Main Features
1) PLC smart control & high automaticity. The performance of rotary dryer and moisture content of dry materials is automatically controlled in stable states.
2) High heat efficiency. The design of multiple circumferential flights combination and flow rate adjustment devices ensure the control of drying period and temperature distribution. The effect of insulation is as high as 70% and raise the heat efficiency by 20%.
3) Four wheel drive, more steady and stable.
4) Save 50% space compared with traditional dryers and reduce 50% civil investment.
Product Description
It is used for beer waste, white wine grains and other high-humidity slag pressure filtration dehydration, strong dehydration, low power consumption, long service life, dehydrator manufacturer price is affordable, is the main equipment to achieve dehydration of winery waste.
Principle
The material passes through the conveyor, transported to the hopper of the dewatering machine, and evenly laid on the filter belt through the auger. The filter belt is leveled by the height of the material layer with the operation of the equipment so that the thickness of the material is completely uniform. Then, the upper and lower two ring-shaped filter belts are completely clamped, and the material layer is clamped by the driving roller, and the pair of rollers in the dewatering zone is mechanically pressed for several times to press out a large amount of water. According to the characteristics of the material, the extrusion force is automatically adjusted to meet the customer's requirements for material moisture.
The raw material should be dried by the dryer (The moisture content is about 15%) Feed into briquette machine High temperature and high pressure, curing, stamping forming Cooling Package Leave the factory.
The main motor is driven by the eccentric wheel to move 280 times per minute. The screw feeding machine starts to feeding the raw material, then the raw material will feed into the briquette machine of the feeding box by the dealer, and then will into the press room by the screw delivery from the left and right sides. The raw material will be pressed by the punch and mold, then heating-up and soften, and the volume is smaller.
Biomass screw extrusion briquette machine adopts the screw extrusion principle which biomass powder extruded into briquette. It is suitable for agriculture and forestry waste. For example, corn, sorghum, soybeans, cotton, rapeseed, peanut, sunflower straw, chaff, grasses, sawdust, twigs, bark, bamboo shavings, bagasse, etc. Great product density, small volume, good combustibility, and alternative fuel for wood and coal as fuel, which also can be used as a carbonized material.
Biomass energy is second only to coal, oil and natural gas one of the world's total energy consumption 4th. According to experts predict that biomass energy is likely to become an important part of the future sustainable energy system. In the middle of this century, using new technology to produce all kinds of biomass alternative fuels will account for more than 40% of total global fuel consumption.
According to the demand of market, our technical team designs and manufactures the equipment of biomass pellet production line, which are suitable for the biomass material with the 35-56% moisture to make pellet,such as sawdust, bamboo shavings, wood shavings,barley straw, oat straw, wheat straw, rye straw, rice straw, rice husk, bagasse, sorghum straw, corn straw, beans stalk, peanut vine stalk,etc. We also help optimize the drying and pelleting process according to the property of different biomass materials, production scale, application requirements, cost control, automation level, and site condition.
Dingli Sawdust Dryer:
Sawdust dryer is used for pellet sawdust or powder sawdust. Wet materials are continuously sent into the drum through screw conveyer and then get separated and pushed by the high-speed hot flow. The moisture in wet materials is taken away in this process and then we get powder or pellet dry materials. Sawdust dryer is widely used for the drying of straw briquette, charcoal, wood pellet fuel, sawdust briquette, corn straw, soybean straw, cotton stalk, wheat straw, sorghum stalk, wood shavings, sawdust, gingko leaf, mulberry leaves, and other fiber materials. Sawdust dryers are consist of heating furnace, feeding port, drum, filter drum, conveying pipe, cooling drum and discharging port.
Conduct oil heat (steam) drying drum dryer belongs to indirect heating mode, the heat conduction oil or steam drying heat, this type of dryer has low energy consumption of drying, the safety drying process, the material is not affected by heat source pollution, etc., which are widely used in the biomass, food, feed, fertilizer, bad slag chemical industry, medicine, coal, mining, and other small particles or weakly caking dry powder material.
Zhengzhou Dingli New Energy Technology Co., Ltd is the most professional, most authoritative enterprise in China, which is engaged in coal drying equipment research and development, which is the only Chinese coal slime drying industry set design, production, sales in the integration of science and technology enterprises. After nearly 20 years of rapid development, Dingli has gradually become the first brand of the Chinese drying equipment industry in China. Our company based on the lignite, washed coal such as high moisture content coal, with the carefully technical research and practice, developed the coal rotary drying drum system,After 20 years drying experience and constantly improvement in the equipment design, with its advanced technology, high efficiency, low energy consumption, stable operation, convenient operation and maintenance, security, environmental protection,the product are well received by users, more than 100 sets of coal drying equipment running in China and all over the world.
This type of equipment can be used for drying all kinds of coal, lignite, carbon coal, including anthracite, lean coal and poor lean coal, lean coal, coking coal, fat coal, air fertilizer coal, gas coal, coal and weakly caking coal, not sticky coal, long flame coal, lignite, coal washing, screening, raw coal, bituminous coal,the tail coal, midding coal, etc. Equipment can be made according to the customers' requirements.
Capability:0.3-4.0 ton/ h
Power:20-140 kW
Dry Material Moisture(%):12-15%(Adjustable)
Heat Source: Suitable for biomass, steam, natural gas, and other heat sources
Application:
Widely used for drying all kinds of coal, lignite, carbon coal, including anthracite, lean coal and poor lean coal, lean coal, coking coal, fat coal, air fertilizer coal, gas coal, etc.
Product Description
Conduct oil heat (steam) drying drum dryer belongs to indirect heating mode, the heat conduction oil or steam drying heat, this type of dryer has low energy consumption of drying, the safety drying process, the material is not affected by heat source pollution etc.,which are widely used in the biomass, food, feed, fertilizer, bad slag chemical industry, medicine, coal, mining and other small particles or weakly caking dry powder material.
Product Description
Coconut Peat Belt Type Dewatering Machine suitable for dehydration of coconut peat, coconut coir, coco pith, coconut chaff, and other material.
Principle
Transport material with moisture of 80%-90% to material hopper of dehydrator by conveyor, uniformly lay the material onto the filter belt by spiral material distributing device, the filter belt move with equipment running, limiting plate scrape flatly the material layer, make the material thickness completely uniform and accordance; then high and low two complete tensioning annular filter belt clamp the material layer, drive-by driving roller, the double roller of dehydration area continuously and repeatedly press by mechanical, remove large amount water content, moisture content after dehydration is 65-70%.
Automatically adjust extrusion force according to material features, satisfy customers` material moisture requirements. Equipment intelligent operation, 24 hours continuous automatic running, low labor working strength.
Coconut fiber has unique characteristics, such as moth-proofing, antibacterial, anti-corruption, and elastic. It is a traditional material for mattresses and cushions, which prevail on the market. However, coconut fiber shredded from coconut shell. The moisture content of coconut fiber is 30-45%. The traditional treatments go through 3 to 5 days of natural drying thus wasting excess time and labor. As coconut fiber also experiences long stagnation without water. The material color darkens and the original golden color fades, mildew, and mixed with the silt impurities. It affects the quality of the product.
Dingli company research and development the coconut fiber dryers, direct docking coconut fiber separator, dry shredded coconut, coconut chaff sorting, desalting and dewatering and drying a complete process within 40 minutes. It is energy conservation and environmental protection. The quality of coconut and coconut chaff can be guaranteed. After high-temperature treatment, coconut pith and coconut fiber get cleaner. The production line of the necessary equipment for the coconut pith and coconut fiber is mechanized with large-scale and intensive production.
Product Description
Introduction of Cow Manure, Pig Manure, Chicken Manure
1.Cow manure: The cow dung contains that 14.5% organic matter, N:0.30 ~ 0.45%, and P:0.15 ~ 0.25%, and K:0.10 ~ 0.15%. It is a kind of very good soil fertilizer. The content of organic matter in the cow dung is the lowest among the livestock manure. A slow-acting fertilizer.
2.Pig manure: Pig manure contains 15% organic matter (the total nutrient content is not high), N:0.5 ~ 0.45, P:0.6% ~ 0.5%, K:0.35 ~ 0.45%. Pig manure texture is fine, the composition is complex, containing protein, fat, organic acids, cellulose, semi cellulose, and inorganic salt. Pig manure containing more nitrogen, carbon and nitrogen ratio (14:1). Generally easy to be microbial decomposition.
3.Chicken manure: Chicken manure contains rich nutrients. That is contain the dry matter:89.8%, crude protein:28.8%, and crude fiber:12.7%, and digestible protein:14.4%, and nitrogen-free extract:28.8%, and phosphorus:2.6% Calcium:8.7%,Histidine:0.23%,methionine:0.11%, leucine:0.87%, lysine:0.53%, phenylalanine:0.46%.Through proper processing and utilization, it can be a very good green organic fertilizer or chicken feed, Chicken manure as farm manure, have higher efficiency than pig manure, cow dung etc. each ton sticky chicken manure containing plant nutrients :N:11.35 kg, P(P2O5):10.44 kg,K (K2O):5.45 kg. 1. In addition, the chicken manure contains a lot of organic matter, also can be used for making biogas feedstock.
The gypsum tumble dryer is mainly composed of hot blast stove, belt feeder, tumble dryer, belt feeder, induced draft fan, cyclone dust collector, bag filter (or wet dust collector) and operation control system. The equipment adopts the fair current (or countercurrent) drying process.
The working principle as following: After entering the drying drum, the wet materials are spitting into the following working areas: First, the material guiding zone. Plaster enters this zone and contacts with high-temperature hot air to quickly evaporate moisture. The material is in a large lifting flight angle is transferred to the next working area under the splicing; Second, the copy board area, in which the gypsum is dropped and pick up by the lifting flight to form the material curtain state. At this time, the material in full contact with the hot air, and the moisture in the plaster is rapid. The evaporative stripping becomes water vapor, and the water vapor is drawn away immediately by the induced draft fan to achieve the purpose of gypsum drying; the gypsum is dried in this zone to a loose state with moisture below 5-10% (or lower), after heat exchange of the material The required moisture state is reached and the final discharge zone is entered. The third is the discharge zone. The roller does not have a copy board in this zone. The material slides in this zone to the discharge port to complete the entire drying process.
