Flow: 7m3/h
Head: 15m
Power: 0.75kw
Material: cast iron
Speed: 2850r/min
Voltage: 380V
Phase: 3 phase/50Hz
Color: yellow
Product overview:
The series submersible sewage pump is mainly used for industry,agricultural,fishery,mine drainage,building construction, municipal environmental protection and tunnel construction etc. Trades to drain off soild particles with short fiber, confetti,sediment and so on. Or drain off software solids liquids. Such as mud,grey water, life wastewater, sewage and so on. The series submersible pump is the ideal equipment for agricultural irrigation,raising livestock and poultry manure pit,cleaning the silt of pool and construction site.
Usage:
Used for discharging waste water and other material with granular material, also it can be used for clean water and corrosive medium.
Conditions of using:
1.The medium temperature should not be over 40oC ,PH:4-10.
2.The solid volume ratio of the medium should not be over 2%.
3.The kinematic viscosity of medium between 7*10-7m2/s---23*10-6 m2/s.
4.The density of the medium is 1.2*10 3kg/m3.
5.Centered on the impeller,underwater not more than 5m.
Scope of application:
1. For discharging polluted waste water of factories and industries;
2. sewage discharge station of living quarters;
3. drainage system of municipal sewage treatment plant
4. drainage station of fire fighting system
5. waterworks equipment of running water factory
6. sewage discharge of hospitals and hotels
7. construction site of municipal engineering
8. matched equipment of exploration mine
9. country biogas digester
10.farm irrigation
11. other industries
Flow: 7m3/h
Head: 18m
Power: 1.1kw
Material: cast iron
Outlet dia: 40mm
Speed: 2900r/min
Voltage: 380V
Phase: 3 phase/50Hz
Color: Yellow
Product overview:
The series submersible sewage pump is mainly used for industry,agricultural,fishery,mine drainage,building construction, municipal environmental protection and tunnel construction etc. Trades to drain off soild particles with short fiber, confetti,sediment and so on. Or drain off software solids liquids. Such as mud,grey water, life wastewater, sewage and so on. The series submersible pump is the ideal equipment for agricultural irrigation,raising livestock and poultry manure pit,cleaning the silt of pool and construction site.
Usage:
Used for discharging waste water and other material with granular material, also it can be used for clean water and corrosive medium.
Conditions of using:
1.The medium temperature should not be over 40oC ,PH:4-10.
2.The solid volume ratio of the medium should not be over 2%.
3.The kinematic viscosity of medium between 7*10-7m2/s---23*10-6 m2/s.
4.The density of the medium is 1.2*10 3kg/m3.
5.Centered on the impeller,underwater not more than 5m.
Scope of application:
1. For discharging polluted waste water of factories and industries;
2. sewage discharge station of living quarters;
3. drainage system of municipal sewage treatment plant
4. drainage station of fire fighting system
5. waterworks equipment of running water factory
6. sewage discharge of hospitals and hotels
7. construction site of municipal engineering
8. matched equipment of exploration mine
9. country biogas digester
10.farm irrigation
11. other industries
Flow: 15m3/h
Head: 7m
Power: 0.75kw
Material: cast iron
Outlet dia: 65mm
Speed: 2900r/min
Voltage: 380V
Phase: 3 phase/50Hz
Color: Yellow
Product overview:
The series submersible sewage pump is mainly used for industry,agricultural,fishery,mine drainage,building construction, municipal environmental protection and tunnel construction etc. Trades to drain off soild particles with short fiber, confetti,sediment and so on. Or drain off software solids liquids. Such as mud,grey water, life wastewater, sewage and so on. The series submersible pump is the ideal equipment for agricultural irrigation,raising livestock and poultry manure pit,cleaning the silt of pool and construction site.
Usage:
Used for discharging waste water and other material with granular material, also it can be used for clean water and corrosive medium.
Conditions of using:
1.The medium temperature should not be over 40oC ,PH:4-10.
2.The solid volume ratio of the medium should not be over 2%.
3.The kinematic viscosity of medium between 7*10-7m2/s---23*10-6 m2/s.
4.The density of the medium is 1.2*10 3kg/m3.
5.Centered on the impeller,underwater not more than 5m.
Scope of application:
1. For discharging polluted waste water of factories and industries;
2. sewage discharge station of living quarters;
3. drainage system of municipal sewage treatment plant
4. drainage station of fire fighting system
5. waterworks equipment of running water factory
6. sewage discharge of hospitals and hotels
7. construction site of municipal engineering
8. matched equipment of exploration mine
9. country biogas digester
10.farm irrigation
11. other industries
Qj submersible pumps parameters:
Flow range10~500m3/h, lift scope within 5~405m;
Caliber scope 32~203mm, temperature range-15~80° c.
Products overview:
Qj series submersible pumps widely used in farmland irrigation, spray irrigation and water-use, industrial and civil buildings, also the drainage system to level hills, mountain diversion and in low-lying areas dunes, urban and rural mining supply, drainage and other water conservancy facilities. Characteristics are that they are assembled into a simple structure they have installation convenience a small footprint, simple maintenance and a safe reliable operation.
Product use conditions:
Qj submersible pumps use conditions
1. 380 v bias voltage does not exceed + -5% and 50 hz frequency, and the deviation is not more than + -1% of the three-phase power supply.
2. Electrical cavity must be filled with water.
3. The first-class pump impeller should at least go into the dynamic water level 2 m below surface. Static pump unit immersed under water shall not be greater than 70 m.
4. Electrical from the bottom of the bottom of the well shall be not less than 3 m.
5. The water temperature no higher than 20 ° c, qjr-temperature hot water pump up to 80 ° c.
6. Water and sand content (by mass) of not more than 0.01%.
7. Water ph 6.5-8.5.
8. The hydrogen sulfide in water content is not more than 1.5 mg / l.
Application :
Deep well water
Farm irrigation
Sprinkling irrigation
Urban and rural industry
Qj submersible pumps parameters:
Flow range10~500m3/h, lift scope within 5~405m;
Caliber scope 32~203mm, temperature range-15~80° c.
Products overview:
Qj series submersible pumps widely used in farmland irrigation, spray irrigation and water-use, industrial and civil buildings, also the drainage system to level hills, mountain diversion and in low-lying areas dunes, urban and rural mining supply, drainage and other water conservancy facilities. Characteristics are that they are assembled into a simple structure they have installation convenience a small footprint, simple maintenance and a safe reliable operation.
Product use conditions:
Qj submersible pumps use conditions
1. 380 v bias voltage does not exceed + -5% and 50 hz frequency, and the deviation is not more than + -1% of the three-phase power supply.
2. Electrical cavity must be filled with water.
3. The first-class pump impeller should at least go into the dynamic water level 2 m below surface. Static pump unit immersed under water shall not be greater than 70 m.
4. Electrical from the bottom of the bottom of the well shall be not less than 3 m.
5. The water temperature no higher than 20 ° c, qjr-temperature hot water pump up to 80 ° c.
6. Water and sand content (by mass) of not more than 0.01%.
7. Water ph 6.5-8.5.
8. The hydrogen sulfide in water content is not more than 1.5 mg / l.
Flow: 10m3/h
Head: 40m
Power: 2.2kw
Material: cast iron
Medium: clean water
Outlet dia: 32mm
Diameter: 175mm
Speed: 2850r/min
Voltage: 380v
Phase: 3 phase/50hz
Color: blue
Qj submersible pumps parameters:
Flow range10~500m3/h, lift scope within 5~405m;
Caliber scope 32~203mm, temperature range-15~80° c.
Products overview:
Qj series submersible pumps widely used in farmland irrigation, spray irrigation and water-use, industrial and civil buildings, also the drainage system to level hills, mountain diversion and in low-lying areas dunes, urban and rural mining supply, drainage and other water conservancy facilities. Characteristics are that they are assembled into a simple structure they have installation convenience a small footprint, simple maintenance and a safe reliable operation.
Product use conditions:
Qj submersible pumps use conditions
1. 380 v bias voltage does not exceed + -5% and 50 hz frequency, and the deviation is not more than + -1% of the three-phase power supply.
2. Electrical cavity must be filled with water.
3. The first-class pump impeller should at least go into the dynamic water level 2 m below surface. Static pump unit immersed under water shall not be greater than 70 m.
4. Electrical from the bottom of the bottom of the well shall be not less than 3 m.
5. The water temperature no higher than 20 ° c, qjr-temperature hot water pump up to 80 ° c.
6. Water and sand content (by mass) of not more than 0.01%.
7. Water ph 6.5-8.5.
8. The hydrogen sulfide in water content is not more than 1.5 mg / l.
Application :
Deep well water
Farm irrigation
Sprinkling irrigation
Urban and rural industry
Mine supply and drainage.
Flow: 10m3/h
Head: 65m
Power: 4kw
Material: cast iron
Medium: clean water
Outlet dia: 32mm
Diameter: 175mm
Speed: 2850r/min
Voltage: 380v
Phase: 3 phase/50hz
Color: blue
Qj submersible pumps parameters:
Flow range10~500m3/h, lift scope within 5~405m;
Caliber scope 32~203mm, temperature range-15~80° c.
Products overview:
Qj series submersible pumps widely used in farmland irrigation, spray irrigation and water-use, industrial and civil buildings, also the drainage system to level hills, mountain diversion and in low-lying areas dunes, urban and rural mining supply, drainage and other water conservancy facilities. Characteristics are that they are assembled into a simple structure they have installation convenience a small footprint, simple maintenance and a safe reliable operation.
Product use conditions:
Qj submersible pumps use conditions
1. 380 v bias voltage does not exceed + -5% and 50 hz frequency, and the deviation is not more than + -1% of the three-phase power supply.
2. Electrical cavity must be filled with water.
3. The first-class pump impeller should at least go into the dynamic water level 2 m below surface. Static pump unit immersed under water shall not be greater than 70 m.
4. Electrical from the bottom of the bottom of the well shall be not less than 3 m.
5. The water temperature no higher than 20 ° c, qjr-temperature hot water pump up to 80 ° c.
6. Water and sand content (by mass) of not more than 0.01%.
7. Water ph 6.5-8.5.
8. The hydrogen sulfide in water content is not more than 1.5 mg / l.
Application :
Deep well water
Farm irrigation
Sprinkling irrigation
Urban and rural industry
Mine supply and drainage.
Flow: 10m3/h
Head: 95m
Power: 5.5kw
Material: cast iron
Medium: clean water
Outlet dia: 32mm
Diameter: 175mm
Speed: 2850r/min
Voltage: 380v
Phase: 3 phase/50hz
Color: blue
Qj submersible pumps parameters:
Flow range10~500m3/h, lift scope within 5~405m;
Caliber scope 32~203mm, temperature range-15~80° c.
Products overview:
Qj series submersible pumps widely used in farmland irrigation, spray irrigation and water-use, industrial and civil buildings, also the drainage system to level hills, mountain diversion and in low-lying areas dunes, urban and rural mining supply, drainage and other water conservancy facilities. Characteristics are that they are assembled into a simple structure they have installation convenience a small footprint, simple maintenance and a safe reliable operation.
Product use conditions:
Qj submersible pumps use conditions
1. 380 v bias voltage does not exceed + -5% and 50 hz frequency, and the deviation is not more than + -1% of the three-phase power supply.
2. Electrical cavity must be filled with water.
3. The first-class pump impeller should at least go into the dynamic water level 2 m below surface. Static pump unit immersed under water shall not be greater than 70 m.
4. Electrical from the bottom of the bottom of the well shall be not less than 3 m.
5. The water temperature no higher than 20 ° c, qjr-temperature hot water pump up to 80 ° c.
6. Water and sand content (by mass) of not more than 0.01%.
7. Water ph 6.5-8.5.
8. The hydrogen sulfide in water content is not more than 1.5 mg / l.
Application :
Deep well water
Farm irrigation
Sprinkling irrigation
Urban and rural industry
Mine supply and drainage.
Flow: 10m3/h
Head: 108m
Power: 5.5kw
Material: cast iron
Medium: clean water
Outlet dia: 32mm
Diameter: 175mm
Speed: 2850r/min
Voltage: 380V
Phase: 3 phase/50Hz
Color: Blue
QJ Submersible pumps Parameters:
Flow range10~500m3/h, Lift scope within 5~405m;
Caliber scope 32~203mm, Temperature range-15~80° C.
Products Overview:
QJ Series submersible pumps widely used in farmland irrigation, spray irrigation and water-use, industrial and civil buildings, also the drainage system to level hills, mountain diversion and in low-lying areas dunes, urban and rural mining supply, drainage and other water conservancy facilities. Characteristics are that they are assembled into a simple structure they have installation convenience a small footprint, simple maintenance and a safe reliable operation.
