Aluminum wire (Pure Aluminum Wire, Aluminum Line and Spray Finishing Aluminum Wire) ,The surface of aluminum wire is smooth and bright; no break of wire exists; single wire has no greasy dirt, burr, scratch or scar; there is no block of device in application.
The product adopts high quality aluminum ingot, no other substances enter the process from raw material (aluminum ingot) input to strip output, and the product is not exposed to other metal. The detection adopts DF-100 type direct-reading spectrometer, inductively coupled plasma atomic emission spectrum and other high-end testing instruments. Strict check and detection are conducted in the whole working procedures including raw material-wire output-big drawing-middle drawing-water tank-baling-storage. Not a tiny detail is neglected. Hence, the long-term stability of product performance is ensured. The content of each batch of aluminum wire is guaranteed to be above 99.7%.
Product Name : Pure aluminum wire
Diameter of Aluminum Wire: 1.0- 5mm
Package :
20-50kg/bundle;7kg/reel(spool);
50-100kg/barrel
Content : 969.7%
Application
Cable industry and thermal spraying, aluminum spraying and anticorrosion on the surface of capacitor, power tower, iron tower, container, derrick, bridges, sluice gate, tunnel framework, metal support, large steel structure and others.
Characters
1. The size and shape of spraying are insusceptible. Spraying can be conducted on the whole surface, or on a large defined surface, which is a convenient and economical method in coating the partial surface of a large unit.
2. The parent material doesnt change. For the heated temperature on parent material is low during spraying, the work piece only distorts slightly.
3. The thickness of coating varies in a large range, from several microns to several millimeters.
4. Spraying moulding is available. Thermal spraying technology can not only form a coating on the surface of material, but also be used to manufacture machinery parts, namely, spraying molding products.
Transportation & Storage: Wrap page and means of transportation with acid, alkali or salt that may corrode aluminum are forbidden. Aluminum segment should be stored in a dry and ventilated storeroom which is free of corrosive substance and be protected from rain.
Application
Aluminum wire is widely applied to thermal spraying anticorrosion, container, bridge, head frame, storage tank, electric iron tower, poles and towers, capacitor, metal bracket, nodular cast iron pipe, traffic equipments, etc.
Aluminium wire (Pure Aluminium Wire, Aluminium Line and Spray Finishing Aluminium Wire) ,The surface of aluminium wire is smooth and bright; no break of wire exists; single wire has no greasy dirt, burr, scratch or scar; there is no block of device in application.
The product adopts high quality aluminium ingot, no other substances enter the process from raw material (aluminium ingot) input to strip output, and the product is not exposed to other metal. The detection adopts DF-100 type direct-reading spectrometer, inductively coupled plasma atomic emission spectrum and other high-end testing instruments. Strict check and detection are conducted in the whole working procedures including raw material-wire output-big drawing-middle drawing-water tank-baling-storage. Not a tiny detail is neglected. Hence, the long-term stability of product performance is ensured. The content of each batch of aluminium wire is guaranteed to be above 99.7%.
Specification:
Aluminium wire for thermal spray
Composition: Al 99.7%
Diameter: 1.2-4.75mm
Package: 20-150kg/bundle, 7kg/Spool, 50-250kg/barrel (drum)
Characters:
1. The size and shape of spraying are insusceptible. Spraying can be conducted on the whole surface, or on a large defined surface, which is a convenient and economical method in coating the partial surface of a large unit.
2. The parent material doesn’t t change. For the heated temperature on parent material is low during spraying, the work piece only distorts slightly.
3. The thickness of coating varies in a large range, from several microns to several millimetres.
4. Spraying moulding is available. Thermal spraying technology can not only form a coating on the surface of material, but also be used to manufacture machinery parts, namely, spraying molding products.
Transportation & Storage: Wrap page and means of transportation with acid, alkali or salt that may corrode aluminium are forbidden. Aluminium segment should be stored in a dry and ventilated storeroom which is free of corrosive substance and be protected from rain.
Application
Aluminium wire is widely applied to thermal spraying anticorrosion, container, bridge, head frame, storage tank, electric iron tower, poles and towers, capacitor, metal bracket, nodular cast iron pipe, traffic equipment’s, etc.
Chain link fence is also known as diamond wire mesh and rhombus wire mesh. Made of quality low steel wire, stainless steel wire, aluminum alloy wire and pvc wire.
Chain link fence comes in a wire range of qualities, colours , sizes and types. The chain link has for elements: fabric, framework, fittings and gates. Each of these components are available in a range of weights and types of coatings you can mix and match to save costs, be more unique. Select chain link fence fabric based on: gauge of wire, size of mesh and type of protective coating. Several types of surface treatments help protect and beautify steel chain link fences.
Assortments
Electro gal.Chain link fence?hot dipped gal. Chain link fence?pvc coated chain link fence
Characteristics
(1)state and flexible
(2)strong
(3)does not break
(4)does not sag or roll up the bottom
Application
(1)steel high quality low carbon steel wire rod, then make into the thickness low carbon steel wire with the drawing machine.
(2)surface treatment: make the low carton steel wire into pvc wire, electric galvanized wire, hot-dipped galvanized wire. About zinc thickness of the hot-dipped galvanized wire, we can make as customers' required.
(3)weaving: using the development machinery to make surface treatment finished low carbon steel wire into per-forming form, then linking them together.
(4)the edge of the chain link fence :it is divided into two types. One type is a twisted one. Using special tools to make the edge heming or twisting. The hemed edge is more popular compared with the twisted edge. Customers can choose to their own needs.
(5)the construction of chain link fence: we use the advanced machines to make the roll diameter of chain link fence into the smallest one, in order to save transportation costs by saving volume.
(6)packing: wrap up the two edges of the crimpled rolls with the weaving bags.
Pure zinc wire /fine zinc wire for flame and electric arc spraying
The surface of the zinc wire is smooth and bright, no broken wires, no greasy dirty and burrs, no scratches and scars, no jam in the process of use
Product purity: zinc content more than 99.995%
Diameter: 1.0mm-4.0mm
Package:20--5kg/bundle 15kg-20kg/shaft 50kg-250kg/barrel
Material: adopt 0 distillation zinc ingot produced by hulo island zinc co., ltd, zinc content more than 99.995%. The material used is strictly stick to national standards gb/470-2008
Characters:
1.The size and shape of spray will not be affected. You can spray on the whole surface, and also you can spray the limited surface which is convenient and economical to the parts of large conponents.
2.The parent material will not change. Because when spraying, the parent material will become small due to low temperature.
3.The thick of coating can be changed in large range from several microns to several millimeters
4.It can be sprayed to form shapes. Hot spraying technology can be used not only to form shape in the surface, but also to manufacture mechanical parts, that is spraying molding products.
Transportation storageïit is forbidden to bring with acid, alkali, salt corrosion of zinc by packaging and transportation shipment, and it should be stored in dry, ventilated, non-corrosion material warehouse and keep out of rain.
Applications
The thermal spraying wire is used in a variety of applications, such as:
1.High-temperature oxidation protection used, for example, to resist gases in boiler atmospheres
2.Coatings to resist heat and prevent scaling of conventional low alloy steels
3.Bond coats for improving the adhesion of top coatings
4.Coatings on moulds in the glass industry
It is used in the flame spraying, arc spraying, supersonic plasma spraying, the ordinary plasma spraying.
Fiberglass plain woven wire netting, also called invisible wire netting, is made from fiber glass which pvc coated single wire, produced by plain weaving
Brief description
1. Material: fiberglass
2. Standard mesh/inch: 20*20, 20*18, 18*18, 18*16, 18*14, 16*16, 16*14, 14*14 etc.
3. Standard colors: gray, black, white, green, yellow, gray-white mix. Etc. (available of other colors)
4. Standard width: 5"?110"
Fiberglass mesh is woven by fiberglass yarn as its basis mesh, and then coated by alkaline resistant latex. It has fine alkaline-resistant, high strength, etc. As an ideal engineering material in construction.
Material
Fiberglass woven
Usage
It reacts important affect in heat preservation system, prevent crack and widely used for wall warm keeping, wall material and cement reinforcing, surface decorating, mosaic back mounting, crack repairing and so on.
Package
Bags or as customer's request.
Colors
White (standard), blue, green, or other colors.
Characteristics
It has excellent properties like high alkali-resistance; good cohesion, flexibility, tensile strength, etc. Coated fiberglass mesh can be widely used in wall heat reservation system, water-proof and preventing cracks.
We can supply special mesh as following:
(1) high strength mesh
(2) fire proof mesh
(3) strong and flexible mesh
We can supply specifications from 30g/m2 to 500g/m2 for mesh.
Sun shade netting also named shade cloths in plastic mesh is used against sun's harmful rays.
Materials
100% high density polyethylene with u.V. Stabilized.
How shade netting functions against sun: shade netting is fabricated from high grade extra heavy plastic mesh cloth specially designed to breathe and keep you cooler and more comfortable in hot weather. It can offer up to 95 uv protection and block up to 90 of the suns harmful rays. There are rust free d rings to each corner of the sails, re-enforced edges with webbing sewn within and double stitched.
Specification
1)the usual size of our shade sail is 3m, 3.6m and 5m both triangle and square.
2)the usual weight of the fabric for the shade sail is 185g/m2, 280g/m2, 320g/m2 and 350g/m2.
3)the shade factor is from 80 to 98.In fact shade cloths are available in just about any shape, size and color.
Features
Shade cloths are widely used in outdoor living areas, such as car port, swimming pools, sand pits, children play areas and so on.
