Aluminum-plastic panel recycling equipment/ aluminum-plastic separator
Aluminum-plastic plate recycling (separation of aluminum-plastic plate, aluminum-plastic pipe ) : not only is the technology used for various polyethylene aluminum-plastic plate , poly chlorine aluminum-plastic plate, aluminum-plastic pipe, aluminum-plastic bottle cap, automobile decorations, but it is used for cooper-plastic materials such as various of wires and cables and so on . The materials is sent to the large crusher directly by hook machine, then pass though secondary crushing, tertiary grinding powder decomposition and vibrating screen.The material decomposed are separated into plastic and metal in one time by the six -roller electric separator.It is a technology with low cost and high efficiency and recovery rate can reach 99.8%. It adopts physical method , namely , dry method separation , which doesn’t involve the heating, fire, water and other chemical raw materials, therefore no pollution will be produced. Our company has four patents in the process, patent number: 200810141172.5, 200810141174.4, 200820148814 and 200910249968.7 x.
Production line features:
1?the machine can separate directly for the following materials :for the whole piece of aluminum-plastic sheet, width is less than 180 cm, thickness is less than 14 mm, for the various of lumps , diameter less is than180 cm.
2?all production lines are mechanical automation operation, only need to 1-2 people, reducing the consumption of human resources.
3?there are many feeding bins in the production line, if one part of them breakdown, it does not affect other parts run normally.
4?this production line is used widely for different conductivity compounds of metal and nonmetal, they are all separated with exchanging screen meshes and adjusting all parts of equipment.
5?production line installation is convenient with a variety of assembly method, can adapt to different venues.
Aluminum-plastic panel recycling equipment/ aluminum-plastic separator
Abs separation equipment
Abs separation equipment are suitable for all kinds of automobile abs electroplating and life with abs electroplating materials, can also be used for aluminum composite pipe, copper sheet metal, plastic, and decorations, wire and cable, cable car seal skin, plastics extrusion machine filter, all kinds of metal and nonmetal compound separation recycling, metal recovery rate can reach 99.8%, plastic around 99.9% purity. The process of physical separation, without heating, fire, water and chemical raw materials, room temperature dry separation without any pollution, low cost, high efficiency. This process have won four national patents patent were 200810141172.5, 200810141172.5, 200810141172.5 and 200910249969.7 x.
Company commitment: the company has sales of abs sorting device has a perfect after-sale service, one year warranty, life-long maintenance, thoroughly solve your trouble back at home, please rest assured purchase!
Abs separation equipment
Abs grinder | ppr mill grinder | abs price
Working principle:
The material and air flow are rotating with the high speed rotation when the equipment is running.The materials are crushed by the strong air pressure, strong shear force and fierce impact with each other on the grinding block composed of turbine rotor and abrasive bricks of the sieve circle.It is on the basis of the airflow and the machine, and turn into the products such as uniform particle, small particle size distribution range.
The performance and feature
The machine has many advantages, including low energy consumption, high efficiency, long life, easy maintenance and change parts and so on. Especially for the powder separation of the combination or compound of metal and nonmetal.It can make all kinds of metal into a round ball, this is good use for electrostatic and separation.The patent of this machine is zl200820148816.9.
Applicable scope
This machine is widely used to all kinds of materials under the medium hardness , such as the plastic (polyethylene, polyester, polypropylene, polyvinyl chloride, polyethylene, polypropylene, nylon, pom, etc.), rubber, chemical dyes (salt, pigment, gesso, paint, kaolin, etc.), pesticide, medicine, food, feed, non-ferrous metals (copper, aluminum, iron, magnesium, etc.) or nonmetallic minerals (such as asbestos, glass, clay, etc.) and so on .
Abs grinder | ppr mill grinder | abs price
Lithium battery handling equipment
Lithium battery handling equipment used for recycling waste lithium battery, battery, so as to use such as resource recycle flow approach is the theme of the environmental protection, the assembly line, production stable operation, large output, province electricity, artificial, and the advantages of beautiful and easy, lithium battery in the process of production of all kinds of harmful gases after spray tower, air filtration and activated carbon treatment for discharging standard, the production process all the required water recycling, no effluent water sources, and in the process of circulating water after precipitation, filtration and adding chemicals for water treatment. The process of production equipment does not exceed 70 db noise, all comply with national environmental requirements. Automating a full set of assembly line production, the processing of 1.5 tons per hour of lithium batteries, the operation only 2-3 people.
