Cooling tower fan motor
Output power: 0.18 to 30kw
Power supply: produced by customers' requirements
Type: totally fulled water proof
Protection: ip55
Insulation class: f
Warranty: one year
Feature: water proof
Usage: cooling tower
We supply speed reducer for newin, marley, liangchi, bac cooling tower
Model no.: belt pulley
Material: steel
Condition: new
Diameter: customized
Trademark: newin
Origin: shenzhen china
Cooling method: counter flow or cross flow
Certification: iso, ce, sgs, cti
Drive: belt
Usage: replace for cooling tower
Specification: ce, ul, cti
Hs code: 84195000
Lkz exhaust fan featured with low noise, eletric saving, large air flow, easy installation, which is an ideal choice for sunstroke provention and ventilation in occasions such as varius warehouses, office , flower greenhouse and poltry houses. The product is used to transport non-flammadble, low-corrosive gas with the temperature no higher than 70c, relative humiddity no greater than 90% and the quality of dust and solid impurititres not more than 150mg/m3
Model no.: lkz5a.
Electric current type: ac.
Certification: ce, sgs, ccc.
Power: 0.37kw.
Diameter: 400mm.
Noise: =65db.
Weight: 12kg.
Specification: ce, gb.
Hs code: 84195000.
Blade material: stainless steel.
Mounting: wall fan.
Air flow: 7000m³/h.
Speed: 500r/m.
Voltage: 220/380/415/440/460v.
Dimension: 500*400mm.
Trademark: lkz.
Sf(g) series duct fan featured by low noise, large air volume, electricity saving, ratinal strcture etc. The blades are design based on the ternary flow theory; it has been widely used in chemical, light industry, civil construction and high class hotel and so on. This sereis fan suites for mining industry, workshop, warehouse, or used for pipeline pressure control and air supply, ventilation and roof ventilation. According to user's demand, we can make it fixed status as as sf-i type or adjustable status as sf-ii type..
Model no.: 5g-4.
Electric current type: ac.
Certification: ce, sgs, ccc.
Power: 1.5kw.
Voltage: 220/380/415/440/460v.
Noise: =75db.
Specification: ce, gb.
Hs code: 84195000.
Blade material: steel.
Mounting: wall fan.
Air flow: 8000m³/h.
Speed: 1400r/m.
Pressure: 152pa.
Trademark: lkz..
Htf(a) series fire axial fan is suitable for ventilation and fire control of tall building, subway tunnel, underground stores, gymnasia, etc, this fan sets with double-speed motor, it operates at a low speed normally and auomaticly turn to high speed when fire larms to dicharge the smoke. The air are not allow contain any adhensive materail, dust and grain. Concentration shall not more than 150mg/m3 when temperature not higher than 80degree c. The fan can running 30mins when tempeature of smoke is increase to 280degree c..
Model no.: htf(a)-i-6.
Electric current type: ac.
Certification: ce, sgs, ccc.
Power: 5.5kw.
Voltage: 220/380/415/440/460v.
Noise: =70db.
Specification: ce, gb.
Hs code: 84195000.
Blade material: steel.
Mounting: wall fan.
Air flow: 16090m³/h.
Speed: 2900r/m.
Pressure: 510pa.
Trademark: lkz.
Sprinkler head: aluminum alloy or abs plastic material, high strength, high quality, good price.
Aluminum alloy material:
1.5inch.
2inch.
3inch 4hole.
3inch 6hole.
4inch 4hole.
4inch 6hole.
5inch 4hole.
6inch 4hole.
8inch 6hole.
10inch 8hole
Plastic material:
1.5inch 4hole.
2inch 4hole.
3inch 4hole.
4inch 6hole.
5inch 6hole.
6inch 6hole.
Model no.: 5 inch 4hole.
Ventilation mode: mechanical ventilation.
Air contact form: wet.
Tower shape: round.
Application fields: industrial.
Condition: new.
Nos of hole: 4.
Trademark: newin.
Cooling method: counter flow.
Material: frp.
Air contact way: open.
Noise level: ordinary.
Certification: csa, rohs, ur, iso, ul, ce, sgs, ccc.
Size: 5inch.
Application: round type cooling tower.
Package: wood packing.
Hs code: 84195000.
Port:Shenzhen, china.
Production capacity:50000pieces/year.
Payment terms:L/c, t/t, western union.
Bac cooling tower high quality replacement film fills, 3-years quality guarantee.
Vac formed by antiflamming pvc material, improves thermal performance of the fills by an average of 7.3 % , long service life.