Technical index: shade rate: 50, 60, 70, 80, 90, 95.Material: hdpe, aluminum strip, polyester strip. With anti-uv protect addition. Color: black, green, silver white, silver green, black white weight: 35~180g.Warranty: 4years, 5years, 10years.
Apllication
1) the green house sun shade net can be used to provide shade , against sunlight and to control temperature to keep cool , it can be used in everywhere which needs sunshine preventing , such as gardening , agriculture , plants , swimming pool. Balcony , arena , house yard , house and restaurant window etc.
2) the material of green house sun shade net is 100% hdpe and is no harm to human or environment
Stainless steel filter wire mesh is also known as filter wire cloth , micron wire cloth, wire cloth filter screens, micron filtration cloth, micronic mesh, wire filter mesh, micron mesh, filter wire mesh, filtering mesh, filter screen, micron filtering mesh, filtration screen.
Material
Sus201, sus304, 304l, sus316, sus316l, 310, 310s, sus302, etc.
Classification
Stainless steel filter circle /filter disc, stainless steel filter cap, stainless steel filter cartridge , stainless steel filter basket
Packing
Packaging:in roll, waterproof paper inside and woven bag outside.Or according to customer demand based on different size and type product .
z
1.Forged grinding balls
Our products range from 20mm to 150mm, 1 inch to 6 inch, and we can also offer all size of products according to clients demand.
2.Features:
1) forged grinding ball has high hardness: surface hardness to 58-65hrc, volume hardness of 57-64hrc
2) impact toughness high: impact toughness more than 12j / cm2.
3) broken rate is low: the actual broken rate is not higher than 0.5%.
4) loss of forged grinding ball round rate is low.
5) dropping test in 8m high tester for more than 20, 000 times.
Introduction
Casting steel ball diameter from 20-150mm with high hardness, low wear,
Low broken rate, strong heat resistant and corrosion resistance, chromium content
From 1%-28%, hrc45-63, .Detailed specifications can be customized according
To customer demand. It is particularly used in cement industry working in the grinder with high temperature, high crushing and strong abrasion .
The grinding ball with chromium content 1% - 3% and hardness hrc =45 called
Low chromium alloy cast ball. Low chromium ball is produced by the intermediate frequency electric furnace smelting, metal mold or sand casting .
Features
Good toughness, low abrasion rate, low broken rate , low chromium ball hardness can reach 45-55hrc
z
Introduction:
The grinding ball with chromium content =10%-14%, hrc =58 is popular on current market and also very economic .
Chromium content =47, hrc =58 , this kind ball is called special high chromium steel ball
High chrome grinding ball issuitable for the industry with high requirement on grinding fine, and high abrasion .
High chrome grinding ball can increase production, and reduce consumption obviously in the cement industry.
Features:
Good toughness, low abrasion, low broken rate of low chromium alloy casting; low chromium ball hardness can reach 50-62hrc
z
Introduction:
Grinding rods can be customized according to customer's requirements
Automatic production line of grinding rods, which can be quenched and tempered automatically.
It is mainly used for metallurgical and mining, cement plant, thermal power, chemical industry, etc.
Features
High hardness, range is 45~55hrc
Low bending, less than 1.5mm/m
Dense microstructure , bainite +pearlite+carbide
Low breakage rate, more than 15000 times/ 3.5m
Low unit consumption, 40% reduction compared to unprocessed round steel
z
Zinc wire 99.995% for galvanized steel pipe
Pure zinc wire
The surface of the zinc wire is smooth and bright, no broken wires, no greasy dirty and burrs, no scratches and scars, no jam in the process of use
Product purity: zinc content more than 99.995%
Diameter: 1.0mm-5.0mm (1.4mm , 1.6mm, 2.0mm, 2.5mm, 3.17, 4.76mm..)
Package:20--50kg/bundle 15kg-20kg/shaft 50kg-250kg/barrel
Material: adopt 0 distillation zinc ingot , zinc content more than 99.995%. The material used is strictly stick to national standards gb/470-2008
Characters:
1.The size and shape of spray will not be affected. You can spray on the whole surface, and also you can spray the limited surface which is convenient and economical to the parts of large conponents.
2.The parent material will not change. Because when spraying, the parent material will become small due to low temperature.
3.The thick of coating can be changed in large range from several microns to several millimeters
4.It can be sprayed to form shapes. Hot spraying technology can be used not only to form shape in the surface, but also to manufacture mechanical parts, that is spraying molding products.
Transportation storageïit is forbidden to bring with acid, alkali, salt corrosion of zinc by packaging and transportation shipment, and it should be stored in dry, ventilated, non-corrosion material warehouse and keep out of rain.
Applications
The thermal spraying wire is used in a variety of applications, such as:
1.High-temperature oxidation protection used, for example, to resist gases in boiler atmospheres
2.Coatings to resist heat and prevent scaling of conventional low alloy steels
3.Bond coats for improving the adhesion of top coatings
4.Coatings on moulds in the glass industry
It is used in the flame spraying, arc spraying, supersonic plasma spraying, the ordinary plasma spraying.
The surface of the zinc wire is smooth and bright, no broken wires, no greasy dirty and burrs, no scratches and scars, no jam in the process of use
Product purity: zinc content more than 99.995%
Diameter: 1.0mm-4.0mm
Package:20--5kg/bundle 15kg-20kg/shaft 50kg-250kg/barrel
Material: adopt 0# distillation zinc ingot produced by hulo island zinc co., ltd, zinc content more than 99.995%. The material used is strictly stick to national standards gb/470-2008
Characters:
1.The size and shape of spray will not be affected. You can spray on the whole surface, and also you can spray the limited surface which is convenient and economical to the parts of large conponents.
2.The parent material will not change. Because when spraying, the parent material will become small due to low temperature.
3.The thick of coating can be changed in large range from several microns to several millimeters
4.It can be sprayed to form shapes. Hot spraying technology can be used not only to form shape in the surface, but also to manufacture mechanical parts, that is spraying molding products.
Transportation storageï¼?it is forbidden to bring with acid, alkali, salt corrosion of zinc by packaging and transportation shipment, and it should be stored in dry, ventilated, non-corrosion material warehouse and keep out of rain.
Applications
The thermal spraying wire is used in a variety of applications, such as:
1.High-temperature oxidation protection used, for example, to resist gases in boiler atmospheres
2.Coatings to resist heat and prevent scaling of conventional low alloy steels
3.Bond coats for improving the adhesion of top coatings
4.Coatings on moulds in the glass industry
It is used in the flame spraying, arc spraying, supersonic plasma spraying, the ordinary plasma spraying.
Zinc wire for power transmission tower
Pure zinc wire
The surface of the zinc wire is smooth and bright, no broken wires, no greasy dirty and burrs, no scratches and scars, no jam in the process of use
Product purity: zinc content more than 99.995%
Diameter: 1.0mm-4.0mm
Package:20--5kg/bundle 15kg-20kg/shaft 50kg-250kg/barrel
Material: adopt 0distillation zinc ingot produced by hulo island zinc co., ltd, zinc content more than 99.995%. The material used is strictly stick to national standards gb/470-2008
Characters:
1.The size and shape of spray will not be affected. You can spray on the whole surface, and also you can spray the limited surface which is convenient and economical to the parts of large conponents.
2.The parent material will not change. Because when spraying, the parent material will become small due to low temperature.
3.The thick of coating can be changed in large range from several microns to several millimeters
4.It can be sprayed to form shapes. Hot spraying technology can be used not only to form shape in the surface, but also to manufacture mechanical parts, that is spraying molding products.
Transportation storageit is forbidden to bring with acid, alkali, salt corrosion of zinc by packaging and transportation shipment, and it should be stored in dry, ventilated, non-corrosion material warehouse and keep out of rain.
Applications
The thermal spraying wire is used in a variety of applications, such as:
1.High-temperature oxidation protection used, for example, to resist gases in boiler atmospheres
2.Coatings to resist heat and prevent scaling of conventional low alloy steels
3.Bond coats for improving the adhesion of top coatings
4.Coatings on moulds in the glass industry
It is used in the flame spraying, arc spraying, supersonic plasma spraying, the ordinary plasma spraying.
Pure 99.995% zinc wire for metal protection
Pure zinc wire
The surface of the zinc wire is smooth and bright, no broken wires, no greasy dirty and burrs, no scratches and scars, no jam in the process of use
Product purity: zinc content more than 99.995%
Diameter: 1.0mm-5.0mm
Package:20--5okg/bundle 15kg-20kg/shaft 50kg-250kg/barrel
Material: adopt 0 distillation zinc ingot , zinc content more than 99.995%. The material used is strictly stick to national standards gb/470-2008
Characters:
1.The size and shape of spray will not be affected. You can spray on the whole surface, and also you can spray the limited surface which is convenient and economical to the parts of large conponents.
2.The parent material will not change. Because when spraying, the parent material will become small due to low temperature.
3.The thick of coating can be changed in large range from several microns to several millimeters
4.It can be sprayed to form shapes. Hot spraying technology can be used not only to form shape in the surface, but also to manufacture mechanical parts, that is spraying molding products.
Transportation storageïit is forbidden to bring with acid, alkali, salt corrosion of zinc by packaging and transportation shipment, and it should be stored in dry, ventilated, non-corrosion material warehouse and keep out of rain.