Lithium battery handling equipment through the water type suction machine, magnetic separation, winnowing machine, water type friction machine, eddy current separator, heavy medium separation machine equipment will become waste lithium batteries sorting: plastic film, iron, aluminum, stainless steel, molded case, copper foil, aluminum foil, graphite sundry, plastic debris and blister packaging and other 10 kinds of materials, material separation purity can reach 94% - 99%.
Company commitment: the company has sales of lithium battery handling equipment has a perfect after-sales service, one year warranty, life-long maintenance, thoroughly solve your trouble back at home, please rest assured purchase!
Lithium battery handling equipment
Plastic bottle recycling / pet sorting / pvc sorting / pet washing
Our company developments and manufactures automatic assembly line of pet bottle recycling, by eddy current separation, light separation and air separation processes, sorting out the pvc, pp, pe, pet bottles label, metal, sand and other sundry from the pet bottle , to get high purity of pet bottles.All water used in this production line is circulation water, reducing the emissions of sewage.It adopts frequency control and plc automation according to the impurity content of different materials to adjust the speed automatically.It has the features with full automatic production, low power consumption, high efficiency, low noise, less covers, no pollution, etc. Bottle flakes made in this production line can use directly in the chemical fiber industry, pet bottle flakes are mainly used for the production of 2 d or 3 d polyester staple fiber, polyester filament, packaging tapes, sheet, film, etc.
Main equipment of plastic bottle sorting-recycling production line: automatic unpacking, scattered, conveyor, magnetic separation, eddy current separation, taking off tags, washing, spectral separation or artificial separation, wet crushing, washing, multistage winnowing to get rid of sand, crushing metal, floating material, dehydration, air separation, automatic packaging process and so on.
Plastic bottle recycling / pet sorting / pvc sorting / pet washing
Crusher / pulverizer / splayed crusher / plastic crusher / plastic pulverizer
Crusher (the other name: pulverizer, plastic pulverizer, eight-lane crusher ) applies to all kinds of non-ferrous metal and non-metallic materials such as plastic, rubber, basin, and are used in medicine, chemical, agricultural chemicals, food industries.
This machine adopts three layer separation design, easy maintenance and cleaning; the blades in the rotor forming the shape like word’eight”, with the features of high crushing ability, low energy consumption, low noise, easy operation and good stability.In addition, it is equipped with automatic feeding device, which can reduce the labor intensity and improve efficiency.
Crusher / pulverizer / splayed crusher / plastic crusher / plastic pulverizer
Waste bottles separation equipment, bottle material sorting crusher
Bottle bottle material sorting crusher is suitable for various life drinking bottle sorting (of metal, plastic bottles, packaging bottles after living garbage sorting all applicable) such as a full range of process needs 2-3 person, intermediate link without any artificial manual sorting, can put the material divided into iron, aluminum, plastic, stainless steel, glass, paper, etc., and then the direct hydraulic metal packaging and plastic crushing directly, and the waste gas processing in the process of production. The equipment operation covers an area of small, low noise, no air pollution, simple operation and so on are widely used.
Waste bottles separation equipment, bottle material sorting crusher
Aluminum-plastic package separation and recycling
Separation and recycling of aluminum plastic packing(separation of aluminum plastic compound) is used for various aluminum-plastic composite packaging , bottle caps and toothpaste tubes, whose thickness is less than 2mm.With the advantages complete separation, safty high efficiency, it doesn’t produce waste water and materials and the water and chemical materials can be both be recycled and used completely, realizing the industrial automation production. This technology is adequate for large recycling production line, the full set of operation only need three or four people. This technology contains two patents, patent no. : 200910227379.9 and 200910227474.9.
Company commitment: the company has sales of aluminum - plastic package separation and process has a perfect after-sales service, one year warranty, life-long maintenance, thoroughly solve your trouble back at home, please rest assured purchase!