Starch residue is the main by-product of cassava, potato, sweet potato and other agricultural products after the production of starch, moisture content is about 80%, as for high moisture content, heavy viscosity, with the traditional drying process equipment, drying temperature is high, slag starch Gelatinization chemical reaction, dextrin clogging material particles pores, water evaporation does not come out, the particles surface turned yellowish black, "outside the coke within the soft", a serious impact on the sale of dry residue; drying temperature is low, t the moisture cannot drying below 15 % at all, dryer sticky wall, gelatinization, agglomeration, drying equipment can not do normal production,this will lead to the impaired interest of the customers.Dingli brand starch slag dryer is based on the research and development for characteristics of raw material such as cassava, potato slag, and after a few sets of dryer producing experience, which can drying all kinds of potato residue below 10% in one time.
It can rapid drying moisture from 65-75% to 14-18% in one-time. Dry grass completely retained the nutrients of fresh pasture, bright color, smell fragrance, energy-saving 30-50% than the ordinary dryer, can maximize energy conservation and drying costs.
Suitable for drying elephant grass, alfalfa, wheat straw, barley straw, oat straw, rye straw, rice straw, sorghum stalks, corn stalks, potato vines, beanstalks, and 45-75% moisture of pasture straw.
Product Description
Fly ash rotary dryer is also known as the three layers of drum dryer, three return cylinder dryer, on the basis of the single-cylinder dryer, developed and manufactured, which is an industrial dryer on non-viscous, liquid material. At present three-cylinder dryer made by Dingli company, with mature technology, through the drying of the sand, fly ash, fly, mineral materials, slag and other material, the effect is very good.
Principle
The fly ash is conveyed to silo by belt conveyor or bucket elevator, and transport to the feed end by the feeder of the silo. The inclination of the feeding pipeline should exceed the natural inclination of materials so that to facilitate sand flowing into the fly ash dryer smoothly. The rotating cylinder of the dryer is slightly inclined to the horizon. To feed the material from the higher end and the heat carrier enter from the lower end, such produce adverse contact between them .sometimes, they can be fed to the cylinder together. As the cylinder running, the sand carried to the lower side by the gravity. In the process of moving forward, the wet raw material being roasted by the heat directly or indirectly to make the raw material to dry quickly, the final products discharge out by belt conveyor or screw conveyor. There is a shoveling plate installed in the fly ash dryer with the function of shoveling the materials up and down, to enlarge the contact area between airflow and materials and to enhance the efficiency and make the material running quickly. The heat carrier is hot air, the flue gas, etc. After the dryer process, It needs a cyclone dust collector to catch the items in the airflow. You should use a bag type or wet-type dust collector and afterward discharge the waste gas if you intend to further reduce the dust load of the exhaust.
Sugar beet pulp dryer, which is also named impeller mixing rotary drum drier, rake roller dryer, rotary rake drum dryer, rotary paddle roller dryer. It is specifically designed according to the problems of the traditional rotary dryer which is not suitable for high-moisture materials that MC is higher than 50% and the viscosity is relatively low. Meanwhile, since the black hole phenomenon occurring in the drum lowers the drying capacity and raises the energy consumption, the paddle rotary dryer sets high-speed spinning paddles, strengthening the crushing and separating function. The crushing effect enlarges the contact surface of particles, which largely increases the heat transfer rate and vaporization rate. According to the practical test, the unit vaporization capacity per hour of paddle rotary dryer is as much as 25-60kg/m2, which is 1-2 times of traditional rotary dryer. The output is raised by 50% and fuel consumption is reduced by 30%. At the same time, the footprint and drying efficiency is raised by 40%.
Biomass dry distillation carbonization furnace is Dingli new model products. The machine adopts an advanced thermal dry distillation carbonization technology. It greatly increases the carbonization rate from 85% to 98%, which is an easy operation, safe and protection environmental, and high production efficiency, which can save a lot of energy. It is the ideal equipment of coal, gas, oil, power plant. More sets of combined distillation carbonization furnace use the hoisting composite structure. It uses the hanging from the cooling method to shorten the production product date. And the efficiency of charcoal production is improved. meanwhile using a unique carbon gas (volatile hydrogen material and tar etc.) back burning technology.
The flue gas produced by carbonization is sufficient usage. In addition to satisfied the demand of heat stove, to achieve energy conservation and environmental protection requirements. The excess gas can be a heat source for dryer, which can save a lot of fuel in the production. That improves the benefit of the enterprise. Carbonized without using dynamic electricity. It uses mobile production, simple and convenient operation. It is an ideal equipment for large-scale charcoal production.
Dingli horizontal dry distillation carbonization furnace is specially used for log, wood, jute stick, and other long rod-type biomass characteristics adopts horizontal structure, cart entry, and exit raw material and the advanced hot gas dry carbonization process technology, using a unique carbonization flue gas (volatile hydrogen material and tar, etc.) Back Burning Technology, make full use of the flue gas produced by carbonization process, meet the thermal needs of carbonization furnace itself, greatly increase the carbonization rate, the carbonization rate increased from 80% to more than 95%, and easy to operate, safety and environmental protection, high production efficiency, can save a lot of energy, is the ideal equipment for carbonizing the long rod type biomass material.
The combination mode of multiple devices, use carbonized flue gas in tandem, can reduce fuel consumption during carbonization production and improve the enterprise benefit.
Dingli biomass dry distillation carbonization furnace is composed of a carbonization furnace body, furnace cover, inner tank, material cage, combustible gas return pipe, exhaust pipe, flue gas dust removal device, tank lifting device, and thermometer.
The furnace adopts the principle of anaerobic dry distillation to remove the volatile substances in the biomass and achieve the purpose of biomass carbonization.
Carbonization process has four steps: charging sealing furnace - preheat drying - anaerobic carbonization - cooling carbon.
This machine is suitable for all kinds of agricultural and forestry biomass charring making. For example, wood shavings, sawdust, wood chip, rice husk, cotton stalk, crop straw, bean curd, etc
Principle
First, the biomass material is ignited in the gasifier. The flue gas produced by burning after spraying, cooling, purification process, it produces the pure combustible gas (carbon monoxide, methane, ethane, etc.).As the early stage of the carbonization of heat source, through the early warming of the carbonized, to feed the material when the heat reaches the special temperature. The combustible gas that carbonation process of flue gas by spraying, cooling, purification process into the burned secondary. According to this method of circulation, sufficient to achieve a self-sufficient, then achieve the effect of energy-saving. The flue gas through purification, to reach the environment production and flue gas emissions-free. Which is reached to the standards of waste gas emptying.
High-frequency vacuum wood dryer is a kind of drying machine with a low temperature in vacuum situation, smaller but much faster than the conventional kilns. It is suitable for all kinds of wood, from veneer/lamina/board to thick lumber, even heavy timber with a large dimension. For a thin piece like veneer or floorboard lamina, high-frequency vacuum wood drying not only offer a short drying cycle but also eliminates the problem of the curve or shrink. For thick and hardwood, like Merbau, Mahogany, etc. HF wood dryer brings good drying quality with uniform moisture content, free of split or sparks both on the surface and inside of wood, short drying time will meet the customer's demand for production.
The equipment has the advantages of large production, high efficiency, energy-saving, and small floor area. It can be used together with the clean hot air furnace and suitable for drying high moisture materials such as food residue and so on. The moisture can be dried quickly from 65-75% to 14-18% at a time, and the dry food residue completely retains its original nutritional components, with bright colors and delicate scent. Comparing with the traditional dryer, energy consumption can be reduced by 30-50%, which can save energy and reduce the operating cost.
The dryer is suitable for food residue, oat straw, wheat straw, rye straw, straw, sorghum straw, corn straw, potato vines, beanstalks, etc. Dingli company optimizes the drying technology and equipment selection and configuration service according to the characteristics of each material, the size of production, the quality requirements, the application demand, the cost control, the automatic degree, the field working condition, the investment quota and so on.
According to the requirement of the market, Zhengzhou Dingli New Energy Technology Co., Ltd designs and manufactures paddle rotary dryer, which is as known as the paddle-harrow rotary dryer. It is specifically designed according to the problems of traditional rotary dryer. which is not suitable for high-moisture materials that MC is higher than 50%, and the viscosity is relatively low. Meanwhile since the black hole phenomenon occurring in the drum lowers the drying capacity and raises the energy consumption. The paddle rotary dryer sets high-speed spinning paddles, strengthening the crushing, and separating function. The crushing effect enlarges the contact surface of particles, which largely increases the heat transfer rate and vaporization rate. According to the practical test, the unit vaporization capacity per hour of paddle rotary dryer is as much as 25-60kg/m2, which is 1-2 times of traditional rotary dryer. The output is raised by 50% and fuel consumption is reduced by 30%. At the same time, the footprint and drying efficiency is raised by 40%. It is applicable for the drying process of high-moisture materials with 50%-85% moisture, such as sludge, bean dregs, starch residue, and sauce residue, spray corn bran, cassava dregs, brewer's grains, distiller's grains, straw, grass, organic fertilizer, chicken beef feces. We also help optimize the drying process according to the property of different biomass materials, production scale, application requirements, cost control, automation level, and site condition.
The mineral slag tumble dryer is mainly composed of hot air furnace, belt conveyor, rotary drum dryer, belt conveyor, induced draught fan, cyclone dust collector, bag dust collector (or wet dust collector) and operation control system. The equipment adopts the fair current (or countercurrent) drying process. Its working principle as following: After entering the drying drum, the wet materials are spitting into the following working areas: First, the material guiding zone. The mineral slag enters this zone and contacts with high-temperature hot air to quickly evaporate water. Under the circumstance of the large lead angle guide plate, it is transferred to the next work area; the second is the copy board area.