Product use conditions:
QJ Submersible pumps use conditions
1. 380 V bias voltage does not exceed + -5% and 50 HZ frequency, and the deviation is not more than + -1% of the three-phase power supply.
2. Electrical cavity must be filled with water.
3. The first-class pump impeller should at least go into the dynamic water level 2 m below surface. Static pump unit immersed under water shall not be greater than 70 m.
4. Electrical from the bottom of the bottom of the well shall be not less than 3 m.
5. The water temperature no higher than 20 ° C, QJR-temperature hot water pump up to 80 ° C.
6. Water and sand content (by mass) of not more than 0.01%.
7. Water PH 6.5-8.5.
8. The hydrogen sulfide in water content is not more than 1.5 mg / L.
Application :
deep well water
farm irrigation
sprinkling irrigation
urban and rural industry
mine supply and drainage.
Flow: 10m3/h
Head: 21m
Power: 7.5kw
Material: cast iron
Medium: clean water
Outlet dia: 32mm
Diameter: 175mm
Speed: 2850r/min
Voltage: 380V
Phase: 3 phase/50Hz
Color: Blue
QJ Submersible pumps Parameters:
Flow range10~500m3/h, Lift scope within 5~405m;
Caliber scope 32~203mm, Temperature range-15~80° C.
Products Overview:
QJ Series submersible pumps widely used in farmland irrigation, spray irrigation and water-use, industrial and civil buildings, also the drainage system to level hills, mountain diversion and in low-lying areas dunes, urban and rural mining supply, drainage and other water conservancy facilities. Characteristics are that they are assembled into a simple structure they have installation convenience a small footprint, simple maintenance and a safe reliable operation.
Product use conditions:
QJ Submersible pumps use conditions
1. 380 V bias voltage does not exceed + -5% and 50 HZ frequency, and the deviation is not more than + -1% of the three-phase power supply.
2. Electrical cavity must be filled with water.
3. The first-class pump impeller should at least go into the dynamic water level 2 m below surface. Static pump unit immersed under water shall not be greater than 70 m.
4. Electrical from the bottom of the bottom of the well shall be not less than 3 m.
5. The water temperature no higher than 20 ° C, QJR-temperature hot water pump up to 80 ° C.
6. Water and sand content (by mass) of not more than 0.01%.
7. Water PH 6.5-8.5.
8. The hydrogen sulfide in water content is not more than 1.5 mg / L.
Application :
deep well water
farm irrigation
sprinkling irrigation
urban and rural industry
mine supply and drainage.
Flow: 10m3/h
Head: 135m
Power: 9.2kw
Material: cast iron
Medium: clean water
Outlet dia: 32mm
Diameter: 175mm
Speed: 2850r/min
Voltage: 380V
Phase: 3 phase/50Hz
Color: Blue
QJ Submersible pumps Parameters:
Flow range10~500m3/h, Lift scope within 5~405m;
Caliber scope 32~203mm, Temperature range-15~80° C.
Products Overview:
QJ Series submersible pumps widely used in farmland irrigation, spray irrigation and water-use, industrial and civil buildings, also the drainage system to level hills, mountain diversion and in low-lying areas dunes, urban and rural mining supply, drainage and other water conservancy facilities. Characteristics are that they are assembled into a simple structure they have installation convenience a small footprint, simple maintenance and a safe reliable operation.
Product use conditions:
QJ Submersible pumps use conditions
1. 380 V bias voltage does not exceed + -5% and 50 HZ frequency, and the deviation is not more than + -1% of the three-phase power supply.
2. Electrical cavity must be filled with water.
3. The first-class pump impeller should at least go into the dynamic water level 2 m below surface. Static pump unit immersed under water shall not be greater than 70 m.
4. Electrical from the bottom of the bottom of the well shall be not less than 3 m.
5. The water temperature no higher than 20 ° C, QJR-temperature hot water pump up to 80 ° C.
6. Water and sand content (by mass) of not more than 0.01%.
7. Water PH 6.5-8.5.
8. The hydrogen sulfide in water content is not more than 1.5 mg / L.
Application :
deep well water
farm irrigation
sprinkling irrigation
urban and rural industry
mine supply and drainage.
Flow: 10m3/h
Head: 150m
Power: 9.2kw
Material: cast iron
Medium: clean water
Outlet dia: 32mm
Diameter: 175mm
Speed: 2850r/min
Voltage: 380V
Phase: 3 phase/50Hz
Color: Blue
QJ Submersible pumps Parameters:
Flow range10~500m3/h, Lift scope within 5~405m;
Caliber scope 32~203mm, Temperature range-15~80° C.
Products Overview:
QJ Series submersible pumps widely used in farmland irrigation, spray irrigation and water-use, industrial and civil buildings, also the drainage system to level hills, mountain diversion and in low-lying areas dunes, urban and rural mining supply, drainage and other water conservancy facilities. Characteristics are that they are assembled into a simple structure they have installation convenience a small footprint, simple maintenance and a safe reliable operation.
Product use conditions:
QJ Submersible pumps use conditions
1. 380 V bias voltage does not exceed + -5% and 50 HZ frequency, and the deviation is not more than + -1% of the three-phase power supply.
2. Electrical cavity must be filled with water.
3. The first-class pump impeller should at least go into the dynamic water level 2 m below surface. Static pump unit immersed under water shall not be greater than 70 m.
4. Electrical from the bottom of the bottom of the well shall be not less than 3 m.
5. The water temperature no higher than 20 ° C, QJR-temperature hot water pump up to 80 ° C.
6. Water and sand content (by mass) of not more than 0.01%.
7. Water PH 6.5-8.5.
8. The hydrogen sulfide in water content is not more than 1.5 mg / L.
Application :
deep well water
farm irrigation
sprinkling irrigation
urban and rural industry
mine supply and drainage.
Shenlong pump Ltd is located at the beautiful shore of the Yellow River and at the foot of the mountains of Mangshan, ZhengZhou City in the heart of Henan province.
The company was created in the 1980s, And after the company's combined relentless efforts has become one of the largest modern enterprises in Henan that combines Research and Development (R&D), Prototype Design, Product testing, Advanced industrial production, and operational excellence.
Shenlong pump Ltd is a design manufacture export professional company. Our Enterprise is Ministry of Agriculture. We are production and sales pumps around the world. The manufacture have strong technical force, with all kinds of machine tools, planer, drill press, etc. and The manufacture's total land area of over 660000 Square meters and with in excess of 300 equipment sets. Employing 860 staff members; amongst them over 40 senior technical experts. The allocation of B-level exceeds the national standard of computer Pump testing centers.
Flow: 10m3/h
Head: 165m
Power: 11kw
Material: cast iron
Medium: clean water
Outlet dia: 32mm
Diameter: 175mm
Speed: 2850r/min
Voltage: 380V
Phase: 3 phase/50Hz
Color: Blue
QJ Submersible pumps Parameters:
Flow range10~500m3/h, Lift scope within 5~405m;
Caliber scope 32~203mm, Temperature range-15~80° C.
Products Overview:
QJ Series submersible pumps widely used in farmland irrigation, spray irrigation and water-use, industrial and civil buildings, also the drainage system to level hills, mountain diversion and in low-lying areas dunes, urban and rural mining supply, drainage and other water conservancy facilities. Characteristics are that they are assembled into a simple structure they have installation convenience a small footprint, simple maintenance and a safe reliable operation.
Product use conditions:
QJ Submersible pumps use conditions
1. 380 V bias voltage does not exceed + -5% and 50 HZ frequency, and the deviation is not more than + -1% of the three-phase power supply.
2. Electrical cavity must be filled with water.
3. The first-class pump impeller should at least go into the dynamic water level 2 m below surface. Static pump unit immersed under water shall not be greater than 70 m.
4. Electrical from the bottom of the bottom of the well shall be not less than 3 m.
5. The water temperature no higher than 20 ° C, QJR-temperature hot water pump up to 80 ° C.
6. Water and sand content (by mass) of not more than 0.01%.
7. Water PH 6.5-8.5.
8. The hydrogen sulfide in water content is not more than 1.5 mg / L.
Application :
deep well water
farm irrigation
sprinkling irrigation
urban and rural industry
mine supply and drainage.
Shenlong pump Ltd is located at the beautiful shore of the Yellow River and at the foot of the mountains of Mangshan, ZhengZhou City in the heart of Henan province.
The company was created in the 1980s, And after the company's combined relentless efforts has become one of the largest modern enterprises in Henan that combines Research and Development (R&D), Prototype Design, Product testing, Advanced industrial production, and operational excellence.
Shenlong pump Ltd is a design manufacture export professional company. Our Enterprise is Ministry of Agriculture. We are production and sales pumps around the world. The manufacture have strong technical force, with all kinds of machine tools, planer, drill press, etc. and The manufacture's total land area of over 660000 Square meters and with in excess of 300 equipment sets. Employing 860 staff members; amongst them over 40 senior technical experts. The allocation of B-level exceeds the national standard of computer Pump testing centers.
Flow: 10m3/h
Head: 180m
Power: 13kw
Material: cast iron
Medium: clean water
Outlet dia: 32mm
Diameter: 175mm
Speed: 2850r/min
Voltage: 380V
Phase: 3 phase/50Hz
Color: Blue
QJ Submersible pumps Parameters:
Flow range10~500m3/h, Lift scope within 5~405m;
Caliber scope 32~203mm, Temperature range-15~80° C.
Products Overview:
QJ Series submersible pumps widely used in farmland irrigation, spray irrigation and water-use, industrial and civil buildings, also the drainage system to level hills, mountain diversion and in low-lying areas dunes, urban and rural mining supply, drainage and other water conservancy facilities. Characteristics are that they are assembled into a simple structure they have installation convenience a small footprint, simple maintenance and a safe reliable operation.
Product use conditions:
QJ Submersible pumps use conditions
1. 380 V bias voltage does not exceed + -5% and 50 HZ frequency, and the deviation is not more than + -1% of the three-phase power supply.
2. Electrical cavity must be filled with water.
3. The first-class pump impeller should at least go into the dynamic water level 2 m below surface. Static pump unit immersed under water shall not be greater than 70 m.
4. Electrical from the bottom of the bottom of the well shall be not less than 3 m.
5. The water temperature no higher than 20 ° C, QJR-temperature hot water pump up to 80 ° C.
6. Water and sand content (by mass) of not more than 0.01%.
7. Water PH 6.5-8.5.
8. The hydrogen sulfide in water content is not more than 1.5 mg / L.
Application :
deep well water
farm irrigation
sprinkling irrigation
urban and rural industry
mine supply and drainage.
Shenlong pump Ltd is located at the beautiful shore of the Yellow River and at the foot of the mountains of Mangshan, ZhengZhou City in the heart of Henan province.
The company was created in the 1980s, And after the company's combined relentless efforts has become one of the largest modern enterprises in Henan that combines Research and Development (R&D), Prototype Design, Product testing, Advanced industrial production, and operational excellence.
Shenlong pump Ltd is a design manufacture export professional company. Our Enterprise is Ministry of Agriculture. We are production and sales pumps around the world. The manufacture have strong technical force, with all kinds of machine tools, planer, drill press, etc. and The manufacture's total land area of over 660000 Square meters and with in excess of 300 equipment sets. Employing 860 staff members; amongst them over 40 senior technical experts. The allocation of B-level exceeds the national standard of computer Pump testing centers.
Flow: 10m3/h
Head: 195m
Power: 13kw
Material: cast iron
Medium: clean water
Outlet dia: 32mm
Diameter: 175mm
Speed: 2850r/min
Voltage: 380V
Phase: 3 phase/50Hz
Color: Blue
QJ Submersible pumps Parameters:
Flow range10~500m3/h, Lift scope within 5~405m;
Caliber scope 32~203mm, Temperature range-15~80° C.
Products Overview:
QJ Series submersible pumps widely used in farmland irrigation, spray irrigation and water-use, industrial and civil buildings, also the drainage system to level hills, mountain diversion and in low-lying areas dunes, urban and rural mining supply, drainage and other water conservancy facilities. Characteristics are that they are assembled into a simple structure they have installation convenience a small footprint, simple maintenance and a safe reliable operation.
Product use conditions:
QJ Submersible pumps use conditions
1. 380 V bias voltage does not exceed + -5% and 50 HZ frequency, and the deviation is not more than + -1% of the three-phase power supply.
