Characteristic and Application:
1.Gel-free cable core, using dry water-blocking material to provide good water
resistance performance
2.Convenient for installation, reduce cable preparation and installation time
3.Speed fiber access and cleanup
4.Reduce the number of tools required
5.Metallic, non-metallic armored or unarmored
6.Duct, directly bury or aerial installation
Description
In the gyxtw cable, single-mode/multimode fibers are positioned in the loose tube, which is made of high modulus plastic materials and filled with filling compound. Psp is longitudinally applied around the loose tube, and water-blocking materials are distributed into interstices between them to guarantee the compactness and longitudinal water-blocking performance. Two parallel steel wires are placed at both sides of the cable core while pe sheath is extruded over it.
Application : aerial/ duct
Temperature rage:
Storing temperature:-40? to +70?
Operating temperature:-40? to +70?
Characteristics:
?excellent mechanical and temperature performance
Guaranteed by the accurate excess fiber length.
?critical protection to fibers, based on the excellent
Hydrolysis resistance and strength performance of tube material
And special filling compound filled in the tube.
?special compact structure to avoid the loose tube shrinkage.
?excellent crush resistance and flexibility.
?psp enhances the cable crush-resistance, impact-resistance
And moisture-proof.
?two parallel steel wires ensure tensile strength.
Small diameter, light weight and installation friendliness with
Long delivery length.
? excellent ultraviolet prevention with pe sheath.
? small diameter, light weight and installation friendliness
Standards
Comply with standard yd/t 769-2010
Technical parameters
Cable type (increased by 2fibers) Fiber count Cable diameter mm Cable weight kg/km Tensile strength long/short term n Crush resistance long/short term n/100mm Bending radius static/dynamic mm
Gyxtw 2 ~12 2 ~ 12 8.2 78 600/1500 300/1000 10d/20d
Note:
1. Cables can be supplied with a range of single mode or multimode fibers.
2. The dimensions and raw materials can be designed according to the demand of the customers.
3. Standard reel length: 3000m/reel: other lengths available on request.
All dielectric self-supporting aerial installation cable-ADSS
Double Layer Aerial ADSS Cable is used for communication cable of overhead high-voltage electricity transmission system,it also can be used as communication cable at the areas where lighting is frequent or distance is big.
Characteristic:
1.Two jacket and stranded loose tube design,stable performance and compatibility with all common fiber types.
2.Instead of aramid yarn or glass yarn,there is no support or messenger wire required,aramid yarn is used as the strength member to assure the tensile and strain performance.
3.Mainly installed at existing 220KV or lower voltage power lines.
Description:
The PBT Loose Tube Optical Ground Wire (OPGW) is surrounded by single or double layers of aluminum clad steel wires(ACS) or mix ACS wires and aluminum alloy wires. Good anti-corrosion performance.Material and structure are uniform, good resistance to vibration fatigue.
Application:
The Aluminum tube is surrounded by single or double layers of aluminum clad steel wires(ACS) or mix ACS wires and aluminum alloy wires.Good anti-corrosion performance.Material and structure are uniform, good resistance to vibration fatigue
Characteristic:
1. Good anti-corrosion performance.
2. Material and structure are uniform, good resistance to vibration fatigue.
3. Short circuit current has small effect on the optical fiber transmission properties.
4. Good anti-lightning performance.
contact us:
www.gl-fibercable.com
Email:sales@gl-fibercable.com
Product description of simplex tactical fiber optic cable for broadcast television communication
In the gyts cable, single-mode/multimode fibers are positioned in the loose tubes, while the loose tubes strand together around the strength member into a compact and circular cable core.The strength member would be covered with polyethylene (pe).The water-blocking materials are distributed into the interstices of the cable core.Then the cable is completed with a pe sheath.
?product features of simplex tactical fiber optic cable for broadcast television communication
1.Excellent mechanical and temperature performance.Critical protection to fibers.
2.Excellent ultraviolet prevention with pe sheath.
3.Excellent crush resistance and flexibility.