Easy core inspection : sheet by sheet without dismantling
Easy cleaning : sheet by sheet inside the tower
Hanging installation without glue adhesive, bac infill sheet designed with telescopic fill support integrated eliminators and louvers.
Extinguishing pvc material, impervious to rot and biological attack
For temperatures up to 50°c
2) specification
Dimension: 1330 x 2450 mm
1330 x 2560 mm
1330 x 2880 mm or any
Sheet space: 19 mm
Sheet thickness: 0.35-0.4 mm (customized available)
Application: bac cooling tower 3000 series, 1500 series, closed cooling tower fxv series.
Model no.: cross flow
Ventilation mode: mechanical ventilation
Condition: new
Sheet space: 19 mm
Trademark: newin
Origin: china
Cooling method: cross flow
Material: pvc or pp or upvc
Dimension: 1330 x 2450 mm 1330 x 2560
Sheet thickness: 0.35-0.4 mm (customized available)
Package: 20/40/40hq container with loose packing
Hs code: 84195000
Port:Shenzhen, china
Production capacity:1000000mt per year
Payment terms:L/c, t/t, western union
Ntp spindle brand cross flow cooling tower pvc infill
The infill suits for spindle brand cross flow square type cooling towers, with features as below:
1. Using modified pvc sheet, unique modified formula makes the infill strong resistance and high durability.
2. Vac form special processing, the inner side (fan side) edge with integrated liquid baffle plate, and controls the drift loss of water in minimum value. And maximize the heat exchange performance of the water and air.
3. Standard heat temperature of 50 ° c, heatproof specification (optional) can use up to 80 ° c
Ntp series spindle cross flow cooling tower pvc fills material physical performance
Model
Technical parameter
Color
Material
Density
(g/cm3)
High temperature
Resistant (=? )
Low temperature
Resistant (=? )
Oxygen
Index
( = )
Ntp
Pvc
1.4
50
-20
40
Black, gray
Ntp spindle cross flow cooling tower pvc film fills specification
Dimension: 850 x 1000 mm
850 x 500 mm
850 x 400 mm
1000 x 1000 mm
1000 x 1300 mm
Sheet space: 18 mm
Sheet thickness: 0.28-0.5 mm
(customized thickness and size is available.)
Item code: ntp.
Port: shenzhen, china.
Payment: tt, l/c, west union.
Color: black gray.
Lead time: 1-3 weeks.
NTS Shinwa Brand Cross Flow Cooling Tower PVC Infill
The infill suits for Ebara Shinwa cross flow square type cooling towers, with features as below:
1. Using modified PVC sheet, unique modified formula makes the infill strong resistance and high durability.
2. Vac form special processing, the inner side (fan side) edge with integrated liquid baffle plate, and controls the drift loss of water in minimum value, and maximize the heat exchange performance of the water and air.
3. Standard heat temperature of 50 ° C, heatproof specification (optional) can use up to 80 ° C
NTS Series Ebara Shinwa Cross Flow Cooling Tower PVC Fills Material Physical Performance
Model
Technical Parameter
Color
Material
Density
(g/cm3)
High temperature
resistant (=? )
Low temperature
resistant (=? )
Oxygen
index
( = )
NTS
PVC
1.4
50
-20
40
Black,Gray
NTS Shinwa Cross Flow Cooling Tower PVC Film Fills Specification
Dimension: 950 x 950 mm
200 x 950 mm
300 x 950 mm
1270 x 950 mm
Sheet space: 20 mm
Sheet thickness: 0.28-0.5 mm (customized thickness accepted)
Port: Shenzhen, China
Payment: TT, L/C, West Union
Color: Black Gray
Lead Time: 1-3 weeks
Features
light weight, strength, good flame retardant performance, corrosion resistance, advanced design, ventilation resistance is small, strong hydrophilicity, large contact area, etc
Specification:
Dimension: 305x1220mm
305xany
Sheet spacing: 18mm
Sheet thickness: 0.25-0.45mm
Applicable water temperature: 50? ~ -35?
Applicant: Kingsun KFT Counter flow, Square Type, Modular Cell Cooling Tower
Packing and Loading. LCL cargo: wood case / Container Loading:
Trade Terms: FOB, CIF, CFR, DDU.