Aluminum-plastic package separation and recycling
Electrical components dismantling equipment
The new type circuit boards separation equipment is adjust to recycle kinds of e-waste scrap such as circuit boards witn components, circuit boards, electrical scrap(mobile phone boards, tv boards, computer boards, washing machine boards, refrigerator boards), fpc flexible circuit boards etc.This technology process flow through feeding, first crushing, magnetic separating, suction wind separating, second crushing, wind separating, gravity separating, third crushing, electric separating, dust collecting.This technology could process the circuit boards with electric components in the equipment without dismantling, separate metal and non metal and wind separate recycle the aluminum foil, plastic film that in the capacitance or electrical components.The metal recycling rate could reach above 99%.Automatically operating through feeding and separating, 400t/day capacity, only need 1-2 people to operate.This technology adopts physical , namely, dry method separation without heating, fire, water , chemical material and any pollution, high efficiency, low cost.
Features:
1, this technology adopts advanced mechanical crushing and high voltage electrostatic separating.Separating metal and non metal after crushing and dismantling, with high purity.
2, key technology is connecting the equipments that specially used in the crushing and dismantling of all kinds of waste circuit boards, could have better energy-saving and high metal recycling rate in the production.
3, the equipment have good comprehensive performance, and have unique effect on electrical components, computer boards, tv boards and other circuit boards.
4, this technology is upgrading products with the circuit boards recycling equipment, could separate the circuit boards with electrical components , with low consume, no noise, high automation program, high efficiency and need smaller area, for now the technology is the best equipment to recycle waste circuit boards.
Electrical components dismantling equipment
Three-roll electric separator
Characteristics of automatic three-roller internal-circulated electric separator:as it belongs to multi-roller equipment, materials are sorted through three rollers from the top down, and after extraction recovery rate can reach 99.8%. The efficiency of this model is three or four times higher than that of single-roller electric separator with automatic operation.And it can save two or three times labors and electric charges.This equipment has many advantages such as automatic control, better sorting effects, high security, large treatment capacity, high soring purities, reliable operating as well as convenient operation .The automatic cleaning and dust-absorption pneumatic system prevent dust pollutions.
Three-roll electric separator
Electrolytic aluminum waste sorting
Electrolytic aluminum anode waste mainly contains: carbon material, cryolite, alumina, iron and other trace impurities. The recycling production line of electrolytic aluminum anode scrap can extract cryolite and carbon block with purity of 99 percent, and also extract iron and iron oxide, make each material apply to corresponding industrial, realizing the recycle economy reuse and the "3 without" mode:without environment pollution, without harm, without waste .It adopts physical method and chemical method to extract and refine respectively for various materials form anode waste.Realizing the resource recycling, the equipment has the features with automatic operation, high efficiency, low labor intensity, low energy consumption, small covers, low noise, etc. A full set of equipment’s operation is automatic controlled by plc, only need to three to four people.All water is recycling, greatly saving the cost of recycling. Patent no.:201110297236.2
The product line’s main equipments are: feed bin, conveyor, vibration sieve, dust collecting equipment, composite cylinder.Winnowing screen, color separator, magnetic separation conveyor and multi-layer vibration sieve, bunker, electric separator, crusher, feeding machine, milling machine, collecting machine, vibration sieve, flotation machine, dryer, water pump, reaction kettle, washing machine, dewatering machine, mixer, extruding machine.
Electrolytic aluminum waste sorting
Electronic waste disposal equipment , electrical and electronic waste recycling equipment, electronic waste recycling
Electronic waste, also known as e-waste, refers disused electronic equipment
A wide range of e-waste can be divided into two categories, one is contained in the species is relatively simple, less harmful to the environment of waste electronic products, such as refrigerators, washing machines, air conditioners and other household appliances as well as medical, research and other electrical appliances dismantling and disposal of such products is relatively simple, the other is contained in the material is more complex, relatively large damage to the environment of waste electronic products, such as computers, tv picture tubes in the lead, computer components contain arsenic, mercury and other harmful substances, the phone's raw material of arsenic, cadmium, lead and many other durable drop and bioaccumulative toxic substances.
E-waste recycling equipment is mainly used for various electrical appliances, electronic equipment, including refrigerators, air conditioners, washing machines, television sets and other household appliances and electronic products, computer communications, the process from feeding to sorting end, full automatic operation, only 1-2 man operation, the process is physically separated dry without heating, burning, drink chemical raw materials, low cost, high efficiency, no pollution of any separate dry at room temperature, this technique for my company registered patent, numbers are: 200820148816.9 200820148815.4 and 200810141173.X.
