Titanium sheet scrap
HS Code 8108
Titanium grade is 99 % (PMI Report attached)
Titanium approx. Dimension : 1700 mm L x 700 mm W Approx, Thickness: 0.5mm (But mostly mix sizes, as scrap)
The strength of the sack is its most important characteristic. It is what makes
the sack stand out compared to other industrial sacks. The reason is the fabric, woven of
polypropylene stretched tapes, which makes the sack resistant to dropping, pressing and
bending. Even when handled with a hook or damaged on a nail the sack does not rip open
and spill holds its contents.
The special sack protects your goods from factory to end
consumer
The most important characteristic of packing units is the
guarantee that the filling material will be kept as safe as possible
from the factory to the end consumer. Strong cloth keeps the
number of sacks broken or damaged during use to a
minimum.
Varying sack properties according to the specific filling goods
- from airtight to highly air-permeable for filling or breathing of
the goods - ensures perfect protection of your valuable packed
material.
No Spillage
As a result, the sack survives even rough local
handling conditions. Minimum sacks damage or breakage during
filling, conveying, loading and transport.
Water resistant
Withstanding water and humidity, the sack keeps its full strength in all conditions - even
when lying on damp ground, exposed to rain or to high air humidity. Made from water-
resistant polypropylene, the sack is not affected by any form of moisture, unlike paper.
This does not mean that sack is always completely watertight. In some
applications the sack has to be produced with micro-perforations to give it the necessary
air permeability.
UV degradable
The sack is made from polypropylene, which is broken down by UV when
exposed to sun for a long time.
1. Source Of Origin : raw Sea Salt, Hs Code: 2501
2) Season For Supply : From October 2017 To May 2018 (eight Months)
3) Quantity : Monthly Quantity Approx.20, 000 mt, Total 150, 000 Mt (per Season)
4) Port Of Delivery :any Port At Canada/usa , Cif
5) Packging: In Pp Bags Of 50kg Or One Mt Or As Per Puchase Order.
6) Payment: 100% By Irrevocable Letter Of Creidt(l/c)negotiable Against Shipping Documents.
7) Load Port Inspection: By Any Accredited Inpecting Agency Approved By Purchaser at Buyers Cost.
8) Specification: Raw Sea Salt 3mm To 6mm
One and two loop FIBC's are less complicated and more economical in comparison with the four loop FIBC's. They are produced from tubular body fabrics to obtain a higher breaking strength within the fabric.
The top lifting points are wrapped with sleeves which can be manufactured in different colours for ease of product identification. Coloured sleeves also make the lifting points highly visible for truck operators enabling easy handling of the bags by either a hook or a fork.
The most commonly used design is uncoated with an open top and a PE liner. Coated designs are also available with spouted tops. Base designs vary greatly depending on the application; these include square, star or a single seam. Discharge spouts can be added, to the square base design only. For a manual filling application, bags are press bailed and packed on pallets.
Bags can also be wound on rolls to be used on automatic filling stations if required.
To protect bulk products like plastic resins, minerals, loaded directly into containers or trucks whenever shipment in standard bulk trucks is not suitable, container liner is used. Container liners are designed to smooth the process of the carriage of loose dry bulk cargo in standard freight containers.
Benefits of Container Liner
Minimized packing wastage
Reduce costs by eliminating small costly packaging units
Easy to install â?? less than 10 minutes
Protect goods and containers from contamination, moisture, etc.
Time and labor savings because of efficient loading and discharge
Maximise container space
For Sale in USA & Canada only
Special design is constructed utilising inner baffles which help maintain the cubic form once the FIBC has been filled.
These baffles are manufactured specifically to allow the material to flow into the corners of the bag. Within this design mechanism and because of the cubic shape of the bag, it requires less storage space and can reduce transportation costs upto 30% in comparison with a standard big bag.
Specially designed net baffle, enable low flow products to flow directly to the corners of the formed bag. Unique compared to formed bag baffle design with holes, the horizontally knitted yarns provide extra sift proof and load securement during stacking.
The very unique yarns forming this design avoid contamination of the filled products at all times.
Payload: Between 500kgs to 1,500kgs per bag depending on design.
Flexitank is a bulk liquid container made of multiple layers of polyethylene with an outer covering fabric of woven polypropylene. Flexitank can accomodate up to 24,000 liters, for transportation using the standard 20-foot container. The ingredients of which are approved by the FDA for the carriage of a wide range of liquid foodstuffs. Single use only. Flexitanks offer a dynamic, flexible, safe and cost effective solution for all bulk liquid transport requirements.
For Sale in USA & Canada only.