Applications
The thermal spraying wire is used in a variety of applications, such as:
1.High-temperature oxidation protection used, for example, to resist gases in boiler atmospheres
2.Coatings to resist heat and prevent scaling of conventional low alloy steels
3.Bond coats for improving the adhesion of top coatings
4.Coatings on moulds in the glass industry
Assortment
Electro galvanized barbed wire , hot dipped galvanized barbed wire ,Pvc barbed wire
Materials
High quality low carbon steel wire ,PVC wire. Blue ,green, yellow and other colors available.
Usage
Galvanized Barbed Iron Wire offered by us is suitable for industry, agriculture, animal husbandry, dwelling house, plantation or fencing.
Package
In coils. Pallet or depend on the request of customer .
Thermal spraying with zinc wire was 99.99%, when the atmospheric conditions is not in serious corrosion (such as dry weather), can reduce the the purity to 99.95%.Zinc has good plasticity, can draw wire material, used for wire arc spraying and flame spraying.When in the flame spraying, purity of zinc in the process of spraying generally will not change.
Specification
Package of zinc wire : bundle , spool , drum
Diameter :0.5-5.0mm
Zinc content :99.995
Characters
1.The size and shape of spray will not be affected. You can spray on the whole surface, and also you can spray the limited surface which is convenient and economical to the parts of large conponents.
2.The parent material will not change. Because when spraying, the parent material will become small due to low temperature.
3.The thick of coating can be changed in large range from several microns to several millimeters.
4.It can be sprayed to form shapes. Hot spraying technology can be used not only to form shape in the surface, but also to manufacture mechanical parts, that is spraying molding products.
The surface of the zinc wire smooth and bright, broken wires, no greasy dirty and burrs, no scratches and scars, no jam in the process of use.
Applications
The thermal spraying zinc wire is used in a variety of applications, such as:
1.High-temperature oxidation protection used, for example, to resist gases in boiler atmospheres
2.Coatings to resist heat and prevent scaling of conventional low alloy steels
3.Bond coats for improving the adhesion of top coatings
4.Coatings on moulds in the glass industry
It is used in the flame spraying, arc spraying, supersonic plasma spraying, the ordinary plasma spraying.
Hexagonal wire netting is a metal wire netting, which use of metal wire weave,
The use of metal wire diameter is based on the size of the hexagonal.
If it is Galvanized hexagonal wire netting, steel wire diameter we use 0.3mm-2.0mm.
It is PVC-coating hexagonal wire netting, the outside diameter of pvc wire we use 0.8mm-2.6mm. then weaved to various specification hexagonal mesh.
Frame edge of the line can be made into unilateral, bilateral, can be moved side wire. roads.
Assortments
Electro gal. hexagonal wire netting?Hot dipped gal. hexagonal wire netting?hex. wire netting in Straight twist, Galvanized hex. wire netting in reverse twist.
Material
low carbon steel wire, stainless steel wire etc.
Weaving Patterns: Straight twist, reverse twist, double twist. Process: Galvanized after weaving or galvanized before weaving. Finish: Electric galvanizing, hot-dip zinc plating, stainless steel or PVC coated.
Characteristics
(1)Straight twist, reverse twist, double twist.
(2)PVC coated hexagonal wire mesh is coated PVC with galvanized wire surface then weaved to various specification hexagonal mesh. The protect of PVC can increase the mesh's life, UV Resistance, aging resistance and weather resistance .Different color choices, it can be integrated with the surrounding natural environment
(3)Galvanized hexagonal wire netting use of low carbon steel wire weave,the steel wire of tensile strength of not less than 20kg/m2,steel wire diameter can reach 0.3mm-2.0mm,
the surface treatment we can choose of electric galvanizing and hot-dip zinc plating to protect, the thickness of galvanized protect we can make it as clients requires.
The Zinc-coating we can make to 300g/ m�
Usage
(1) Fixed the construction wall surface, heat preservation, heat insulation
(2) The power plant grips the pipeline, to maintain warmth the boiler, heat preservation
(3) Frost proof, housing protection, botanical garden afforestation protection
(4) Raises chicken and the duck, isolates chicken and duck shed, Protects Poultry.
(5) To protect the seawall, hillsides, road ,bridge projects and so on.
Thermal spraying with zinc wire was 99.99%, when the atmospheric conditions is not in serious corrosion (such as dry weather), can reduce the the purity to 99.95%.Zinc has good plasticity, can draw wire material, used for wire arc spraying and flame spraying.When in the flame spraying, purity of zinc in the process of spraying generally will not change.
Specification
Package of zinc wire : bundle , spool , drum
Diameter :0.5-5.0mm
Zinc content :99.995%
Characters
1.The size and shape of spray will not be affected. You can spray on the whole surface, and also you can spray the limited surface which is convenient and economical to the parts of large conponents.
2.The parent material will not change. Because when spraying, the parent material will become small due to low temperature.
3.The thick of coating can be changed in large range from several microns to several millimeters.
4.It can be sprayed to form shapes. Hot spraying technology can be used not only to form shape in the surface, but also to manufacture mechanical parts, that is spraying molding products.
The surface of the zinc wire smooth and bright, broken wires, no greasy dirty and burrs, no scratches and scars, no jam in the process of use.
Applications
The thermal spraying zinc wire is used in a variety of applications, such as:
1.High-temperature oxidation protection used, for example, to resist gases in boiler atmospheres
2.Coatings to resist heat and prevent scaling of conventional low alloy steels
3.Bond coats for improving the adhesion of top coatings
4.Coatings on moulds in the glass industry
It is used in the flame spraying, arc spraying, supersonic plasma spraying, the ordinary plasma spraying.
Assortment
Electro galvanized barbed wire , hot dipped galvanized barbed wire , pvc barbed wire
Materials
High quality low carbon steel wire , pvc wire. Blue , green, yellow and other colors available.
Usage
Galvanized barbed iron wire offered by us is suitable for industry, agriculture, animal husbandry, dwelling house, plantation or fencing.
Package
In coils. Pallet or depend on the request of customer .
Specification list (customization is also available)
Bwg12x14 bwg12x12 bwg12-1/2x12-1/2 bwg14x14
z
Assortment
electro galvanized wire ;Hot dipped galvanized iron wire
-Electro galvanized iron wire
It can be supplied in the form of coil wire, bobbins wire, spool wire, cut wire .
Electro galvanized iron wire, also written as electric galvanized steel wire, or galvanized iron wire, galvanized wire. Electro galvanized steel wire and hot-dipped galvanized steel wire .
Material
Low carton steel wire,Q195.
Technical explanation
Electro galvanized wire gauge from BWG8-BWG32
Tensile strength is 45kg/mm2-70kg/mm2
Firmed coating layer
The single roll wire without any inter-cuts of breaks
Characteristicï¹ Application
High Zinc coating with super in corrosion resistance, firmed and well-proportioned Zinc coating, slippery surface, uses in the weaving of wire mesh and reprocess, widely used in industry., agriculture and stockbreeding etc.
-Hot dipped galvanized iron wire
Material
Low carton steel wire, Q 195.
Technical Assortment
Hot dipped galvanized iron wire, zinc coating: 30G/M2-370G/M2
The standard wire guage from BWG8-BWG32.
Tensile strength is 45kg/mm2-70kg/mm2.
The single roll wire without any inter-cuts or breaks
Characteristicï¹ Application
High zinc coating with super in corrosion resistance, firmed and well-proportioned and zinc coating, slippery surface. Uses in the weaving wire mesh and process, widely used in industry and stockbreeding etc.
Package
0.3kgs to 1000kgs are available, plastic inside and weaving bag outside.
Thermal spraying with zinc wire was 99.99%, when the atmospheric conditions is not in serious corrosion (such as dry weather), can reduce the the purity to 99.95%.Zinc has good plasticity, can draw wire material, used for wire arc spraying and flame spraying.When in the flame spraying, purity of zinc in the process of spraying generally will not change.
Characters
1.The size and shape of spray will not be affected. You can spray on the whole surface, and also you can spray the limited surface which is convenient and economical to the parts of large conponents.
2.The parent material will not change. Because when spraying, the parent material will become small due to low temperature.
3.The thick of coating can be changed in large range from several microns to several millimeters.
4.It can be sprayed to form shapes. Hot spraying technology can be used not only to form shape in the surface, but also to manufacture mechanical parts, that is spraying molding products.
The surface of the zinc wire smooth and bright, broken wires, no greasy dirty and burrs, no scratches and scars, no jam in the process of use.
Black annealed wire
Before the big pull, there will be a surface treatment: Pickling----Washing----Phosphide-----Soaping----Drying. The treatment function is rust removing, Phosphide and soaping are good for next pulling proess.
Row material
Low carbon steel wire , Q195 or Q235
Advantages
Soften and flexible character
Low costs and economy
Easy to handle or install
Tensile strength :300-500Mpa
Rate of Extend :15%
Grinding cylpebs specification
Ball diameter(mm)
F10
F12.7
F15
F17
F20
F25
F30
F40
F50
F60
F70
F80
F90
F100
F110
F120
F125
F130
Chemical coposition
Zqcr2
C
Si
Mn
Cr
Mo
P
S
2.2-3.5
0.3-1.4
0.2-1.5
0.3-3.0
1.0
0.15
0.15
Properties and microstructure
Designation
Hrc
Impact value(j/cm2)
Microstructure
Times of falling balls
Zqcr2
46
1.5
P+c
15000
z
Razor barbed tape is a kind of modern security fencing materials fabricated with razor-sharp steel blade and high-tensile wire.
Assortment
Barbed tape concertina (btc);barbed tape obstacle (bto) standard materials are either galvanized or stainless steel. Standard packages products are shown in the tables below, special specifications available on request.