2. Electrical cavity must be filled with water.
3. The first-class pump impeller should at least go into the dynamic water level 2 m below surface. Static pump unit immersed under water shall not be greater than 70 m.
4. Electrical from the bottom of the bottom of the well shall be not less than 3 m.
5. The water temperature no higher than 20 ° C, QJR-temperature hot water pump up to 80 ° C.
6. Water and sand content (by mass) of not more than 0.01%.
7. Water PH 6.5-8.5.
8. The hydrogen sulfide in water content is not more than 1.5 mg / L.
Application :
deep well water
farm irrigation
sprinkling irrigation
urban and rural industry
mine supply and drainage.
Shenlong pump Ltd is located at the beautiful shore of the Yellow River and at the foot of the mountains of Mangshan, ZhengZhou City in the heart of Henan province.
The company was created in the 1980s, And after the company's combined relentless efforts has become one of the largest modern enterprises in Henan that combines Research and Development (R&D), Prototype Design, Product testing, Advanced industrial production, and operational excellence.
Shenlong pump Ltd is a design manufacture export professional company. Our Enterprise is Ministry of Agriculture. We are production and sales pumps around the world. The manufacture have strong technical force, with all kinds of machine tools, planer, drill press, etc. and The manufacture's total land area of over 660000 Square meters and with in excess of 300 equipment sets. Employing 860 staff members; amongst them over 40 senior technical experts. The allocation of B-level exceeds the national standard of computer Pump testing centers.
Flow: 10m3/h
Head: 210m
Power: 13kw
Material: cast iron
Medium: clean water
Outlet dia: 32mm
Diameter: 175mm
Speed: 2850r/min
Voltage: 380V
Phase: 3 phase/50Hz
Color: Blue
QJ Submersible pumps Parameters:
Flow range10~500m3/h, Lift scope within 5~405m;
Caliber scope 32~203mm, Temperature range-15~80° C.
Products Overview:
QJ Series submersible pumps widely used in farmland irrigation, spray irrigation and water-use, industrial and civil buildings, also the drainage system to level hills, mountain diversion and in low-lying areas dunes, urban and rural mining supply, drainage and other water conservancy facilities. Characteristics are that they are assembled into a simple structure they have installation convenience a small footprint, simple maintenance and a safe reliable operation.
Product use conditions:
QJ Submersible pumps use conditions
1. 380 V bias voltage does not exceed + -5% and 50 HZ frequency, and the deviation is not more than + -1% of the three-phase power supply.
2. Electrical cavity must be filled with water.
3. The first-class pump impeller should at least go into the dynamic water level 2 m below surface. Static pump unit immersed under water shall not be greater than 70 m.
4. Electrical from the bottom of the bottom of the well shall be not less than 3 m.
5. The water temperature no higher than 20 ° C, QJR-temperature hot water pump up to 80 ° C.
6. Water and sand content (by mass) of not more than 0.01%.
7. Water PH 6.5-8.5.
8. The hydrogen sulfide in water content is not more than 1.5 mg / L.
Application :
deep well water
farm irrigation
sprinkling irrigation
urban and rural industry
mine supply and drainage.
Shenlong pump Ltd is located at the beautiful shore of the Yellow River and at the foot of the mountains of Mangshan, ZhengZhou City in the heart of Henan province.
The company was created in the 1980s, And after the company's combined relentless efforts has become one of the largest modern enterprises in Henan that combines Research and Development (R&D), Prototype Design, Product testing, Advanced industrial production, and operational excellence.
Shenlong pump Ltd is a design manufacture export professional company. Our Enterprise is Ministry of Agriculture. We are production and sales pumps around the world. The manufacture have strong technical force, with all kinds of machine tools, planer, drill press, etc. and The manufacture's total land area of over 660000 Square meters and with in excess of 300 equipment sets. Employing 860 staff members; amongst them over 40 senior technical experts. The allocation of B-level exceeds the national standard of computer Pump testing centers.
Flow: 10m3/h
Head: 225m
Power: 13kw
Material: cast iron
Medium: clean water
Outlet dia: 32mm
Diameter: 175mm
Speed: 2850r/min
Voltage: 380V
Phase: 3 phase/50Hz
Color: Blue
QJ Submersible pumps Parameters:
Flow range10~500m3/h, Lift scope within 5~405m;
Caliber scope 32~203mm, Temperature range-15~80° C.
Products Overview:
QJ Series submersible pumps widely used in farmland irrigation, spray irrigation and water-use, industrial and civil buildings, also the drainage system to level hills, mountain diversion and in low-lying areas dunes, urban and rural mining supply, drainage and other water conservancy facilities. Characteristics are that they are assembled into a simple structure they have installation convenience a small footprint, simple maintenance and a safe reliable operation.
Product use conditions:
QJ Submersible pumps use conditions
1. 380 V bias voltage does not exceed + -5% and 50 HZ frequency, and the deviation is not more than + -1% of the three-phase power supply.
2. Electrical cavity must be filled with water.
3. The first-class pump impeller should at least go into the dynamic water level 2 m below surface. Static pump unit immersed under water shall not be greater than 70 m.
4. Electrical from the bottom of the bottom of the well shall be not less than 3 m.
5. The water temperature no higher than 20 ° C, QJR-temperature hot water pump up to 80 ° C.
6. Water and sand content (by mass) of not more than 0.01%.
7. Water PH 6.5-8.5.
8. The hydrogen sulfide in water content is not more than 1.5 mg / L.
Application :
deep well water
farm irrigation
sprinkling irrigation
urban and rural industry
mine supply and drainage.
Shenlong pump Ltd is located at the beautiful shore of the Yellow River and at the foot of the mountains of Mangshan, ZhengZhou City in the heart of Henan province.
The company was created in the 1980s, And after the company's combined relentless efforts has become one of the largest modern enterprises in Henan that combines Research and Development (R&D), Prototype Design, Product testing, Advanced industrial production, and operational excellence.
Shenlong pump Ltd is a design manufacture export professional company. Our Enterprise is Ministry of Agriculture. We are production and sales pumps around the world. The manufacture have strong technical force, with all kinds of machine tools, planer, drill press, etc. and The manufacture's total land area of over 660000 Square meters and with in excess of 300 equipment sets. Employing 860 staff members; amongst them over 40 senior technical experts. The allocation of B-level exceeds the national standard of computer Pump testing centers.
Flow: 10m3/h
Head: 240m
Power: 15kw
Material: cast iron
Medium: clean water
Outlet dia: 32mm
Diameter: 175mm
Speed: 2850r/min
Voltage: 380V
Phase: 3 phase/50Hz
Color: Blue
QJ Submersible pumps Parameters:
Flow range10~500m3/h, Lift scope within 5~405m;
Caliber scope 32~203mm, Temperature range-15~80° C.
Products Overview:
QJ Series submersible pumps widely used in farmland irrigation, spray irrigation and water-use, industrial and civil buildings, also the drainage system to level hills, mountain diversion and in low-lying areas dunes, urban and rural mining supply, drainage and other water conservancy facilities. Characteristics are that they are assembled into a simple structure they have installation convenience a small footprint, simple maintenance and a safe reliable operation.
Product use conditions:
QJ Submersible pumps use conditions
1. 380 V bias voltage does not exceed + -5% and 50 HZ frequency, and the deviation is not more than + -1% of the three-phase power supply.
2. Electrical cavity must be filled with water.
3. The first-class pump impeller should at least go into the dynamic water level 2 m below surface. Static pump unit immersed under water shall not be greater than 70 m.
4. Electrical from the bottom of the bottom of the well shall be not less than 3 m.
5. The water temperature no higher than 20 ° C, QJR-temperature hot water pump up to 80 ° C.
6. Water and sand content (by mass) of not more than 0.01%.
7. Water PH 6.5-8.5.
8. The hydrogen sulfide in water content is not more than 1.5 mg / L.
Application :
deep well water
farm irrigation
sprinkling irrigation
urban and rural industry
mine supply and drainage.
Shenlong pump Ltd is located at the beautiful shore of the Yellow River and at the foot of the mountains of Mangshan, ZhengZhou City in the heart of Henan province.
The company was created in the 1980s, And after the company's combined relentless efforts has become one of the largest modern enterprises in Henan that combines Research and Development (R&D), Prototype Design, Product testing, Advanced industrial production, and operational excellence.
Shenlong pump Ltd is a design manufacture export professional company. Our Enterprise is Ministry of Agriculture. We are production and sales pumps around the world. The manufacture have strong technical force, with all kinds of machine tools, planer, drill press, etc. and The manufacture's total land area of over 660000 Square meters and with in excess of 300 equipment sets. Employing 860 staff members; amongst them over 40 senior technical experts. The allocation of B-level exceeds the national standard of computer Pump testing centers.
Flow: 15m3/h
Head: 39m
Power: 4kw
Material: cast iron
Medium: clean water
Outlet dia: 50mm
Diameter: 175mm
Speed: 2850r/min
Voltage: 380V
Phase: 3 phase/50Hz
Color: Blue
QJ Submersible pumps Parameters:
Flow range10~500m3/h, Lift scope within 5~405m;
Caliber scope 32~203mm, Temperature range-15~80° C.
Products Overview:
QJ Series submersible pumps widely used in farmland irrigation, spray irrigation and water-use, industrial and civil buildings, also the drainage system to level hills, mountain diversion and in low-lying areas dunes, urban and rural mining supply, drainage and other water conservancy facilities. Characteristics are that they are assembled into a simple structure they have installation convenience a small footprint, simple maintenance and a safe reliable operation.
Product use conditions:
QJ Submersible pumps use conditions
1. 380 V bias voltage does not exceed + -5% and 50 HZ frequency, and the deviation is not more than + -1% of the three-phase power supply.
2. Electrical cavity must be filled with water.
3. The first-class pump impeller should at least go into the dynamic water level 2 m below surface. Static pump unit immersed under water shall not be greater than 70 m.
4. Electrical from the bottom of the bottom of the well shall be not less than 3 m.
5. The water temperature no higher than 20 ° C, QJR-temperature hot water pump up to 80 ° C.
6. Water and sand content (by mass) of not more than 0.01%.
7. Water PH 6.5-8.5.
8. The hydrogen sulfide in water content is not more than 1.5 mg / L.
Application :
deep well water
farm irrigation
sprinkling irrigation
urban and rural industry
mine supply and drainage.
Shenlong pump Ltd is located at the beautiful shore of the Yellow River and at the foot of the mountains of Mangshan, ZhengZhou City in the heart of Henan province.
The company was created in the 1980s, And after the company's combined relentless efforts has become one of the largest modern enterprises in Henan that combines Research and Development (R&D), Prototype Design, Product testing, Advanced industrial production, and operational excellence.
Shenlong pump Ltd is a design manufacture export professional company. Our Enterprise is Ministry of Agriculture. We are production and sales pumps around the world. The manufacture have strong technical force, with all kinds of machine tools, planer, drill press, etc. and The manufacture's total land area of over 660000 Square meters and with in excess of 300 equipment sets. Employing 860 staff members; amongst them over 40 senior technical experts. The allocation of B-level exceeds the national standard of computer Pump testing centers.
Flow: 15m3/h
Head: 54m
Power: 4kw
Material: cast iron
Medium: clean water
Outlet dia: 50mm
Diameter: 175mm
Speed: 2850r/min
Voltage: 380V
Phase: 3 phase/50Hz
Color: Blue
QJ Submersible pumps Parameters:
Flow range10~500m3/h, Lift scope within 5~405m;
Caliber scope 32~203mm, Temperature range-15~80° C.
Products Overview:
QJ Series submersible pumps widely used in farmland irrigation, spray irrigation and water-use, industrial and civil buildings, also the drainage system to level hills, mountain diversion and in low-lying areas dunes, urban and rural mining supply, drainage and other water conservancy facilities. Characteristics are that they are assembled into a simple structure they have installation convenience a small footprint, simple maintenance and a safe reliable operation.
Product use conditions:
QJ Submersible pumps use conditions
1. 380 V bias voltage does not exceed + -5% and 50 HZ frequency, and the deviation is not more than + -1% of the three-phase power supply.
2. Electrical cavity must be filled with water.
3. The first-class pump impeller should at least go into the dynamic water level 2 m below surface. Static pump unit immersed under water shall not be greater than 70 m.
4. Electrical from the bottom of the bottom of the well shall be not less than 3 m.
5. The water temperature no higher than 20 ° C, QJR-temperature hot water pump up to 80 ° C.
6. Water and sand content (by mass) of not more than 0.01%.
7. Water PH 6.5-8.5.
8. The hydrogen sulfide in water content is not more than 1.5 mg / L.
Application :
deep well water
farm irrigation
sprinkling irrigation
urban and rural industry
mine supply and drainage.