Promises: the company sells electronic waste disposal equipment have perfect service, one year warranty and lifetime maintenance, completely solve your worries, please rest assured purchase!
Electronic waste disposal equipment , electrical and electronic waste recycling equipment, electronic waste recycling
Wire and cable separation and recycling equipment
The technology is mainly used for various waste copper electric wire communication cable, aluminum wire, electrical and electronic waste miscellaneous line, automobile and motorcycle miscellaneous line, copper-plastic compounds and so on.The materials are separated and recycled by the following process:loading, crushing, storage, feeding, decomposition, collector, vibrating screen, loading machine, specific gravity separation, electric separation and a series of process.The purity of plastic can be up to 99.7%, the recovery rate of copper can be reach 99.8%. The technology is physical dry separation without any chemical raw materials and water, and has no environment pollution. This process can also be used for aluminum-plastic board, aluminum-plastic pipe, medicine sheet, filter screen and so on. This process has won four national patents, patent number: 201110286092.0, 200810141172.5, 200910249968.7 and 200920276651.8.
Wire and cable separation and recycling equipment
Waste household appliance recycling equipment, waste electrical appliance recycling equipment, waste refrigerator recycling equipment, waste refrigerator washing machine recycling equipment, waste hardware motor vehicle crush material recycling equipment, waste car crush material separation equipment, waste motorcycle crush material recycling equipment, waste bycicle recycling equipment.
This technology process flow through car grabbing, conveying, alligator pressure feeding, fist crushing, suction wind separating, magnetic separating, second crushing, suction wind separating, magnetic separating, vibrating sieve feeding, non-ferrous metal separating, air table etc, separating all kinds of the waste appliance into copper, aluminum, iron, steel, plastic, glass, film through crushing recycling equipment, .The full equipment could crush and separate material without manual dismantling, separating purification could reach above 98%.Automatically operating, 150t/day capacity, only need 4-5 people to operate.
Waste household appliance recycling equipment, waste electrical appliance recycling equipment, waste refrigerator recycling equipment, waste refrigerator washing machine recycling equipment, waste hardware motor vehicle crush material recycling equipment, waste car crush material separation equipment, waste motorcycle crush material recycling equipment, waste bycicle recycling equipment.
Waste electrical appliance recycling equipment/household appliance recycling equipment
This machine is a waste old electrical appliances recycle equipment with harmless treatment and resource recycling.Such as refrigerators, washing machines, air conditioning and so on, firstly, it need to make the waste refrigerators, air conditioning and other appliances which contain refrigerant smoke fluoride with pretreatment, tear down compressor and motor.Then the above materials will pass though the primary coarse broken, secondary crushing, winnowing, foam charge, dust collecting, magnetic separation and eddy current separation and electric separation processes to separate iron, copper, aluminum, plastic, foam insulation membrane of the waste household appliances with automatic demolition production line, and the recovery rate can reach more than 99%.This production line has modified on the basis of foreign experience with high industrial automation, high treatment efficiency, low operate cost, no producing secondary pollution etc., thus filling up the gaps of domestic waste electric processing equipment, achieving the international advanced level.
Waste electrical appliance recycling equipment/household appliance recycling equipment
Magnetic separator
Main use of the machine:
The machine is mainly used to remove the magnetic material for which contain less water.When the materials pass through the magnetic field, the magnetic and non-magnetic come into different trajectories by magnetic force, mechanical force and gravity force, realizing the separation.It is suitable for all kinds of plastic, living garbage, smelting slag, crops, food, waste household appliances, metallurgy, cement, rubber, mineral, steel, coal, refractories and other industries about the separation of magnetic materials.
Main structure features:
The roller adopts permanent magnetic core, with the surface made up of stainless steel net, it can enlarge the scope of separation, and the roller is not easy to heat, without water and chemical raw materials, no secondary pollution, energy saving, safe and reliable, high purity separation, large volume, convenient operation, easy maintenance etc.
