Beer can filling-capping 2-1 machine is a filling capping 2 in 1 machine designed combined with the actual situation in our country after the introduction and absorption.
It adopts isobaric filling principle and filling valve adopts high precision mechanical valve. It has advantages of fast filling speed, high precision in liquid level and realizing that it only starts to filling when there is a can, otherwise it will stop filling. Using the device structure of filling valve precover device plus supporting can bottom device, it can guarantee the maximum stability of cans when they passing in and out of the filling machine. Filling cylinder braces use worm-gear box going up and down to satisfy cans of different height. Float switches in the filling cylinder ensure a smooth liquid inlet.
The main transmission adopts gear transmission belt and gear box type exposed drive combination with advantages of high efficiency, low noise and smooth operation. It adopts frequency conversion steeples speed regulation and is controlled by PLC industrial computers. Sealing machine and filling machine are connected by hooks coupling universal coupling to make sure them a same working pace.
Introducing the Germany technology and according to the characteristics of beer production industry, this
machine is designed as the small-size beer filling machine. This machine is of good functions such as
stable operating, full and well rinsing, filling, capping and sterilizing.
There are six main parts of this machine:
Bottle rinser
Filler
Capping machine
Working table
Bottle conveyor
Pipe system/Liquid transport pipe
Bottle rinsing part: 6 nozzles
This part is made up of lifting device, the main transmission device, the fixed frame, clamp device, distributor, and open clamp cams and over turn cams etc.
After capping and inspection, the cans should be dried with our drying machine. Before labeling, the cans should pass three suits of our special wind knives, for which the wind origins from whirlpool pump. The whirlpool generates pressure wind, and becomes high speed wind curtain through the wind knife mouth, and then the wind blows the cans up and down till dry. Therefore it is more convenient for the labeling and packing. In this way, this machine solves the problem that the can body carries water, and confirms that the can is dry before labeling.
HG-CGFB16/16/6 type beer bottle washing filling capping 3-1 unit machine is a washing filling capping 3 in 1 machine designed combined with the actual situation in our country after the introduction and absorption. It adopts the bottle filling and capping technique of Germany technology. It has been specially used to fill beer.
It adopts isobaric filling principle and filling valve adopts high precision mechanical valve. It has advantages of fast filling speed, high precision in liquid level. Adopt Siemens automatic controlling system, realizing trinity of the machines, and control the washing, filling and capping process and realize that it only starts to filling when there is a bottle, otherwise it will stop filling and no broken bottles. The filling process is cleaner and pure due to it’s twice evacuation of bottles, and more stable because of isobaric filling operation. Using vacuum pump and CO2 preparing pressure to realize a second evacuation ensure no air and bacteria in the bottle, guarantee the filling quality and warranty quality time. Filling cylinder braces use worm-gear box going up and down to satisfy bottles of different height. Float switches in the filling cylinder ensure a smooth liquid inlet. Therefore, this machine is the best ideal choice for beer or beverage factories.
Components:
Bottle dividing part, positioning part, labeling part, closing part and fitting part.
The labeling part also includes labeling head, nose angle adjusting part, conveyor line, case, electricity-control part and operating part.
Technical analysis
When labeling, if the upper and the lower of the bottle are glued at the same time, the label may be wrinkled a little. To make the labeling beautiful, firstly to glue the body label well and then the bottle cap label. So this machine works includes several procedures:
At first, when the bottles enter, divide the bottles and keep some distance between bottles.
Second, as the bottle has taper, so the labeling head should made to be adjusted, thus the label horizontal position can be in order.
Third, when labeling the bottle, the bottle has to be stopped for positioning. That why it needs positioning part.
Forth,after the body label is glued well, let the gluing part fit the bottle cap label well.
HG-TQX-1 model keg washer uses hot alkaline water, hot water, water, sterile water to wash the kegs. After washing it, there is the function of steam sterilization and CO2 injection. This machine is suitable for washing 5-50L plastic and stainless steel keg.
Characteristic
1.We use Siemens control system that is stable and precise. The whole process is finished fully automatically. All the parameters can be adjusted without stopping the machine.
2.This machine is suitable for all kinds of kegs in different size.
3.There is function of CO2 injection that can keep the beer tasty.
4.The hot alkaline water, water, sterile water can be recycled.
5.The washing head can be changed to be suitable for different kind of keg fitting.
6.We use international famous brand part for this machine.
Tunnel Pasteurizer is widely used in beer factory to sterilize the beer with the can or cans. It is also called water spraying type can warming/cooling machine. Different from directly heating type flash sterilizing machine, this series Tunnel Pasteurizer could sterilize liquid product together with its package (glass can or PET can or can). It can kill all bacteria which possible exists in liquid product or package. Liquid product and its package are heated to sterilizing temperature, keep this temperature for a certain time, and then drop temperature to surrounding temperature by spraying cool water onto package.
This machine adopts the patent technology of the isobaric pressure filling. The whole filling process is controlled automatically by SIMENS PLC, which is very easy and stable. You just need to put keg on the filler, and then press the button. The filling work will be finished automatically. The machine is made by excellent SUS304, and all the pipes, connections, pumps are sanitary. Superior quality of corrosion proof, long-life for use. No doubt it is the necessary machine for the brewery.
This machine is used to print the date on the cans. It has the inspector. When cans come here, the inspector will find it, and send a signal to the printer, so it will be print the date on the cans automatically. Its operation is very convenient, and the ink is normal type which can be found everywhere.
Features:
?Equipped with vacuum ink recycle system to reduce the consumption of the ink, small occupation.
?Self-adjust when there's break, to confirm the best printed effect.
?Easy to be operated.
?This machine would print in many different languages.
?Display the product code, batch, etc.
?Bold the characters as much as 9 times.
?It can print 3 lines, numbers and other characters in English version.
Technical parameter
Packing form 2×3,3×4,3×5,3x3,4×5,4×6(According to cans)
Work power three-phase-five- line 220V/50Hz
Working pressure 0.6~0.8Mpa
Machine dimension 14340×1100×2100mm
Speed 1-12pcs/min
Sealing& cutting temperature 190?~230?
Shrink temperature 200?~280?
Material PE
Roll of film width =600mm
Roll of film thickness 0.06~0.12mm
