ORTHOSYN FIBER SUTURE
The braid structure developed for the purposes of the orthopedic surgery increases the performance and transportation characteristics of the suture. Thus, a flexible and easy-to-use orthopedic surgical suture that provides higher tensile strength than Polyester and polyblend sutures has been obtained.
Orthosyn Fiber suture provides resistance to tighter knot and knot tear during bonding. The low knot profile of the seam allows precise knot placement and a smooth bond.
The Orthosyn Fiber® suture is made from incredibly strong and durable ultra-high molecular weight polyethylene (UHMWPE) material.
Indications: Orthosyn Fiber suture is used for soft tissue approximation and / or adhesion, including allograft tissue use.
REF PRODUCT DESCRIPTION
16.150.023 orthosyn Fiber Suture #2
ORTHOSYN EGELOCK FOR ACL REPAIR SURGERY
This button implant, which is clinically proven in effectiveness and reliability, is designed by orthopedic surgeons for anterior cruciate ligament surgery, femoral tunnel hamstring graft cortex hanging detection.
The implant is made of titanium. The loop is made of polyester woven .
Pulling sutures are different colors to avoid confusion during processing.
REF PRODUCT DESCRIPTION
16.150.024 Egelock ACL button 15mm
16.150.025 Egelock ACL button 20mm
16.150.026 Egelock ACL button 25mm
16.150.027 Egelock ACL button 30mm
16.150.028 Egelock ACL button 35mm
16.150.029 Egelock ACL button 40mm
ORTHOSYN MRY KNOTLESS ANCHOR
The good knotless Anchor; They should be able to detect sutures in the bones, should not come back from the bone, facilitate the surgical technique, should not cause any problem in the post-op period, be biocompatible and allow early rehabilitation.
ORTHOSYN MRY Knotless Anchor It can be use for soft tissues. The implant is made from one piece of PEEK.
REF PRODUCT DESCRIPTION
16.150.018 3.5mm knotless anchor PEEK
16.150.019 4.5mm knotless anchor PEEK
Arthroscopic reconstructive surgery poses many challanges for the surgeon. One of these is the tying of arthroscopic knots. To achieve reliable, reproducible knots every time requires a lot of practice and skill. Some surgeons prefer knotless devices for many reasons.
Knots are extremely strong and reliable. Well tied knots are strong enough to withstand tendon and bone forces. Arthroscopic knots are the same as those used by climbers and sailors, so knot security is not a concern in the experts hands. Knots are versatile and can be used in any suture repair situation, such as margin convergence for cuff repair or with suture anchors.
Possible disadvantages of knots are a theroretical risk of tissue irritation, potential postoperative joint clicking from large knots and surgeons knot-tying skill. For consistent knot-tying a surgeon must be well practiced in tying knots on models before doing so on patients.
Knotless anchors have the advantage of avoiding the problems above and potentially reducing surgical time as well.
Orthosyn MRY knotless anchors designed for use during arthroscopic and mini open surgery and reconstruction procedures.
material: PEEK
ORTHOSYN LIGAMENT STAPLE
ligament, bone or tendon fixation
Full stability in the staple holder.
Reinforced corners for stability.
Effective anti-backout serrations.
Sharp bevelled points.
Used for the fixation of all anatomical or prosthetic components.
Used for knee or other joints.
Cobalt-chromium alloy
Staples are fixed and stable in all directions.
Full stability in the staple holder ensuring immediate fixation stability.
Reduced risk of pain due to implant micromotion.
The staples are easy to remove because they provide a firm grip to the staple extractor.
sterile or non-sterile
8X20MM
Multi-Axis Tubular Fixator
Radio Sulient not visible on x-ray
Lightweight and durable with special alloy plastic structure
Anatomical compliance with right and left fixators
Compression feature
Easy and quick application in sterile box
ORTHOSYN INTERFERENCE SCREW
-Material: PEEK
-provide strong mechanical fixation for both bone-patellar tendon-bone (BTB) and soft tissue grafts in ACL and PCL reconstruction. PEEK Interference Screws feature a thread pattern that allows for a simple surgical technique, with minimal tunnel preparation.
â??PEEK
With a modulus similar to cortical bone, PEEK polymer exhibits an ideal combination of strength, stiffness and toughness, together with a bio-inert nature and MRI compatibility.
PEEK screw with the closest character to bone structure.
It is more resistant than Biocomposite and PLLA.
Bioabsorbable is easy to revise compared to the screws.
The foreign substance does not react.
REF PRODUCT DESCRIPTION
16.150.031 orthosyn INT screw PEEK 7x25mm
16.150.032 orthosyn INT screw PEEK 7x30mm
16.150.033 orthosyn INT screw PEEK 8x25mm
16.150.034 orthosyn INT screw PEEK 8x30mm
16.150.035 orthosyn INT screw PEEK 9x25mm
16.150.036 orthosyn INT screw PEEK 9x30mm
16.150.037 orthosyn INT screw PEEK 9x35mm
16.150.038 orthosyn INT screw PEEK 10x25mm
16.150.039 orthosyn INT screw PEEK 10x30mm
16.150.040 orthosyn INT screw PEEK 11x25mm
16.150.041 orthosyn INT screw PEEK 11x30mm
INDICATION
Knee:
ACL repair
Lateral and medial cholateral ligament reconstruction.