Usage
Barbed tape can be installed to achieve the result of frightening and stopping to the aggressive perimeter intruders, with piecing and cutting razor blades mounted at the top of the wall, also the special designs making climbing and touching extremely difficult. The wire and strip are galvanized to prevent corrosion. Currently, barbed tape has been widely used by many countries in military field, prisons, detention houses, government buildings and other national security facilities. Recently years, barbed tape has apparently become the most popular high-class fencing wire for not only military and national security applications, but also for cottage and society fence, and other private buildings.
Advantages
(1)high security barbed razor wire with the sharp razor guarantees a high security whilst retaining high quality.
(2)long life razor wire material of stainless steel or hot-galvanized makes sure for long life and low maintenance.
(3)easy installation short sections needed for urgent security can be installed extremely fast and with little equipment, allowing repairs to be carried out without compromising perimeter security.
Assortment
Electro galvanized wire ;hot dipped galvanized iron wire
-electro galvanized iron wire
It can be supplied in the form of coil wire, bobbins wire, spool wire, cut wire .
Electro galvanized iron wire, also written as electric galvanized steel wire, or galvanized iron wire, galvanized wire. Electro galvanized steel wire and hot-dipped galvanized steel wire .
Material
Low carton steel wire, q195.
Technical explanation
Electro galvanized wire gauge from bwg8-bwg32
Tensile strength is 45kg/mm2-70kg/mm2
Firmed coating layer
The single roll wire without any inter-cuts of breaks
Characteristicï¹ application
High zinc coating with super in corrosion resistance, firmed and well-proportioned zinc coating, slippery surface, uses in the weaving of wire mesh and reprocess, widely used in industry., agriculture and stockbreeding etc.
-hot dipped galvanized iron wire
Material
Low carton steel wire, q 195.
Technical assortment
Hot dipped galvanized iron wire, zinc coating: 30g/m2-370g/m2
The standard wire guage from bwg8-bwg32.
Tensile strength is 45kg/mm2-70kg/mm2.
The single roll wire without any inter-cuts or breaks
Characteristicï¹ application
High zinc coating with super in corrosion resistance, firmed and well-proportioned and zinc coating, slippery surface. Uses in the weaving wire mesh and process, widely used in industry and stockbreeding etc.
Package
0.3kgs to 1000kgs are available, plastic inside and weaving bag outside.
z
Pure zinc wire / spraying wires made of fine zinc
The surface of the zinc wire is smooth and bright, no broken wires, no greasy dirty and burrs, no scratches and scars, no jam in the process of use
Product purity: zinc content more than 99.995%
Diameter: 1.0mm-4.0mm
Package:20--5kg/bundle 15kg-20kg/shaft 50kg-250kg/barrel
Material:adopt 0# distillation zinc ingot , zinc content more than 99.995%. The material used is strictly stick to national standards gb/470-2008
Characters:
1.The size and shape of spray will not be affected. You can spray on the whole surface, and also you can spray the limited surface which is convenient and economical to the parts of large conponents.
2.The parent material will not change. Because when spraying, the parent material will become small due to low temperature.
3.The thick of coating can be changed in large range from several microns to several millimeters
4.It can be sprayed to form shapes. Hot spraying technology can be used not only to form shape in the surface, but also to manufacture mechanical parts, that is spraying molding products.
Transportation storageïit is forbidden to bring with acid, alkali, salt corrosion of zinc by packaging and transportation shipment, and it should be stored in dry, ventilated, non-corrosion material warehouse and keep out of rain.
Applications
The thermal spraying wire is used in a variety of applications, such as:
1.High-temperature oxidation protection used, for example, to resist gases in boiler atmospheres
2.Coatings to resist heat and prevent scaling of conventional low alloy steels
3.Bond coats for improving the adhesion of top coatings
4.Coatings on moulds in the glass industry
It is used in the flame spraying, arc spraying, supersonic plasma spraying, the ordinary plasma spraying.
Pure zinc wire / zinc wire for corrosion resistant
The surface of the zinc wire is smooth and bright, no broken wires, no greasy dirty and burrs, no scratches and scars, no jam in the process of use
Product purity: zinc content more than 99.995%
Diameter: 1.0mm-4.0mm
Package:20--5kg/bundle 15kg-20kg/shaft 50kg-250kg/barrel
Material: adopt 0 distillation zinc ingot produced by hulo island zinc co., ltd, zinc content more than 99.995%. The material used is strictly stick to national standards gb/470-2008
Characters:
1.The size and shape of spray will not be affected. You can spray on the whole surface, and also you can spray the limited surface which is convenient and economical to the parts of large conponents.
2.The parent material will not change. Because when spraying, the parent material will become small due to low temperature.
3.The thick of coating can be changed in large range from several microns to several millimeters
4.It can be sprayed to form shapes. Hot spraying technology can be used not only to form shape in the surface, but also to manufacture mechanical parts, that is spraying molding products.
Transportation storageïit is forbidden to bring with acid, alkali, salt corrosion of zinc by packaging and transportation shipment, and it should be stored in dry, ventilated, non-corrosion material warehouse and keep out of rain.
Applications
The thermal spraying wire is used in a variety of applications, such as:
1.High-temperature oxidation protection used, for example, to resist gases in boiler atmospheres
2.Coatings to resist heat and prevent scaling of conventional low alloy steels
3.Bond coats for improving the adhesion of top coatings
4.Coatings on moulds in the glass industry
It is used in the flame spraying, arc spraying, supersonic plasma spraying, the ordinary plasma spraying.
1.5mm drum package zinc wire for high frequency welded pipe
Pure zinc wire
The surface of the zinc wire is smooth and bright, no broken wires, no greasy dirty and burrs, no scratches and scars, no jam in the process of use
Product purity: zinc content more than 99.995%
Diameter: 1.0mm-5.0mm (1.4mm , 1.6mm, 2.0mm, 2.5mm, 3.17, 4.76mm..)
Package:20--50kg/bundle 15kg-20kg/shaft 50kg-250kg/barrel
Material: adopt 0 distillation zinc ingot produced by hulo island zinc co., ltd, zinc content more than 99.995%. The material used is strictly stick to national standards gb/470-2008
Characters
1.The size and shape of spray will n
ot be affected. You can spray on the whole surface, and also you can spray the limited surface which is convenient and economical to the parts of large conponents.
2.The parent material will not change. Because when spraying, the parent material will become small due to low temperature.
3.The thick of coating can be changed in large range from several microns to several millimeters
4.It can be sprayed to form shapes. Hot spraying technology can be used not only to form shape in the surface, but also to manufacture mechanical parts, that is spraying molding products.
Transportation storage ï¼?it is forbidden to bring with acid, alkali, salt corrosion of zinc by packaging and transportation shipment, and it should be stored in dry, ventilated, non-corrosion material warehouse and keep out of rain.
Applications
The thermal spraying wire is used in a variety of applications, such as:
1.High-temperature oxidation protection used, for example, to resist gases in boiler atmospheres
2.Coatings to resist heat and prevent scaling of conventional low alloy steels
3.Bond coats for improving the adhesion of top coatings
4.Coatings on moulds in the glass industry
It is used in the flame spraying, arc spraying, supersonic plasma spraying, the ordinary plasma spraying.
zinc wire of size 3.17 mm and size 2.5 mm for the process of metallizing
The surface of the zinc wire is smooth and bright, no broken wires, no greasy dirty and burrs, no scratches and scars, no jam in the process of use
Product purity: zinc content more than 99.995%
Diameter: 0.5mm-5.0mm
Package:20--50kg/bundle 15kg-20kg/shaft 50kg-250kg/barrel/drum
Materialdopt 0distillation zinc ingot produced by hulo island zinc co., ltd, zinc content more than 99.995%. The material used is strictly stick to national standards gb/470-2008
Characters:
1.The size and shape of spray will not be affected. You can spray on the whole surface, and also you can spray the limited surface which is convenient and economical to the parts of large conponents.
2.The parent material will not change. Because when spraying, the parent material will become small due to low temperature.
3.The thick of coating can be changed in large range from several microns to several millimeters
4.It can be sprayed to form shapes. Hot spraying technology can be used not only to form shape in the surface, but also to manufacture mechanical parts, that is spraying molding products.
Transportation storaget is forbidden to bring with acid, alkali, salt corrosion of zinc by packaging and transportation shipment, and it should be stored in dry, ventilated, non-corrosion material warehouse and keep out of rain.
Applications
The thermal spraying wire is used in a variety of applications, such as:
1.High-temperature oxidation protection used, for example, to resist gases in boiler atmospheres
2.Coatings to resist heat and prevent scaling of conventional low alloy steels
3.Bond coats for improving the adhesion of top coatings
4.Coatings on moulds in the glass industry
It is used in the flame spraying, arc spraying, supersonic plasma spraying, the ordinary plasma spraying.
whatsapp+8613722988404 sophiashen#canchunmetal.com
China manufacturer thermal spray zinc wire 99.995%
Pure zinc wire
The surface of the zinc wire is smooth and bright, no broken wires, no greasy dirty and burrs, no scratches and scars, no jam in the process of use
Product purity: zinc content more than 99.995%
Diameter: 1.0mm-4.0mm
Package20--5kg/bundle 15kg-20kg/shaft 50kg-250kg/barrel
Materialadopt 0 distillation zinc ingot produced by hulo island zinc co., ltd, zinc content more than 99.995%. The material used is strictly stick to national standards gb/470-2008
Characters:
1.The size and shape of spray will not be affected. You can spray on the whole surface, and also you can spray the limited surface which is convenient and economical to the parts of large conponents.