4.The following measures are taken to ensure the water blocking performance of the cable:
- single steel wire strength member used as the central strength member
- special water-blocking filling compound in the loose tube
- 100% cable core filling
Product Description
1) Gel filled mulit loose tube provide good protection for the coating fiber
2 Steel wire/FRP as central tension strength
3) Good ultra violet radiation resistant
4) Double sheath and conrrugated steel tape armored..Good moisture-resistance.
5) Single mode G652D fiber type .
APPLICATION
1) Adopted to Outdoor Direct buried,Aerial, Duct installation
2) Access network and local network in high electromagnetic interfering places.
Information OF 12CORE GYTA53 FIBER CALBE
No. of Tube 2Looses tube+4Filler tube
No. of fiber/Tube 6Fibers
No. of fiber 12 Fibers
Approx. Cable Diameter 13.4~19.6mm
Loose Tube Material PBT
Filling compound (Tube) Thixotropic Jelly
Strength Member Steel Wire or FRP
Water Blocking Water Swell able Material
Corrugated Steel Tape Nom. 0.25mm Thick.
Outer Sheath Nom. 2.7mm Thick. Black MDPE
Mechanical & Environmental Performance
Tensile Strength Long Term: 1000N, Short Term: 3000N
Crush Resistance Long Term: 1000N, Short Term: 3000N
Bending Radius Long Term: 10D, Short Term:20D
Storage Temperature -20~+60°C
Optical Fiber Performance
Fiber Type G.652D,125.0±1.0µm
Mode Field Diameter 9.2 ± 0.2µm at 1310 nm
Cladding Diameter 125 ± 1µm
Cladding Non-Circularity: = 1%
Coating Diameter 245 ± 10µm
Attenuation Coefficient = 0.36dB/km at 1310nm, = 0.22dB/km at 1550nm
Chromatic Dispersion =3.5ps/nm/km at 1285~1330nm, =18ps/nm/km at 1550nm
Zero Dispersion Wavelength 1300~1322nm
PMD Coefficient = 0.2ps/vkm
Description:
The Stranded Optical Ground Wire (OPGW) is stranded by double or three layers of aluminum clad steel wires(ACS) or mix ACS wires and aluminum alloy wires.
Characteristic:
1.High quality standards for designing, testing and producing with grade A materials available to ensure long-term reliability .
2 Engineering support supervising and providing its own line of accessories hardware
3.larger tensile strength and fault current capacity to reach a better balance of electrical and mechanical performance.
Description:
The Aluminum tube is surrounded by single or double layers of aluminum clad steel wires(ACS) or mix ACS wires and aluminum alloy wires. Good anti-corrosion performance.Material and structure are uniform, good resistance to vibration fatigue.
Description:
1.The Simplex fiber optic cable uses single 900µm tight buffered Tube structure as fiber optic transmission medium, covered with aramid yarn as strength member, then extruded with thermoplastic polyurethane sheath.
2.The Polyurethane jacket with a Excellent performance of anti-torsion and anti wear. It can be used and rolled up then used again elsewhere. Even with the rugged environments.
3.GL Tactical fiber optic cable tight buffered tube cable is used for outdoor video, traffic control etc telecommunication.Also application for the military mobile.
Application :
1. Military communication system
2. Coal, oil, natural gas, geological exploration
3. Broadcast television, temporary communication
Temperature Range:
Operating :-20â?? to 60â??
Storage :-20â?? to 60â??
Characteristic:
1. Flexibility ,easy to storage and operation.
2. Stainless steel armored protection for fiber.
3. Polyurethane sheath provide Wear resistant, oil resistant, low temperature flexibility
4. Aramid yarn strength with stable tension .
5. High tensile and high pressure to prevent rat bite, cutting, bending.
6. Cable soft, good toughness, installation, maintenance convenient.
specifications:
1.Can be installed with SC,FC pigtail.
2.Small in size and easy in opration.
3.This terminal box is made of high quality plastic,
4.Applicable to single core terminal protection.
5.Used for consistency between outdoor cable and exchange cabinet pigtails.
6.Installation method: wall-mounted or rack-mounted.
7.Light weight, small size, easy installation,provide splice, connection, protection of fiber cable and pigtail.