The gypsum tumble dryer is mainly composed of hot blast stove, belt feeder, tumble dryer, belt feeder, induced draft fan, cyclone dust collector, bag filter (or wet dust collector) and operation control system. The equipment adopts the fair current (or countercurrent) drying process. The working principle as following: After entering the drying drum, the wet materials are spitting into the following working areas: First, the material guiding zone. Plaster enters this zone and contacts with high-temperature hot air to quickly evaporate moisture. The material is in a large lifting flight angle is transferred to the next working area under the splicing; Second, the copy board area, in which the gypsum is dropped and pick up by the lifting flight to form the material curtain state. At this time, the material in full contact with the hot air, and the moisture in the plaster is rapid.
Pasture dryer is applied for drying grass, forage, alfalfa, napier grass, elephant grass, ( including materials like energy grass, herbage, lucerne, purple medic, Medicago falcat etc.) According to the characteristic, production capacity, applying requirement, cost control, operating convenience of each biomass materials, our company optimizes the drying technology. Recommended products: three-layer rotary drum dryer, patent number:ZL2009 2 0089749.2. This equipment is of huge production, high efficiency and energy saving, small floor space. Compared with common dryer machines, it saves energy by 30%-50%, thus saving energy and drying cost to the maximum.
Pasture dryer is applied for drying grass, forage, alfalfa, napier grass, elephant grass, ( including materials like energy grass, herbage, lucerne, purple medic, Medicago falcat etc.) According to the characteristic, production capacity, applying requirement, cost control, operating convenience of each biomass materials, our company optimizes the drying technology. Recommended products: three-layer rotary drum dryer, patent number:ZL2009 2 0089749.2. This equipment is of huge production, high efficiency and energy saving, small floor space. Compared with common dryer machines, it saves energy by 30%-50%, thus saving energy and drying cost to the maximum.
Main Features
1) PLC smart control & high automaticity. The performance of rotary dryer and moisture content of dry materials is automatically controlled in stable states.
2) High heat efficiency. The design of multiple circumferential flights combination and flow rate adjustment devices ensure the control of drying period and temperature distribution. The effect of insulation is as high as 70% and raise the heat efficiency by 20%.
3) Four wheel drive, more steady and stable.
Product Description
Zhengzhou Dingli New Energy Technology Co., Ltd. is currently the most professional and most authoritative enterprise engaged in the research and development of drying equipment in China. It is the only science and technology enterprise in China's drying industry that integrates design, production, and sales. After nearly 20 years Fast and steady development has gradually become the leader of the Chinese drying equipment industry. To the desulphurized gypsum, gypsum mineral powder, etc. The special drying system and drying machine have been meticulously researched and developed. After more than 20 years of drying practice and researches, it has been continuously improved. With its advanced technology, high efficiency, low energy consumption, stable operation, and easy operation and maintenance, safety and environmental protection, praised by users, more than 100 sets of drying equipment are perfectly operating in China and around the world. This type of equipment is widely used in cement, mining, building materials, chemicals, food, metallurgy, chemical, fertilizer production, slag, clay, and other industries. The equipment can be customized according to the type of material, depth of precipitation and user needs to meet the individual needs of each user.
Zhengzhou DINGLI New Energy Technology Co., Ltd. is currently the most professional and most authoritative enterprise engaged in the research and development of drying equipment in China. It is the only science and technology enterprise in China's drying industry that integrates design, production, and sales. After nearly 20 years Fast and steady development has gradually become the leader of the Chinese drying equipment industry. The dryer for slag, slag, and other materials has been meticulously researched and developed. After more than 20 years of drying practice and researches, it has been continuously improved.
With its advanced technology, high efficiency, low energy consumption, stable operation, and easy operation and maintenance, safety and environmental protection, praised by users, more than 100 sets of drying equipment are perfectly operating in China and around the world. This type of equipment is widely used in cement, mining, building materials, chemicals, food, metallurgy, chemical, fertilizer production, slag, clay, and other industries. The equipment can be customized according to the type of material, depth of precipitation and user needs to meet the individual needs of each user.
High humidity materials forming experts Zhengzhou Dingli company according to the market demand, company targeted development of material pellet fuel production line equipment, this production line applicable to the wood chips, sawdust, bamboo shavings, wood shavings, barley straw, oat straw, wheat straw, rye, straw, rice straw, sorghum straw, corn stalks, stem drying potato vines, beans, peanut vine and other material of moisture content is 35-65%.
According to the material of characteristics, production capacity, applying requirement, cost control, operating convenience of each biomass material, our company optimizes the drying technology. Recommended products: three-layer rotary drum dryer, patent number: ZL2009 2 0089749.2. This equipment is a large processing line. This dryer has high efficiency, energy-saving, and small floor space. Compared with other dryer machines, it saves energy by 30%-50%, thus maximum saving energy and drying cost.
DingLi pasture rotary drum dryer (Patent No.: ZL200920089749.2), the equipment with large output, high efficiency and energy saving, small footprint, which is particularly suitable for high-moisture materials such as pasture grass drying with clean type hot blast stove. Suitable for drying elephant grass, alfalfa, wheat straw, barley straw, oat straw, rye straw, rice straw, sorghum stalks, corn stalks, potato vines, beanstalks, and 45-75% moisture of pasture straw. According to each material characteristics, production scale, quality requirements, application requirements, cost control, automatic level, on-site conditions, investment quota to optimized drying process technology and equipment configuration services.
Crops straw dryer is applied for drying barley straw, oat straw, wheat straw, rye straw, straw, sorghum straw, corn straw, potato vines, beanstalks ( including materials like soybean straw, broad bean straw, pea straw, cowpea straw, lupine straw, peanut vine, etc.) According to the characteristic, production capacity, applying requirement, cost control, operating convenience of each biomass material, our company optimizes the drying technology. Recommended products: three-layer rotary drum dryer, patent number: ZL2009 2 0089749.2.
This equipment is of a huge production, high efficiency, and energy-saving, small floor space. Compared with common dryer machines, it saves energy by 30%-50%, thus saving energy and drying cost to the maximum.
Sawdust dryer is used for pellet sawdust or powder sawdust. Wet materials are continuously sent into the drum through a screw conveyor and then get separated and pushed by the high-speed hot flow. The moisture in wet materials is taken away in this process and then we get powder or pellet dry materials.
Sawdust dryer is widely used for the drying of straw briquette, charcoal, wood pellet fuel, sawdust briquette, corn straw, soybean straw, cotton stalk, wheat straw, sorghum stalk, wood shavings, sawdust, ginkgo leaf, mulberry leaves, and other fiber materials.
Sawdust dryers are consist of heating furnace, feeding port, drum, filter drum, conveying pipe, cooling drum and discharging port.
A new type of wood chips rotary dryer is shaped as a horizontally inclined rotating cylinder. Wet wood chips are feed at feed port and discharged at the output port. In direct-type rotary dryer (cylinder drier), hot air moves through the cylinder in direct contact with the material in the dryer, either downstream or against the direction of its flow. The wood chips rotary dryer is equipped with scatters equipment, make wood chips fully touched with the hot air, so that has a very good drying effect.
Wood chips rotary dryer is used for drying materials with a certain humidity lightweight material, such as bean dregs, wood chips, cassava dregs, Marc, distiller's grains, and others. Our special design wood chips rotary dryer has a strong adaptability of materials and it can dry various materials. This type of wood chips rotary dryer operation is very simple and liable. Also our professional wood chips rotary dryer has played an important role in various drying industries,wood chips rotary dryer is used for drying materials with humidity or granularity in the industries of mineral dressing, building material, metallurgy, and chemical.wood chips rotary dryer can be used for drying many kinds of materials and with convenient and reliable operation; therefore, it has been widely used.
Wood chips rotary dryer is used for drying materials with a certain humidity lightweight material, such as bean dregs, wood chips, cassava dregs, Marc, distiller's grains, and others. Our special design wood chips rotary dryer has a strong adaptability of materials and it can dry various materials. This type of wood chips rotary dryer operation is very simple and liable. Also our professional wood chips rotary dryer has played an important role in various drying industries,wood chips rotary dryer is used for drying materials with humidity or granularity in the industries of mineral dressing, building material, metallurgy, and chemical.wood chips rotary dryer can be used for drying many kinds of materials and with convenient and reliable operation; therefore, it has been widely used.
This equipment is of a huge production, high efficiency, and energy saving, small floor space. Compared with common dryer machines, it saves energy by 30%-50%, thus saving energy and drying cost to the maximum.
Crops straw dryer is applied for drying barley straw, oat straw, wheat straw, rye straw, straw, sorghum straw, corn straw, potato vines, beanstalks ( including materials like soybean straw, broad bean straw, pea straw, cowpea straw, lupine straw, peanut vine, etc.) According to the characteristic, production capacity, applying requirement, cost control, operating convenience of each biomass material, our company optimizes the drying technology.
Pasture dryer is applied for drying grass, forage, alfalfa, napier grass, elephant grass, ( including materials like energy grass, herbage, lucerne, purple medic, Medicago falcat etc.) According to the characteristic, production capacity, applying requirement, cost control, operating convenience of each biomass materials, our company optimizes the drying technology. Recommended products: three-layer rotary drum dryer, patent number:ZL2009 2 0089749.2. This equipment is of huge production, high efficiency and energy saving, small floor space. Compared with common dryer machines, it saves energy by 30%-50%, thus saving energy and drying cost to the maximum.
Main Features
1) PLC smart control & high automaticity. The performance of rotary dryer and moisture content of dry materials is automatically controlled in stable states.
2) High heat efficiency. The design of multiple circumferential flights combination and flow rate adjustment devices ensure the control of drying period and temperature distribution. The effect of insulation is as high as 70% and raise the heat efficiency by 20%.
3) Four wheel drive, more steady and stable.
4) Save 50% space compared with traditional dryers and reduce 50% civil investment.
5) Convenient variable frequency control systems. Customer could change the material flow rate and product moisture based on their need.
6) Environmental and safe. Modular configuration of dust collection and purification systems
Starch residue is the main by-product of cassava, potato, sweet potato and other agricultural products after the production of starch, moisture content is about 80%, as for high moisture content, heavy viscosity, with the traditional drying process equipment, drying temperature is high, slag starch Gelatinization chemical reaction, dextrin clogging material particles pores, water evaporation does not come out, the particles surface turned yellowish black, "outside the coke within the soft", a serious impact on the sale of dry residue; drying temperature is low, t the moisture cannot drying below 15 % at all, dryer sticky wall, gelatinization, agglomeration, drying equipment can not do normal production,this will lead to the impaired interest of the customers.Dingli brand starch slag dryer is based on the research and development for characteristics of raw material such as cassava, potato slag, and after a few sets of dryer producing experience, which can drying all kinds of potato residue below 10% in one time.