2.The parent material will not change. Because when spraying, the parent material will become small due to low temperature.
3.The thick of coating can be changed in large range from several microns to several millimeters
4.It can be sprayed to form shapes. Hot spraying technology can be used not only to form shape in the surface, but also to manufacture mechanical parts, that is spraying molding products.
Transportation storageit is forbidden to bring with acid, alkali, salt corrosion of zinc by packaging and transportation shipment, and it should be stored in dry, ventilated, non-corrosion material warehouse and keep out of rain.
Applications
The thermal spraying wire is used in a variety of applications, such as:
1.High-temperature oxidation protection used, for example, to resist gases in boiler atmospheres
2.Coatings to resist heat and prevent scaling of conventional low alloy steels
3.Bond coats for improving the adhesion of top coatings
4.Coatings on moulds in the glass industry
It is used in the flame spraying, arc spraying, supersonic plasma spraying, the ordinary plasma spraying.
Contact
Pure zinc wire
The surface of the zinc wire is smooth and bright, no broken wires, no greasy dirty and burrs, no scratches and scars, no jam in the process of use
Product purity: zinc content more than 99.995%
Diameter: 1.0mm-4.0mm
Package:20--5kg/bundle 15kg-20kg/shaft 50kg-250kg/barrel
Material: adopt 0# distillation zinc ingot produced by hulo island zinc co., ltd, zinc content more than 99.995%. The material used is strictly stick to national standards gb/470-2008
Characters:
1.The size and shape of spray will not be affected. You can spray on the whole surface, and also you can spray the limited surface which is convenient and economical to the parts of large conponents.
2.The parent material will not change. Because when spraying, the parent material will become small due to low temperature.
3.The thick of coating can be changed in large range from several microns to several millimeters
4.It can be sprayed to form shapes. Hot spraying technology can be used not only to form shape in the surface, but also to manufacture mechanical parts, that is spraying molding products.
Transportation storageit is forbidden to bring with acid, alkali, salt corrosion of zinc by packaging and transportation shipment, and it should be stored in dry, ventilated, non-corrosion material warehouse and keep out of rain.
Applications
The thermal spraying wire is used in a variety of applications, such as:
1.High-temperature oxidation protection used, for example, to resist gases in boiler atmospheres
2.Coatings to resist heat and prevent scaling of conventional low alloy steels
3.Bond coats for improving the adhesion of top coatings
4.Coatings on moulds in the glass industry
It is used in the flame spraying, arc spraying, supersonic plasma spraying, the ordinary plasma spraying.
2.5mm 1.6mm 1.2mm metalizing zinc wire
Pure zinc wire
The surface of the zinc wire is smooth and bright, no broken wires, no greasy dirty and burrs, no scratches and scars, no jam in the process of use
Product purity: zinc content more than 99.995%
Diameter: 1.0mm-4.0mm
Package:20--5kg/bundle 15kg-20kg/shaft 50kg-250kg/barrel
Material: adopt 0distillation zinc ingot , zinc content more than 99.995%. The material used is strictly stick to national standards gb/470-2008
Characters:
1.The size and shape of spray will not be affected. You can spray on the whole surface, and also you can spray the limited surface which is convenient and economical to the parts of large conponents.
2.The parent material will not change. Because when spraying, the parent material will become small due to low temperature.
3.The thick of coating can be changed in large range from several microns to several millimeters
4.It can be sprayed to form shapes. Hot spraying technology can be used not only to form shape in the surface, but also to manufacture mechanical parts, that is spraying molding products.
Transportation storageit is forbidden to bring with acid, alkali, salt corrosion of zinc by packaging and transportation shipment, and it should be stored in dry, ventilated, non-corrosion material warehouse and keep out of rain.
Applications
The thermal spraying wire is used in a variety of applications, such as:
1.High-temperature oxidation protection used, for example, to resist gases in boiler atmospheres
2.Coatings to resist heat and prevent scaling of conventional low alloy steels
3.Bond coats for improving the adhesion of top coatings
4.Coatings on moulds in the glass industry
Pure zinc thermal spray wire for arc spray
Pure zinc wire
The surface of the zinc wire is smooth and bright, no broken wires, no greasy dirty and burrs, no scratches and scars, no jam in the process of use
Product purity: zinc content more than 99.995%
Diameter: 1.0mm-4.0mm
Package:20--5kg/bundle 15kg-20kg/shaft 50kg-250kg/barrel
Material: adopt 0# distillation zinc ingot produced by hulo island zinc co., ltd, zinc content more than 99.995%. The material used is strictly stick to national standards gb/470-2008
Characters:
1.The size and shape of spray will not be affected. You can spray on the whole surface, and also you can spray the limited surface which is convenient and economical to the parts of large components.
2.The parent material will not change. Because when spraying, the parent material will become small due to low temperature.
3.The thick of coating can be changed in large range from several microns to several millimeters
4.It can be sprayed to form shapes. Hot spraying technology can be used not only to form shape in the surface, but also to manufacture mechanical parts, that is spraying molding products.
Transportation storageï¼?it is forbidden to bring with acid, alkali, salt corrosion of zinc by packaging and transportation shipment, and it should be stored in dry, ventilated, non-corrosion material warehouse and keep out of rain.
Applications
The thermal spraying wire is used in a variety of applications, such as:
1.High-temperature oxidation protection used, for example, to resist gases in boiler atmospheres
2.Coatings to resist heat and prevent scaling of conventional low alloy steels
3.Bond coats for improving the adhesion of top coatings
4.Coatings on moulds in the glass industry
It is used in the flame spraying, arc spraying, supersonic plasma spraying, the ordinary plasma spraying.
Pure zinc wire / zinc wire suppliers
The surface of the zinc wire is smooth and bright, no broken wires, no greasy dirty and burrs, no scratches and scars, no jam in the process of use
Product purity: zinc content more than 99.995%
Diameter: 1.0mm-4.0mm
Package:20--5kg/bundle 15kg-20kg/shaft 50kg-250kg/barrel
Material: adopt 0# distillation zinc ingot produced by hulo island zinc co., ltd, zinc content more than 99.995%. The material used is strictly stick to national standards gb/470-2008
Characters:
1.The size and shape of spray will not be affected. You can spray on the whole surface, and also you can spray the limited surface which is convenient and economical to the parts of large conponents.
2.The parent material will not change. Because when spraying, the parent material will become small due to low temperature.
3.The thick of coating can be changed in large range from several microns to several millimeters
4.It can be sprayed to form shapes. Hot spraying technology can be used not only to form shape in the surface, but also to manufacture mechanical parts, that is spraying molding products.
Transportation storageï¼?it is forbidden to bring with acid, alkali, salt corrosion of zinc by packaging and transportation shipment, and it should be stored in dry, ventilated, non-corrosion material warehouse and keep out of rain.
Applications
The thermal spraying wire is used in a variety of applications, such as:
1.High-temperature oxidation protection used, for example, to resist gases in boiler atmospheres
2.Coatings to resist heat and prevent scaling of conventional low alloy steels
3.Bond coats for improving the adhesion of top coatings
4.Coatings on moulds in the glass industry
Pure zinc wire /zinc wire brands
The surface of the zinc wire is smooth and bright, no broken wires, no greasy dirty and burrs, no scratches and scars, no jam in the process of use
Product purity: zinc content more than 99.995%
Diameter: 1.0mm-4.0mm
Package:20--5kg/bundle 15kg-20kg/shaft 50kg-250kg/barrel
Material: adopt 0# distillation zinc ingot produced by hulo island zinc co., ltd, zinc content more than 99.995%. The material used is strictly stick to national standards gb/470-2008
Characters:
1.The size and shape of spray will not be affected. You can spray on the whole surface, and also you can spray the limited surface which is convenient and economical to the parts of large conponents.
2.The parent material will not change. Because when spraying, the parent material will become small due to low temperature.
3.The thick of coating can be changed in large range from several microns to several millimeters
4.It can be sprayed to form shapes. Hot spraying technology can be used not only to form shape in the surface, but also to manufacture mechanical parts, that is spraying molding products.
Transportation storageï¼?it is forbidden to bring with acid, alkali, salt corrosion of zinc by packaging and transportation shipment, and it should be stored in dry, ventilated, non-corrosion material warehouse and keep out of rain.
Applications
The thermal spraying wire is used in a variety of applications, such as:
1.High-temperature oxidation protection used, for example, to resist gases in boiler atmospheres
2.Coatings to resist heat and prevent scaling of conventional low alloy steels
3.Bond coats for improving the adhesion of top coatings
4.Coatings on moulds in the glass industry
It is used in the flame spraying, arc spraying, supersonic plasma spraying, the ordinary plasma spraying.
Pure zinc wire / wholesale zinc wire 3.17mm zinc wire
The surface of the zinc wire is smooth and bright, no broken wires, no greasy dirty and burrs, no scratches and scars, no jam in the process of use
Product purity: zinc content more than 99.995%
Diameter: 1.0mm-4.0mm
Package:20--5kg/bundle 15kg-20kg/shaft 50kg-250kg/barrel
Material: adopt 0# distillation zinc ingot produced by hulo island zinc co., ltd, zinc content more than 99.995%. The material used is strictly stick to national standards gb/470-2008
Characters:
1.The size and shape of spray will not be affected. You can spray on the whole surface, and also you can spray the limited surface which is convenient and economical to the parts of large conponents.
