Concrete Road Pipe Making Machine
Overview:
Suspension roller concrete pipe making machines are used for producing reinforced concrete pipes and Pre-stressed concrete pipe. This kind of machine is capable to make pipes with diameter from 300-2000mm and with length from 1-4meters. We can design flat end, socket & spigot end, male & female end. All the concrete pipes are widely used in urban drainage, agricultural field irrigation, road culvert and deep water well.
Working Principle:
This XG series Concrete tube machine is with simple structure. The suspended roller passes through the tube mould. Driving by the motor, the transmission shaft will drive the roller rotating at a regulated speed. Because of the friction force between the roller and stop ring at the ends of mould, the pipe mould will be drove rotating at the same direction as the roller.
By manual feeding concrete or conveying machine, the concrete mixture into the mould will be adhere to the inner wall of mould, and become solid. Owing to the function of the Roller Compressing Force and Centrifugal Force, and then form a standard quality pipe.
Features:
1. Wide Production Range: Inner Diameter form 200-2500mm, length 1-4meter.
2. Three kind of tube end joint: Flat end, Male& Female end, Spigot&Socket end.
3. High efficiency: Every pipe just need 3-5 minutes with high speed roller rotation.
4. Environment Friendly: Using dry casting concrete,no polluted slurry discharge.
5. Lower noise.
Concrete Cement Pipe Machinery in Africa ,
Overview:
Suspension roller concrete pipe making machines are used for producing reinforced concrete pipes and Pre-stressed concrete pipe. This kind of machine is capable to make pipes with diameter from 300-2000mm and with length from 1-4meters. We can design flat end, socket & spigot end, male & female end. All the concrete pipes are widely used in urban drainage, agricultural field irrigation, road culvert and deep water well.
Working Principle:
This XG series Concrete tube machine is with simple structure. The suspended roller passes through the tube mould. Driving by the motor, the transmission shaft will drive the roller rotating at a regulated speed. Because of the friction force between the roller and stop ring at the ends of mould, the pipe mould will be drove rotating at the same direction as the roller. z
By manual feeding concrete or conveying machine, the concrete mixture into the mould will be adhere to the inner wall of mould, and become solid. Owing to the function of the Roller Compressing Force and Centrifugal Force, and then form a standard quality pipe.
Features:
1. Wide Production Range: Inner Diameter form 200-2500mm, length 1-4meter.
2. Three kind of tube end joint: Flat end, Male& Female end, Spigot&Socket end.
3. High efficiency: Every pipe just need 3-5 minutes with high speed roller rotation.
4. Environment Friendly: Using dry casting concrete,no polluted slurry discharge.
5. Lower noise.
Reforcement Wire Cage Welding Machine for Concrete Pipe
1. Working Principle:
The cage welding machine consist of 4 parts of driven systems, inclusive Master plate of Rotation, Plate
of push reinforcing steel , expansion diameter part, and welding machine. The 4 parts are drived by
independent electrical motor. The Full variable frequency control ensures that the span of the latitude steel
and the angle of the spigot wonâ??t not change along with the welding speed. Adjustment the ratio of motor
speed can change the span of latitude steel, and angel of spigot. This machine can weld different diameter
cages via adjustment of location and position of the master plate and welder.cage welding machine is
special-purpose welder used to produce the high-strength concrete pipe pile reinforcement cages.
The welder is widely applied to reinforcement cage welding by self-stressing and prestressing pretensioning
method and post-tensioning method.
1. Large diameter of weldable main reinforcement, long frame, small torsion and good integral performance;
2. Small weld strength loss;
3. Adjustable cage pitch and quick forming;
4. High-speed and stable operation and high efficiency;
5. Variable frequency control and high stability and reliability;
6. Rational structure and easy and convenient operation and maintenance.
2. Features:
1.Automatic PLC control, Man-machine interface, Touch screen.
2.Variable Frequency Speed control and inverter;
3.Pneumatic clamping system, Gear wheel chain on the main plate;
4.Transformer and electrode water cooling system.
It makes up of four systems:The Main plate; Pushing Plate; Diameter changing; and Cooper welder,they are working, driven by the separate motor.
The Variable Frequency Ratio speed control system will promise the spiral pitch.