Sludge is the industrial waste generated during the production process of municipal sewage processing. Because sludge has many disadvantages such as high moisture content, high viscosity, high water holding capacity, and low calorific value. It is difficult to achieve industrial utilization. Dingli Company operated a series of technical researches on the current market situation of sludge treatment and the characteristics of sludge in various regions. Dingli Company concentrating created a new generation of sludge rotary drum drying system, drying product moisture can be reduced less than 25%, it totals achieved the standard of sludge landfill and further incineration processing conditions. The technology of equipment gets absolutely mature enough, also it has a stable capacity for operation and very convenient to operate and maintain.
Poultry manure dryer machine is Dingli company according to the market demand professional design and developed one type new rotary dryer,this new type dryer suitable to drying the material moisture content at 50-65%,such as poultry manure,chicken manure, bird manure,sawdust,wood powder,wood chips,wood shaving,barley straw,oat straw, wheat straw,rye straw,rice straw, broom corn straw,The peanut vine,corn straw and other material. Depended on the different characteristics of each type of raw materials, different capacity, application requirements, cost control, automation degree, optimize the drying process technology, working conditions on-site and other things, we can design the drying process.
Dingli Company recommended product: this poultry manure rotary drum dryer unit capacity is larger, high efficient, saving energy, covers area is less, it can saving energy more than 50% than the ordinary dryer, it can maximize saving energy and drying costs.
Single drum rotary dryer as know as a single-cylinder dryer. It is used in food, feed, fertilizer, chemical, pharmaceutical, mining industries. According to the different requirements about the dryer. We have a different heat source. For example, direct heating model hot blast stove, indirect hot blast stove, heat conduction oil, electric heating, steam, etc. This dryer is suitable for drying the material with the moisture of less than 65%.
Product Description
Bean dregs, the by-product of producing soy milk or tofu, is a kind of material with big water and oil combining performance. After being processed, it has the following advantages: fresh bean dregs' water content is about 90%, its nutritional ingredient is higher than many inferior dregs; the crude protein content is high, especially in hot summer and high temperature, it is easily rotted and mildewed. Dry bean dregs' crude protein content is three times higher than that of the unhulled rice. It is suitable for nutrition feed for pig, chicken, duck, etc.
Bean dregs dryer mainly consists of the heat source(hot blast stove or gas producer furnace), material feeder(beater), rotary drying roller, discharger, induced draft fan, driving device, unloader, and power distribution cabinet. After a certain degree of dehydration and scattering, wet bean dregs enters into the drying roller through the material feeder. Under the stirring of the lifting plates and shoveling plates that distribute evenly inside the roller, the bean dregs scatter evenly and contacts with hot air sufficiently in the drying area. This speeds up the drying heat transfer and mass transfer. Wet air is pumped by air-inducing device, which avoids material from being wet again.
Product Description
A new type of wood chips rotary dryer is shaped as a horizontally inclined rotating cylinder. Wet wood chips are feed at feed port and discharged at the output port. In direct-type rotary dryer (cylinder drier), hot air moves through the cylinder in direct contact with the material in the dryer, either downstream or against the direction of its flow. The wood chips rotary dryer is equipped with scatters equipment, make wood chips fully touched with the hot air, so that has a very good drying effect.
Wood chips rotary dryer is used for drying materials with a certain humidity lightweight material, such as bean dregs, wood chips, cassava dregs, Marc, distiller's grains, and others. Our special design wood chips rotary dryer has a strong adaptability of materials and it can dry various materials. This type of wood chips rotary dryer operation is very simple and liable. Also our professional wood chips rotary dryer has played an important role in various drying industries,wood chips rotary dryer is used for drying materials with humidity or granularity in the industries of mineral dressing, building material, metallurgy, and chemical.wood chips rotary dryer can be used for drying many kinds of materials and with convenient and reliable operation; therefore, it has been widely used.
Introduction
The screw sand washing machine uses different particle size and density of particles to have different sedimentation speeds in the fluid. The particles with fine particle size and small density have a slow sedimentation rate, while the particles with large particle size and high density have a fast sedimentation speed, and the dust and The impurities are separated from the sand, and under the uniform agitation of the spiral, the purpose of filtering the water to remove impurities and lifting the transportation is achieved. The spiral sand washing machine has the advantages of a long spiral body, good sealing system, simple structure, strong processing capacity, convenient maintenance, and high washing rate. The spiral sand washing machine is widely used in highways, railways, municipal construction, stone factories, construction sites, concrete prefabrication yards. And a large amount of sand and gravel de-sludge operations by hydropower, and it can also be used for washing, grading and dewatering sand.
Characteristic
1) It can process materials within 0-30mm and can wash the soil and ash powder on the material into clean materials.
2) The machine has the advantages of simple structure, easy maintenance, and high washing efficiency.
3) The gravel is washed thoroughly and washed clean. The gravel rotates inside the spiral drum, and by washing the water stream, it can be said that all the mud adhered to the surface of the gravel is washed away. In this way, the mud content of the crushed stone is zero or only a few tenths of a percent, which ensures the strength of the box girder concrete and ensures the quality of the box girder and the construction progress.
Food waste also called the kitchen waste (commonly known as swill, hogwash, household refuse, pigwash), is the generic terms of leftovers, dining table waste, and kitchen waste. Its main ingredients are rice, flour, starch types, bone, meat, oil, skin, thorn, scales, etc. It richly contains nutrient substances ( such as vitamins, starch, protein, fat, dietary fiber, fatty acid, sugar, salt, etc) and mineral substances (such as calcium, sodium, magnesium, potassium, and iron, etc). Food waste is suitable for being used as feed after being processed.
Product Description
The equipment has the advantages of large production, high efficiency, energy-saving, and small floor area. It can be used together with the clean hot air furnace and suitable for drying high moisture materials such as food residue and so on. The moisture can be dried quickly from 65-75% to 14-18% at a time, and the dry food residue completely retains its original nutritional components, with bright colors and delicate scent. Comparing with the traditional dryer, energy consumption can be reduced by 30-50%, which can save energy and reduce the operating cost.
The dryer is suitable for food residue, oat straw, wheat straw, rye straw, straw, sorghum straw, corn straw, potato vines, beanstalks, etc. Dingli company optimizes the drying technology and equipment selection and configuration service according to the characteristics of each material, the size of production, the quality requirements, the application demand, the cost control, the automatic degree, the field working condition, the investment quota and so on.
Cassava pulp, potato residue is the main by-products of the production of starch, alcohol residue, moisture content is about 80%, as for high moisture content, heavy viscosity, with the traditional drying process equipment, drying temperature is high, slag starch Gelatinization chemical reaction, dextrin clogging material particles pores, water evaporation does not come out, the particles surface turned yellowish black, "outside the coke within the soft", a serious impact on the sale of dry residue; drying temperature is low, the moisture cannot be drying below 15 % at all, dryer sticky wall, gelatinization, agglomeration, drying equipment cannot do normal production,this will lead to the impaired interest of the customers. Dingli brand starch slag dryer is based on the research and development for characteristics of raw material such as cassava, potato slag, and after a few sets of dryer producing experience, which can dry all kinds of potato residue below 10% in one time.
The equipment used by the company's "mechanical dehydration + drum drying + pulse air drying " special Chinese patent technology, an effective solution to the traditional dryer which can not dry cassava, potato residue problems, drying material with perfect color, good quality, production line of energy-saving and environmental protection ,with safe and stable operation,which praised by many new and old customers.
Product Description
Crops straw dryer is applied for drying barley straw, oat straw, wheat straw, rye straw, straw, sorghum straw, corn straw, potato vines, beanstalks ( including materials like soybean straw, broad bean straw, pea straw, cowpea straw, lupine straw, peanut vine, etc.) According to the characteristic, production capacity, applying requirement, cost control, operating convenience of each biomass material, our company optimizes the drying technology. Recommended products: three-layer rotary drum dryer, patent number: ZL2009 2 0089749.2.
This equipment is of a huge production, high efficiency, and energy-saving, small floor space. Compared with common dryer machines, it saves energy by 30%-50%, thus saving energy and drying cost to the maximum.
Product Description
Starchy residue is the main by-product of cassava, potato, sweet potato, and other agricultural products after the production of starchy, moisture content is about 80%, as for the high moisture content, heavy viscosity, with the traditional drying process equipment, drying temperature is high, slag starch has made gelatinization chemical reaction, dextrin clogging material particles pores, water evaporation does not come out, the surface of the particles turned yellowish black, "outside the coke within the soft", a serious impact on the sale of dry residue; drying temperature is low, the moisture cannot be drying below 15 % at all, dryer sticky wall, gelatinization, agglomeration, drying equipment cannot do normal production, this will lead to the impaired interest of the customers. Dingli brand starch slag dryer is based on the research and development for characteristics of raw material such as cassava, potato slag, and after a few sets of dryer producing experience, which can dry all kinds of potato residue below 10% in one time.
The equipment used by the company's "mechanical dehydration + drum drying + pulse air drying " Chinese patent technology, an effective solution to the traditional dryer which can not dry cassava, potato residue problems, drying material with perfect color, good quality, production line of energy-saving and environmental protection ,with safe and stable operation,which praised by many new and old customers.
Product Description
Paddle stirring rotary dryer is as know as the paddle-harrow rotary dryer. The paddle rotary dryer sets high-speed spinning paddles, strengthening the crushing, and separating function. The crushing effect enlarges the contact surface of particles, which largely increases the heat transfer rate and vaporization rate. According to the practical test, the unit vaporization capacity per hour of paddle rotary dryer is as much as 25-60kg/m2, which is 1-2 times of traditional rotary dryer. The output is raised by 50% and fuel consumption is reduced by 30%. At the same time, the footprint and drying efficiency is raised by 40%.