Features:
1.IP-65 Protection level
2.Integrated with splice cassette and cable management tools
3.Manage large quantities of fiber with a high packing density
4.Easy to maintain and extend the capacity
5.Fiber bend radius control more than 40mm
6.Suitable for the fusion splice or mechanical splice or fast connector
7.Capacity of fiber up to 288 core
8.Varies of adaptors are available
9.1*8 or 1*16 PLC Spliter can be installed as an option
10.Efficient cable management
Application:
1.FTTH, FTTB, FTTC
2.Telecommunication Network
3.Local Area Network
4.CATV
Product Description:
fiber optic box is designed for configuration flexibility, these closures offer expanded slack storage, various tray heights and mass platform storage.The Guanglian fiber optic box include hermetically sealed and free-breathing solutions. The hermetically sealed closures include Light Linker, and fiber dome closures; they can be used for any outside plant
application.
Features of fiber optic box :
1)The scope of application is: aerial, underground, wall-mounting, duct-mounting and handhole- mounting.
2)The ambient temperature ranges from â??40°Cto +65°C.
Description
The central stainless steel tube is surrounded by single or double layers of aluminum clad steel wires(ACS) or mix ACS wires and aluminum alloy wires. are the most widely used cables ,their design is fully adapted to the most common electric line needs.
Characteristic:
1. High quality standards for designing, testing and producing with grade A materials available to ensure long-term reliability .
2. Engineering support supervising and providing its own line of accessories hardware .
3.Seal stainless steel tube superior protection to the fiber optical to moisture and extreme environmental conditions such as lightening
4. To construct OPGW must cut power, resulting in greater loss, thus OPGW must be used in constructing high pressure line over 110kv;
5. Apply to the transformation of old lines.
Standards:
ITU-TG.652 Characteristics of a single mode optical fiber
ITU-TG.655 Characteristics of a non-zero dispersion -shifted single mode fibers optical
EIA/TIA598 B Col code of fiber optic cables
IEC 60794-4-10 Aerial optical cables along electrical power lines-family specification for OPGW
IEC 60794-1-2 Optical fiber cables -part test procedures
IEEE Standard for testing and performance for optical ground wire for use on electric utility power lines
IEC 61232 Aluminum -Clad steel wire for electrical purposes
IEC60104 Aluminum magnesium silicon alloy wire for overhead line conductors
IEC 61089 Round wire concentric lay overhead electrical stranded conductors .
Typical design for Single Layer:
Specification Fiber Count Diameter
(mm) Weight (kg/km) RTS(KN) Short Circuit (KA2s)
OPGW-32(40.6;4.7) 12 7.8 243 40.6 4.7
OPGW-42(54.0;8.4) 24 9 313 54 8.4
OPGW-42(43.5;10.6) 24 9 284 43.5 10.6
OPGW-54(55.9;17.5) 36 10.2 394 67.8 13.9
OPGW-61(73.7;175) 48 10.8 438 73.7 17.5
OPGW-61(55.1;24.5) 48 10.8 358 55.1 24.5
OPGW-68(80.8;21.7) 54 11.4 485 80.8 21.7
OPGW-75(54.5;41.7) 60 12 459 63 36.3
OPGW-76(54.5;41.7) 60 12 385 54.5 41.7
Note:
1. Only a part of OPGW cables are listed in the table. Cables with other specifications can be inquired.
2. Cables can be supplied with a range of single mode or multimode fibers.
3. Specially designed Cable structure is available on request.
Typical design for Double Layer:
Specification Fiber Count Diameter(mm) Weight (kg/km) RTS(KN) Short Circuit (KA2s)
OPGW-96[121.7;42.2] 12 13 671 121.7 42.2
OPGW-127[141.0;87.9] 24 15 825 141 87.9
OPGW-127[77.8;128.0] 24 15 547 77.8 128
OPGW-145(121.0;132.2) 28 16 857 121 132.2
OPGW-163(138.2;183.6) 36 17 910 138.2 186.3
OPGW-163(99.9;213.7) 36 17 694 99.9 213.7
OPGW-183(109.7;268.7) 48 18 775 109.7 268.7
OPGW-183(118.4;261.6) 48 18 895 118.4 261.6
Note:
1. Only a part of OPGW cables are listed in the table. Cables with other specifications can be inquired.
2. Cables can be supplied with a range of single mode or multimode fibers.
3. Specially designed Cable structure is available on request.
Description:
The Central Tube Optical Ground Wire (OPGW) is surrounded by single or double layers of aluminum clad steel wires(ACS) or mix ACS wires and aluminum alloy wires. are the most widely used cables ,their design is fully adapted to the most common electric line needs.
