed for low temperature applications.
Construction:
Tube:Oil resistant synthetic rubber ..
Reinforcement: Fiber inner braid + one high tensile steel wire braid (1T/B X 1W/B) .
Cover Compound: One Impregnated fibre braid (1 T/B ) .
Temperature range: -40 C to +125 C.
Applications:
air brakespower steeringturbocharger oil suppliestilt cab cylinderstransmission coolant and filtration lines.
Construction:
Tube:oil resistant synthetic rubber.
Reinforcement: one braid of suitable fiber.
Cover Compound:an oil and weather resistant synthetic rubber.
Temperature range: -40C~+100C.
Applications:
This section covers hose for use with petroleum base hydraulic fluids.
Construction:
Tube: Nylon.
Reinforcement: Fiber or steel wire.
Cover: High Flexibility Nylon or Thetmoplastic.
Temperature range30° C to +80° C.
Applications:
Automobile, Engineering Machinery, Lathe, Agriculture Machine, Mining, Spurting the Oil Paint, Avigation&Spacefight, Cooling and other Hydraulic Control System.
Construction:
Tube:Black, oil resistant Nittrile rubber.
Reinforcement:Two braids of textile reinforcement, pretreated for tube and cover adhesion.
Helix wire between the braids resists collapse under vacuum or bending.
Cover:Oil and abrasion resistant synthetic rubber.
Temperature range:-40° To +21 Fahrenheit.
Application:
No skiving required.
Recommended for petroleum and water-bases hydraulic fluids in low pressure and vacuum service.
Construction:
Tube:Inner tube in high quality synthetic rubber compounds(Nitrile)
Reinforcement:One braid of high-tensile steel wire (Up to 1/2" one,
om 5/8" tow high tenstile steel wire spirals layers)
Cover: Abrasion & weather resistant synthetic rubber(Neoprene)
Temperature range: -40° C to +100° C.
Application:
High pressure hydraulic applications designed to replace 100R1 where higher pressures,increased flexibility and maximum abrasion reistance is required.
Construction:
Tube:oil resistant synthetic rubber.
Reinforcement:four high tensile steel wire spiral layers (4 w/s).
Cover:â abrasion and weather resistant synthetic rubber.
Temperature range40c to +121 c.
Applications:
Ideally suited for high-impulse applications. No skiving required with w-series fittings. Recommended for petroleum and water-bases hydraulic fluids in very high pressure applications. Meets or exceeds all sae 100r12 specifications.
Construction:
Tube:Oil resistant synthetic rubber.
Reinforcement:Four tensile steel wire spiral layers. (DN10/12/16/19/25)
Six tensile steel wire spiral layers. (DN32/38/51)
Cover:Black, abrasion and weather resistant synthetic rubber.
Temperature range: -40° C to +121° C
Application:
Heavy duty impulsive high pressure hydraulic applications like excavators, dosers, dumpers, cranes, compactors, rock breakers and hydraulic drill rigs and other construction equipments. Suitable for petroleum based hydraulic fluids, synthetic esters, biodegradable hydraulic fluids, water-glycol based fluids and air.
Construction:
Inner Tube:Oil resistant synthetic rubber.
Reinforcement:Two high tensile steel wire braid.
Cover:Abrasion and weather resistant synthetic rubber.
Temperature:-40C~+125C.
Application:
Mining, metallurgy, petroleum, construction machinery and chemical industry.
Construction:
Inner Tube:NBR, Black, Smooth.
Reinforcement:Fine wire reinforced, Electrically conductive.
Cover:Synthetic Rubber.
Temperature:-20 C to +45 C.
Feature:Conveying medium: Industrial water, waste water, seawater and irrigation inagriculture.
Character:
The hose has dual performance that is able to bear positive & negative pressure, it is able to work freely under the vacuum-80kpa(600mm mercury column), without flat& delamination, has good flexural property. The rubber body is flexible, the burst pressure is at least treble than working pressure.
Construction:
Inner Tube:Oil resistant synthetic rubber.