Magnetic separator/dry magnetic separator
Head material crusher/head material grinder/sheet material crusher/plate material grinder /bulk material crusher/strong crusher
This equipment adopts the straight feeding inlet, thickening body with unique design and solid with blade design , welding into the shape takes knife shaft as a whole, resistant to shock, rotating blades with the insert installation, high strength alloy steel, solid and durable. The machine is suitable for crushing the head material, large material, plastic material, large plastic material, thick wall tube, storage thick plate, the original billet as well as other relatively hard material.
Head material crusher/head material grinder/sheet material crusher/plate material grinder /bulk material crusher/strong crusher
Plastic mill/non-ferrous metal mill
Working principle:
The material and air flow are rotating with the high speed rotation when the equipment is running.The materials are crushed by the strong air pressure, strong shear force and fierce impact with each other on the grinding block composed of turbine rotor and abrasive bricks of the sieve circle.It is on the basis of the airflow and the machine, and turn into the products such as uniform particle, small particle size distribution range.
The performance and feature
The machine has many advantages, including low energy consumption, high efficiency, long life, easy maintenance and change parts and so on. Especially for the powder separation of the combination or compound of metal and nonmetal.It can make all kinds of metal into a round ball, this is good use for electrostatic and separation.The patent of this machine is zl200820148816.9.
Applicable scope
This machine is widely used to all kinds of materials under the medium hardness , such as the plastic (polyethylene, polyester, polypropylene, polyvinyl chloride, polyethylene, polypropylene, nylon, pom, etc.), rubber, chemical dyes (salt, pigment, gesso, paint, kaolin, etc.), pesticide, medicine, food, feed, non-ferrous metals (copper, aluminum, iron, magnesium, etc.) or nonmetallic minerals (such as asbestos, glass, clay, etc.) and so on .
Plastic mill/non-ferrous metal mill
Mineral separation equipment/preparation equipment
Characteristics of silicon purification electric separator:based on of the advantages of other models, the internal structure and in-out feeding system is improved by using the heating plate to feed and adding heating systems in the bin and the roller .This equipment can separate plastics, fibers, silica from the waste sundry according to semi-conductivity and thermal conductivity of the crystalline silicon.The purity can reach more than 99%.The type of equipment is applicable to separate and purify various conductor materials of silicon chip, silicon particles, cooper particles, aluminum particles and carbons which contains small amount of non-conductor materials.And electricitycanand front-rear system, using heating plate vibration feeding, and bunker and roller heating system. , crystalline silicon in waste , and other , purity. This kind of electrical machine is mainly suitable for monocrystalline silicon and polycrystalline silicon, silicon, copper, aluminum, carbon and other separation and purification of conductor material contains a small amount of nonconductive material.
This machine use physical dry separation, don't need any chemical raw materials, water and won't produce any pollution of the environment, truly a harmless, non-polluting environmental purification science. And equipment with plc automatic control, only 1 person operation. The technology for my company's patent, patent number: 200920258609.3.
Mineral separation equipment/preparation equipment
Waste wind separating machine, waste wind separating equipment
Waste wind separating machine is suitable for the living garbage winnowing, lighter material from each allotted to select in the garbage.
Company commitment: the company has sales of waste wind particulary if the machine has a perfect after-sales service, one year warranty, life-long maintenance, thoroughly solve your trouble back at home, please rest assured purchase!
Waste wind separating machine, waste wind separating equipment
Electric separator/electrostatic separator/ high-voltage separator
The series of jf electric separation equipment is according to the electrical difference of the material (conductivity, dielectric constant, thermoelectricity, rectifier, electric conductivity, ) the materials are separated and sorted by the electrostatic force, electrostatic force, gravity and centrifugal force in high voltage electric field.The complete machine may be with one roller, two rollers, three rollers, six rollers and multiple rollers.According to the difference and sorting requirements of different mixed materials.Hence, finish of separation or selecting, we can manufacture the electric equipment of different models and different types.Efficiency may be improved by simplified operations.Different materials have different requirements on the feeding system, material-charging system and material-loading system.The internal structure of electric separator is also different.
Electric separator/electrostatic separator/ high-voltage separator
Eddy current separator/non-ferrous metal separator
Eddy current separator makes use of induced current generated by conductor in the high frequency alternating magnetic field. During operation, there is high frequency alternating magnetic field in the surface of the in the surface of separation magnetic rollers.When non-ferrous metals pass through the magnetic field , eddy current will be appeared in the non-ferrous metal, it will produce the magnetic field opposite to the origin, non-ferrous metal (such as copper, aluminum, etc.) leap forward along the transport direction, because of the the repulsion of the magnetic field. Realizing the separation with other nonconductive materials or other separation of or nonmetal materials.