Characteristic:
1. High quality standards for designing, testing and producing with grade A materials available to ensure long-term reliability .
2. Engineering support supervising and providing its own line of accessories hardware .
3.Seal stainless steel tube superior protection to the fiber optical to moisture and extreme environmental conditions such as lightening
4. To construct OPGW must cut power, resulting in greater loss, thus OPGW must be used in constructing high pressure line over 110kv;
5. Apply to the transformation of old lines.
Characteristic and Application:
1.Easy to distinguish with color stripes along cable jacket
2.Provide one or more stripes
3.Provide color customized according to requirement
4.Color stripe with ultraviolet resistant
5.Metallic, non-metallic armored or unarmored
6.Duct, directly bury or aerial installation
contact us know more information:
Website: http://www.gl-fibercable.com
E-mail: sales@gl-fibercable.com
Description:
Gl mini span adss fiber optic cable is idea for installation in distribution as well as transmission environments, even when live -line installations are required as its name indicates, there is no support or messenger wire required, so installation is achieved in a single pass.
Application: self-support aerial installation
Characteristic:
1.Suitable for use on distribution and high
Voltage transmission lines with mini spans or
Self supporting installation for
Telecommunication .
2. Track -resistant outer jacket available for
The high voltage line where space potentials
Up to 35kv.
3. Gel-filled buffer tubes are s-z stranded
4. Instead of aramid yarn or glass yarn, there is no
Support or messenger wire required. Aramid yarn
Is used as the strength member to assure the tensile
And strain performance
5. For mini span (100-200) the fiber counts
From 4-24 fibers
Typical technical parameter:
Span (meter) Weight(kg/km) Diameter(mm) Initial tension (n)
Unload load
12fibers
50 110 12.2 892 1479
100 110 12.2 1338 2043
150 110 12.2 2232 3286
200 110 12.2 3280 4800
24fibers
50 115 12.2 904 1486
150 115 12.2 2261 3304
200 115 12.2 3322 4826
Note:
1. Only a part of adss cables are listed in the table. More can be produce as required .
2. Cables can be supplied with a range of single mode or multimode fibers.
3. Specially designed cable structure is available on request.
Description:
The simplex cable uses single 900µm tight buffered fiber as fiber optic transmission medium, covered with aramid yarn as strength member, then extruded with thermoplastic polyurethane sheath.
Application :
1. Military communication system
2. Coal, oil, natural gas, geological
Exploration
3.Broadcast television, temporary
Communication
Temperature range:
Operating :-20? to 60?
Storage :-20? to 60?
Characteristic:
1. Flexibility , easy to storage and operation
2. Polyurethane sheath provide wear resistant, oil resistant, low temperature flexibility
3. Aramid yarn strength with stable tension .
4. High tensile and high pressure to prevent rat bite, cutting, bending.
5. Cable soft, good toughness, installation, maintenance convenient.
Standards
Comply with standard yd/t1258.2-2003 and iec 60794-2-10/11
Technical specification
Fiber counts Cable diameter (mm) Weight (kg/km) Tensile strength(n) Crush resistance(n/100mm) Minimum bending radius (mm)
Short-term Long-term Short-term Long-term Static Dynamic
2~4 5 10 600 400 200 300 60 30
6~7 5.2 11.5 600 400 200 300 60 30
10~12 6 12.8 600 400 200 300 60 30
Note:
1. Only a part of cables are listed in the table. Cables with other specifications can be inquired.
2. Cables can be supplied with a range of single mode or multimode fibers.
3. Specially designed cable structure is available on request.
Description:
The simplex fiber optic cable uses single 900µm tight buffered tube structure as fiber optic transmission medium, covered with aramid yarn as strength member, then extruded with thermoplastic polyurethane sheath.