Reinforcement:Two high tensile steel wire braid.
Cover:Â Abrasion and weather resistant synthetic rubber.
Temperature range:-40 C to 120 C.
Application:
Double wire braid: Recommended for hydraulic system service with petroleum and water-base fluids, or general industrial service. Long-lasting cover is suitable for many mobile hydraulic applications. Meets or exceeds all SAE 100R2 AT hydraulic hose specifications.
Construction:
Inner Tube:Oil resistant synthetic rubber.
Reinforcement:One high tensile steel wire braid.
Cover: Abrasion and weather resistant synthetic rubber.
Temperature range:-40 C to 120 C.
Construction:
Inner Tube:Polyester elastomer(cream color).
Reinforcement:One polyester braid.
Cover:Proprietary urethane blend("Tuff-Skin").
Cover color:Black,non-perforated(other colors available).
Temperature range: -40F-135F(-40C-57C)Limited to 150F(+66C)for water-based or fire resistant fluids.(Delta) working length at rated WPSI:±2% max.
Features:
Bonded construction,slim profile and light weight,flexible and kink resistant,black color denotes 4000 psi,low coefficient of friction,excellent cut,gouge and abrasion resistance 4000psi working pressure.
Applications:
High pressure water cleaning ,lateral sewer lines,water jetting equipment,not for hydraulic applications.
Construction:
Tube:Oil synthetic rubber .
Reinforcement:Four spiral plies of heavy steel wire wrapped in alternating directions.
Cover: An oil and weather resistent synthetic rubber.
Temperature range: -40° C to +100° C.
Best sales excellent quality low price 3 inch silicone rubber hose
Construction:
Tube:silicone.
Cover:silicone.
Temperature range:-60c to +200c.
Color:black, red, blue, white, grey, green, transparent color
(the other colors available on request).
Competitive advantage:
1-professional manufacturer of various rubber/hydraulic hoses.
2- we have been cooperate with many famous foreign companies and to be there oem factory for many years.
3-we have advanced equipment, experienced engineers and workers.
4-certificates: iso 9001: 2008.
5- free samples can be offered.
6- good quality, competitive prices and timely delivery and first-rate service.
Specification:
Specification(mm)diameterthicknessdensity
Inch(mm)outer(mm)standard(mm)min(mm)
0.8*1.80.8±0.11.8±0.10.50.381.18±0.02
1.0*2.01.0±0.22.0±0.20.50.381.18±0.02
1.2*2.21.2±0.22.2±0.20.50.381.18±0.02
1.5*2.51.5+0.4/-0.22.5+0.4/-0.20.50.381.18±0.02
2.0*3.02.0+0.4/-0.23.0+0.4/-0.20.50.381.18±0.02
2.5*3.52.5+0.4/-0.23.5+0.4/-0.20.50.381.18±0.02
3.0*4.03.0+0.4/-0.34.0+0.4/-0.30.50.381.18±0.02
3.5*4.53.5+0.4/-0.34.5+0.4/-0.30.50.381.18±0.02
4.0*5.04.0+0.5/-0.45.0+0.5/-0.40.50.381.18±0.02
4.5*5.54.5+0.5/-0.45.5+0.5/-0.40.50.381.18±0.02
5.0*6.05.0+0.5/-0.46.0+0.5/-0.40.50.381.18±0.02
6.0*7.06.0+1.0/-0.57.0+1.0/-0.50.50.381.18±0.02
7.0*8.47.0+1.0/-0.58.4+1.0/-0.50.7
High Pressure Fire/Flame Resistance Hydraulic Rubber Hose
Construction:
High pressure steel wire spiraled rubber hose, covered with fire resistant pain coat, steel wire braided layer, and antiflaming layer.
Temperature range: 275F to 325F.
Application:
 It is mainly used in high temperature surroundings and in conditions having heat source or heat radiation source, such as oil field well-control, metal smelts, and chemical industry.
R12 Four Wire Spiral Hose Hydraulic Rubber Hose/Oil Hose
Executive Standard:SAE 100R12
Construction:
Tube:Oil resistant synthetic rubber.
