FAL aluminum honeycomb panel is a new kind of aluminum composite panel and we adopt advanced continuous high-temperature compounding technology instead of traditional handmade producing method to produce this product.
The surface of the FAL aluminum honeycomb panel is made of aluminum alloy sheets roller coated with PVDF while in the middle is an aluminum honeycomb which meets the international standards.
The structural honeycomb core provides strength and consistent rigidity at a very low density; when bonded to similarly lightweight facings. Every honeycomb cell wall acts like the web of an I-Beam, forming an extremely strong and rigid lightweight composite panel.
It is all made of aluminum which makes it extremely light in weight and environmentally friendly. And it is an ideal material for a most of applications in architecture, transport, display or industrial production.
Standard Specifications:
Length: within 10000mm
Width: 1220mm or 1500mm
Thickness:6.0mm,10mm,15mm,20mm,25mm
(For special requirements beyond these standard specifications, we can discuss and decide with customer.)
Surface treatment: PVDF/PE/Powder coating
Shape & Color: As per project design/customers' request
Structural Characteristics:
1.Strictly controlled quality updated fore-rolling coating with pre-baking finish process.
2.Surface finish: PVDF coating/ PE coating (options for color)
3.Large dimensional panels (Max 5000mm x 1500mm)
4.High strength no reinforcement measure necessary.
5.Precise dimension and roller-pressing technology, which ensure the high quality of the products.
6.Perfect installation system, which can eliminate the panel distortion caused by the temperature changes. Therefore, the sealing against the gas or water leakages will be ensured. The unique sealing installation system looks graceful in shape. Besides, it can effectively avoid the reduction of the lifetime of the sealing glues due to the direct radiation. Furthermore, the lower installation requirements will allow the panels to be installed on various keels.
7.Excellent productive capability irregular panels such as arc-shaped, folded and trapezoid panels will be designed and produced as per the special designing requirements. The non-plane irregular panels including arc shape, L-shape, U-shape are formed in one mould.
8.No color difference: The same lot roller-coated aluminum sheets are to be used for one project. Meanwhile the reasonable interior wall and ceiling installation will ensure each panel sheet to be easily and separately dismantled for maintenance service.
Application: Building Curtain Wall Cladding, Indoor & Outdoor Decoration, Signboard, Partition and Display Platform.
Fal brand aluminum honeycomb panel is a new kind of composite panel which is produced with advanced continous high-temperature compouding technology introudced from german alhigerman. It is mainly composited of three parts: front aluminum sheet, central aluminum honeycomb core and back aluminum sheet.
Product characteristics:
1. Low density, high intensity, high rigidity, stable structure
2. Outstanding flatness, superior weather-proof, wind-proof and pressing proof functions.
3.Good sound&heat insulation, good at shock-resistance
4.Easy to proccess and shape, easy to install
5.Green and enviornmetal, energy-saving material
Product specification:
Standard panel thickness: 6mm, 10mm, 15mm, 20mm, 25mm (1mm for skin aluminum sheet)
Size: 1220 x 2440mm / 1500 x 3000mm(other size can be discussed with customers)
Finish: pvdf coating(pe coating/mill finish is also available )
Color: as per customers' requirement
Application:
Bulilding curtain wall/façade/cladding, interior ceiling, partition wall, advertisement&signage board, container house, bodywork of commercial transportaion vehicle and container truck etc.
"fal" aluminum honeycomb panel is all made of aluminum.Therefore, it is recyclable and good for environmental protection. It is quite light in weight and high in intensity. It can be widely used for building, for those super high and super big buildings in some special regions which need high wind-pressing intensity.It can also meet requirements for large lattice of some buildings. This product also has good flatness and is good for processing.
Aluminum honeycomb plate integrates comprehensive good points of aluminum single plate and aluminum plastic plate, meanwhile, it overcomes the bad points of aluminum single plate and aluminum plastic plate. Therefore, it has been appraised as the best building curtain wall high-tech material in 21st century.