Shenlong pump Ltd is located at the beautiful shore of the Yellow River and at the foot of the mountains of Mangshan, ZhengZhou City in the heart of Henan province.
The company was created in the 1980s, And after the company's combined relentless efforts has become one of the largest modern enterprises in Henan that combines Research and Development (R&D), Prototype Design, Product testing, Advanced industrial production, and operational excellence.
Shenlong pump Ltd is a design manufacture export professional company. Our Enterprise is Ministry of Agriculture. We are production and sales pumps around the world. The manufacture have strong technical force, with all kinds of machine tools, planer, drill press, etc. and The manufacture's total land area of over 660000 Square meters and with in excess of 300 equipment sets. Employing 860 staff members; amongst them over 40 senior technical experts. The allocation of B-level exceeds the national standard of computer Pump testing centers.
Sqj submersible pumps parameters:
Flow range10~500m3/h, lift scope within 5~405m;
Caliber scope 32~203mm, temperature range-15~80° c.
Products overview
Sqj series submersible pumps widely used in farmland irrigation, spray irrigation and water-use, industrial and civil buildings, also the drainage system to level hills, mountain diversion and in low-lying areas dunes, urban and rural mining supply, drainage and other water conservancy facilities. Characteristics are that they are assembled into a simple structure they have installation convenience a small footprint, simple maintenance and a safe reliable operation.
Product use conditions
1. Sqj submersible pumps use conditions:
(1)380 v bias voltage does not exceed +/-10% and 50 hz frequency, and the deviation is not more than + -1% of the three-phase power supply.
(2) Electrical cavity must be filled with water during operation.
(3)the first-class pump impeller should at least go into a dynamic water level 2 m below surface. Static pump unit immersed under water shall not be greater than 70 m in depth.
(4)the normal water temperature should be no higher than 20 ° c, qjr- hot water pump temperature up to 80 ° c.
(5)water and sand content (by mass) of not more than 0.01%.
(6)water ph 6.5-8.5.
(7)the hydrogen sulfide in water content is not more than 1.5 mg / l.
Products overview
Sqj, sqs, sqy, series submersible pumps widely used in farmland irrigation, spray irrigation and water-use, industrial and civil buildings, also the drainage system to level hills, mountain diversion and in low-lying areas dunes, urban and rural mining supply, drainage and other water conservancy facilities. Characteristics are that they are assembled into a simple structure they have installation convenience a small footprint, simple maintenance and a safe reliable operation.
Product use conditions:
1.380 v bias voltage does not exceed +/-10% and 50 hz frequency, and the deviation is not more than + -1% of the three-phase power supply.
2.Electrical cavity must be filled with water during operation.
3.The first-class pump impeller should at least go into a dynamic water level 2 m below surface. Static pump unit immersed under water shall not be greater than 70 m in depth.
4.The normal water temperature should be no higher than 20 ° c, qjr- hot water pump temperature up to 80 ° c.
5.Water and sand content (by mass) of not more than 0.01%.
6.Water ph 6.5-8.5.
7.The hydrogen sulfide in water content is not more than 1.5 mg / l.
Cast iron or stanless steel blue qy oil immersed submersible pumps
Qy oil immersed submersible pumps parameters:
Flow range10~250m3/h, lift scope within 5~120m;
Caliber scope 51~152mm, temperature range
Stainless steel submersible water well pump
Submersible deep well pumps
Sqj , sqs, sqy submersible pump series parameters
Sqj submersible pumps parameters:
Flow range10~500m3/h, lift scope within 5~405m;
Caliber scope 32~203mm, temperature range-15~80° c.
Sqs bearing submersible pumps parameters:
Flow range10~250m3/h, lift scope within 5~12m;
Caliber scope 30~150mm, temperature range
Qjr hot water submersible pump
Flow: 10~500m3/h
Lift: 15~405m
Caliber: ?175~?400mm
Power: 0.4-160kw
Temperature: =140 ?
Qualitycertificate: one year warranty and lifelong maintenance
Qjr submersible hot water pump overview:
This machine is used to deliver water. It has submersible motor and works under water. It is mainly used for farmland irrigation, water supply and water drainage in cities, factories and mines.
Qjr series spring pump is widely used in special occasions like heating for warmth, physiotherapy, health care, earth energy utilization, etc. Its motor and pump are united into one. Its structure is simple, easy to install and disassemble, taking little floor space. It is easy to use and maintain, works safely and reliably, causing no pollution to water source.
Qjr submersible hot water pump application range:
1. To collect hot water from boilers for secondary use
2. To collect water that leaks from heating pipelines in winter for secondary use
3. To collect cooling water in factories for secondary use (the pump should be submerged in water when working)
4. To deliver high temperature water through heat-supply system
5. To be used for heat-supply equipment maintenance
6. To supply hot water for bath center
7. To draw water from underground hotsprings, etc.
Flow: 15m3/h
Head: 26m
Power: 2.2kw
Material: cast iron
Medium: clean water
Outlet dia: 50mm
Diameter: 175mm
Speed: 2850r/min
Voltage: 380V
Phase: 3 phase/50Hz
Color: Blue
QJ Submersible pumps Parameters:
Flow range10~500m3/h, Lift scope within 5~405m;
Caliber scope 32~203mm, Temperature range-15~80° C.
Products Overview:
QJ Series submersible pumps widely used in farmland irrigation, spray irrigation and water-use, industrial and civil buildings, also the drainage system to level hills, mountain diversion and in low-lying areas dunes, urban and rural mining supply, drainage and other water conservancy facilities. Characteristics are that they are assembled into a simple structure they have installation convenience a small footprint, simple maintenance and a safe reliable operation.
Product use conditions:
QJ Submersible pumps use conditions
1. 380 V bias voltage does not exceed + -5% and 50 HZ frequency, and the deviation is not more than + -1% of the three-phase power supply.
2. Electrical cavity must be filled with water.
3. The first-class pump impeller should at least go into the dynamic water level 2 m below surface. Static pump unit immersed under water shall not be greater than 70 m.
4. Electrical from the bottom of the bottom of the well shall be not less than 3 m.
5. The water temperature no higher than 20 ° C, QJR-temperature hot water pump up to 80 ° C.
6. Water and sand content (by mass) of not more than 0.01%.
7. Water PH 6.5-8.5.
8. The hydrogen sulfide in water content is not more than 1.5 mg / L.
Application :
deep well water
farm irrigation
sprinkling irrigation
urban and rural industry
mine supply and drainage.
Shenlong pump Ltd is located at the beautiful shore of the Yellow River and at the foot of the mountains of Mangshan, ZhengZhou City in the heart of Henan province.
The company was created in the 1980s, And after the company's combined relentless efforts has become one of the largest modern enterprises in Henan that combines Research and Development (R&D), Prototype Design, Product testing, Advanced industrial production, and operational excellence.
Shenlong pump Ltd is a design manufacture export professional company. Our Enterprise is Ministry of Agriculture. We are production and sales pumps around the world. The manufacture have strong technical force, with all kinds of machine tools, planer, drill press, etc. and The manufacture's total land area of over 660000 Square meters and with in excess of 300 equipment sets. Employing 860 staff members; amongst them over 40 senior technical experts. The allocation of B-level exceeds the national standard of computer Pump testing centers.
Flow: 20m3/h
Head: 64m
Power: 7.5kw
Material: cast iron
Medium: clean water
Outlet dia: 60mm
Diameter: 175mm
Speed: 2850r/min
Voltage: 380V
Phase: 3 phase/50Hz
Color: Blue
QJ Submersible pumps Parameters:
Flow range10~500m3/h, Lift scope within 5~405m;
Caliber scope 32~203mm, Temperature range-15~80° C.
Products Overview:
QJ Series submersible pumps widely used in farmland irrigation, spray irrigation and water-use, industrial and civil buildings, also the drainage system to level hills, mountain diversion and in low-lying areas dunes, urban and rural mining supply, drainage and other water conservancy facilities. Characteristics are that they are assembled into a simple structure they have installation convenience a small footprint, simple maintenance and a safe reliable operation.
Product use conditions:
QJ Submersible pumps use conditions
1. 380 V bias voltage does not exceed + -5% and 50 HZ frequency, and the deviation is not more than + -1% of the three-phase power supply.
2. Electrical cavity must be filled with water.
3. The first-class pump impeller should at least go into the dynamic water level 2 m below surface. Static pump unit immersed under water shall not be greater than 70 m.
4. Electrical from the bottom of the bottom of the well shall be not less than 3 m.
5. The water temperature no higher than 20 ° C, QJR-temperature hot water pump up to 80 ° C.
6. Water and sand content (by mass) of not more than 0.01%.
7. Water PH 6.5-8.5.
8. The hydrogen sulfide in water content is not more than 1.5 mg / L.
Application :
deep well water
farm irrigation
sprinkling irrigation
urban and rural industry
mine supply and drainage.
Flow: 20m3/h
Head: 64m
Power: 7.5kw
Material: cast iron
Medium: clean water
Outlet dia: 60mm
Diameter: 175mm
Speed: 2850r/min
Voltage: 380V
Phase: 3 phase/50Hz
Color: Blue
Deep well submersible water pump Overview:
Filed with: water
Flow range: 10—250m3/h;
Head range:5—121m;
Diameter scope:f30—f150mm;
Temperature range: =30?.
Deep well submersible water pump is widely used in various kinds of water conservancy facilities such as farm irrigation, sprinkler irrigation with water, the supply and drainage system of civil building and, industrial and draining water from the hills and mountainous area, the diversion in low-lying areas, water supply and drainage in urban and rural industrial and mining enterprises etc.
Deep well submersible water pump spare parts &features:
Deep well submersible water pump motor and pump assembled into one.
Deep well submersible water pump has simple structure, easy to use and maintenance.
Electric motor is three-phase asynchronous motor.
Safe and reliable operation, no pollution to water.
Installation of deep well submersible water pump
1. 380V voltage deviation is no more than ±5%, frequency is 50HZ, three -phase power deviation is no more than ±1%.
2. Motorcavity must be filled with water to cooling motor and lubricate bearings .
3. The first stage impeller of the pump should be more than 2mm below the moving water surface, pump unit should be less than 70m below the static water level.
4. The distance from the motor bottom to well bottom must be more than 3m.
5. Water temperature should be no more than 20°C.
6. Sand content of the water ( by mass) should be no more than 0.01%.
7. PH value of water 6.5-8.5.
8. Hydrogen sulfide content of the water should be no more than 1.5mg/L.
9. Chloride ion content of the water should be no more than 400mg/L.
10. Water yield of water source should ensure the requirements of pump continuous working.
Flow: 20m3/h
Head: 78m
Power: 7.5kw
Material: cast iron
Medium: clean water
Outlet dia: 60mm
Diameter: 175mm
Speed: 2850r/min
Voltage: 380V
Phase: 3 phase/50Hz
Color: Blue
Deep well submersible water pump Overview:
Filed with: water
Flow range: 10—250m3/h;
Head range:5—121m;
Diameter scope:f30—f150mm;
Temperature range: =30?.
Deep well submersible water pump is widely used in various kinds of water conservancy facilities such as farm irrigation, sprinkler irrigation with water, the supply and drainage system of civil building and, industrial and draining water from the hills and mountainous area, the diversion in low-lying areas, water supply and drainage in urban and rural industrial and mining enterprises etc.
Deep well submersible water pump spare parts &features:
Deep well submersible water pump motor and pump assembled into one.
Deep well submersible water pump has simple structure, easy to use and maintenance.
Electric motor is three-phase asynchronous motor.
Safe and reliable operation, no pollution to water.
Installation of deep well submersible water pump
1. 380V voltage deviation is no more than ±5%, frequency is 50HZ, three -phase power deviation is no more than ±1%.
2. Motorcavity must be filled with water to cooling motor and lubricate bearings .
3. The first stage impeller of the pump should be more than 2mm below the moving water surface, pump unit should be less than 70m below the static water level.