Reinforcement:Four high tensile steel wire spiral layers (4 W/S).
Cover:Abrasion and weather resistant synthetic rubber.
Temperature range:-40C to +12 C.
Applications:
Ideally suited for high-impulse applications. No skiving required with W-Series fittings. Recommended for petroleum and water-bases hydraulic fluids in very high pressure applications. Meets or exceeds all SAE 100R12 specifications.
Industrial big diameter flexible hydraulic rubber hose
Construction:
Inner tube: nbr, black, smooth.
Reinforcement:fine wire reinforced, electrically conductive.
Cover:synthetic rubber.
Temperature:-20° c to +45° c.
Feature:conveying medium: industrial water, waste water, seawater and irrigation inagriculture.
Character:
The hose has dual performance that is able to bear positive & negative pressure, it is able to work freely under the vacuum-80kpa(600mm mercury column), without flat& delamination, has good flexural property. The rubber body is flexible, the burst pressure is at least treble than working pressure.
Note:
The i. D, o. D, w. P and b. P of water suction &discharge hose is able to produce as per the customers' requirements. The maximum i. D is up to 500mm, the maximum length is up to 100 meters.
Our factory also produces armored rubber hose according to client requirements.
3/4" to 12" Camlock Coupling / Quick ConnectorÂ
1. Standard
Our Camlock Coupling are made to standard of A-A-59326
( superseding MIL-C-27487 )or DIN2828
2. Casting method
SS: Investment casting
Brass: Forging
Aluminum: Gravity casting, die castin g
PP/Nylon: Injection
3. Size
From 1/2" to 6"inches
4. Type
Types available: A, B, C, D, DC, DP, E, F
5. Body material
Aluminum Alloy  or Stainless steel (SS316, SS304), Brass, Aluminum, Polypropylene, Nylon
6. Cam levers
We use stainless steel or brass cam levers.
7. Pins, Rings and Safety clips
We use steel plated pins, steel plated rings and Safety clips.
8. Threads
ISO228(BSP)/ISO7(BSPT)/ANSI B1.20(NPT)Â
Application:
Quick connect camlock couplings fittings are the economical, convenient and simple way to transfer liquids and dry products. available in a wide of range of materials and sizes to suit most applications ( Such as: In Petrochemical Industries, Fertilizers, Atomic Energy, Power Plants, Industrial & Hydraulic products serving the oil & gas industries, chemical industries, steel plants, mining industries, oil refinery industries ect.)
SAE100 R3 High Pressure Industrial Rubber Hose
Executive Standard:SAE J517 TYPE 100 R3 STANDARD
Construction:
Inner Tube:Oil Resistant Synthetic Rubber.
Reinforcement:Two High Tensile Steel WireBraid(2T/B).
Cover:Abrasion and weather resistant synthetic rubber.
Temperature range:-40 C to 120
Features:
1) Temperature range: -40 ~ 100C (-40 ~ 212F).
2) I.D. range: 1/4 - 1".
3) Meets or exceeds the requirement of SAE J517 100R3.
4) Flame resistance .
5) Resistant to oil, heat and abrasion.
6) Application: medium pressure hydraulic line, fuel oil, antifreeze solutions,
water and air.
Hydraulic Rubber Wire Hose Tube Cutting MachineÂ
Introduction:
Imported cutting blade, high intension and long lifetime, and possessing the function of compensating wearing of cutting blade.
Hose cutting speed can be stepless regulated.
Extracting fume and smoke, environmental protection and health.
Cutting blade has a function of automatic atomization and cooling, suitable for continuous operation.
Special motor, and cutting blade has good stability.
High Pressure Hydraulic Rotary Drilling Rubber Hose
Executive standard: GB/t10544-2003
Construction:
Tube:Internal rubber.
Reinforcement: Middle rubber and layers of wire-wind.
Cover Wire external layer.
Applications:
0
It is used for commenting oilfield, oil work over and geological prospecting, small drilling rig and water mining, transport mud and other liquids at room temperature.