Application :
1. Military communication system
2. Coal, oil, natural gas, geological exploration
3. Broadcast television, temporary communication
Temperature range:
Operating :-20? to 60?
Storage :-20? to 60?
Characteristic:
1.Flexibility , easy to storage and operation.
2.Stainless steel armored protection for fiber.
3. Polyurethane sheath provide wear resistant, oil resistant, low temperature flexibility
4. Aramid yarn strength with stable tension .
5. High tensile and high pressure to prevent rat bite, cutting, bending.
6. Cable soft, good toughness, installation, maintenance convenient.
Standards:
Comply with standard yd/t1258.3-2003 and iec 60794-2-10/11
Technical specification
Fiber countsCable diameter (mm)Weight (kg/km)Tensile strength(n)Crush resistanceMinimum bending radius (mm)
Short-termLong-termShort-termLong-termStaticDynamic
2~451214002200400030006030
6~8713.5140022004000300060 30
10~1291514002200400030006030
Note:
1. Only a part of cables are listed in the table. Cables with other specifications can be inquired.
2.Cables can be supplied with a range of single mode or multimode fibers.
3. Specially designed cable structure is available on request.
Description
In the gyta cable, single-mode/multimode fibers are positioned in the loose tubes, the tubes are filled with water blocking filling compound.Tubes and fillers are stranded around the strength member into a circular cable core. An apl/psp is applied around the core. Which is filled with the filling compound to protect it. Then the cable is completed with a pe sheath.
Application: duct/aerial
Temperature range:
Storing temperature:-40? to +70?
Operating temperature:-40? to +70?
Characteristics
?excellent mechanical and temperature
Performance guaranteed by the accurate excess fiber length
?critical protection to fibers
?the following measures are taken to ensure the
Water blocking performance of the cable.
- single steel wire used as the central strength member
- special water-blocking filling compound in the loose tube.
- 100% cable core filling
Standards
Comply with standard yd/t 901-2009 as well as iec 60794-1
Technical parameters
Cable type (increased by 2fibers)Fiber countTubes+fillersCable diameter mmCable weight kg/kmTensile strength long/short term nCrush resistance long/short term n/100mmBending radius static/dynamic mm
Gyta /s2 ~ 302 ~ 3059.580600/1500300/100010d/20d
Gyta/s 32 ~ 3632 ~ 3669.797600/1500300/100010d/20d
Gyta/s 38 ~6038 ~60510.5109600/1500300/100010d/20d
Gyta /s62 ~7262 ~72611.5126600/1500300/100010d/20d
Gyta /s74 ~96 74 ~96813.2153600/1500300/100010d/20d
Gyta /s98 ~12098 ~1201014.6182600/2000300/100010d/20d
Gyta /s122 ~ 144 122 ~ 1441216.5221600/2500300/100010d/20d
Gyta/s 146 ~ 216146 ~ 2881816.5221600/2500300/100010d/20d
Note:
1.Cables can be supplied with a range of single mode or multimode fibers.
2. The dimensions and raw materials can be designed according to the demand of the customers.
3. Standard reel length: 3000m/reel: other lengths available on request.
Description
In the gyta53 cable, single-mode/multimode fibers are positioned in the loose tubes, the tubes are filled with water blocking filling compound.Tubes and fillers are stranded around the strength member into a circular cable core. An aluminum polyethylene laminate(apl) is applied around the core. Which is filled with the filling compound to protect it. Then the cable is completed with a thin pe sheath. After psp is applied over the inner sheath, the cable is completed with a pe outer sheath.
Application: direct buried
Temperature range:
Storing temperature:-40? to +70?
Operating temperature:-40? to +70?
Characteristics
?excellent mechanical and temperature.
?critical protection to fibers.