It is applicable for the drying process of high-moisture materials with 50%-85% moisture, such as sludge, bean dregs, starch residue, and sauce residue, spray corn bran, cassava dregs, brewer's grains, distiller's grains, straw, grass, organic fertilizer, chicken beef feces. We also help optimize the drying process according to the property of different biomass materials, production scale, application requirements, cost control, automation level, and site condition.
Principle
The crushed materials of which the moisture is about 50%-85% are sent into the roller conveyor to realize downstream drying. Under the effect of the inner shoveling plate, materials are taking and scattered constantly, and move in the spiral forward method. Through three layers (inner, middle and outer layer). The heat exchange is realized between material and hot air.
Product Description
Based on years of experience in the comprehensive moisture treatment of high-humidity materials, Dingli Company can dehydrate, dry, crush, pack, etc. all kinds of sauce residue with water content up to 80%. The process is used up to 12% or less for feed utilization. Our company's sauce slag dryer technology is a national patented technology. The equipment is equipped with special dehydration, temperature regulation, lifting material, guiding material, and scattering device, which effectively avoids sticking and clogging. The dried materials have good color, good quality, energy-saving, and environmental protection, and are well received by new and old customers.
Working Principle
The sauce residue dryer can quickly dry the salt residue of 65-75% with water to a dry product with a moisture content of less than 13%. The unit uses coal (natural gas, gas) as energy, uses hot air as drying medium, uses strong hot air to heat all kinds of wet materials, and adopts electromagnetic speed regulation, and is equipped with electromagnetic speed regulation. The automatic temperature control device keeps the color of the dry product after drying and retains the color and nutrients of the original material.
Introduction
The screw sand washing machine uses different particle size and density of particles to have different sedimentation speeds in the fluid. The particles with fine particle size and small density have a slow sedimentation rate, while the particles with large particle size and high density have a fast sedimentation speed, and the dust and The impurities are separated from the sand, and under the uniform agitation of the spiral, the purpose of filtering the water to remove impurities and lifting the transportation is achieved. The spiral sand washing machine has the advantages of a long spiral body, good sealing system, simple structure, strong processing capacity, convenient maintenance, and high washing rate. The spiral sand washing machine is widely used in highways, railways, municipal construction, stone factories, construction sites, concrete prefabrication yards. And a large amount of sand and gravel de-sludge operations by hydropower, and it can also be used for washing, grading and dewatering sand.
Environmental protection continuous type drum carbonization furnace is suitable for woodiness materials which containing carbon (volume below 15mm granular), such as coconut shell, apricot shell, hemp stalk, sawdust, rice husk, bamboo, eucalyptus, mushroom residue, furfural residue, coffee grounds, palm shell, peanut shell, walnut shell. It is the better machine for dry distillation and anaerobic carbonization under high temperature and the carbonization rate is high.
The advanced technology of recovering, purifying and circulating combustion of combustible gases such as carbon monoxide, methane and produce smoke lead the carbonization process is adopted reasonably. It not only solves the problem that the ordinary carbonization furnace produce smoke lead the environmental pollution, and also solves the problem of heat required, fully achieve the self-sufficient, improves the continuity and economy of the equipment, make full use of agricultural and forestry residues, make it treasure, and make more contributions for the greening of the environment.
Product Description
Small movable type kitchen waste dehydrator, widely used in kitchen waste dehydration processing job, convenient using, simple operation, flexible moving, is the chiefly product for family kitchen waste treatment, is a special design and manufacturing from Dingli company for customers' kitchen waste treatment needs.
This equipment adopts mechanical dehydration mode, greatly reduces material drying process load, improves capacity a lot, significantly reduces energy consumption, is necessary equipment of a small amount of food residue treatment.
Principle
After start the small mobile type kitchen waste dehydrator, the kitchen waste that need dehydration uniformly feeding from material feeding box, material move toward the discharging end in axial direction under the pushing of spiral rotating blade, under the big pressure effect of changed screw pitch, crew and adjustment damper, material complete the mechanical dehydration work. Water content goes through the screen and discharges at the outlet port, the dehydrated material discharge at the discharging box. To the difference of material type and changing of capacity all can be realized by adjusting the dehydrator, to achieve coordination between dewatering and production.
Product Description
Spent Grain Screw Dewatering Machine can be used for the dehydration of beer spent grain, vinegar grain, and other materials, and can remove about 20% of the water in the material.
Principle
The spent grain dewatering machine is designed according to the superposition compression principle, and mainly achieves the purpose of material water separation by the cooperation of the feeding box, the screw shaft, the screen mesh, and the tail cone. The material to be treated is uniformly conveyed to the feed bin of the screw extrusion dewatering machine by a tool such as a screw conveyor, and is filtered by the spiral blade and filtered by the screen, and the water or juice flows through the screen to the water tray under the machine to collect. After being taken up by the pipeline, the dehydrated finished material is output through the conveyor belt.
Lignite is a kind of low-grade coal, which is formed by peat diagenetic formation of humic coal, its the lowest degree of coalification, always present brown, dark brown, dim or asphalt luster color, no cohesive. Its physical and chemical properties are between peat and bituminous coal. High water content, high volatile, low density, containing humic acid, oxygen content up to 15 ~ 30%, easy to fragmentation, spontaneous combustion in the air. According to China's coal classification standards, they are divided into two categories: light transmittance PM 30 ~ 50% of the old lignite and PM less than or equal to 30% of the young lignite. Chinese and Indonesian lignite are mostly old lignite.
Dingli New Energy Technology Co., Ltd. engaged in coal, slime drying industry for many years, through the physical and chemical properties of lignite and lignite drying temperature, pressure, wind speed, oxygen content and other related parameters study,we established the lignite drying Machine test base in Inner Mongolia, after the company's technology research and development for a number of experimental demonstration, successfully developed lignite drying upgrading of lignite dryer equipment. Our lignite dryer can reduce the moisture content of lignite 25-60% to 15-30%, and the calorific value of treated coal can be increased by 30-40%. It is directly used as a substitute for bituminous coal or anthracite power plant use. The technology and equipment through the practice in Inner Mongolia, Yunnan, Xinjiang, and Indonesia, safe and stable, energy-saving and environmental protection, with great market potential for a variety of lignite mining enterprises.
Bean dregs dewatering machine is suitable for the dehydration of cassava residue, potato residue, soybean residue, food residue, sweet potato residue, tea residue, beer residue, waste residue and other materials with high moisture content.
Transport material with moisture of 80%-90% to material hopper of dehydrator by conveyor, uniformly lay the material onto filter belt by spiral material distributing device, the filter belt move with equipment running, limiting plate scrape flatly the material layer, make the material thickness completely uniform and accordance; then high and low two complete tensioning annular filter belt clamp the material layer, drive by driving roller, the double roller of dehydration area continuously and repeatedly press by mechanical, remove large amount water content, moisture content after dehydration is 65-70%.
Automatically adjust extrusion force according to material features, satisfy customers` material moisture requirements. Equipment intelligent operation, 24 hours continuous automatic running, low labor working strength.
The forage dewatering machine is suitable for the dehydration treatment of forage, elephant grass, alfalfa, and other materials.
The forage screw dewatering machine is designed according to the superposition compression principle, and the purpose of separating the material water is mainly achieved by the cooperation of the feeding box, the screw shaft, the screen mesh, and the tail cone. The material to be treated is uniformly conveyed to the feed bin of the screw extrusion dewatering machine by a tool such as a screw conveyor, and is filtered by the spiral blade and filtered by the screen, and the water or juice flows through the screen to the water tray under the machine to collect. After being taken up by the pipeline, the dehydrated finished material is output through the conveyor belt.
Spent Grain Screw Dewatering Machine can be used for the dehydration of beer spent grain, vinegar grain, and other materials, and can remove about 20% of the water in the material.
The spent grain dewatering machine is designed according to the superposition compression principle, and mainly achieves the purpose of material water separation by the cooperation of the feeding box, the screw shaft, the screen mesh, and the tail cone. The material to be treated is uniformly conveyed to the feed bin of the screw extrusion dewatering machine by a tool such as a screw conveyor, and is filtered by the spiral blade and filtered by the screen, and the water or juice flows through the screen to the water tray under the machine to collect. After being taken up by the pipeline, the dehydrated finished material is output through the conveyor belt.
Bean dregs dryer mainly consists of the heat source(hot blast stove or gas producer furnace), material feeder(beater), rotary drying roller, discharger, induced draft fan, driving device, unloader, and power distribution cabinet.
After a certain degree of dehydration and scattering, wet bean dregs enters into the drying roller through the material feeder. Under the stirring of the lifting plates and shoveling plates that distribute evenly inside the roller, the bean dregs scatter evenly and contacts with hot air sufficiently in the drying area. This speeds up the drying heat transfer and mass transfer. Wet air is pumped by air-inducing device, which avoids material from being wet again.
The flash dryer is widely used in the dispersion and drying of granular, powdery, paste-like and filter cake-like false agglomerates in the chemical, pharmaceutical, building materials, food, feed, and other industries. The flash dryer has the advantages of the small occupied area, low energy consumption, high thermal efficiency, and continuous mass production. The flash dryer body is provided with a rotary cutting device, and the dry material is subjected to shearing, rotating, collision, friction, etc., so that the material is pulverized and refined, and is highly dispersed, thereby achieving the effect of efficiently and rapidly evaporating water. The dryer is equipped with an air filter to achieve the cleanliness of the hot air and to provide production conditions for the hygiene requirements of the food industry. The machine sets the cyclone separation and collecting materials. In addition, the bag dust removal receipt is added to increase the material recovery rate. It can improve the economic efficiency of enterprises. The dryer can be customized according to user needs.
Product Description
Paddle stirring rotary dryer is as know as the paddle-harrow rotary dryer. Zhengzhou Dingli New Energy Technology Co., Ltd according to the requirement of the market, and problems of traditional rotary dryer designs and manufactures paddle stirring rotary dryer. It solves the problem that the traditional dryer is not suitable for high humidity materials with MC higher than 50% and relatively low viscosity. Meanwhile since the black hole phenomenon occurring in the drum lowers the drying capacity and raises the energy consumption. The paddle rotary dryer sets high-speed spinning paddles, strengthening the crushing, and separating function. The crushing effect enlarges the contact surface of particles, which largely increases the heat transfer rate and vaporization rate. According to the practical test, the unit vaporization capacity per hour of paddle rotary dryer is as much as 25-60kg/m2, which is 1-2 times of traditional rotary dryer. The output is raised by 50% and fuel consumption is reduced by 30%. At the same time, the footprint and drying efficiency is raised by 40%.