Characteristics:
1?it’s convenient to install and use with high separation efficiency
2?adopting the high strength permanent magnet as the source of magnetic with steady and long be sustainable
3?without electricity, energy saving.
4?structure is reasonable and reliable, easy to maintenance.
5?repulsive force is strong and can be adjusted with strong adaptability
6?it has large range of separating particle size, is suitable for the non-magnetic and non-ferrous metals , whose granularity is more than 1.5mm.
Application scope:
It is mainly used for household waste, industrial waste, industrial waste slag, electronic appliances waste, glass broken materials, boiler ashes, scrap car slice, such as copper, aluminum, tin, lead, stainless steel and other kinds of weak magnetic conductor materials, non-magnetic conductor materials, non-ferrous metals and other materials in the industry of non-ferrous metals processing.
Eddy current separator/non-ferrous metal separator
Rubber-plastic crusher/ladder-type crusher
The main features of this machine are: direct feeding in the entrance, the rotor and blade adapter is distributed like ladder in a whole welding , and the blade adapters are welding in shape with each other.This equipment can be good used in breaking larger material with uniform crushing power , impact resistance, strong crushing , easy feeding, it is suitable for tons of package material, thicker hollow, thicker basin, automobile tires, plastic tub, etc. The materials can be directly input and broken without be flatten.
Rubber-plastic crusher/ladder-type crusher
Metal mill/aluminum powder mill/non-ferrous metal mill
Working principle:
The material and air flow are rotating with the high speed rotation when the equipment is running.The materials are crushed by the strong air eddy current, strong shear force and fierce impact with each other on the grinding block composed of turbine rotor blades and u tooth plate in the machine, discharged outside the machine by the rear sieve mesh after crushing.
Performance characteristics:
The machine has the advantages with high efficiency, long life, low noise, good cooling, wide application range, easy maintenance and change parts, bearing chamber of the machine has water-cooling system , it can prolong the service life of bearing. It’s better for metal and nonmetal combination to mill and disintegrate , it can make all kinds of metal into a round ball, this is good use for electrostatic and separation. The machine patent number is zl200820148816.9
Application scope:
This machine is applied to all kinds of materials which are under the medium such as plastic(pet, pvc, polyethylene, polypropylene, nylon, etc.), chemical dyes (salt, pigment, gesso, paint, kaolin, etc.), pesticide, medicine, food, feed, non-ferrous metals (copper, aluminum, iron, magnesium, etc.) or nonmetallic minerals (such as asbestos, glass, clay, etc.)
Metal mill/aluminum powder mill/non-ferrous metal mill
High voltage electrostatic separator
Characteristics of single-roll electric separator: wide use range, simple structure, convenient adjustment, high purity, convenient maintenance, dry operation, without water and any pollution of the environment.It is mainly used for separation and purification of the conductor, also suitable for the selection of material separation, or the materials of higher requirements for separation purification.Our company develops roller drum electric separator with low power consumption, the cost is even lower than one-tenth of the similar foreign equipment.
High voltage electrostatic separator
Metal separation equipment
Full set metal separation equipment includes the following processes: primary coarse crushing, secondary grind breaking, magnetic separation, screening, window separation hydraulic gravity separation, electric separation and a series of processes, when passing through the above processes, it can separate iron, copper, aluminum from impurities with each other, and the different metals, purity can reach more than 98%. The equipment is plc fully automatic control, only need to one or two people , using physical dry separation without burning , chemical raw materials and environmental pollution, small covers, low energy consumption, high purity, high production, easy maintenance, etc. It is mainly used in the recycling -reusing industry such as waste automobiles, waste radiator, waste the motor stator, waste electrical appliances and waste industrial equipments.
Company commitment: the company has sales of metal separation equipment has a perfect after-sales service, one year warranty, life-long maintenance, thoroughly solve your trouble back at home, please rest assured purchase!
Metal separation equipment
Household waste burning metal separation equipment, waste burning dry method separation equipment, waste burning equipment, waste burning separation equipment, metal waste burning equipment.