Payment term: T/T, L/C, West Union
Minimum Order Quantity: 1000pcs
Port: Shenzhen, China
Payment: TT, L/C, West Union
Color: Black
Lead Time: 10 working days
Round Type Cooling Tower Infill, a type of corrugated PVC film fill, which is special design for counter flow round type cooling tower. It is most popular heat-eliminating medium for round type cooling tower. This type of infill made flame retardant PVC material, Thermal formed by mold, the corrugated shape greatly increase the cooling area and greatly lengthen the time water keep on the surface of infill. The adoption of round type cooling tower infill makes round type cooling tower performance better and take smaller space.
Features:
Light weight, high strength, good flame retardant performance, anti-corrosion, advanced design, small ventilation resistance, good hydrophilic, large contact area etc.
Specification:
1.oxygen index > 40;
2. Height: 200 mm, 225 mm, 240 mm, 300 mm, 340 mm, 350 mm.
3. Sheet Space: 18 mm
4. Infill Thickness: 0.2-0.6 ± 0.05 mm
5. Applicable Temperature:55?~-35?
Port: Shenzhen
Payment: TT, L/C, West Union
Color: Blue
Lead Time: 10 working days
Features:
1. Frame
Designed by using chains structure, the frame is stable and with good rigidity. The load is evenly distributed among each foundation, which makes operation more smooth. All structure parts are processed by hot assault zinc and has excellent performance of anti-rust and anti-corrosion.
2. Glass fiber reinforced plastics
Using good quality surface sizing, upr and glass fiber as raw materials, with standardized abrasive tools for production, glass fiber reinforced plastics surface is glossy, evenly colored, aging resistance, fastcolours and durable.
3. Motor
Totally closed cooling tower's exclusive motor, protection level ip54, good sealing, which is suitable for running in damp and hot environment with low noise and long lifetime.
4. Fan
Wide blade, raked space twisted, low rotate speed and aluminum alloy axial fan, which is low rotate speed, large air quantity, low noise in operation and good dynamic balance etc., its angle is adjustable, which suits customers' requirements on air quantity and noise etc. Aspects very well
5. In fill
Made of good p. V. C plain film that is processed through hot water heating and compression, which makes cooling tower's reducing gear run smoothly with low noise and lifetime longer.
NWQ series cooling towers have crosswind and sideward structure, which have exclusive advantages compared to other cooling towers.
Features:
1. High efficiency and low water drift
This series cooling towers using high efficiency and energy saving fan that makes energy consumption decrease highly, additionally, by using proper water to steam ratio and high efficiency heat dissipation fill film, there is evenly designed cellular air deflector structure before and behind the fill, which makes air in and out of the cooling tower more even and smooth, the cooling effect is guaranteed perfectly, also makes water drift rate lowest(less than 0.01% of the total amount of water).
2. Corrosion resistant and long lifetime
NWQ cooling tower's has reasonable structure that is strong and durable. All accessories are well climate adaption and good corrosion resistant such as chassis, air bellow, side plate are all made of good quality FRP material, all steel parts are processed through heat influx zinc, which improves the capability of corrosion resistant largely and prolongs its lifetime.
3. Low noise
NWQ cooling tower making use of high efficiency, hyperstatic and wide blade axial fan, which lower the noise level to the largest extent while running, meanwhile, it guarantees the air quantity that a certain cooling effect needs.
Model Nominal flow
(m3/h)
28° C Fan Dia.
(mm) Motor
(kw) Overall Dimension
(mm) Weight
(kg) Water
pressure
(Kpa) Noise
(DB/A)
L W H Net
weight Run.
weight
NWQ-8 8 600 0.37 1220 850 1380 90 260 20 63
NWQ-10 10 600 0.55 1220 850 1380 110 350 24 63
NWQ-15 15 730 0.55 1680 1130 1180 165 400 26 64
NWQ-20 20 730 0.75 1770 1130 1180 260 500 26 64
NWQ-25 25 730 0.75 1770 1130 1500 290 700 30 64
NWQ-30 30 890 1.5 2000 1330 1830 300 780 30 65
NWQ-40 40 1150 1.5 2000 1600 1900 450 1000 33 65
NWQ-75 75 1500 2.2 3100 1620 2900 650 1650 35 66
NWQ-100 100 1500 2.2 3260 1750 2900 750 1850 35 66
NWQ-125 125 1500 3 3260 1750 2900 800 200 40 67
Inlet water temp. T1=37° C , Outlet water temp. T2=32° C, Wet bulb temp. TWB=27° C, Dry bulb temp. TDB=31.8° C
Cooling tower fan
Material: abs, aluminum alloy and frp
Usage: cooling tower spare parts
Diameter: 500 mm to 5000mm
Bore diameter: 28 to 75 mm
Material: abs, aluminium, frp
Warranty: one year
Aluminium fan bore diameter: 28 to 75 mm
Trademark: newin
Origin: china
Cooling method: counter flow or cross flow
Condition: new
Fan diameter: 500 to 5000 mm
Usage: cooling tower
Package: 20/40/40hq container with loose packing
Hs code: 84195000
The efficiency of a cooling tower depends upon its fill, the fill is made of rigid pvc or pp film of flame retardant quality with high heat exchange efficiency.