2.The parent material will not change. Because when spraying, the parent material will become small due to low temperature.
3.The thick of coating can be changed in large range from several microns to several millimeters
4.It can be sprayed to form shapes. Hot spraying technology can be used not only to form shape in the surface, but also to manufacture mechanical parts, that is spraying molding products.
Transportation storageï¼?it is forbidden to bring with acid, alkali, salt corrosion of zinc by packaging and transportation shipment, and it should be stored in dry, ventilated, non-corrosion material warehouse and keep out of rain.
Applications
The thermal spraying wire is used in a variety of applications, such as:
1.High-temperature oxidation protection used, for example, to resist gases in boiler atmospheres
2.Coatings to resist heat and prevent scaling of conventional low alloy steels
3.Bond coats for improving the adhesion of top coatings
4.Coatings on moulds in the glass industry
It is used in the flame spraying, arc spraying, supersonic plasma spraying, the ordinary plasma spraying.
Pure zinc wire /high-quality zinc wire
The surface of the zinc wire is smooth and bright, no broken wires, no greasy dirty and burrs, no scratches and scars, no jam in the process of use
Product purity: zinc content more than 99.995%
Diameter: 1.0mm-4.0mm
Package:20--5kg/bundle 15kg-20kg/shaft 50kg-250kg/barrel
Material: adopt 0# distillation zinc ingot produced by hulo island zinc co., ltd, zinc content more than 99.995%. The material used is strictly stick to national standards gb/470-2008
Characters:
1.The size and shape of spray will not be affected. You can spray on the whole surface, and also you can spray the limited surface which is convenient and economical to the parts of large conponents.
2.The parent material will not change. Because when spraying, the parent material will become small due to low temperature.
3.The thick of coating can be changed in large range from several microns to several millimeters
4.It can be sprayed to form shapes. Hot spraying technology can be used not only to form shape in the surface, but also to manufacture mechanical parts, that is spraying molding products.
Transportation storageit is forbidden to bring with acid, alkali, salt corrosion of zinc by packaging and transportation shipment, and it should be stored in dry, ventilated, non-corrosion material warehouse and keep out of rain.
Applications
The thermal spraying wire is used in a variety of applications, such as:
1.High-temperature oxidation protection used, for example, to resist gases in boiler atmospheres
2.Coatings to resist heat and prevent scaling of conventional low alloy steels
3.Bond coats for improving the adhesion of top coatings
4.Coatings on moulds in the glass industry
It is used in the flame spraying, arc spraying, supersonic plasma spraying, the ordinary plasma spraying.
Zinc wire manufacturers
Pure zinc wire
The surface of the zinc wire is smooth and bright, no broken wires, no greasy dirty and burrs, no scratches and scars, no jam in the process of use
Product purity: zinc content more than 99.995%
Diameter: 1.0mm-4.0mm
Package:20--5kg/bundle 15kg-20kg/shaft 50kg-250kg/barrel
Material: adopt 0# distillation zinc ingot produced by hulo island zinc co., ltd, zinc content more than 99.995%. The material used is strictly stick to national standards gb/470-2008
Characters:
1.The size and shape of spray will not be affected. You can spray on the whole surface, and also you can spray the limited surface which is convenient and economical to the parts of large conponents.
2.The parent material will not change. Because when spraying, the parent material will become small due to low temperature.
3.The thick of coating can be changed in large range from several microns to several millimeters
4.It can be sprayed to form shapes. Hot spraying technology can be used not only to form shape in the surface, but also to manufacture mechanical parts, that is spraying molding products.
Transportation storageï¼?it is forbidden to bring with acid, alkali, salt corrosion of zinc by packaging and transportation shipment, and it should be stored in dry, ventilated, non-corrosion material warehouse and keep out of rain.
Applications
The thermal spraying wire is used in a variety of applications, such as:
1.High-temperature oxidation protection used, for example, to resist gases in boiler atmospheres
2.Coatings to resist heat and prevent scaling of conventional low alloy steels
3.Bond coats for improving the adhesion of top coatings
4.Coatings on moulds in the glass industry
It is used in the flame spraying, arc spraying, supersonic plasma spraying, the ordinary plasma spraying.
Zinc wire manufacturers
Pure zinc wire
The surface of the zinc wire is smooth and bright, no broken wires, no greasy dirty and burrs, no scratches and scars, no jam in the process of use
Product purity: zinc content more than 99.995%
Diameter: 1.0mm-4.0mm
Package:20--5kg/bundle 15kg-20kg/shaft 50kg-250kg/barrel
Material: adopt 0# distillation zinc ingot produced by hulo island zinc co., ltd, zinc content more than 99.995%. The material used is strictly stick to national standards gb/470-2008
Characters:
1.The size and shape of spray will not be affected. You can spray on the whole surface, and also you can spray the limited surface which is convenient and economical to the parts of large conponents.
2.The parent material will not change. Because when spraying, the parent material will become small due to low temperature.
3.The thick of coating can be changed in large range from several microns to several millimeters
4.It can be sprayed to form shapes. Hot spraying technology can be used not only to form shape in the surface, but also to manufacture mechanical parts, that is spraying molding products.
Transportation storageï¼?it is forbidden to bring with acid, alkali, salt corrosion of zinc by packaging and transportation shipment, and it should be stored in dry, ventilated, non-corrosion material warehouse and keep out of rain.
Applications
The thermal spraying wire is used in a variety of applications, such as:
1.High-temperature oxidation protection used, for example, to resist gases in boiler atmospheres
2.Coatings to resist heat and prevent scaling of conventional low alloy steels
3.Bond coats for improving the adhesion of top coatings
4.Coatings on moulds in the glass industry
It is used in the flame spraying, arc spraying, supersonic plasma spraying, the ordinary plasma spraying.
wire arc spraying zinc wire
The surface of the zinc wire is smooth and bright, no broken wires, no greasy dirty and burrs, no scratches and scars, no jam in the process of use
Product purity: zinc content more than 99.995%
Diameter: 1.0mm-4.0mm
Package:20--5kg/bundle 15kg-20kg/shaft 50kg-250kg/barrel
Material: adopt 0 distillation zinc ingot produced by hulo island zinc co., ltd, zinc content more than 99.995%. The material used is strictly stick to national standards gb/470-2008
Characters:
1.The size and shape of spray will not be affected. You can spray on the whole surface, and also you can spray the limited surface which is convenient and economical to the parts of large conponents.
2.The parent material will not change. Because when spraying, the parent material will become small due to low temperature.
3.The thick of coating can be changed in large range from several microns to several millimeters
4.It can be sprayed to form shapes. Hot spraying technology can be used not only to form shape in the surface, but also to manufacture mechanical parts, that is spraying molding products.
Transportation storage it is forbidden to bring with acid, alkali, salt corrosion of zinc by packaging and transportation shipment, and it should be stored in dry, ventilated, non-corrosion material warehouse and keep out of rain.
Applications
The thermal spraying wire is used in a variety of applications, such as:
1.High-temperature oxidation protection used, for example, to resist gases in boiler atmospheres
2.Coatings to resist heat and prevent scaling of conventional low alloy steels
3.Bond coats for improving the adhesion of top coatings
4.Coatings on moulds in the glass industry
It is used in the flame spraying, arc spraying, supersonic plasma spraying, the ordinary plasma spraying.
Zinc aluminum alloy wire
The raw materials used in all 0# zinc distillation zinc ingot quality, high purity zinc, the zinc content of more than 99.995%, the strict implementation of national standard gb/t470-2008;the raw material aluminum ingot all uses the high-quality aluminum ingot, the aluminum ingot purity is high, the aluminum content above 99.8%, strictly carries out the national standard, the remelting uses the aluminum ingot gb/t1196 - 2008
Characters
1. Zinc aluminum alloy coatings have similar stability with spraying aluminum coatings and the electrochemical protection as well as spraying zinc coating, zinc aluminum alloy coating is an ideal anticorrosion protective coating of sea water.
2. Compared with the zinc wire and pure aluminum wire, it's coating has coherence, the resistance to wear and corrosion resistivity is better as well as the construction of superior performance. The zinc aluminum alloy wire makes the sacrifice anode and sprays coating in the steel and iron component surface layerand it make the component service life lengthen 5-10 times
Specification
Znal content :zn :84-86% al :14-15%
Diameter of zinc aluminum alloy wire :1.2-10mm
Package :bundle (20-100kg)spool/axle(20kg)barrel(50-250kg)
Applicable to ductile pipes, dockyard, power capacitors, power tower, tower, container, derrick, bridges gate, tunnel framework, metal stents, large steel structure surface thermal spraying zinc corrosion protection industry.
Application
Zinc aluminum alloy wire is widely applied to thermal spraying anticorrosion, container, bridge, head frame, storage tank, electric iron tower, poles and towers, capacitor, metal bracket, nodular cast iron pipe, traffic equipments, etc.
Pure zinc wire
The surface of the zinc wire is smooth and bright, no broken wires, no greasy dirty and burrs, no scratches and scars, no jam in the process of use
Product purity: zinc content more than 99.995%
Diameter: 1.0mm-4.0mm
Package20-25kg/bundle 15kg20kg/shaft 50kg250kg/barrel
Materialadopt 0# distillation zinc ingot produced by hulo island zinc co., ltd, zinc content more than 99.995%. The material used is strictly stick to national standards gb/470-2008
Characters:
1.The size and shape of spray will not be affected. You can spray on the whole surface, and also you can spray the limited surface which is convenient and economical to the parts of large conponents.