This technology process flow through conveyor equipment, large drum screen, magnetic separator, wind separator, gravity separator, non ferrous metal separator, air table, dust removal, air purification etc, adopts dry method instead of water method to separate metal.Automatically operating, 800t/day capacity, only need 3-4 people, without any water and chemical method.Mainly used for household waste burning metal separation.
Household waste burning metal separation equipment, waste burning dry method separation equipment, waste burning equipment, waste burning separation equipment, metal waste burning equipment.
Household waste processing equipment, household waste metal seaprating equipment, waste separating equipment
Household waste processing equipment process flow through truck, conveyor, double roller package tearing machine, shaftless screening roller, magnetic vortex separator, wind separator, dust collect, gas process etc.Separate copper aluminum with non ferrous metal, iron with magnetic material, plastic rubber, stainless steel, heavy sand, organic compound with debris, big clothes that in the raw material.Separating rate could reach about 98%.Automatic operating through feeding to separating, 300-500t/day capacity, only need 3-5 people.New technology, without fire, water and chemical method.Mainly used to separate city household waste and industry waste.
Company commitment: the company has sales of household waste processing equipment has the perfect after-sales service, one year warranty, life-long maintenance, thoroughly solve your trouble back at home, please rest assured purchase!
Household waste processing equipment, household waste metal seaprating equipment, waste separating equipment
Winnowing machine
Wind separation, also called air classifiers based on air separation medium, under the effect of air flow, is a solid waste particles size sorting according to the density of goods a method.
Air separation equipment according to the direction of the air blown into the sorting equipment, air separation equipment can be divided into horizontal wind separator, updraft winnowing machine line and s negative pressure air separator.
Company commitment: the company has sales of winnowing machine has a perfect after-sales service, one year warranty, life-long maintenance, thoroughly solve your trouble back at home, please rest assured purchase!
Winnowing machine
Leather sorting equipment/leather scrap sorting equipment
Leather sorting equipment is through the conveyor, crusher, friction separator, air separation, dust removal and a series of process, the leather after crushing, the leather material with gauze sorting. A full set of assembly line for automation, only 1 or 2 people can operation, sorting around 99% purity, using physical method of separation, without water and chemicals, material recycling, air after dust discharging standard, without any pollution. Mainly used for automatic recycling scrap leather, leather leftover material materials.
Company commitment: the company has sales of leather sorting device has a perfect after-sale service, one year warranty, life-long maintenance, thoroughly solve your trouble back at home, please rest assured purchase!
Leather sorting equipment/leather scrap sorting equipment
Medicine plate separation and recycling
Medicine plate separation and recycling (pharmaceutical packaging separation and recycling) is mainly used for separating various of medicine sheet (medical packaging, bottle, aluminum-plastic packaging, medicine leftover material), can also be applied to all kinds of metal and nonmetal composites such as aluminum-plastic plate, car decoration, cable skin, plastic extruder filter, leather, ornaments, cable car extruder filter and so on.The aluminum-plastic composites are separated by crushing, feeding, milling decomposition, screening, dust collecting, vibration, air pressure, feeding back, electric separation and other series of processes. Metal recovery rate can reach 99.8%, purity of plastic is more than 99.7%. It adopts physical method , namely , dry method separation , which doesn’t involve the heating, fire, water and other chemical raw materials, therefore no pollution will be produced. It has the features with low cost, high efficiency, small space.Full set of assembly line uses plc control, only need to 1-2 person.This process has received four national patents.Patent no. 200810141172.5, 200810141174.4, 200820148814 .4xand 200910249968.7 .
Company commitment: the company has sales of medicine plate separation and process has a perfect after-sales service, one year warranty, life-long maintenance, thoroughly solve your trouble back at home, please rest assured purchase!
Medicine plate separation and recycling
Cd automatic recycling sorting equipment
Automated collection sorting equipment are suitable for all kinds of cd cd separation recycling. The assembly line by the crusher, wind machine, bleaching machine, reaction kettle stirring pot, friction washer, chamfer of winnowing device can put the disc in the packaging plastic film and paper for air separation, such as pp, poly acrylic, pc separation recycling. Full set of production line adopts automatic control, operation, and only takes 2-3 people to use water recycling, air after dealing with the dust discharging standard, no water, air and noise pollution.