The high efficiency fill reduces the motor input hp and assures uniform distribution of water, with minimum resistance to air flow.
Below roll fillings is applied to newin brand counter flow round type & square type cooling towers, block/sheet fillings is applied to cross flow square type cooling towers.
Material: pvc or pp or upvc
Thickness: 0.35 mm
Usage: for refrigerate
Specification: cti
Hs code: 84195000
Cooling method: counter flow
Condition: new
Temperature: -20 deg c to 50/65/95 degc
Trademark: newin
We have several types of drift eliminator to meet different cooling towers' requirements.
1.Material: pvc
2.Reasonble price --order by pcs or by set, we couls install well in the factory
3. Fast delivery--- within 5 days after received payment
4. Hight quality
Model no.: drift eliminator
Material: pvc
Condition: new
Usage: cooling tower
Trademark: newin
Cooling method: counter flow or cross flow
Certification: sgs, cti
Warranty: one year
Application: replace for cooling tower
Specification: cti
Hs code: 84195000
Water pump sepcial for cooling tower
Output power: 0.18 to 30kw
Power supply: produced by customers' requirements
Type: totally fulled water proof
Protection: ip55
Insulation class: f
Model no.: water pump
Structure: single-stage pump
Power: electric
Type: blade pump
Usage: cooling tower
Trademark: newin
Origin: china
Material: cast iron
Assembly: pipeline pump
Start up: start pump
Warranty: one year
Feature: waterproof
Specification: ce, gb
Original motor, speed reducer, belts, fan blades, infill for spx(marley) cooling tower.
Model no.: spx cooling tower
Ventilation mode: mixing ventilation
Air contact form: wet and dry
Tower shape: round or square
Application fields: industrial
Condition: new
Place of origin: marley china factory
Cooling capacity: all model of spx cooling tower
Package: wood packing
Origin: china
Cooling method: counter flow or cross flow
Material: steel, stainless steel
Air contact way: open
Noise level: ultra low
Certification: iso, ul, ce, sgs, cti
Useage: replace for marley cooling tower
Warranty: one year
Trademark: newin
Specification: cti
Overview
Marley h3 cast aluminum alloy fans are standard equipment on various marley product lines. All h3 fan assemblies incorporate machined aluminum hubs with stainless steel hardware. All h3 fans blades are adjustable in pitch, to take full advantage of rated horsepower or to compensate for unusual job site restrictions.
Features
Marley h3 cast aluminum alloy fans are standard equipment on various marley product lines. All h3 fan assemblies incorporate machined aluminum hubs with stainless steel hardware. All h3 fans blades are adjustable in pitch, to take full advantage of rated horsepower or to compensate for unusual job site restrictions.
A true airfoil blade, designed specifically for cooling towers offering efficient quiet operation and long service life. Available in 54" through 216" fan diameters.
Model no.: h3 fan
Material: aluminum alloy
Method of process: cast
Cooling method: counter flow or cross flow
Certification: iso, ce, sgs
Numbers of baldes: 8
Brand: marley
Overview
The marley softork™ mc close coupling is a flexible element, tire type coupling designed specifically for cooling tower applications.
Features
The marley softork™ mc close coupling is a flexible element, tire type coupling designed specifically for cooling tower applications. Couplilngs consist of two cast ductile-iron, electro-galvanized hubs and clamp rings with stainless steel fasteners. The softork coupling has outstanding vibration dampening characteristics. The shock load cushioning is ideal for variable frequency drive applications and has a high degree of flexibility to accommodate misalignment.
Model no.: coupling.
Cooling method: counter flow or cross flow.
Material: metal.
Certification: ce, iso, sgs.
Overview
The marley® integral sprag clutch backstop is custom designed and configured specifically for a marley geareducer® . Also referred to as a sprag clutch anti-rotation device, these units are designed to prevent reverse rotation of the fan, geareducer and motor.