4. The distance from the motor bottom to well bottom must be more than 3m.
5. Water temperature should be no more than 20°C.
6. Sand content of the water ( by mass) should be no more than 0.01%.
7. PH value of water 6.5-8.5.
8. Hydrogen sulfide content of the water should be no more than 1.5mg/L.
9. Chloride ion content of the water should be no more than 400mg/L.
10. Water yield of water source should ensure the requirements of pump continuous working.
Flow: 20m3/h
Head: 91m
Power: 9.2kw
Material: cast iron
Medium: clean water
Outlet dia: 60mm
Diameter: 175mm
Speed: 2850r/min
Voltage: 380V
Phase: 3 phase/50Hz
Color: Blue
Deep well submersible water pump Overview:
Filed with: water
Flow range: 10—250m3/h;
Head range:5—121m;
Diameter scope:f30—f150mm;
Temperature range: =30?.
Deep well submersible water pump is widely used in various kinds of water conservancy facilities such as farm irrigation, sprinkler irrigation with water, the supply and drainage system of civil building and, industrial and draining water from the hills and mountainous area, the diversion in low-lying areas, water supply and drainage in urban and rural industrial and mining enterprises etc.
Deep well submersible water pump spare parts &features:
Deep well submersible water pump motor and pump assembled into one.
Deep well submersible water pump has simple structure, easy to use and maintenance.
Electric motor is three-phase asynchronous motor.
Safe and reliable operation, no pollution to water.
Installation of deep well submersible water pump
1. 380V voltage deviation is no more than ±5%, frequency is 50HZ, three -phase power deviation is no more than ±1%.
2. Motorcavity must be filled with water to cooling motor and lubricate bearings .
3. The first stage impeller of the pump should be more than 2mm below the moving water surface, pump unit should be less than 70m below the static water level.
4. The distance from the motor bottom to well bottom must be more than 3m.
5. Water temperature should be no more than 20°C.
6. Sand content of the water ( by mass) should be no more than 0.01%.
7. PH value of water 6.5-8.5.
8. Hydrogen sulfide content of the water should be no more than 1.5mg/L.
9. Chloride ion content of the water should be no more than 400mg/L.
10. Water yield of water source should ensure the requirements of pump continuous working.
Flow: 20m3/h
Head: 130m
Power: 15kw
Material: cast iron
Medium: clean water
Outlet dia: 60mm
Diameter: 175mm
Speed: 2850r/min
Voltage: 380V
Phase: 3 phase/50Hz
Color: Blue
Deep well submersible water pump Overview:
Filed with: water
Flow range: 10—250m3/h;
Head range:5—121m;
Diameter scope:f30—f150mm;
Temperature range: =30?.
Deep well submersible water pump is widely used in various kinds of water conservancy facilities such as farm irrigation, sprinkler irrigation with water, the supply and drainage system of civil building and, industrial and draining water from the hills and mountainous area, the diversion in low-lying areas, water supply and drainage in urban and rural industrial and mining enterprises etc.
Deep well submersible water pump spare parts &features:
Deep well submersible water pump motor and pump assembled into one.
Deep well submersible water pump has simple structure, easy to use and maintenance.
Electric motor is three-phase asynchronous motor.
Safe and reliable operation, no pollution to water.
Installation of deep well submersible water pump
1. 380V voltage deviation is no more than ±5%, frequency is 50HZ, three -phase power deviation is no more than ±1%.
2. Motorcavity must be filled with water to cooling motor and lubricate bearings .
3. The first stage impeller of the pump should be more than 2mm below the moving water surface, pump unit should be less than 70m below the static water level.
4. The distance from the motor bottom to well bottom must be more than 3m.
5. Water temperature should be no more than 20°C.
6. Sand content of the water ( by mass) should be no more than 0.01%.
7. PH value of water 6.5-8.5.
8. Hydrogen sulfide content of the water should be no more than 1.5mg/L.
9. Chloride ion content of the water should be no more than 400mg/L.
10. Water yield of water source should ensure the requirements of pump continuous working.
Flow: 25m3/h
Head: 78m
Power: 9.2kw
Material: cast iron
Medium: clean water
Outlet dia: 60mm
Diameter: 175mm
Speed: 2850r/min
Voltage: 380V
Phase: 3 phase/50Hz
Color: Blue
Deep well submersible water pump Overview:
Filed with: water
Flow range: 10—250m3/h;
Head range:5—121m;
Diameter scope:f30—f150mm;
Temperature range: =30?.
Deep well submersible water pump is widely used in various kinds of water conservancy facilities such as farm irrigation, sprinkler irrigation with water, the supply and drainage system of civil building and, industrial and draining water from the hills and mountainous area, the diversion in low-lying areas, water supply and drainage in urban and rural industrial and mining enterprises etc.
Deep well submersible water pump spare parts &features:
Deep well submersible water pump motor and pump assembled into one.
Deep well submersible water pump has simple structure, easy to use and maintenance.
Electric motor is three-phase asynchronous motor.
Safe and reliable operation, no pollution to water.
Installation of deep well submersible water pump
1. 380V voltage deviation is no more than ±5%, frequency is 50HZ, three -phase power deviation is no more than ±1%.
2. Motorcavity must be filled with water to cooling motor and lubricate bearings .
3. The first stage impeller of the pump should be more than 2mm below the moving water surface, pump unit should be less than 70m below the static water level.
4. The distance from the motor bottom to well bottom must be more than 3m.
5. Water temperature should be no more than 20°C.
6. Sand content of the water ( by mass) should be no more than 0.01%.
7. PH value of water 6.5-8.5.
8. Hydrogen sulfide content of the water should be no more than 1.5mg/L.
9. Chloride ion content of the water should be no more than 400mg/L.
10. Water yield of water source should ensure the requirements of pump continuous working.
Flow: 25m3/h
Head: 91m
Power: 11kw
Material: cast iron
Medium: clean water
Outlet dia: 60mm
Diameter: 175mm
Speed: 2850r/min
Voltage: 380V
Phase: 3 phase/50Hz
Color: Blue
Deep well submersible water pump Overview:
Filed with: water
Flow range: 10—250m3/h;
Head range:5—121m;
Diameter scope:f30—f150mm;
Temperature range: =30?.
Deep well submersible water pump is widely used in various kinds of water conservancy facilities such as farm irrigation, sprinkler irrigation with water, the supply and drainage system of civil building and, industrial and draining water from the hills and mountainous area, the diversion in low-lying areas, water supply and drainage in urban and rural industrial and mining enterprises etc.
Deep well submersible water pump spare parts &features:
Deep well submersible water pump motor and pump assembled into one.
Deep well submersible water pump has simple structure, easy to use and maintenance.
Electric motor is three-phase asynchronous motor.
Safe and reliable operation, no pollution to water.
Installation of deep well submersible water pump
1. 380V voltage deviation is no more than ±5%, frequency is 50HZ, three -phase power deviation is no more than ±1%.
2. Motorcavity must be filled with water to cooling motor and lubricate bearings .
3. The first stage impeller of the pump should be more than 2mm below the moving water surface, pump unit should be less than 70m below the static water level.
4. The distance from the motor bottom to well bottom must be more than 3m.
5. Water temperature should be no more than 20°C.
6. Sand content of the water ( by mass) should be no more than 0.01%.
7. PH value of water 6.5-8.5.
8. Hydrogen sulfide content of the water should be no more than 1.5mg/L.
9. Chloride ion content of the water should be no more than 400mg/L.
10. Water yield of water source should ensure the requirements of pump continuous working.
Submersible water pumps , deep well pump, centrifugal pump, stainless steel pump
Model:200QJ25-42/3
Flow: 25m3/h
Head: 42m
Power: 5.5kw
Material:Cast iron/stainless steel
Impeller material:Cast Iron/stainless steel
Pressure:Low Pressure
Warranty:12 Months
Color:Blue
Place of Origin: ,China (Mainland)
Deep well submersible water pump Overview:
deep well submersible water pump is widely used in various kinds of water conservancy facilities such as farm irrigation, sprinkler irrigation with water, the supply and drainage system of civil building and, industrial and draining water from the hills and mountainous area, the diversion in low-lying areas, water supply and drainage in urban and rural industrial and mining enterprises etc.
http://www.dragonpump.com/products/qj-deep-well-submersible-pump/
Deep well submersible water pump structure&model meaning
1. Submersible electric pump is composed of five parts: water pump, submersible motor, water line, waterproof cable and control switch. Water pump belongs to single suction multistage vertical centrifugal pump.
2. Submersible motor adopts water-filled wet structure, internal chamber was filled with water for cooling the motor and lubricating the bearing. In the operation, due to the changes of temperature, the pressure of the filled water in the internal chamber also changes, it can be automatically regulated by pressure-regulating unit in the lower part of motor.
3. For preventing the sand getting into the motor, the sand-preventing unit including sand and skeleton oil-sealed was installed in the upper part of motor, the whole motor was sealed tightly.
4. There are water injection hole and exhaust hole in the upper part of the motor and discharge hole in the lower part.
5. There are thrust bearing and thrust collar, mainly for sustaining remnant axial force of pump and the empty weight of motor's rotor.
http://www.dragonpump.com/products/qj-deep-well-submersible-pump/
Deep well submersible water pump spare parts &features:
Deep well submersible water pump motor and pump assembled into one.
Deep well submersible water pump has simple structure, easy to use and maintenance.
Electric motor is three-phase asynchronous motor.
http://www.dragonpump.com/products/qj-deep-well-submersible-pump/
Submersible water pumps , deep well pump, centrifugal pump, stainless steel pump, irrigation pump
Model: 200QJ32-16/1
Flow: 32m3/h
Head: 16m
Power: 3kw
Material:Cast iron/stainless steel
Impeller material:Cast Iron/stainless steel
Pressure:Low Pressure
Warranty:12 Months
Color:Blue
Place of Origin: ,China (Mainland)
Deep well submersible water pump Overview:
deep well submersible water pump is widely used in various kinds of water conservancy facilities such as farm irrigation, sprinkler irrigation with water, the supply and drainage system of civil building and, industrial and draining water from the hills and mountainous area, the diversion in low-lying areas, water supply and drainage in urban and rural industrial and mining enterprises etc.
http://www.dragonpump.com/products/qj-deep-well-submersible-pump/
Deep well submersible water pump structure&model meaning
1. Submersible electric pump is composed of five parts: water pump, submersible motor, water line, waterproof cable and control switch. Water pump belongs to single suction multistage vertical centrifugal pump.
2. Submersible motor adopts water-filled wet structure, internal chamber was filled with water for cooling the motor and lubricating the bearing. In the operation, due to the changes of temperature, the pressure of the filled water in the internal chamber also changes, it can be automatically regulated by pressure-regulating unit in the lower part of motor.
3. For preventing the sand getting into the motor, the sand-preventing unit including sand and skeleton oil-sealed was installed in the upper part of motor, the whole motor was sealed tightly.
4. There are water injection hole and exhaust hole in the upper part of the motor and discharge hole in the lower part.
5. There are thrust bearing and thrust collar, mainly for sustaining remnant axial force of pump and the empty weight of motor's rotor.
http://www.dragonpump.com/products/qj-deep-well-submersible-pump/
Deep well submersible water pump spare parts &features:
Deep well submersible water pump motor and pump assembled into one.
Deep well submersible water pump has simple structure, easy to use and maintenance.
Electric motor is three-phase asynchronous motor.
http://www.dragonpump.com/products/qj-deep-well-submersible-pump/
Flow: 20m3/h
Head: 104m
Power: 11kw
Material: cast iron
Medium: clean water
Outlet dia: 60mm
Diameter: 175mm
Speed: 2850r/min
Voltage: 380V
Phase: 3 phase/50Hz
Color: Blue
Deep well submersible water pump Overview:
Filed with: water
Flow range: 10—250m3/h;
Head range:5—121m;
Diameter scope:f30—f150mm;
Temperature range: =30?.
Deep well submersible water pump is widely used in various kinds of water conservancy facilities such as farm irrigation, sprinkler irrigation with water, the supply and drainage system of civil building and, industrial and draining water from the hills and mountainous area, the diversion in low-lying areas, water supply and drainage in urban and rural industrial and mining enterprises etc.
Deep well submersible water pump spare parts &features:
Deep well submersible water pump motor and pump assembled into one.
Deep well submersible water pump has simple structure, easy to use and maintenance.
Electric motor is three-phase asynchronous motor.
Safe and reliable operation, no pollution to water.
Installation of deep well submersible water pump
1. 380V voltage deviation is no more than ±5%, frequency is 50HZ, three -phase power deviation is no more than ±1%.
2. Motorcavity must be filled with water to cooling motor and lubricate bearings .
3. The first stage impeller of the pump should be more than 2mm below the moving water surface, pump unit should be less than 70m below the static water level.