?the following measures are taken to ensure the
Water blocking performance of the cable:
- single steel wire used as the central strength member
- special water-blocking filling compound in the loose tube
- 100% cable core filling
- apl and psp moisture barrier
Standards
Comply with stand yd/t 901-2009 as well as iec 60794-1
Technical parameters
Cable type (increased by 2fibers)Fiber countTubes +fillersCable diameter mmCable weight kg/kmTensile strength long/short term nCrush resistance long/short term n/100mmBending radius static/dynamic mm
Gyta53 2 ~ 362 ~ 36613.71901000/30001000/300010d/20d
Gyta53 38 ~ 7238 ~ 72615.32291000/30001000/300010d/20d
Gyta53 74~9674~96815.92441000/30001000/300010d/20d
Gyta53 98 ~12098 ~1201018.02881000/30001000/300010d/20d
Gyta53 122 ~144122 ~1441219.23251000/30001000/300010d/20d
Gyta53 146~288146~2881820.93731000/30001000/300010d/20d
Note:
1.Cables can be supplied with a range of single mode or multimode fibers.
2. The dimensions and raw materials can be designed according to the demand of the customers.
3. Standard reel length: 3000m/reel: other lengths available on request.
Description
In the gytc8s/gytc8a cable, single-mode/multimode fibers are positioned in the loose tubes, while the loose tubes strand together around metallic central strength member into a compact and circular cable core, and the water-blocking materials are distributed into interstices of it. After a psp/apl is applied around the cable core, this part of cable accompanied with the stranded wires as the supporting part are completed with a pe sheath to be a figure-8 structure.
Application: self supporting aerial
Temperature range
Storing temperature:-40? to +70?
Operating temperature:-40? to +70?
Characteristics
?excellent mechanical and temperature performance
?critical protection to fibers,
?the following measures are taken to ensure the
Water blocking performance of the cable:
- single steel wire used as the central strength member
- special water-blocking filling compound in the loose tube
- 100% cable core filling
Standards
Comply with stand yd/t 901-2009 as well as iec 60794-1
Technical parameters
Cable type (increased by 2 fibers)Fiber countCable diameter mmCable weight kg/kmTensile strength long/short term nCrush resistance long/short term n/100mm
Gytc8s/a 2 ~ 302 ~ 309.5 x 19.1160.02000/6000300/ 1000
Gytc8s/a 32 ~ 3632 ~ 3610.1 x 19.7170.0 2000/6000300/ 1000
Gytc8s/a 38 ~ 6038 ~ 6010.8 x 20.4180.0 2000/6000300/ 1000
Gytc8s/a 62 ~ 7262 ~ 7212.4 x 22.0195.0 2000/6000300/ 1000
Gytc8s/a 74 ~ 9674 ~ 9613.1 x 22.7222.0 2000/6000300/ 1000
Gytc8s/a 98~ 12098~ 12015.7 x 22.3238.0 2000/6000300/ 1000
Gytc8s/a 122~ 144122~ 14415.5 x 25.1273.02000/6000300/ 1000
Note:
1.Cables can be supplied with a range of single mode or multimode fibers.
2. The dimensions and raw materials can be designed according to the demand of the customers.
3. Standard reel length: 3000m/reel: other lengths available on request.
Website: www.gl-fibercable.com
E-mail: sales@gl-fibercable.com
Characteristic and Application:
1.Gel-free cable core, using dry water-blocking material to provide good water
resistance performance
2.Convenient for installation, reduce cable preparation and installation time
3.Speed fiber access and cleanup
4.Reduce the number of tools required
5.Metallic, non-metallic armored or unarmored
6.Duct, directly bury or aerial installation
Characteristic and Application:
1.Easy to distinguish with color stripes along cable jacket
2.Provide one or more stripes
3.Provide color customized according to requirement
4.Color stripe with ultraviolet resistant
5.Metallic, non-metallic armored or unarmored
6.Duct, directly bury or aerial installation
Description:
The Stranded Optical Ground Wire (OPGW) is stranded by double or three layers of aluminum clad steel wires(ACS) or mix ACS wires and aluminum alloy wires.
Characteristic:
1.High quality standards for designing, testing and producing with grade A materials available to ensure long-term reliability .
2 Engineering support supervising and providing its own line of accessories hardware .
3.larger tensile strength and fault current capacity to reach a better balance of electrical and mechanical performance.