It is applicable for the drying process of high-moisture materials with 50%-85% moisture, such as sludge, bean dregs, starch residue, and sauce residue, spray corn bran, cassava dregs, brewer's grains, distiller's grains, straw, grass, organic fertilizer, chicken beef feces. We also help optimize the drying process according to the property of different biomass materials, production scale, application requirements, cost control, automation level, and site condition.
Principle
The crushed materials of which the moisture is about 50%-85% are sent into the roller conveyor to realize downstream drying. Under the effect of the inner shoveling plate, materials are taking and scattered constantly, and move in the spiral forward method. Through three layers (inner, middle and outer layer). The heat exchange is realized between material and hot air.
The Screw sand washing machine utilizes the buoyancy action of water to separate dust and impurities from the sand. It through the agitation of the screw blades, the purpose of filtering water is removing impurities. The screw sand washing machine a settling tank at the bottom of the slope installation of the water tank. The screw head sinks to the settling tank. The screw is rotated by the motor through the reducer driven, and the cleaning water is supplied from the bottom of the settling tank to complete the cleaning, dehydration, and classification. The machine rotor adopts a central structure, and the spiral blade is mounted on the central shaft and is connected to the central shaft by the reducer for work. An apparatus for mechanical grading by virtue of the fact that the specific gravity of the solid particles is different and thus the rate of sedimentation in the liquid is different.
Principle
The screw sand washing machine uses different particle size and density of particles to have different sedimentation speeds in the fluid. The particles with fine particle size and small density have a slow sedimentation rate, while the particles with large particle size and high density have a fast sedimentation speed, and the dust and The impurities are separated from the sand, and under the uniform agitation of the spiral, the purpose of filtering the water to remove impurities and lifting the transportation is achieved. The spiral sand washing machine has the advantages of a long spiral body, good sealing system, simple structure, strong processing capacity, convenient maintenance, and high washing rate. The spiral sand washing machine is widely used in highways, railways, municipal construction, stone factories, construction sites, concrete prefabrication yards. And a large amount of sand and gravel de-sludge operations by hydropower, and it can also be used for washing, grading and dewatering sand.
Sand dryer is also known as the three layers of drum dryer, three return cylinder dryers, on the basis of the single-cylinder dryer, developed and manufactured, which is an industrial dryer on non-viscous, liquid material. At present three-cylinder dryer made by Dingli company, with mature technology, through the drying of the sand, fly ash, coal, mineral materials, slag and other material, the effect is very good.
Principle
The sand is conveyed to silo by belt conveyor or bucket elevator, and transport to the feed end by the feeder of the silo. The inclination of the feeding pipeline should exceed the natural inclination of materials so that to facilitate sand flowing into the dryer smoothly. The rotating cylinder of the dryer is slightly inclined to the horizon. To feed the material from the higher end and the heat carrier enter from the lower end, such produce adverse contact between them .sometimes, they can be fed to the cylinder together. As the cylinder running, the sand carried to the lower side by gravity. In the process of moving forward, the wet raw material being roasted by the heat directly or indirectly to make the raw material to dry quickly, the final products discharge out by belt conveyor or screw conveyor. There is a shoveling plate installed in the dryer with the function of shoveling the materials up and down, to enlarge the contact area between airflow and materials and to enhance the efficiency and make the material running quickly. The heat carrier is hot air, the flue gas, etc. After the dryer process, It needs a cyclone dust collector to catch the items in the airflow. You should use a bag type or wet-type dust collector and afterward discharge the waste gas if you intend to further reduce the dust load of the exhaust.
Zhengzhou DINGLI New Energy Technology Co., Ltd. is currently the most professional and most authoritative enterprise engaged in the research and development of drying equipment in China. It is the only science and technology enterprise in China's drying industry that integrates design, production, and sales. After nearly 20 years Fast and steady development has gradually become the leader of the Chinese drying equipment industry. The dryer for slag, slag, and other materials has been meticulously researched and developed. After more than 20 years of drying practice and researches, it has been continuously improved. With its advanced technology, high efficiency, low energy consumption, stable operation, and easy operation and maintenance, safety and environmental protection, praised by users, more than 100 sets of drying equipment are perfectly operating in China and around the world.
This type of equipment is widely used in cement, mining, building materials, chemicals, food, metallurgy, chemical, fertilizer production, slag, clay, and other industries. The equipment can be customized according to the type of material, depth of precipitation and user needs to meet the individual needs of each user.
The slurry-residue dying machine can quickly dry the slurry-residue with 65% to 75% moisture into the product with only 13% water. Coal (or biomass, natural gas, coal gas) is used as the main fuel to warm the air as a medium. The high-temperature airflow will dry different kinds of materials in a short time. Electromagnetic speed adjustment system is used as a transmission system, along with the automatic temperature controller. The product will maintain the original color, quality, taste and nutrient contents after being dried.
Principle
Material Processing Procedure: The material with about 60% to 75% water will be transmitted into the stirring drum dryer by screw conveyor to be concurrently dried. The material will be raised, spread and then moved helically. It will be fully stirred and scattered by the internal stirring blades, and then warmed up, dehydrated and transmitted out of the drum.
Product Description
It is used for beer waste, white wine grains and other high-humidity slag pressure filtration dehydration, strong dehydration, low power consumption, long service life, dehydrator manufacturer price is affordable, is the main equipment to achieve dehydration of winery waste.
Principle
The material passes through the conveyor, transported to the hopper of the dewatering machine, and evenly laid on the filter belt through the auger. The filter belt is leveled by the height of the material layer with the operation of the equipment so that the thickness of the material is completely uniform. Then, the upper and lower two ring-shaped filter belts are completely clamped, and the material layer is clamped by the driving roller, and the pair of rollers in the dewatering zone is mechanically pressed for several times to press out a large amount of water. According to the characteristics of the material, the extrusion force is automatically adjusted to meet the customer's requirements for material moisture.
Product Description
Coconut Peat Belt Type Dewatering Machine suitable for dehydration of coconut peat, coconut coir, coco pith, coconut chaff, and other material.
Principle
Transport material with moisture of 80%-90% to material hopper of dehydrator by conveyor, uniformly lay the material onto the filter belt by spiral material distributing device, the filter belt move with equipment running, limiting plate scrape flatly the material layer, make the material thickness completely uniform and accordance; then high and low two complete tensioning annular filter belt clamp the material layer, drive-by driving roller, the double roller of dehydration area continuously and repeatedly press by mechanical, remove large amount water content, moisture content after dehydration is 65-70%.
Automatically adjust extrusion force according to material features, satisfy customers` material moisture requirements. Equipment intelligent operation, 24 hours continuous automatic running, low labor working strength.
Pasture dryer is applied for drying grass, forage, alfalfa, napier grass, elephant grass, ( including materials like energy grass, herbage, lucerne, purple medic, Medicago falcat etc.) According to the characteristic, production capacity, applying requirement, cost control, operating convenience of each biomass materials, our company optimizes the drying technology. Recommended products: three-layer rotary drum dryer, patent number:ZL2009 2 0089749.2. This equipment is of huge production, high efficiency and energy saving, small floor space. Compared with common dryer machines, it saves energy by 30%-50%, thus saving energy and drying cost to the maximum.
Starch residue is the main by-product of cassava, potato, sweet potato and other agricultural products after the production of starch, moisture content is about 80%, as for high moisture content, heavy viscosity, with the traditional drying process equipment, drying temperature is high, slag starch Gelatinization chemical reaction, dextrin clogging material particles pores, water evaporation does not come out, the particles surface turned yellowish black, "outside the coke within the soft", a serious impact on the sale of dry residue; drying temperature is low, t the moisture cannot drying below 15 % at all, dryer sticky wall, gelatinization, agglomeration, drying equipment can not do normal production,this will lead to the impaired interest of the customers.Dingli brand starch slag dryer is based on the research and development for characteristics of raw material such as cassava, potato slag, and after a few sets of dryer producing experience, which can drying all kinds of potato residue below 10% in one time.
JHD series yeast rotary dryer is one kind of single shell dryer that can be used in the drying process of a variety of slurries, especially suitable for the recycling of brewers yeast. We have yeast dryer products of different configurations to meet the demand of the annual output from fifty thousand tons to three hundred thousand tons. This machine is suitable for the drying process of food, chemical, pharmaceutical, and other industries.
Principle
Our brewers' yeast dryer product takes advantage of heat conduction between hot steam and wet materials, realizing the indirect drying process. The drum is a hollow metal cylinder whose surface is deeply processed to be clean and polished. The drum rotates to the axial underdrive devices (gear drive) at an adjustable rate. The slurry is preheated to 0 in the preheating tank and then delivered to feeding chute through the pump.
Product Description
Based on years of experience in the comprehensive moisture treatment of high-humidity materials, Dingli Company can dehydrate, dry, crush, pack, etc. all kinds of sauce residue with water content up to 80%. The process is used up to 12% or less for feed utilization. Our company's sauce slag dryer technology is a national patented technology. The equipment is equipped with special dehydration, temperature regulation, lifting material, guiding material, and scattering device, which effectively avoids sticking and clogging. The dried materials have good color, good quality, energy-saving, and environmental protection, and are well received by new and old customers.
Working Principle
The sauce residue dryer can quickly dry the salt residue of 65-75% with water to a dry product with a moisture content of less than 13%. The unit uses coal (natural gas, gas) as energy, uses hot air as drying medium, uses strong hot air to heat all kinds of wet materials, and adopts electromagnetic speed regulation, and is equipped with electromagnetic speed regulation. The automatic temperature control device keeps the color of the dry product after drying and retains the color and nutrients of the original material.