4. The distance from the motor bottom to well bottom must be more than 3m.
5. Water temperature should be no more than 20°C.
6. Sand content of the water ( by mass) should be no more than 0.01%.
7. PH value of water 6.5-8.5.
8. Hydrogen sulfide content of the water should be no more than 1.5mg/L.
9. Chloride ion content of the water should be no more than 400mg/L.
10. Water yield of water source should ensure the requirements of pump continuous working.
Flow: 20m3/h
Head: 117m
Power: 13kw
Material: cast iron
Medium: clean water
Outlet dia: 60mm
Diameter: 175mm
Speed: 2850r/min
Voltage: 380V
Phase: 3 phase/50Hz
Color: Blue
Deep well submersible water pump Overview:
Filed with: water
Flow range: 10—250m3/h;
Head range:5—121m;
Diameter scope:f30—f150mm;
Temperature range: =30?.
Deep well submersible water pump is widely used in various kinds of water conservancy facilities such as farm irrigation, sprinkler irrigation with water, the supply and drainage system of civil building and, industrial and draining water from the hills and mountainous area, the diversion in low-lying areas, water supply and drainage in urban and rural industrial and mining enterprises etc.
Deep well submersible water pump spare parts &features:
Deep well submersible water pump motor and pump assembled into one.
Deep well submersible water pump has simple structure, easy to use and maintenance.
Electric motor is three-phase asynchronous motor.
Safe and reliable operation, no pollution to water.
Installation of deep well submersible water pump
1. 380V voltage deviation is no more than ±5%, frequency is 50HZ, three -phase power deviation is no more than ±1%.
2. Motorcavity must be filled with water to cooling motor and lubricate bearings .
3. The first stage impeller of the pump should be more than 2mm below the moving water surface, pump unit should be less than 70m below the static water level.
4. The distance from the motor bottom to well bottom must be more than 3m.
5. Water temperature should be no more than 20°C.
6. Sand content of the water ( by mass) should be no more than 0.01%.
7. PH value of water 6.5-8.5.
8. Hydrogen sulfide content of the water should be no more than 1.5mg/L.
9. Chloride ion content of the water should be no more than 400mg/L.
10. Water yield of water source should ensure the requirements of pump continuous working.
Flow: 25m3/h
Head: 65m
Power: 7.5kw
Material: cast iron
Medium: clean water
Outlet dia: 60mm
Diameter: 175mm
Speed: 2850r/min
Voltage: 380V
Phase: 3 phase/50Hz
Color: Blue
Deep well submersible water pump Overview:
Filed with: water
Flow range: 10—250m3/h;
Head range:5—121m;
Diameter scope:f30—f150mm;
Temperature range: =30?.
Deep well submersible water pump is widely used in various kinds of water conservancy facilities such as farm irrigation, sprinkler irrigation with water, the supply and drainage system of civil building and, industrial and draining water from the hills and mountainous area, the diversion in low-lying areas, water supply and drainage in urban and rural industrial and mining enterprises etc.
Deep well submersible water pump spare parts &features:
Deep well submersible water pump motor and pump assembled into one.
Deep well submersible water pump has simple structure, easy to use and maintenance.
Electric motor is three-phase asynchronous motor.
Safe and reliable operation, no pollution to water.
Installation of deep well submersible water pump
1. 380V voltage deviation is no more than ±5%, frequency is 50HZ, three -phase power deviation is no more than ±1%.
2. Motorcavity must be filled with water to cooling motor and lubricate bearings .
3. The first stage impeller of the pump should be more than 2mm below the moving water surface, pump unit should be less than 70m below the static water level.
4. The distance from the motor bottom to well bottom must be more than 3m.
5. Water temperature should be no more than 20°C.
6. Sand content of the water ( by mass) should be no more than 0.01%.
7. PH value of water 6.5-8.5.
8. Hydrogen sulfide content of the water should be no more than 1.5mg/L.
9. Chloride ion content of the water should be no more than 400mg/L.
10. Water yield of water source should ensure the requirements of pump continuous working.
Material:Cast iron/stainless steel
Impeller material:Cast Iron/stainless steel
Pressure:Low Pressure
Warranty:12 Months
Color:Blue
Place of Origin: ,China (Mainland)
Deep well submersible water pump Overview:
deep well submersible water pump is widely used in various kinds of water conservancy facilities such as farm irrigation, sprinkler irrigation with water, the supply and drainage system of civil building and, industrial and draining water from the hills and mountainous area, the diversion in low-lying areas, water supply and drainage in urban and rural industrial and mining enterprises etc.
Deep well submersible water pump structure&model meaning
1. Submersible electric pump is composed of five parts: water pump, submersible motor, water line, waterproof cable and control switch. Water pump belongs to single suction multistage vertical centrifugal pump.
2. Submersible motor adopts water-filled wet structure, internal chamber was filled with water for cooling the motor and lubricating the bearing. In the operation, due to the changes of temperature, the pressure of the filled water in the internal chamber also changes, it can be automatically regulated by pressure-regulating unit in the lower part of motor.
3. For preventing the sand getting into the motor, the sand-preventing unit including sand and skeleton oil-sealed was installed in the upper part of motor, the whole motor was sealed tightly.
4. There are water injection hole and exhaust hole in the upper part of the motor and discharge hole in the lower part.
5. There are thrust bearing and thrust collar, mainly for sustaining remnant axial force of pump and the empty weight of motor's rotor.
Deep well submersible water pump spare parts &features:
Deep well submersible water pump motor and pump assembled into one.
Deep well submersible water pump has simple structure, easy to use and maintenance.
Electric motor is three-phase asynchronous motor.
Submersible pump price, deep well pump, centrifugal pump, water pump
Model: 175QJ32-60/5
Flow: 32m3/h
Head: 60m
Power: 9.2kw
Material:Cast iron/stainless steel
Impeller material:Cast Iron/stainless steel
Pressure:Low Pressure
Warranty:12 Months
Color:Blue
Place of Origin: ,China (Mainland)
Deep well submersible water pump Overview:
deep well submersible water pump is widely used in various kinds of water conservancy facilities such as farm irrigation, sprinkler irrigation with water, the supply and drainage system of civil building and, industrial and draining water from the hills and mountainous area, the diversion in low-lying areas, water supply and drainage in urban and rural industrial and mining enterprises etc.
http://www.dragonpump.com/products/qj-deep-well-submersible-pump/
Deep well submersible water pump structure&model meaning
1. Submersible electric pump is composed of five parts: water pump, submersible motor, water line, waterproof cable and control switch. Water pump belongs to single suction multistage vertical centrifugal pump.
2. Submersible motor adopts water-filled wet structure, internal chamber was filled with water for cooling the motor and lubricating the bearing. In the operation, due to the changes of temperature, the pressure of the filled water in the internal chamber also changes, it can be automatically regulated by pressure-regulating unit in the lower part of motor.
3. For preventing the sand getting into the motor, the sand-preventing unit including sand and skeleton oil-sealed was installed in the upper part of motor, the whole motor was sealed tightly.
4. There are water injection hole and exhaust hole in the upper part of the motor and discharge hole in the lower part.
5. There are thrust bearing and thrust collar, mainly for sustaining remnant axial force of pump and the empty weight of motor's rotor.
http://www.dragonpump.com/products/qj-deep-well-submersible-pump/
Deep well submersible water pump spare parts &features:
Deep well submersible water pump motor and pump assembled into one.
Deep well submersible water pump has simple structure, easy to use and maintenance.
Electric motor is three-phase asynchronous motor.
http://www.dragonpump.com/products/qj-deep-well-submersible-pump/
Submersible water pumps for mining, deep well pump, centrifugal pump, stainless steel pump
Model: 200QJ20-30/2
Flow: 20m3/h
Head: 30m
Power: 3kw
Material:Cast iron/stainless steel
Impeller material:Cast Iron/stainless steel
Pressure:Low Pressure
Warranty:12 Months
Color:Blue
Place of Origin: ,China (Mainland)
Deep well submersible water pump Overview:
deep well submersible water pump is widely used in various kinds of water conservancy facilities such as farm irrigation, sprinkler irrigation with water, the supply and drainage system of civil building and, industrial and draining water from the hills and mountainous area, the diversion in low-lying areas, water supply and drainage in urban and rural industrial and mining enterprises etc.
http://www.dragonpump.com/products/qj-deep-well-submersible-pump/
Deep well submersible water pump structure&model meaning
1. Submersible electric pump is composed of five parts: water pump, submersible motor, water line, waterproof cable and control switch. Water pump belongs to single suction multistage vertical centrifugal pump.
2. Submersible motor adopts water-filled wet structure, internal chamber was filled with water for cooling the motor and lubricating the bearing. In the operation, due to the changes of temperature, the pressure of the filled water in the internal chamber also changes, it can be automatically regulated by pressure-regulating unit in the lower part of motor.
3. For preventing the sand getting into the motor, the sand-preventing unit including sand and skeleton oil-sealed was installed in the upper part of motor, the whole motor was sealed tightly.
4. There are water injection hole and exhaust hole in the upper part of the motor and discharge hole in the lower part.
5. There are thrust bearing and thrust collar, mainly for sustaining remnant axial force of pump and the empty weight of motor's rotor.
http://www.dragonpump.com/products/qj-deep-well-submersible-pump/
Deep well submersible water pump spare parts &features:
Deep well submersible water pump motor and pump assembled into one.
Deep well submersible water pump has simple structure, easy to use and maintenance.
Electric motor is three-phase asynchronous motor.
http://www.dragonpump.com/products/qj-deep-well-submersible-pump/
Submersible water pumps for mining, deep well pump, centrifugal pump, stainless steel pump
Model:200QJ20-30/2
Flow: 20m3/h
Head: 30m
Power: 3kw
Material:Cast iron/stainless steel
Impeller material:Cast Iron/stainless steel
Pressure:Low Pressure
Warranty:12 Months
Color:Blue
Place of Origin: ,China (Mainland)
Deep well submersible water pump Overview:
deep well submersible water pump is widely used in various kinds of water conservancy facilities such as farm irrigation, sprinkler irrigation with water, the supply and drainage system of civil building and, industrial and draining water from the hills and mountainous area, the diversion in low-lying areas, water supply and drainage in urban and rural industrial and mining enterprises etc.
http://www.dragonpump.com/products/qj-deep-well-submersible-pump/
Deep well submersible water pump structure&model meaning
1. Submersible electric pump is composed of five parts: water pump, submersible motor, water line, waterproof cable and control switch. Water pump belongs to single suction multistage vertical centrifugal pump.
2. Submersible motor adopts water-filled wet structure, internal chamber was filled with water for cooling the motor and lubricating the bearing. In the operation, due to the changes of temperature, the pressure of the filled water in the internal chamber also changes, it can be automatically regulated by pressure-regulating unit in the lower part of motor.
3. For preventing the sand getting into the motor, the sand-preventing unit including sand and skeleton oil-sealed was installed in the upper part of motor, the whole motor was sealed tightly.
4. There are water injection hole and exhaust hole in the upper part of the motor and discharge hole in the lower part.
5. There are thrust bearing and thrust collar, mainly for sustaining remnant axial force of pump and the empty weight of motor's rotor.
http://www.dragonpump.com/products/qj-deep-well-submersible-pump/
Deep well submersible water pump spare parts &features:
Deep well submersible water pump motor and pump assembled into one.
Deep well submersible water pump has simple structure, easy to use and maintenance.
Electric motor is three-phase asynchronous motor.
http://www.dragonpump.com/products/qj-deep-well-submersible-pump/
Submersible water pumps , deep well pump, centrifugal pump, stainless steel pump
Model: 200QJ63-28/2
Flow: 63m3/h
Head: 28m
Power: 7.5kw
Material:Cast iron/stainless steel
Impeller material:Cast Iron/stainless steel
Pressure:Low Pressure
Warranty:12 Months
Color:Blue
Place of Origin: ,China (Mainland)
Deep well submersible water pump Overview:
deep well submersible water pump is widely used in various kinds of water conservancy facilities such as farm irrigation, sprinkler irrigation with water, the supply and drainage system of civil building and, industrial and draining water from the hills and mountainous area, the diversion in low-lying areas, water supply and drainage in urban and rural industrial and mining enterprises etc.
http://www.dragonpump.com/products/qj-deep-well-submersible-pump/
Deep well submersible water pump structure&model meaning
1. Submersible electric pump is composed of five parts: water pump, submersible motor, water line, waterproof cable and control switch. Water pump belongs to single suction multistage vertical centrifugal pump.
2. Submersible motor adopts water-filled wet structure, internal chamber was filled with water for cooling the motor and lubricating the bearing. In the operation, due to the changes of temperature, the pressure of the filled water in the internal chamber also changes, it can be automatically regulated by pressure-regulating unit in the lower part of motor.