Achilles tendon repair
Lateral ST, FDL and FHL tendon repair
Hand:
Ligament reconstruction
SCL
KLR
Elbow:
Distal Biceps tendon repair
UCL
Shoulder:
Proximal biceps tendon repair
Self Tapping
The screw threads are designed to provide maximum retention in the cortical bone.
Needle and needleless options.
Special design handle for suture and needle reserve
Ergonomic handle design
REF PRODUCT DESCRIPTION
16.150.012 2.0mm suture anchor TI without needle
16.150.013 2.8mm suture anchor TI without needle
16.150.014 3.5mm suture anchor TI without needle
16.150.015 3.5mm suture anchor TI with needle
16.150.016 5.0mm suture anchor TI with needle
16.150.017 5.0mm suture anchor TI without needle
ORTHOSYN MTP PROSTHESIS
Modular Replacement of the First Metatarsophalangeal Joint
Orthosyn MTP is a modular joint replacement for the first metatarsophalangeal joint intended for use in patients with hallux rigidis or other destructive conditions of the joint. The components are modular and can be used for either hemi- or total joint replacement. The total joint includes a polyethylene articulation. Stems are titanium and uncemented; the bearing surface is cobalt chrome.
Indications:
Hemiarthroplasty
Hallux rigidus with mild to moderate arthrosis
Advanced arthrosis, with a good weight-bearing layer of suchondral bone in the head of the 1st metatarsal
Post-traumatic arthrosis
Salvage operation following hallux valgus operation with trimming or arthrosis
Total joint replacements
Hallux rigidus with moderate to severe arthrosis
Pronounced post-traumatic arthrosis
Rheumatoid arthritis
Salvage operation in the presence of major destruction of joint proportions
Revision of silicone rubber or metal joint implants
REF PRODUCT DESCRIPTION
66.890.006 metatarsal head 8mm
66.890.007 metatarsal head 7mm
66.890.008 metatarsal head 6mm
66.890.210 metatarsal component S
66.890.220 metatarsal component M
66.890.230 metatarsal component L
66.890.240 metatarsal component XL
66.890.115 phalanx insert 15-5.0mm
66.890.125 phalanx insert 15-6.0mm
66.890.135 phalanx insert 15-7.5mm
66.890.145 phalanx insert 15-9.0mm
66.890.010 phalangeal component S
66.890.020 phalangeal component M
66.890.030 phalangeal component L
66.890.040 phalaheal component XL
REF DORSAL FLEXION SYSTEM
66.890.300 metatarsal head DF 10mm
66.890.310 metatarsal head DF 20mm
66.890.320 metatarsal head DF 30mm
66.890.330 metatarsal head DF 40mm
66.890.340 metatarsal DF component 7.5mm
66890350 metatarsal DF component 9.5mm
66.890.360 phalanx total 10mm
66.890.370 phalanx total 20mm
66.890.380 phalanx total 30mm
66.890.390 phalanx total 40mm
66.890.400 phalangeal component 7.5mm
66.890.410 phalangeal component 9.5mm
ORTHOSYN RT
ORTHOSYN RT The adjustable femoral cortical fixation system provides adjustable cortical fixation for anterior cruciate ligament reconstruction. It offers strong pulling force. ORTHOSYN RT removes the need for multiple implant sizes.
The ORTHOSYN RT Femoral Cortical Fixation System is designed for graft femoral cortical attachment.
The implant has a variable knot length structure that allows the tendon within the tunnel to be adjusted with optimum tension.
Single implant option for entire tunnel length
UHMWPE sutures for pulling
REF PRODUCT DESCRIPTION
AR-1588RT orthosyn ACL tightrope RT
ORTHOSYN SUTURE PASSER are single use instruments packaged sterile. Each type has various curved tip configurations for arthroscopic Bankart, SLAP & rotator cuff repairs. ORTHOSYN SUTURE PASSER has a 2.3 mm outer diameter tip and comes preloaded with a nitinol wire loop of suture used to shuttle suture through soft tissue. ORTHOSYN SUTURE PASSER can also be loaded with a monofilament suture for shuttling or with #2 Fiber suture to pass a stitch when using the ORTHOSYN MRY KNOTLESS ANCHORS eliminating the shuttle step.
The sharp tip and small diameter shaft will easily penetrate soft tissue while the reinforced shaft resists bending. After the tip is passed through soft tissue, the loop is deployed and retrieved through a cannula with a Crochet Hook or Suture Retriever. A suture strand or suture tail from a previously placed suture anchor is placed in the loop, and the opposite end of the loop is pulled, delivering the suture through tissue and out the cannula.
SIZES:
45 degree right and left
90 degree up
ORTHOSYN GRAFT PASSING PIN
Specifically engineered for fast, accurate and minimally invasive referencing of the Aperture to Cortex (AC) length, the GP PIN is the only graft passing guide pin of its kind.
Graft Passing Pin is used during soft tissue repairs, including cruciate ligament reconstructions, to facilitate the positioning of cannulated drills, passing of a soft tissue graft through the bone tunnel and referencing of the tunnel length.
Material: Steel
REF PRODUCT DESCRIPTION
16.150.042 graft passing pin 2.4mm Sharp Tip
16.150.043 graft passing pin 2.4mm Drill Tip