Product Description
Small movable type kitchen waste dehydrator, widely used in kitchen waste dehydration processing job, convenient using, simple operation, flexible moving, is the chiefly product for family kitchen waste treatment, is a special design and manufacturing from Dingli company for customers' kitchen waste treatment needs.
This equipment adopts mechanical dehydration mode, greatly reduces material drying process load, improves capacity a lot, significantly reduces energy consumption, is necessary equipment of a small amount of food residue treatment.
Principle
After start the small mobile type kitchen waste dehydrator, the kitchen waste that need dehydration uniformly feeding from material feeding box, material move toward the discharging end in axial direction under the pushing of spiral rotating blade, under the big pressure effect of changed screw pitch, crew and adjustment damper, material complete the mechanical dehydration work. Water content goes through the screen and discharges at the outlet port, the dehydrated material discharge at the discharging box. To the difference of material type and changing of capacity all can be realized by adjusting the dehydrator, to achieve coordination between dewatering and production.
A new type of wood chips rotary dryer is shaped as a horizontally inclined rotating cylinder. Wet wood chips are feed at feed port and discharged at the output port. In direct-type rotary dryer (cylinder drier), hot air moves through the cylinder in direct contact with the material in the dryer, either downstream or against the direction of its flow. The wood chips rotary dryer is equipped with scatters equipment, make wood chips fully touched with the hot air, so that has a very good drying effect.
Wood chips rotary dryer is used for drying materials with a certain humidity lightweight material, such as bean dregs, wood chips, cassava dregs, Marc, distiller's grains, and others. Our special design wood chips rotary dryer has a strong adaptability of materials and it can dry various materials. This type of wood chips rotary dryer operation is very simple and liable. Also our professional wood chips rotary dryer has played an important role in various drying industries,wood chips rotary dryer is used for drying materials with humidity or granularity in the industries of mineral dressing, building material, metallurgy, and chemical.wood chips rotary dryer can be used for drying many kinds of materials and with convenient and reliable operation; therefore, it has been widely used.
Crops straw dryer is applied for drying barley straw, oat straw, wheat straw, rye straw, straw, sorghum straw, corn straw, potato vines, beanstalks ( including materials like soybean straw, broad bean straw, pea straw, cowpea straw, lupine straw, peanut vine, etc.) According to the characteristic, production capacity, applying requirement, cost control, operating convenience of each biomass material, our company optimizes the drying technology. Recommended products: three-layer rotary drum dryer, patent number: ZL2009 2 0089749.2.
This equipment is of a huge production, high efficiency, and energy-saving, small floor space. Compared with common dryer machines, it saves energy by 30%-50%, thus saving energy and drying cost to the maximum.
Product Description
This machine is suitable for all kinds of agricultural and forestry biomass charring making. For example, wood shavings, sawdust, wood chip, rice husk, cotton stalk, crop straw, bean curd, etc
Principle
The carbonation temperature can reach 600 to 900. According to the material characteristics, the temperature can be adjusted. The capacity respectively are 1000kg/h, 1500 kg/h, 2000kg/h, 3000kg/h (The different production caused by different material characteristics)
Conduct oil heat (steam) drying drum dryer belongs to indirect heating mode, the heat conduction oil or steam drying heat, this type of dryer has low energy consumption of drying, the safety drying process, the material is not affected by heat source pollution, etc., which are widely used in the biomass, food, feed, fertilizer, bad slag chemical industry, medicine, coal, mining, and other small particles or weakly caking dry powder material.
Product Application
Zhengzhou Dingli New Energy Technology Co., Ltd is the most professional, most authoritative enterprise in china, which is engaged in coal drying equipment research and development, which is the only Chinese coal slime drying industry set design, production, sales in the integration of science and technology enterprises. After nearly 20 years of rapid development,Dingli has gradually become the first brand of drying equipment industry in China .Company based on the lignite, washed coal such high moisture content coal, with the carefully technical research and practice, developed the coal rotary drying drum system,After 20 years drying experience and constantly improvement in the equipment design, with its advanced technology, high efficiency, low energy consumption, stable operation, convenient operation and maintenance, security, environmental protection,the product are well received by users, more than 100 sets of coal drying equipment running in China and all over the world. This type of equipment can be used for drying all kinds of coal, lignite, carbocoal, including anthracite, lean coal and poor lean coal, lean coal, coking coal, fat coal, air fertilizer coal, gas coal, coal and weakly caking coal, not sticky coal, long flame coal, lignite, coal washing, screening, raw coal, bituminous coal,the tail coal, middling coal etc. Equipment can be made according to the customers'
Lignite is a kind of low-grade coal, which is formed by peat diagenetic formation of humic coal, its the lowest degree of coalification, always present brown, dark brown, dim or asphalt luster color, no cohesive. Its physical and chemical properties are between peat and bituminous coal. High water content, high volatile, low density, containing humic acid, oxygen content up to 15 ~ 30%, easy to fragmentation, spontaneous combustion in the air. According to China's coal classification standards, they are divided into two categories: light transmittance PM 30 ~ 50% of the old lignite and PM less than or equal to 30% of the young lignite. Chinese and Indonesian lignite are mostly old lignite.
Sawdust dryer is used for pellet sawdust or powder sawdust. Wet materials are continuously sent into the drum through a screw conveyor and then get separated and pushed by the high-speed hot flow. The moisture in wet materials is taken away in this process and then we get powder or pellet dry materials.
Sawdust dryer is widely used for the drying of straw briquette, charcoal, wood pellet fuel, sawdust briquette, corn straw, soybean straw, cotton stalk, wheat straw, sorghum stalk, wood shavings, sawdust, gingko leaf, mulberry leaves, and other fiber materials.
Sawdust dryers are consist of heating furnace, feeding port, drum, filter drum, conveying pipe, cooling drum and discharging port.
Biomass ring-die pellet mill is a nationally pioneering product designed by the technical team from Dingli. The design of the molds is unique. The press rollers are made of wear-resistant alloy material, The working life of wearing parts is several times of similar products. Transmission structure can realize the automatic filtering process of grease. This product with unique design, proper structure, low energy cost, and strong wear resistance, which fills the domestic technical blank of vertical ring-die pellet feeding equipment. This palletization equipment is applicable to materials that are difficult to mold and bond, such as rice husk, sunflower seed husk, and peanut shell, branch, trunk, wood rind, crop straw, rubber, cement, ash, and other chemical materials. The pelletized product can be used in the biomass fuel plant, power plants, timber processing plants, fertilizer plant, and chemical plants. This product is a satisfying compression molding equipment with low capital cost, quick profits, and free risk.
Biomass briquetting machine is also called briquettes or straw briquetting machine. The briquetting equipment is suitable for the fluffy material such as straw and sawdust that can be produced a high density of biomass briquette. Straw briquetting needs the ensilage machine or rubbing machine to crushing to the length of 20 ~ 50 mm material. Through extreme pressure, the briquette is formed. The density of briquette is 0.7 ~ 1.2 g/cm3. The benefit of briquette is convenient to transportation, save and usage. Straw briquette overcomes the lightweight, large volume, and easily affected by environmental conditions such as rain or snow fire. It can be satisfied with the demand of the commercialization, which can be sold as fuel or animal feed. Biomass briquettes production line included feeding conveyor, briquettes, and discharging machine, and the operation of distribution cabinets. While, the briquetting machine included equipment rack, motor, feeding port, transmission system, pressure roller, horizontal ring die, discharging port and other parts.
The straw, grass, and wood chips put into cutting or grinding machine to be fiber. The fiber length less than 50mm. The moisture content is between 12% and 25%. The feeding conveyor sends material into the feed port. Through the spindle rotation to drive the roller rotation, and then through the rotation of the roller, the material was extruded by nubby shape from the horizontal hole. and falling the discharging port. The model hole can be a square or circular ring.
Product Description
As Chinese coal slime drying industry set design, production, sales in the integration of science and technology enterprises. After nearly 20 years of rapid development, Dingli has gradually become a steadily drying equipment industry in China and the first brand of the company. Company based on the current coal, blue carbon industry market, technical research and practice, case study, developed the coal chemical industry of coal, blue carbon drying drum system before carbonization,which also often used in LAN charcoal half coke dry quenching cooling, recycling heat energy, or used in LAN charcoal carbon coal cooling and dry raw material coal series to use, fully recycled hot charcoal carbon coal heat, as raw material to the depth of coal moisture removal. This set of equipment technology is advanced, stable running, convenient operation and maintenance.
This type of equipment available to dry all kinds of coal, carbon coal, charcoal, anthracite coal, lean coal, lean coal, coking coal, fat coal, air fertilizer in coal, gas coal, coal and weakly caking coal, not sticky coal, long flame coal, lignite, coal washing, screening, raw coal, bituminous coal, the tail coal, etc. Equipment can be made according to the customers' requirements.
Product Description
1. Abandon the assembled framework hydraulic old traditional press machine, because for a long term using, the problems of guide instability in process of pressing, inaccurate pressing of the upper mold and lower mold and deformation of the framework, come out with the framework press machine in long-term high pressure and high temperature.
2. We adopt the 3 beam Four-Column Guide Device structure, which solved the problems of guide instability and the deformation of the framework.
3. We adopt the design of crossbeam, which solved the problem of press inaccuracy of the upper and lower mold.
4. With Pallet Machinerys new technology, problems of the edge burrs have been completely solved. Workers operate grinders to remove burrs, which has become history.
Product Description
It is used for beer waste, white wine grains and other high-humidity slag pressure filtration dehydration, strong dehydration, low power consumption, long service life, dehydrator manufacturer price is affordable, is the main equipment to achieve dehydration of winery waste.
Principle
The material passes through the conveyor, transported to the hopper of the dewatering machine, and evenly laid on the filter belt through the auger. The filter belt is leveled by the height of the material layer with the operation of the equipment so that the thickness of the material is completely uniform. Then, the upper and lower two ring-shaped filter belts are completely clamped, and the material layer is clamped by the driving roller, and the pair of rollers in the dewatering zone is mechanically pressed for several times to press out a large amount of water. According to the characteristics of the material, the extrusion force is automatically adjusted to meet the customer's requirements for material moisture.