Company commitment: the company has sales of cd automatic sorting equipment has perfect after-sales service, one year warranty, life-long maintenance, thoroughly solve your trouble back at home, please rest assured purchase!
Cd automatic recycling sorting equipment
Panel pulverizer / aluminum-plastic crusher / three-ply board crusher
This machine has double rotors which are lengthened, and blade adapter is largened.The blades are distributed uniformly in every rotor, each two rotors are rotating relatively, blades are staggered with each other in vertical.The size of feeding entrance is more than 190cm, used for all kinds of large shape plank or blob(such as the whole piece of aluminum-plastic plate, decorate gusset plate, aluminum-plastic blob, plastic blob, foam packing materials, three-ply board, insulation board, wood board, etc.)the diameter of blob materials is less than 190cm, the width of plate id less than 185cm, the stacking thickness of non-metallic plate is less than 15mm.
Panel pulverizer / aluminum-plastic crusher / three-ply board crusher
Circuit board to take off the tin electronics equipment
With electronic components of the circuit board by conveyor to close the wind into the feeding roller and feed preheating chamber.
The device containing waste gas exports the back-end and exhaust gas treatment device, again for exhaust gas purification, discharging standard. Tin rate can reach about 99% off the equipment, electronic components rate can reach about 95%. Through this device can take electronic components of the circuit board is divided into: solder, electronic components, electronic components and circuit board larger.
Circuit board to take off the tin electronics equipment
Carbon extraction from pulverized fuel ash / pulverized fuel ash sorting
As there is carbon in fly ash, which is not only waste the energy, but also seriously affect the quality of fly ash. If the content of carbon in fly ash is more than 8 percent, it will affect the quality control of the cement or concrete, for the superior fly ash, the maximum content should be less than 4 percent. The carbon maximum in the fly ash is 8percent according to the gb standards in our country.This process refines the carbon from fly ash on the basis of thermoelectricity and electrical conductivity of the carbon by feeding, scattering, drying, vibrating, dust collecting, magnetic separation, electric separation and a series of processes.
This electric separator has improved the internal structure and equipped with heating system on the basis of the advantages of other electric separator, to achieve better effect on fly ash separation.Carbon content of fly ash will be under 7 percent. The process achieve the automatic production, there is dust collecting equipment in every link to reduce the dust pollution.The technology is our company’s patent, patent number: 201110286037.1, 201110286091.6, 200920258609.3, 201110288262.9.
Company commitment: the company has sales of pulverized arg, ash sorting has perfect after-sales service, one year warranty, life-long maintenance, thoroughly solve your trouble back at home, please rest assured purchase!
Carbon extraction from pulverized fuel ash / pulverized fuel ash sorting
Scrap car plastic separation equipment
Scrap car article plastic separation equipment by conveyor, hanging magnetic separator, level of biaxial shredding machine, the secondary decomposition of high speed machine, guan wind machine, fan, bag filter, aggregate, high frequency vibrating screen, conveyor sorting machine, winding machine, electric machine and other equipment, automotive plastic pieces of plastic and aluminum completely separate, material recycling rates by more than 99.99%, separating plastic around 99.99% purity, quite a few times in the aluminium purity of about 99%, a full set of equipment for automatic control, without fire, water and chemical raw materials, the waste gas discharging standard, through processing is the national advocate environmental protection projects in recycling, replace the original manual, fire, water table or landfill pollution methods, such as the new technological process, the whole production line shall not exceed 65 db noise.
Company commitment: the company has sales of scrap car article plastic separation equipment has a perfect after-sales service, one year warranty, life-long maintenance, thoroughly solve your trouble back at home, please rest assured purchase!
Scrap car plastic separation equipment
Construction waste separating equipment
This technology process flow through truck, conveyor, alligator crush, second double roller crush, feed screening machine, magnetic separating, wind separating, eddy current separator, dust collect, separating the masonry cement block, waste clothes, plastic, wood, aluminum, wire, iron, magnetic material, plastic film and light weight material that in the construction waste.Automatically operating, 1000t/day capacity, only need 5-8 people.Separating purification could reach about 98%.Mainly used for separating construction waste.
Construction waste separating equipment