'fal' pvdf aluminum panel is fabricated with quality aluminum alloy material from global well-known s, and coated with pvdf baking paint of ppg or akzo. Pvdf aluminum panel is comprised of cover panel, stiffeners and hangers.
General thinkness
2.0mm 2.5mm 3.0mm
Properties of pvdf aluminum panel
1 light weight, good rigidity and strength.
2 non-flammable, good fire resistance.
3 excellent weather resistance of surface, excellent uv resistance, superior resistance to acids and alkali. Shelf life is 15 years without discoloration under normal outdoor environment.
4 good formability, it can be formed to plane, arc, and complicated shape such as sphere and tower.
5 hard-to-stain, eas to clean and maintain.
6 wide range of colors optional, ecellent decoration effect.
7 easy to recycle, no pollution.
Application of pvdf aluminum panel
Building curtain wall, pillar, balcony, partition board, interior decoration, billboard, vehicle, furniture, exhibition booth, instrument enclosure, metro, shipping vehicle.
Fal brand pvdf aluminum panels are manufactured with superior quality aluminum alloy material from internationally well-known suppliers. And it is coated with a pvdf baking paint of ppg, akzo or becker.
Product characteristics:
1. Light weight, good rigidity and strength
2. Non-flammable, good fire restistance
3.Exellent uv resistance, excellent weather resistance of surface, superior resistance to acid and alkali. Shelf life is 15 years without discoloration under normal outdoor environment.
4.Good formability, can be formed to plane, arc and complicated shape, such as sphere and tower.
5.Hard-to-stain, easy to clean and maintain
6.Wide range of color optional, excellent decoration effect
7. Easy to recycle, no pollution
Product specification:
Standard thickness: 2mm, 2.5mm, 3.0mm
Size: as per drawing offered by customer
Finish: pvdf coating (pe/powder coating is also available
Color: as per customers' requirement
Product processing:
Cutting and loading - edge punching and hole punching - forming(rolling, bending) - welding - nail planting - mounting stiffener and corner connection - gringding - inspect
Spraying painting process
1) as per aama2605-98 stipulated by american architecture manufacture association.
2) pretreatment of aluminum and aluminum alloy:
Degrease?alkaline etch?roughen(pickling)?chromizing?baking
3) pvdf spray painting: work piece loading?primer painting?top coat painting?finish painting?curing?work piece unloading?inspection?packing
Application:
Building curtain wall, ceiling, roofing, pillar, balcony, partition board, vehicle, exhibition booth, instrument enclosure, metro, shipping vechicle etc.
Moq: 1000 square meter(trial order/sample order is also welcomed)
Payment terms: lc or tt(30% deposit, 70% balance before shipment)
Lead time:30 day
'fal' aluminum corrugated panel is an improved sandwich panel that uses corrugated core instead of aluminum honeycomb core, so it is much lighter and slimmer than the aluminum honeycomb panel. It is fully composed of aluminum, 100% environmentally friendly and a2 grade fire resistant. It has the feature of easy fabrication like aluminum composite panel. Additionally, the perfect surface presentation can be shown as a stone-like, wood-like or mirror surface.
Specification of aluminum corrugated panel:
Length:within 10000mm
Width:1220mm or 1500mm
Thickness:4mm, 6mm, 8mm
Special requirements beyond these can be discussed.
Model
modelThickness(mm)Front sheet thickness(mm)Back sheet thickness(mm)
Fh-06 6.0 1.0 0.5
Fh-10 10.0 1.0 0.5
Fh-15 15.0 1.0 1.0
Fh-20 20.0 1.0 1.0
Fh-25 25.0 1.0 1.0
Surface treatment: imitation wood/stone grain
Length:within 10000mm
Width:1220mm or 1500mm
Thickness:6.0mm, 10mm, 15mm, 20mm, 25mm
For special requirement beyond these standard specificaions, we can discuss and decide with customer.
