Application:
This PTFE material is for making PTFE thread seal tape.
PTFE DF-201 suitable for low density tape
PTFE DF-203 suitable for high density tape
Material Properties:
Excellent chemical resistance
Greatest resistance to fatigue
Flame resistant
No stick &Low coefficient of friction
Not hygroscopic (water absorption < 0,01%)
Excellent dielectric insulation properties
Storage&Package:
1.Stored in clean and dry places, and temperature range is 5~30
2.Net Weight 20kg/drum., 380 drums/20 GP
3.Should be Transported as non-dangerous product, avoiding heat, moisture &strong shock.
Specification:
Item PTFE Fine Powder DF-201/203
Excellent Grade
Smoothness & Cleaness Clean & white surface
Tensile Strength, (Mpa) DF-201 24.0
DF-203 28.0
Elongation at Rupture, (%) DF-201 350
DF-203 330
Volume Density, (g/L) 475±100
Extrude pressure, ( RR100) Mpa 9.7±4.2
Average Grain, ( m) 525±150
Moisture Content, (%) 0.04
Melting Point, () 327±5
Stand Relative Density 2.200
Thermal Inst, Index, 50/30
Electric Strength, (KV/MM 2.1
Dielectric Dissipation factor 3*104
For process Paste extrusion
Application:
This PTFE Aqueous Dispersion is used for PTFE Coating & impregnating such as asbestos, fiberglass, anti-corrosive, abrasion resistant, filature and lubricating materials.
Material Properties:
Typical outstanding characteristics of fluoride Resin
Excellent thermal stability
Corrosion resistance ,Excellent chemical inertness
Good electrical insulation,Low coefficient of friction
Storage&Package:
1.Stored in clean and dry places,and temperature range is 5~30â??.
2.Net Weight 25kg/drum, 432drums/20â??GP. Or 1.2Mt/Drum.
3.Should be Transported as non-dangerous products, avoiding heat, moisture &strong shock.
Specification:
Item PTFE Aqueous Dispersion DF-301
Excellent Grade
Appearance Milky or yellow liquid
PTFE Content, % 60±2
Particle Size(μm) DF-301 0.2
PH Value 8.5~10.5
Viscosity (25â??),(Pa.s) (15-30)x10-3
Content of case active agent 4~6
For process Coating and Impregnating
Application:
Fluorinated Ethylene Propylene resin DS610 is enabling extrusion processing methods, used for wire insulation layer , tubes, films and so on.
Material Properties:
Excellent thermal quality stability
Outstanding chemical inertness
Good electrical insulation
Low coefficient of friction
Storage and package:
1.Stored in clean and dry places,and temperature range is 5~30â??.
2.Net Weight 25kg/bag
3.Should be Transported as non-dangerous product, avoiding heat, moisture &strong shock.
Attention:
The processing temperature should not be exceed 420â??, to prevent toxic gas from releasing.
Specification:
Item FEP DS610
A B
Appearance Translucent particle
Melting Index, g/10min 5.1~8.0 8.1~12.0
Hardness 58
Tensile Strength, â?¥, Mpa 21
Elongation at break, â?¥, % 300
Relative Gravity 2.12~2.17
Melting Point, â?? 265±10
Dielectric Constant (106HZ),â?¦ 2.15
Dissipation Factor (106HZ),â?¦ 7.0*10-4
Heat Stress Cracking Resistance -----
Usage Extrusion processed for generic type resin:
Wire insulation layer
FEP tube
FEP film
Application:
FEP DS618 is particularly applicable for high-speed extrusion small-caliber wire insulation material. Mainly for aviation and aerospace industry, the MTR transport vehicles, automatic switching equipment ,well test equipment ,flame alarm systems, high-rise buildings, fiber regional wires, cables, computers, communication networks, electrical fields
Material Properties:
Excellent thermal quality stability
Outstanding chemical inertness
Good electrical insulation & Low coefficient of friction
High molecular wight, low melt index & Low extrusion temperature, High extrusion speed
Soft, anti-brust and good toughness
Storage &Package:
1.Stored in clean and dry places,and temperature range is 5~30â??.
2.Net Weight 25kg/bag
3.Should be Transported as non-dangerous product, avoiding heat, moisture &strong shock.
Attention:
The processing temperature should not be exceed 420â??, to prevent toxic gas from releasing.
Specification:
Item FEP DS618
A B C D
Appearance Translucent particle,
Melting Index, g/10min 16.1~20.0 20.1~24.0 â?¥24.0 12.1~16.0
Tensile Strength, â?¥, Mpa 20.0 18.0 16.0 20.0
Elongation at break, â?¥, % 300 270 250 300
Relative Gravity 2.14~2.17
Melting Point, â?? 265±10
Dielectric Constant (106HZ),â?¦ 2.15
Dissipation Factor (106HZ),â?¦ 7.0*10-4
Hardness 58
Usage high-speed extrusion small-caliber wire insulation
Application:
Used as the important intermediate in pesticide,pharmaceutical,organic synthesis, fine chemical and other fields;heat stabilizer and plasticizer of halogenated polyolefin,etc..
Physicochemical property:
Has special odor,weak acid
Insouble in water,solublein ethanol,ether and other organci solvents
Can be reacted with heavy metals,and generates water-insoluble heavy metal salt
Can oxidation into disulfide,and reduce to 2-ETHYLHEXYL THIOGLYCOLATG
Storage&Package:
1.Pay attention to damp and sunlight during the storage and transparent,
avoid contacting with alkaline substances,oxidant,etc.
2.Packed with clean and dry PE plastic drum,200KG/drum
3.Canâ??t be kept with food,seed and beverage etc .
4. Avoiding contacting with the skin,eyes,donâ??t absorb by mouth or nose
5.Under the stated storage and transportation condition,the storage period is 6 months
Specification:
Item 2-ETHYLHEXYL THIOGLYCOLATG
Superior First class Qualified
2--ETHYLHEXYL THIOGLYCOLATGâ?§ 99.5 99.2 99.0
Sulfenyl value,% 15.99-16.18 15.91-15.98 15.83-15.90
Chroma(Pc-Co)â?¦ 5 8 10
Acid value mgKOH/gâ?¦ 0.2 0.2 0.4
CAS 7659-86-1
Molecular formula HSCH2COOC8H17
Apperance Colorless transparent liquid
Specific weight 0.974
Relative molecular weight 204.33
Boiling point 155â??/1.6Kpa