3. For preventing the sand getting into the motor, the sand-preventing unit including sand and skeleton oil-sealed was installed in the upper part of motor, the whole motor was sealed tightly.
4. There are water injection hole and exhaust hole in the upper part of the motor and discharge hole in the lower part.
5. There are thrust bearing and thrust collar, mainly for sustaining remnant axial force of pump and the empty weight of motor's rotor.
http://www.dragonpump.com/products/qj-deep-well-submersible-pump/
Deep well submersible water pump spare parts &features:
Deep well submersible water pump motor and pump assembled into one.
Deep well submersible water pump has simple structure, easy to use and maintenance.
Electric motor is three-phase asynchronous motor.
http://www.dragonpump.com/products/qj-deep-well-submersible-pump/
Submersible water pumps , deep well pump, centrifugal pump, stainless steel pump
Model: 200QJ80-11/1
Flow: 80m3/h
Head: 11m
Power: 4kw
Material:Cast iron/stainless steel
Impeller material:Cast Iron/stainless steel
Pressure:Low Pressure
Warranty:12 Months
Color:Blue
Place of Origin: ,China (Mainland)
http://www.dragonpump.com/products/submersible-pump/
Deep well submersible water pump Overview:
deep well submersible water pump is widely used in various kinds of water conservancy facilities such as farm irrigation, sprinkler irrigation with water, the supply and drainage system of civil building and, industrial and draining water from the hills and mountainous area, the diversion in low-lying areas, water supply and drainage in urban and rural industrial and mining enterprises etc.
http://www.dragonpump.com/products/qj-deep-well-submersible-pump/
Deep well submersible water pump structure&model meaning
1. Submersible electric pump is composed of five parts: water pump, submersible motor, water line, waterproof cable and control switch. Water pump belongs to single suction multistage vertical centrifugal pump.
2. Submersible motor adopts water-filled wet structure, internal chamber was filled with water for cooling the motor and lubricating the bearing. In the operation, due to the changes of temperature, the pressure of the filled water in the internal chamber also changes, it can be automatically regulated by pressure-regulating unit in the lower part of motor.
3. For preventing the sand getting into the motor, the sand-preventing unit including sand and skeleton oil-sealed was installed in the upper part of motor, the whole motor was sealed tightly.
4. There are water injection hole and exhaust hole in the upper part of the motor and discharge hole in the lower part.
5. There are thrust bearing and thrust collar, mainly for sustaining remnant axial force of pump and the empty weight of motor's rotor.
http://www.dragonpump.com/products/qj-deep-well-submersible-pump/
Deep well submersible water pump spare parts &features:
Deep well submersible water pump motor and pump assembled into one.
Deep well submersible water pump has simple structure, easy to use and maintenance.
Electric motor is three-phase asynchronous motor.
http://www.dragonpump.com/products/qj-deep-well-submersible-pump/
Wq series submersible sewage pump is mainly used for municipal works, industry bulidings, hotels, hospitals, civil air defence, mines etc. Trade to drain off the sewage, waste water, rainwater and living water in cities containing solid grains and various fabrics.
Service conditions:
1.Based on impellers as center, underwater depth doesn’t exceed 5m,
2. Transferred medium temperature doesn’t exceed 40?
3. Ph: 4-10, it can not transfer liquid with high corrosivity
4. Max density: 1200kg/m3
5. Wq series pumps are submersible pumps. The motor must run under the water.
Wq series pump incude 9 series as follow:
1. Wq submersible sewage pump
2. Wq(o type) submersible sewage pump
3. Wq non-blocking submersible sewage pump
4. Wqs water-filled submersible sewage pump
5. Wqx bottom suction type submersible sewage pump
6. Wqk cutting type submersible sewage pump
7. Wqjy automatic mixed type submersible sewage pump
8. Wqx big flow quantity type submersible sewage pump for mining engineering
9. Wqd/wq whole stainless steel sewage
pump
Os series single-stage double-suction split volute centrifugal pump
Os axially split pump overview:
Model os pumps are single-stage double-suction inter opened spiral casing centrifugal pumps.It is used to water transportation in water plants, air conditioning water circulation, building water supply, irrigation, drainage pump station, electric power station, industrial water supply system, fire-fighting system, and shipbuilding and so on.
Os axially split pump material:
Pump casing:casting pig, ductalloy, cast steel;
Impeller: bronze, casting pig, silicon brass, stainless steel;
Shaft: stainless steel, carbon steel;
Seal-ring on pump casing:bronze, casting pig, silicon brass, stainless steel.
Os axially split pump feature:
1. It has compact structure, nice appearance, good stability and it is easy to install;
2. The optimally designed and stable running double-suction impeller makes the axial force reduced to the minimum and it has a blade-style of excellent hydraulic performance. Both internal surface of the of the pump casing and the impeller's surface are extremely smooth after being precisely cast.They have a notable performance on ovapour-corrosion resisting and a high efficiency.
3.Bearing use skf and nsf bearings to guarantee a stable running, low noise ande long duration.
4.Shaft seal use burgmann mechanical or stuffing seal to ensure a 8000h non-leak running.
5.Installation does not need to adjust when assembly and it can be vertically or horizontally assembled upon the conditions of use on the spot.
Vertical and horizontal type blue cast iron or stainless steel submersible pipeline pump
This series pump that are suitable for environmental requirements quiet place, at the same time, we can provide hot water pump, chemical pump, explosion-proof oil pump, explosion-proof chemical pump and so on many kinds of types.
The pipeline pump series include 4 series:
1. Slgd low speed vertical pipeline booster pump
2. Slwd low speed horizontal pipeline booster pump
3. Slg vertical pipleline booster pump
4. Slw horizontal pipeline booster pump.
Pipeline pump working conditions:
1. Pump pressure of system work less than 1.6mpa, namely the pressure of suction inlet plus the head of pump less than 1.6mpa, when ordering, please indicate the system work pressure. When the import pressure is greater than 0.4mpa, or pump system work pressure is greater than 1.6mpa, shall be told us when you place the order, so that in the manufacturing, pump flow part and connections have made of copper materials.
2. Applicable medium: pure water without corrosive liquid, medium solid not content, volume not more than the unit volume 0.01%, particle size
D type cast iron and ss multistage boiler feeding pump and clean water pump
D type multistage boiler feeding pump overview:
It is widely applied to supply water of low or high pressure boiler. It is also used for high pressure water supply and drainage of industrial and urban. The temperature of medium delivered should be in the range of -20°c to 150°c and the water pump inlet pressure should be less than 0.6m pa.
Product feature:
1. About d model pumps, inlet and exit are both vertically upward. The inlet section, middle section, discharge section and bearing body of pump are connected into one by tightening bolt. Customer can decide the pump stage according to pump head.
2. The rotor part of pump is composed of axis, impeller, shaft sleeve and balance disk, etc. The quantity of impeller is decided by the stage quantity of pump. The components of axis are connected by flat key and spindle nuts. The whole rotor is supported by antifriction bearing or sliding bearing. Balance disc bears axial force instead of bearing. When pump is running, the rotor can move in the same axial direction. Annular ball bearing can not be used about this series of pumps. They are adopted antifriction bearing. Antifriction bearing is lubricated by grease and sliding bearing is lubricated by thin oil. In addition, they can lubricate themselves by oil ring and cool themselves by circulation water.
D type pump
Dg boiler feeding pump
Ih single stage single suction chemical centrifugal pump
Working parameters:
Flow range:6.3m3~400m3/h
Head range:2~125m
Operation temperature:-20-280
Matched power: 0.19~94.56
Working pressure: =1.6mpa
Diameter range: dn50~dn200mm
Speed: 1450, 2900r/min
Overview:
The ih series are newly designed single-stage, single suction and cantilever centrifugal pumps. It is designed according to the international standard iso2858 and manufactured according to the international standard iso5199/dis. Comparing the design guide line with old products, the efficiency is advanced about 5% and the steam corrosion quantity lowered about 2m.
Features
A) economy high efficiency product;
B) stable capability and standard components
C) stainless steel material contain 304, 316l, cd-4mcu, 904, 904l
D) kazak alloys density scope is p=1.0~1.84×103kg/m3
Product use:
It is mainly used in chemical, oil, petrochemical industry, metallurgy, light industry, printing dyeing, pharmaceutics, environment protect, seawater desalt, paper making, food and etc .Industrial departments to transport corrosive medium without suspended grain or medium.
Model meaning :
Ex: ih 80-65-160a
Ih: accordance with the international standard of chemical pump
80: suction diameter (mm)
65: outlet diameter (mm)
160: name impeller in diameter(mm)
A : impeller with the first cut
Flow: 15m3/h
Head: 65m
Power: 5kw
Material: cast iron
Medium: clean water
Outlet dia: 50mm
Diameter: 175mm
Speed: 2850r/min
Voltage: 380V
Phase: 3 phase/50Hz
Color: Blue
QJ Submersible pumps Parameters:
Flow range10~500m3/h, Lift scope within 5~405m;
Caliber scope 32~203mm, Temperature range-15~80° C.
Products Overview:
QJ Series submersible pumps widely used in farmland irrigation, spray irrigation and water-use, industrial and civil buildings, also the drainage system to level hills, mountain diversion and in low-lying areas dunes, urban and rural mining supply, drainage and other water conservancy facilities. Characteristics are that they are assembled into a simple structure they have installation convenience a small footprint, simple maintenance and a safe reliable operation.
Product use conditions:
QJ Submersible pumps use conditions
1. 380 V bias voltage does not exceed + -5% and 50 HZ frequency, and the deviation is not more than + -1% of the three-phase power supply.
2. Electrical cavity must be filled with water.
3. The first-class pump impeller should at least go into the dynamic water level 2 m below surface. Static pump unit immersed under water shall not be greater than 70 m.
4. Electrical from the bottom of the bottom of the well shall be not less than 3 m.
5. The water temperature no higher than 20 ° C, QJR-temperature hot water pump up to 80 ° C.
6. Water and sand content (by mass) of not more than 0.01%.
7. Water PH 6.5-8.5.
8. The hydrogen sulfide in water content is not more than 1.5 mg / L.
Application :
deep well water
farm irrigation
sprinkling irrigation
urban and rural industry
mine supply and drainage.
.
Flow: 15m3/h
Head: 80m
Power: 7.5kw
Material: cast iron
Medium: clean water
Outlet dia: 50mm
Diameter: 175mm
Speed: 2850r/min
Voltage: 380V
Phase: 3 phase/50Hz
Color: Blue
QJ Submersible pumps Parameters:
Flow range10~500m3/h, Lift scope within 5~405m;
Caliber scope 32~203mm, Temperature range-15~80° C.
Products Overview:
QJ Series submersible pumps widely used in farmland irrigation, spray irrigation and water-use, industrial and civil buildings, also the drainage system to level hills, mountain diversion and in low-lying areas dunes, urban and rural mining supply, drainage and other water conservancy facilities. Characteristics are that they are assembled into a simple structure they have installation convenience a small footprint, simple maintenance and a safe reliable operation.
Product use conditions:
QJ Submersible pumps use conditions
1. 380 V bias voltage does not exceed + -5% and 50 HZ frequency, and the deviation is not more than + -1% of the three-phase power supply.
2. Electrical cavity must be filled with water.
3. The first-class pump impeller should at least go into the dynamic water level 2 m below surface. Static pump unit immersed under water shall not be greater than 70 m.
4. Electrical from the bottom of the bottom of the well shall be not less than 3 m.
5. The water temperature no higher than 20 ° C, QJR-temperature hot water pump up to 80 ° C.
6. Water and sand content (by mass) of not more than 0.01%.
7. Water PH 6.5-8.5.
8. The hydrogen sulfide in water content is not more than 1.5 mg / L.
Application :
deep well water
farm irrigation
sprinkling irrigation
urban and rural industry
mine supply and drainage.
Flow: 20m3/h
Head: 30m
Power: 3kw
Material: cast iron
Medium: clean water
Outlet dia: 60mm
Diameter: 175mm
Speed: 2850r/min
Voltage: 380V
Phase: 3 phase/50Hz
Color: Blue
QJ Submersible pumps Parameters:
Flow range10~500m3/h, Lift scope within 5~405m;
Caliber scope 32~203mm, Temperature range-15~80° C.