2.The parent material will not change. Because when spraying, the parent material will become small due to low temperature.
3.The thick of coating can be changed in large range from several microns to several millimeters
4.It can be sprayed to form shapes. Hot spraying technology can be used not only to form shape in the surface, but also to manufacture mechanical parts, that is spraying molding products.
Transportation storageit is forbidden to bring with acid, alkali, salt corrosion of zinc by packaging and transportation shipment, and it should be stored in dry, ventilated, non-corrosion material warehouse and keep out of rain.
Applications:
The thermal spraying wire is used in a variety of applications, such as:
1.High-temperature oxidation protection used, for example, to resist gases in boiler atmospheres
2.Coatings to resist heat and prevent scaling of conventional low alloy steels
3.Bond coats for improving the adhesion of top coatings
4.Coatings on moulds in the glass industry
It is used in the flame spraying, arc spraying, supersonic plasma spraying, the ordinary plasma spraying.
99.995% diameter 1.6mm zinc wire for metal
Pure zinc wire
The surface of the zinc wire is smooth and bright, no broken wires, no greasy dirty and burrs, no scratches and scars, no jam in the process of use
Product purity: zinc content more than 99.995%
Diameter: 1.0mm-5.0mm (1.4mm , 1.6mm, 2.0mm, 2.5mm, 3.17, 4.76mm..)
Package:20--50kg/bundle 15kg-20kg/shaft 50kg-250kg/barrel
Material: adopt 0# distillation zinc ingot produced by hulo island zinc co., ltd, zinc content more than 99.995%. The material used is strictly stick to national standards gb/470-2008
Characters:
1.The size and shape of spray will not be affected. You can spray on the whole surface, and also you can spray the limited surface which is convenient and economical to the parts of large conponents.
2.The parent material will not change. Because when spraying, the parent material will become small due to low temperature.
3.The thick of coating can be changed in large range from several microns to several millimeters
4.It can be sprayed to form shapes. Hot spraying technology can be used not only to form shape in the surface, but also to manufacture mechanical parts, that is spraying molding products.
Transportation storageï¼?it is forbidden to bring with acid, alkali, salt corrosion of zinc by packaging and transportation shipment, and it should be stored in dry, ventilated, non-corrosion material warehouse and keep out of rain.
Applications
The thermal spraying wire is used in a variety of applications, such as:
1.High-temperature oxidation protection used, for example, to resist gases in boiler atmospheres
2.Coatings to resist heat and prevent scaling of conventional low alloy steels
3.Bond coats for improving the adhesion of top coatings
4.Coatings on moulds in the glass industry
It is used in the flame spraying, arc spraying, supersonic plasma spraying, the ordinary plasma spraying.
Contact
Pure zinc wire /cheap zinc wire
The surface of the zinc wire is smooth and bright, no broken wires, no greasy dirty and burrs, no scratches and scars, no jam in the process of use
Product purity: zinc content more than 99.995%
Diameter: 1.0mm-4.0mm
Package:20--5kg/bundle 15kg-20kg/shaft 50kg-250kg/barrel
Material: adopt 0# distillation zinc ingot produced by hulo island zinc co., ltd, zinc content more than 99.995%. The material used is strictly stick to national standards gb/470-2008
Characters:
1.The size and shape of spray will not be affected. You can spray on the whole surface, and also you can spray the limited surface which is convenient and economical to the parts of large conponents.
2.The parent material will not change. Because when spraying, the parent material will become small due to low temperature.
3.The thick of coating can be changed in large range from several microns to several millimeters
4.It can be sprayed to form shapes. Hot spraying technology can be used not only to form shape in the surface, but also to manufacture mechanical parts, that is spraying molding products.
Transportation storaget is forbidden to bring with acid, alkali, salt corrosion of zinc by packaging and transportation shipment, and it should be stored in dry, ventilated, non-corrosion material warehouse and keep out of rain.
Applications
The thermal spraying wire is used in a variety of applications, such as:
1.High-temperature oxidation protection used, for example, to resist gases in boiler atmospheres
2.Coatings to resist heat and prevent scaling of conventional low alloy steels
3.Bond coats for improving the adhesion of top coatings
4.Coatings on moulds in the glass industry
It is used in the flame spraying, arc spraying, supersonic plasma spraying, the ordinary plasma spraying.
Drum zinc wire price
The surface of the zinc wire is smooth and bright, no broken wires, no greasy dirty and burrs, no scratches and scars, no jam in the process of use
Product purity: zinc content more than 99.995%
Diameter: 1.0mm-4.0mm
Package:20--5kg/bundle 15kg-20kg/shaft 50kg-250kg/barrel
Material: adopt 0# distillation zinc ingot produced by hulo island zinc co., ltd, zinc content more than 99.995%. The material used is strictly stick to national standards gb/470-2008
Characters:
1.The size and shape of spray will not be affected. You can spray on the whole surface, and also you can spray the limited surface which is convenient and economical to the parts of large conponents.
2.The parent material will not change. Because when spraying, the parent material will become small due to low temperature.
3.The thick of coating can be changed in large range from several microns to several millimeters
4.It can be sprayed to form shapes. Hot spraying technology can be used not only to form shape in the surface, but also to manufacture mechanical parts, that is spraying molding products.
Transportation storaget is forbidden to bring with acid, alkali, salt corrosion of zinc by packaging and transportation shipment, and it should be stored in dry, ventilated, non-corrosion material warehouse and keep out of rain.
Applications
The thermal spraying wire is used in a variety of applications, such as:
1.High-temperature oxidation protection used, for example, to resist gases in boiler atmospheres
2.Coatings to resist heat and prevent scaling of conventional low alloy steels
3.Bond coats for improving the adhesion of top coatings
4.Coatings on moulds in the glass industry
It is used in the flame spraying, arc spraying, supersonic plasma spraying, the ordinary plasma spraying.
Promotions zinc wire manufacturers
Pure zinc wire
The surface of the zinc wire is smooth and bright, no broken wires, no greasy dirty and burrs, no scratches and scars, no jam in the process of use
Product purity: zinc content more than 99.995%
Diameter: 1.0mm-4.0mm
Package:20--5kg/bundle 15kg-20kg/shaft 50kg-250kg/barrel
Material: adopt 0# distillation zinc ingot produced by hulo island zinc co., ltd, zinc content more than 99.995%. The material used is strictly stick to national standards gb/470-2008
Characters:
1.The size and shape of spray will not be affected. You can spray on the whole surface, and also you can spray the limited surface which is convenient and economical to the parts of large conponents.
2.The parent material will not change. Because when spraying, the parent material will become small due to low temperature.
3.The thick of coating can be changed in large range from several microns to several millimeters
4.It can be sprayed to form shapes. Hot spraying technology can be used not only to form shape in the surface, but also to manufacture mechanical parts, that is spraying molding products.
Transportation storageit is forbidden to bring with acid, alkali, salt corrosion of zinc by packaging and transportation shipment, and it should be stored in dry, ventilated, non-corrosion material warehouse and keep out of rain.
Applications
The thermal spraying wire is used in a variety of applications, such as:
1.High-temperature oxidation protection used, for example, to resist gases in boiler atmospheres
2.Coatings to resist heat and prevent scaling of conventional low alloy steels
3.Bond coats for improving the adhesion of top coatings
4.Coatings on moulds in the glass industry
It is used in the flame spraying, arc spraying, supersonic plasma spraying, the ordinary plasma spraying.
Zinc Wire for corrosion protection
The surface of the zinc wire is smooth and bright, no broken wires, no greasy dirty and burrs, no scratches and scars, no jam in the process of use
Product purity: zinc content more than 99.995%
Diameter: 1.0mm-4.0mm
Package:20--5kg/bundle 15kg-20kg/shaft 50kg-250kg/barrel
Material: adopt 0# distillation zinc ingot produced by hulo island zinc co., ltd, zinc content more than 99.995%. The material used is strictly stick to national standards gb/470-2008
Characters:
1.The size and shape of spray will not be affected. You can spray on the whole surface, and also you can spray the limited surface which is convenient and economical to the parts of large conponents.
2.The parent material will not change. Because when spraying, the parent material will become small due to low temperature.
3.The thick of coating can be changed in large range from several microns to several millimeters
4.It can be sprayed to form shapes. Hot spraying technology can be used not only to form shape in the surface, but also to manufacture mechanical parts, that is spraying molding products.
Transportation storage�?it is forbidden to bring with acid, alkali, salt corrosion of zinc by packaging and transportation shipment, and it should be stored in dry, ventilated, non-corrosion material warehouse and keep out of rain.
Applications
The thermal spraying wire is used in a variety of applications, such as:
1.High-temperature oxidation protection used, for example, to resist gases in boiler atmospheres
2.Coatings to resist heat and prevent scaling of conventional low alloy steels
3.Bond coats for improving the adhesion of top coatings
4.Coatings on moulds in the glass industry
It is used in the flame spraying, arc spraying, supersonic plasma spraying, the ordinary plasma spraying.
Spray zinc wire factory
Pure zinc wire
The surface of the zinc wire is smooth and bright, no broken wires, no greasy dirty and burrs, no scratches and scars, no jam in the process of use
Product purity: zinc content more than 99.995%
Diameter: 1.0mm-4.0mm
Package:20--5kg/bundle 15kg-20kg/shaft 50kg-250kg/barrel
Material: adopt 0# distillation zinc ingot produced by hulo island zinc co., ltd, zinc content more than 99.995%. The material used is strictly stick to national standards gb/470-2008
Characters:
1.The size and shape of spray will not be affected. You can spray on the whole surface, and also you can spray the limited surface which is convenient and economical to the parts of large conponents.