Sand has no unique advantages in nature, but it has a wide range of uses after being dried by a sand dryer. River sand, yellow sand, sea sand, etc., these sands are divided according to the size of different particles, the particle size is different, the purpose of the sand is also completely different. There is no way to divide the sand when it is wet. At this time, you need to use a dryer to dry the sand and enter it into the linear vibrating screen. Through different screen meshes, the size of the sand is divided and stored separately.
Coconut Peat Belt Type Dewatering Machine suitable for dehydration of coconut peat, coconut coir, coco pith, coconut chaff, and other material.
Transport material with moisture of 80%-90% to material hopper of dehydrator by conveyor, uniformly lay the material onto the filter belt by spiral material distributing device, the filter belt move with equipment running, limiting plate scrape flatly the material layer, make the material thickness completely uniform and accordance; then high and low two complete tensioning annular filter belt clamp the material layer, drive-by driving roller, the double roller of dehydration area continuously and repeatedly press by mechanical, remove large amount water content, moisture content after dehydration is 65-70%.
Automatically adjust extrusion force according to material features, satisfy customers` material moisture requirements. Equipment intelligent operation, 24 hours continuous automatic running, low labor working strength.
Soybean meal is a byproduct from the process of soybean oil extraction, which is mainly composed of protein (40% ~ 44%), fat (1% ~ 2%), carbohydrate (10% ~ 15%), and a variety of minerals, vitamins, and essential amino acids. Its nutrition is relatively comprehensive and balanced. In addition, soybean meal also contains soy isoflavones, phospholipids, and other bioactive substances, which is the most widely used plant-based protein resources. However, there are many kinds of antinutritional factors in soybean meal (trypsin inhibitors, soybean protein antigen, urease, phytic acid, etc.). On one hand, their existence has an inhibition effect on certain digestive enzymes when they are combined with some nutrient component and forms the production that is difficult to digest and absorb. On the other hand, some of them can cause organ damage to animals and leave a bad influence on health and growth. Fermented soybean meal, also known as the microorganism fermented soybean meal the produced under controlled conditions, making use of microbial growth, reproduction and metabolism and the accumulation of useful enzyme and intermediate metabolites of bacteria. Through the microbial fermentation, the fermented soybean meal contains little antinutritional factors and is rich in small molecule soybean peptide, amino acids, enzymes, vitamin and bioactive factors, which has good palatability. It can be applied to piglets feeding, poultry feeding, and aquaculture. It is ideal for alternatives to the fish meal with huge market potential and economic value.
Hammer mill could crush straws into canicaceous materials, which can be processed to feedings and biomass fuel. Compared to traditional fuel, biomass fuels have the same volume calorific value and the features of strong combustion, long burning time and quick ignition, which is another ideal replacement of traditional fuels.
Principle
Hammer mill could crush straws into canicaceous materials, which can be processed to feedings and biomass fuel. Compared to traditional fuel, biomass fuels have the same volume calorific value and the features of strong combustion, long burning time and quick ignition, which is another ideal replacement of traditional fuels.
Product Introduction
Crops straw dryer is applied for drying barley straw, oat straw, wheat straw, rye straw, straw, sorghum straw, corn straw, potato vines, beanstalks ( including materials like soybean straw, broad bean straw, pea straw, cowpea straw, lupine straw, peanut vine, etc.) According to the characteristic, production capacity, applying requirement, cost control, operating convenience of each biomass material, our company optimizes the drying technology. Recommended products: three-layer rotary drum dryer, patent number: ZL2009 2 0089749.2.
Product Features
This equipment is of a huge production, high efficiency, and energy saving, small floor space. Compared with common dryer machines, it saves energy by 30%-50%, thus saving energy and drying cost to the maximum.
Product Configuration
Crops straw dryers are consist of heating furnace, feeding port, drum, filter drum, conveying pipe, cooling drum and discharging port.
Ring die pellet mills are widely used in the granulation of wood, straw, and other biomass sources. Driven by heavy-duty gearbox construction, it can work continuously in even most adverse conditions. The imported key elements are of high performance with long life and low maintenance cost. The key parts of the ring die pellet mill are made of alloyed steel that is very strong and malleable. Ring die pellet mills die is made of stainless steel. Our ring dies pellet mills capacity ranges are from 200kgs to10T per hour.
Product Introduction
The sawdust dryer is used for pellet sawdust or powder sawdust. Wet materials are continuously sent into drum through screw conveyer and then get separated and pushed by high-speed hot flow. The moisture in wet materials is taken away in this process and then we get powder or pellet dry materials.
Product Application
Sawdust dryer are widely used for the drying of straw briquette, charcoal, wood pellet fuel, sawdust briquette, corn straw, soybean straw, cotton stalk, wheat straw, sorghum stalk, wood shavings, sawdust, gingko leaf, mulberry leaves and other fiber materials.
Product Configuration
Sawdust dryers are consist of heating furnace, feeding port, drum, filter drum, conveying pipe, cooling drum and discharging port.
The sawdust dryer is used for pellet sawdust or powder sawdust. Wet materials are continuously sent into drum through screw conveyer and then get separated and pushed by high-speed hot flow. The moisture in wet materials is taken away in this process and then we get powder or pellet dry materials.
Sawdust dryer are widely used for the drying of straw briquette, charcoal, wood pellet fuel, sawdust briquette, corn straw, soybean straw, cotton stalk, wheat straw, sorghum stalk, wood shavings, sawdust, gingko leaf, mulberry leaves and other fiber materials.
Poultry Waste such as chicken manure, cow dung, pig feces, livestock manure, etc.
The dryer is suitable for chicken manure, cow dung, feces organic fertilizer, sludge, bean dregs, starch residue, sauce residue, sprayed corn kernels, cassava residue, beer distiller's grains, lees, straw, pasture and other 50-85% moisture content of material Drying. All of our drying process technology according to the characteristics of each biomass material, the size of production, the application requirements, the cost control, the degree of automation, the site conditions, etc.
Dingli company research and development the coconut fiber dryers, direct docking coconut fiber separator, dry shredded coconut, coconut chaff sorting, desalting and dewatering and drying a complete process within 40 minutes. It is energy conservation and environmental protection. The quality of coconut and coconut chaff can be guaranteed. After high-temperature treatment, coconut pith and coconut fiber get cleaner. The production line of the necessary equipment for the coconut pith and coconut fiber is mechanized with large-scale and intensive production.
Brewers Grains are major by-products in the beer production. However, high moisture (80-85%) brings a lot of problems in utilization and transportation. Today the best way to solve this problem is to dehydrate Brewer's Grains and transfer them into composite feed, which could be effectively absorbed. Besides the nutrient in Brewer's Grains will not lose in the process of dehydration and drying.
Dingli Brewers Spent Grains Dryer Introduction:
Product Name: Brewers Spent Grains Dryer
Producer: Zhengzhou Dingli New Energy Technology Co., Ltd
Model: No.DLSG1409
Voltage(v): 380
Total motor power(kw): 34
Vaporization(t/h): 0.45
Early moisture(%) : 60±5% (Fre sh Brewer's Grains need dehydrate before drying)
Final moisture(%) : 12-15%(adjusting)
Drying temperature('C) : 250±30'C
Capacity(t/d): 21.6
Suitable materials: All kinds of vinasse, such as brewer's grains, white wine, red vinasse.
Application: Wine or Beer production, Brewery
Usage: Animal feed, composite feed
Weight(ton): 15.5
Plant area(m): 5m*15m
Matching Products: heat source, feeding machines, feeder, rotary drum, discharging machine, draft fan, discharge, and power distribution cabinet.
Dingli Brewers Spent Grains Dryer Features:
1. This dryer has a high degree of mechanization, large production capacity, and continuous operation.
2. The structure was simple and excellent. Materials pass stably through the cylinder's resistance. Convenient to operate.
3. Low failure rate. Low maintenance cost and energy consumption.
4. Good uniformity of dried products. Bright color. Pleasant aroma. Nutrients remain unchanged.
Dingli Dry Distillation Carbonization Making Machine Description:
Product Name: Dry Distillation Carbonization Making Machine
Producer: Zhengzhou Dingli New Energy Technology Co., Ltd
Model: No.TLTL-300
Voltage(v): 380
Power(kw): 32
Host RPM (revolutions per minute): 3-5
Dimension (m): 12*2.0*3.2
Output Capacity(kg/h) : 1500-2000
Feeding way: Automatic frequency conversion feeding
Equipped with: Cooling discharging machine
Control cabinet: PLC automatic control cabinet
Production status: with carbonized color display
Suitable materials: all kinds of agricultural and forestry biomass charring making, such as sawdust, wood chip, bamboo, coconut shell, cherry shell, jujube, walnut shell, apricot shell, peanut shell, rice husk, cotton stalk, straw, bean curd, etc.
Usage: agricultural and forestry biomass charring making
Application: Charcoal factory, Biomass carbonization plant
Matching Products: flue gas purification, heat exchange system, and cooling system, feeding machine, carbonization host, cooling discharging machine, PLC automatic control cabinet.
Dingli Dry Distillation Carbonization Making Machine Features:
1. The carbonization furnace tank and cage adopt 304 stainless steel. The price will be negotiated additionally.
2. The unit price does not include lifting frame and electric hoist, denominated separately.
3. Carbonization capacity, temperature and time are decided by the material moisture content, density, particle size and carbonized depth (volatile and reserve amount). While adjusting the carbonization process parameters or change the raw material, the equipment daily output will be changed.
4. Dingli company is responsible for the client's site planning, process design, equipment installation guidance, and training, etc.
Crops straw dryer is applied for drying barley straw, oat straw, wheat straw, rye straw, straw, sorghum straw, corn straw, potato vines, beanstalks ( including materials like soybean straw, broad bean straw, pea straw, cowpea straw, lupine straw, peanut vine, etc.) According to the characteristic, production capacity, applying requirement, cost control, operating convenience of each biomass material, our company optimizes the drying technology. Recommended products: three-layer rotary drum dryer, patent number: ZL2009 2 0089749.2. This equipment is of a huge production, high efficiency, and energy-saving, small floor space. Compared with common dryer machines, it saves energy by 30%-50%, thus saving energy and drying cost to the maximum.