Features
The marley® integral sprag clutch backstop is custom designed and configured specifically for a marley geareducer® with input shaft diameters of 2.375" and 2.625". Also referred to as a sprag clutch anti-rotation device, these units are designed to prevent reverse rotation of the fan, geareducer and motor. Designed specifically for use with the current 32.2, 3400 and 4000 geareducer models, they can also be utilized to fit legacy 32.1t, 34.3t, 34.4, 36 and 38 geareducer models.
When operating, the outer race is stationary and the inner race is rotating. When facing the input shaft of the geareducer, the forward (over-running) direction is clockwise.
In contrast to conventional sprag clutch devices which may continuously wear, this device utilizes a "lift-off" sprag functionality which alleviates the wear issue once typical rotation speeds are reached.
This feature greatly diminishes the friction and heat generated, thus promoting longevity for both the clutch unit and the geareducer itself.
Model no.: sprag clutch backstop.
Lkz exhaust fan featured with low noise, eletric saving, large air flow, easy installation, which is an ideal choice for sunstroke provention and ventilation in occasions such as varius warehouses, office , flower greenhouse and poltry houses. The product is used to transport non-flammadble, low-corrosive gas with the temperature no higher than 70c, relative humiddity no greater than 90% and the quality of dust and solid impurititres not more than 150mg/m3.
Model no.: lkz6a.
Electric current type: ac.
Certification: ce, sgs, ccc.
Power: 0.55kw.
Diameter: 500mm.
Noise: =68db.
Weight: 15kg.
Specification: ce, gb.
Hs code: 84195000.
Blade material: stainless steel.
Mounting: wall fan.
Air flow: 17000m³/h.
Speed: 500r/m.
Voltage: 220/380/415/440/460v.
Dimension: 600*350mm.
Trademark: lkz.
.
"S" wave counter flow type cooling tower fills are the most widely used cooling tower fills. Due to its big space design, and S wave shape, The fills have excellent cooling efficiency and good performance in processing the dirty water, especially the processing water contains solid impurities. The "S" wave cooling tower infills made by PVC/PP material, thermal forming by mold and plastic forming machine. Sheet thickness and color can be customized. All these advantages makes its become the ideal infill for counter flow industrial cooling tower, Power plant heave duty cooling tower, NH3 plant cooling tower, sewage treatment cooling tower and so on.
Features
light weight, strength, good flame retardant performance, corrosion resistance, advanced design, ventilation resistance is small, strong hydrophilicity, large contact area, etc
Specification
Dimension: 500x1000 mm, 500x1220mm, 500x750mm 500xany
Sheet space: 25mm / 35mm
Sheet thickness: 0.3-0.4 mm, customerization
Applicable water temperature: 75? ~ -35?
Applicant: counter flow square type cooling tower, Power plant cooling tower fills, NH3 plant cooling tower fills, Industrial cooling tower fills
Advantages of Newin Film Fill Media
1. Excellent performance, Film type high cooling efficiency fills media, corrugated shape make water surface is bigger. Packing in 2 ~ 5 layer, between layers there is a hot water redistributed process.
2.Good hydrophilicity, ventilation resistance small surface is rough and the smooth plane packing good hydrophilicity, water bibulous rate is less than 0.015%, make more form a thin film of water, but not splash down, the water and air are more fully contact with the water and air at the same time on the surface flow disturbance.Packing after assembly into the surface wind is a honeycomb diverter, have good uniform wind effect, improve the intensity of heat exchange and stabilize the moisture. 30 ° inclination at the wind inlet direction, effectively reduces the floating water loss. Set up in the end of the packing is according to the impact separation process design of water cleaner, making the drift loss controlled within one over one hundred thousand.
Features
Light weight, strength, good flame retardant performance, corrosion resistance, advanced design, ventilation resistance is small, strong hydrophilicity, large contact area, etc
Specification
Dimension: 500*1000mmbr 500*1200mm 500*1550mm 500*1800mm 500*2000mm 500*2500mm
Sheet space: 25-30-33 mm
Sheet thickness: 0.33-0.40 mm, customerization
Applicable water temperature: 75? ~ -35?
Applicant: counter flow square type cooling tower
Port: shenzhen, china
Payment: tt, l/c, west union
Color: blue
Lead time: 10 working days
Features
Light weight, strength, good flame retardant performance, corrosion resistance, advanced design, ventilation resistance is small, strong hydrophilicity, large contact area, etc
Specification
Dimension: 680x1100mm
Sheet space: 30 mm
Sheet thickness: 0.3-0.35 mm, customerization
Applicable water temperature: 75? ~ -35?
Applicant: counter flow square type cooling tower