2.The parent material will not change. Because when spraying, the parent material will become small due to low temperature.
3.The thick of coating can be changed in large range from several microns to several millimeters
4.It can be sprayed to form shapes. Hot spraying technology can be used not only to form shape in the surface, but also to manufacture mechanical parts, that is spraying molding products.
Transportation storageï¼?it is forbidden to bring with acid, alkali, salt corrosion of zinc by packaging and transportation shipment, and it should be stored in dry, ventilated, non-corrosion material warehouse and keep out of rain.
Applications
The thermal spraying wire is used in a variety of applications, such as:
1.High-temperature oxidation protection used, for example, to resist gases in boiler atmospheres
2.Coatings to resist heat and prevent scaling of conventional low alloy steels
3.Bond coats for improving the adhesion of top coatings
4.Coatings on moulds in the glass industry
It is used in the flame spraying, arc spraying, supersonic plasma spraying, the ordinary plasma spraying.
Cheap zinc wire
Pure zinc wire
The surface of the zinc wire is smooth and bright, no broken wires, no greasy dirty and burrs, no scratches and scars, no jam in the process of use
Product purity: zinc content more than 99.995%
Diameter: 1.0mm-4.0mm
Package:20--5kg/bundle 15kg-20kg/shaft 50kg-250kg/barrel
Material: adopt 0 distillation zinc ingot produced by hulo island zinc co., ltd, zinc content more than 99.995%. The material used is strictly stick to national standards gb/470-2008
Characters:
1.The size and shape of spray will not be affected. You can spray on the whole surface, and also you can spray the limited surface which is convenient and economical to the parts of large conponents.
2.The parent material will not change. Because when spraying, the parent material will become small due to low temperature.
3.The thick of coating can be changed in large range from several microns to several millimeters
4.It can be sprayed to form shapes. Hot spraying technology can be used not only to form shape in the surface, but also to manufacture mechanical parts, that is spraying molding products.
Transportation storageï¼?it is forbidden to bring with acid, alkali, salt corrosion of zinc by packaging and transportation shipment, and it should be stored in dry, ventilated, non-corrosion material warehouse and keep out of rain.
Applications
The thermal spraying wire is used in a variety of applications, such as:
1.High-temperature oxidation protection used, for example, to resist gases in boiler atmospheres
2.Coatings to resist heat and prevent scaling of conventional low alloy steels
3.Bond coats for improving the adhesion of top coatings
4.Coatings on moulds in the glass industry
It is used in the flame spraying, arc spraying, supersonic plasma spraying, the ordinary plasma spraying.
Zinc wire brand
Pure zinc wire
The surface of the zinc wire is smooth and bright, no broken wires, no greasy dirty and burrs, no scratches and scars, no jam in the process of use
Product purity: zinc content more than 99.995%
Diameter: 1.0mm-4.0mm
Package:20--5kg/bundle 15kg-20kg/shaft 50kg-250kg/barrel
Material: adopt 0distillation zinc ingot produced by hulo island zinc co., ltd, zinc content more than 99.995%. The material used is strictly stick to national standards gb/470-2008
Characters:
1.The size and shape of spray will not be affected. You can spray on the whole surface, and also you can spray the limited surface which is convenient and economical to the parts of large conponents.
2.The parent material will not change. Because when spraying, the parent material will become small due to low temperature.
3.The thick of coating can be changed in large range from several microns to several millimeters
4.It can be sprayed to form shapes. Hot spraying technology can be used not only to form shape in the surface, but also to manufacture mechanical parts, that is spraying molding products.
Transportation storageït is forbidden to bring with acid, alkali, salt corrosion of zinc by packaging and transportation shipment, and it should be stored in dry, ventilated, non-corrosion material warehouse and keep out of rain.
Applications
The thermal spraying wire is used in a variety of applications, such as:
1.High-temperature oxidation protection used, for example, to resist gases in boiler atmospheres
2.Coatings to resist heat and prevent scaling of conventional low alloy steels
3.Bond coats for improving the adhesion of top coatings
4.Coatings on moulds in the glass industry
It is used in the flame spraying, arc spraying, supersonic plasma spraying, the ordinary plasma spraying.
Pure zinc wire /zinc wire price
The surface of the zinc wire is smooth and bright, no broken wires, no greasy dirty and burrs, no scratches and scars, no jam in the process of use
Product purity: zinc content more than 99.995%
Diameter: 1.0mm-4.0mm
Package:20--5kg/bundle 15kg-20kg/shaft 50kg-250kg/barrel
Material: adopt 0# distillation zinc ingot produced by hulo island zinc co., ltd, zinc content more than 99.995%. The material used is strictly stick to national standards gb/470-2008
Characters:
1.The size and shape of spray will not be affected. You can spray on the whole surface, and also you can spray the limited surface which is convenient and economical to the parts of large conponents.
2.The parent material will not change. Because when spraying, the parent material will become small due to low temperature.
3.The thick of coating can be changed in large range from several microns to several millimeters
4.It can be sprayed to form shapes. Hot spraying technology can be used not only to form shape in the surface, but also to manufacture mechanical parts, that is spraying molding products.
Transportation storageï¼?it is forbidden to bring with acid, alkali, salt corrosion of zinc by packaging and transportation shipment, and it should be stored in dry, ventilated, non-corrosion material warehouse and keep out of rain.
Applications
The thermal spraying wire is used in a variety of applications, such as:
1.High-temperature oxidation protection used, for example, to resist gases in boiler atmospheres
2.Coatings to resist heat and prevent scaling of conventional low alloy steels
3.Bond coats for improving the adhesion of top coatings
4.Coatings on moulds in the glass industry
It is used in the flame spraying, arc spraying, supersonic plasma spraying, the ordinary plasma spraying.
Zinc wire manufacturers
Pure zinc wire
The surface of the zinc wire is smooth and bright, no broken wires, no greasy dirty and burrs, no scratches and scars, no jam in the process of use
Product purity: zinc content more than 99.995%
Diameter: 1.0mm-4.0mm
Package:20--5kg/bundle 15kg-20kg/shaft 50kg-250kg/barrel
Material: adopt 0 distillation zinc ingot produced by hulo island zinc co., ltd, zinc content more than 99.995%. The material used is strictly stick to national standards gb/470-2008
Characters:
1.The size and shape of spray will not be affected. You can spray on the whole surface, and also you can spray the limited surface which is convenient and economical to the parts of large conponents.
2.The parent material will not change. Because when spraying, the parent material will become small due to low temperature.
3.The thick of coating can be changed in large range from several microns to several millimeters
4.It can be sprayed to form shapes. Hot spraying technology can be used not only to form shape in the surface, but also to manufacture mechanical parts, that is spraying molding products.
Transportation storageï¼?it is forbidden to bring with acid, alkali, salt corrosion of zinc by packaging and transportation shipment, and it should be stored in dry, ventilated, non-corrosion material warehouse and keep out of rain.
Applications
The thermal spraying wire is used in a variety of applications, such as:
1.High-temperature oxidation protection used, for example, to resist gases in boiler atmospheres
2.Coatings to resist heat and prevent scaling of conventional low alloy steels
3.Bond coats for improving the adhesion of top coatings
4.Coatings on moulds in the glass industry
It is used in the flame spraying, arc spraying, supersonic plasma spraying, the ordinary plasma spraying.
Zinc anode / zinc sacrificial anodes
Character
Zinc anode has the characteristics of high purity, bright color, compact structure, no slag and no holes. It has good conductivity, corrosion resistance, uniform dissolution and long service life.
Specification
Size: zinc anodes can be provided in different shapes according to your requirement, such as rectangle, square, bracelet-shape and other abnormal shapes and so on (thickness 10-200mm, length 50-2000mm)
Zinc content :not less 99.995%
Package :wooden case
Application
Sacrificial anode for hull cathodic protection
Sacrificial anode for cathodic protection of ship ballast tank
Sacrificial anode for cathodic protection for port and marine engineering facilities
Sacrificial anode for cathodic protection of sea water cooling water system
Sacrificial anode for cathodic protection of storage tank in storage tank
Sacrificial anode for cathodic protection of buried pipelines
Zinc aluminum cadmium alloy sacrificial anode
Transportation and storage
Wrapped with acid, alkali or salt that may corrode zinc are forbidden. It should be stored in a dry and ventilated storeroom which is free of corrosive substance and be protected from rain.
whatsapp+8613722988404 sophiashen#canchunmetal.com
Oval wire also called Hot dipped galvanized oval wire , high resistance oval wire, high resistance galvanized oval steel wire , alambre alta resistencia is made from high quality steel wire by redrawn equipment. they are widely used in South America market.
Material
High carbon rod SAE1045,SAE1055,SAE1065 or low carbon Q195
Application
Mainly used for cattle frame to keep the cattle
Tensile Strength:600KGF-1550KGF
Packaging Detail
Plastic films inside and wove bag
Oval wire also called hot dipped galvanized oval wire , high resistance oval wire, high resistance galvanized oval steel wire , alambre alta resistencia is made from high quality steel wire by redrawn equipment. They are widely used in south america market.
Material
High carbon rod sae1045, sae1055, sae1065 or low carbon q195
Application
Mainly used for cattle frame to keep the cattle
Tensile strength:600kgf-1550kgf
Packaging detail
Plastic films inside and wove bag
Specification
17/15 16/14 15/13
z