Products Overview:
QJ Series submersible pumps widely used in farmland irrigation, spray irrigation and water-use, industrial and civil buildings, also the drainage system to level hills, mountain diversion and in low-lying areas dunes, urban and rural mining supply, drainage and other water conservancy facilities. Characteristics are that they are assembled into a simple structure they have installation convenience a small footprint, simple maintenance and a safe reliable operation.
Product use conditions:
QJ Submersible pumps use conditions
1. 380 V bias voltage does not exceed + -5% and 50 HZ frequency, and the deviation is not more than + -1% of the three-phase power supply.
2. Electrical cavity must be filled with water.
3. The first-class pump impeller should at least go into the dynamic water level 2 m below surface. Static pump unit immersed under water shall not be greater than 70 m.
4. Electrical from the bottom of the bottom of the well shall be not less than 3 m.
5. The water temperature no higher than 20 ° C, QJR-temperature hot water pump up to 80 ° C.
6. Water and sand content (by mass) of not more than 0.01%.
7. Water PH 6.5-8.5.
8. The hydrogen sulfide in water content is not more than 1.5 mg / L.
Application :
deep well water
farm irrigation
sprinkling irrigation
urban and rural industry
mine supply and drainage.
Flow: 20m3/h
Head: 40m
Power: 4kw
Material: cast iron
Medium: clean water
Outlet dia: 60mm
Diameter: 175mm
Speed: 2850r/min
Voltage: 380V
Phase: 3 phase/50Hz
Color: Blue
QJ Submersible pumps Parameters:
Flow range10~500m3/h, Lift scope within 5~405m;
Caliber scope 32~203mm, Temperature range-15~80° C.
Products Overview:
QJ Series submersible pumps widely used in farmland irrigation, spray irrigation and water-use, industrial and civil buildings, also the drainage system to level hills, mountain diversion and in low-lying areas dunes, urban and rural mining supply, drainage and other water conservancy facilities. Characteristics are that they are assembled into a simple structure they have installation convenience a small footprint, simple maintenance and a safe reliable operation.
Product use conditions:
QJ Submersible pumps use conditions
1. 380 V bias voltage does not exceed + -5% and 50 HZ frequency, and the deviation is not more than + -1% of the three-phase power supply.
2. Electrical cavity must be filled with water.
3. The first-class pump impeller should at least go into the dynamic water level 2 m below surface. Static pump unit immersed under water shall not be greater than 70 m.
4. Electrical from the bottom of the bottom of the well shall be not less than 3 m.
5. The water temperature no higher than 20 ° C, QJR-temperature hot water pump up to 80 ° C.
6. Water and sand content (by mass) of not more than 0.01%.
7. Water PH 6.5-8.5.
8. The hydrogen sulfide in water content is not more than 1.5 mg / L.
Application :
deep well water
farm irrigation
sprinkling irrigation
urban and rural industry
mine supply and drainage.
Flow: 20m3/h
Head: 54m
Power: 5.5kw
Material: cast iron
Medium: clean water
Outlet dia: 60mm
Diameter: 175mm
Speed: 2850r/min
Voltage: 380V
Phase: 3 phase/50Hz
Color: Blue
QJ Submersible pumps Parameters:
Flow range10~500m3/h, Lift scope within 5~405m;
Caliber scope 32~203mm, Temperature range-15~80° C.
Products Overview:
QJ Series submersible pumps widely used in farmland irrigation, spray irrigation and water-use, industrial and civil buildings, also the drainage system to level hills, mountain diversion and in low-lying areas dunes, urban and rural mining supply, drainage and other water conservancy facilities. Characteristics are that they are assembled into a simple structure they have installation convenience a small footprint, simple maintenance and a safe reliable operation.
Product use conditions:
QJ Submersible pumps use conditions
1. 380 V bias voltage does not exceed + -5% and 50 HZ frequency, and the deviation is not more than + -1% of the three-phase power supply.
2. Electrical cavity must be filled with water.
3. The first-class pump impeller should at least go into the dynamic water level 2 m below surface. Static pump unit immersed under water shall not be greater than 70 m.
4. Electrical from the bottom of the bottom of the well shall be not less than 3 m.
5. The water temperature no higher than 20 ° C, QJR-temperature hot water pump up to 80 ° C.
6. Water and sand content (by mass) of not more than 0.01%.
7. Water PH 6.5-8.5.
8. The hydrogen sulfide in water content is not more than 1.5 mg / L.
Application :
deep well water
farm irrigation
sprinkling irrigation
urban and rural industry
mine supply and drainage.
Flow: 10m3/h
Head: 10m
Power: 0.75kw
Material: cast iron
Medium: clean water
Outlet dia: 50mm
Speed: 2900r/min
Voltage: 380V
Phase: 3 phase/50Hz
Color: Yellow
Product overview:
The series submersible sewage pump is mainly used for industry,agricultural,fishery,mine drainage,building construction, municipal environmental protection and tunnel construction etc. Trades to drain off soild particles with short fiber, confetti,sediment and so on. Or drain off software solids liquids. Such as mud,grey water, life wastewater, sewage and so on. The series submersible pump is the ideal equipment for agricultural irrigation,raising livestock and poultry manure pit,cleaning the silt of pool and construction site.
Usage:
Used for discharging waste water and other material with granular material, also it can be used for clean water and corrosive medium.
Conditions of using:
1.The medium temperature should not be over 40oC ,PH:4-10.
2.The solid volume ratio of the medium should not be over 2%.
3.The kinematic viscosity of medium between 7*10-7m2/s---23*10-6 m2/s.
4.The density of the medium is 1.2*10 3kg/m3.
5.Centered on the impeller,underwater not more than 5m.
Scope of application:
1. For discharging polluted waste water of factories and industries;
2. sewage discharge station of living quarters;
3. drainage system of municipal sewage treatment plant
4. drainage station of fire fighting system
5. waterworks equipment of running water factory
6. sewage discharge of hospitals and hotels
7. construction site of municipal engineering
8. matched equipment of exploration mine
9. country biogas digester
10.farm irrigation
11. other industries
Flow: 35m3/h
Head: 5m
Power: 0.75kw
Material: cast iron
Outlet dia: 80mm
Speed: 2900r/min
Voltage: 380V
Phase: 3 phase/50Hz
Color: Yellow
Product overview:
The series submersible sewage pump is mainly used for industry,agricultural,fishery,mine drainage,building construction, municipal environmental protection and tunnel construction etc. Trades to drain off soild particles with short fiber, confetti,sediment and so on. Or drain off software solids liquids. Such as mud,grey water, life wastewater, sewage and so on. The series submersible pump is the ideal equipment for agricultural irrigation,raising livestock and poultry manure pit,cleaning the silt of pool and construction site.
Usage:
Used for discharging waste water and other material with granular material, also it can be used for clean water and corrosive medium.
Conditions of using:
1.The medium temperature should not be over 40oC ,PH:4-10.
2.The solid volume ratio of the medium should not be over 2%.
3.The kinematic viscosity of medium between 7*10-7m2/s---23*10-6 m2/s.
4.The density of the medium is 1.2*10 3kg/m3.
5.Centered on the impeller,underwater not more than 5m.
Scope of application:
1. For discharging polluted waste water of factories and industries;
2. sewage discharge station of living quarters;
3. drainage system of municipal sewage treatment plant
4. drainage station of fire fighting system
5. waterworks equipment of running water factory
6. sewage discharge of hospitals and hotels
7. construction site of municipal engineering
8. matched equipment of exploration mine
9. country biogas digester
10.farm irrigation
11. other industries
Flow: 20m3/h
Head: 143m
Power: 11kw
Material: cast iron
Medium: clean water
Outlet dia: 60mm
Diameter: 175mm
Speed: 2850r/min
Voltage: 380V
Phase: 3 phase/50Hz
Color: Blue
Deep well submersible water pump Overview:
Filed with: water
Flow range: 10—250m3/h;
Head range:5—121m;
Diameter scope:f30—f150mm;
Temperature range: =30?.
Deep well submersible water pump is widely used in various kinds of water conservancy facilities such as farm irrigation, sprinkler irrigation with water, the supply and drainage system of civil building and, industrial and draining water from the hills and mountainous area, the diversion in low-lying areas, water supply and drainage in urban and rural industrial and mining enterprises etc.
Deep well submersible water pump spare parts &features:
Deep well submersible water pump motor and pump assembled into one.
Deep well submersible water pump has simple structure, easy to use and maintenance.
Electric motor is three-phase asynchronous motor.
Safe and reliable operation, no pollution to water.
Installation of deep well submersible water pump
1. 380V voltage deviation is no more than ±5%, frequency is 50HZ, three -phase power deviation is no more than ±1%.
2. Motorcavity must be filled with water to cooling motor and lubricate bearings .
3. The first stage impeller of the pump should be more than 2mm below the moving water surface, pump unit should be less than 70m below the static water level.
4. The distance from the motor bottom to well bottom must be more than 3m.
5. Water temperature should be no more than 20°C.
6. Sand content of the water ( by mass) should be no more than 0.01%.
7. PH value of water 6.5-8.5.
8. Hydrogen sulfide content of the water should be no more than 1.5mg/L.
9. Chloride ion content of the water should be no more than 400mg/L.
10. Water yield of water source should ensure the requirements of pump continuous working.
Flow: 25m3/h
Head: 78m
Power: 9.2kw
Material: cast iron
Medium: clean water
Outlet dia: 60mm
Diameter: 175mm
Speed: 2850r/min
Voltage: 380V
Phase: 3 phase/50Hz
Color: Blue
Deep well submersible water pump Overview:
Filed with: water
Flow range: 10—250m3/h;
Head range:5—121m;
Diameter scope:f30—f150mm;
Temperature range: =30?.
Deep well submersible water pump is widely used in various kinds of water conservancy facilities such as farm irrigation, sprinkler irrigation with water, the supply and drainage system of civil building and, industrial and draining water from the hills and mountainous area, the diversion in low-lying areas, water supply and drainage in urban and rural industrial and mining enterprises etc.
Deep well submersible water pump spare parts &features:
Deep well submersible water pump motor and pump assembled into one.
Deep well submersible water pump has simple structure, easy to use and maintenance.
Electric motor is three-phase asynchronous motor.
Safe and reliable operation, no pollution to water.
Installation of deep well submersible water pump
1. 380V voltage deviation is no more than ±5%, frequency is 50HZ, three -phase power deviation is no more than ±1%.
2. Motorcavity must be filled with water to cooling motor and lubricate bearings .
3. The first stage impeller of the pump should be more than 2mm below the moving water surface, pump unit should be less than 70m below the static water level.
4. The distance from the motor bottom to well bottom must be more than 3m.
5. Water temperature should be no more than 20°C.
6. Sand content of the water ( by mass) should be no more than 0.01%.
7. PH value of water 6.5-8.5.
8. Hydrogen sulfide content of the water should be no more than 1.5mg/L.
9. Chloride ion content of the water should be no more than 400mg/L.
10. Water yield of water source should ensure the requirements of pump continuous working.
Stainless steel deep well pump, submersible pump, water pump, centrifugal pump
Model: 175QJ32-48/4
Material:Cast iron/stainless steel
Impeller material:Cast Iron/stainless steel
Pressure:Low Pressure
Warranty:12 Months
Color:Blue
Place of Origin: ,China (Mainland)
Deep well submersible water pump Overview:
deep well submersible water pump is widely used in various kinds of water conservancy facilities such as farm irrigation, sprinkler irrigation with water, the supply and drainage system of civil building and, industrial and draining water from the hills and mountainous area, the diversion in low-lying areas, water supply and drainage in urban and rural industrial and mining enterprises etc.
Deep well submersible water pump structure&model meaning
1. Submersible electric pump is composed of five parts: water pump, submersible motor, water line, waterproof cable and control switch. Water pump belongs to single suction multistage vertical centrifugal pump.
2. Submersible motor adopts water-filled wet structure, internal chamber was filled with water for cooling the motor and lubricating the bearing. In the operation, due to the changes of temperature, the pressure of the filled water in the internal chamber also changes, it can be automatically regulated by pressure-regulating unit in the lower part of motor.
3. For preventing the sand getting into the motor, the sand-preventing unit including sand and skeleton oil-sealed was installed in the upper part of motor, the whole motor was sealed tightly.
4. There are water injection hole and exhaust hole in the upper part of the motor and discharge hole in the lower part.
5. There are thrust bearing and thrust collar, mainly for sustaining remnant axial force of pump and the empty weight of motor's rotor.
Deep well submersible water pump spare parts &features:
Deep well submersible water pump motor and pump assembled into one.
Deep well submersible water pump has simple structure, easy to use and maintenance.
Electric motor is three-phase asynchronous motor.
