RF Level Switch
Manufacturer & Exporter of RF Level Switch & RF type Level Switch. Our product range also comprises of Glass Tube Rotameter, Acrylic Body Rotameter and Bypass Rotameter.
We specialize in manufacturing a wide range of RF Type Level Switch that vary from simple, single point, low cost level to specialized & complex level. The RF Level switch operates on the basis of RF absorption. The electronic unit generates a sinusoidal wave, applied to the electrode creating a field around it.
Design Considerations:
RF Type Level Sensors Switch have been designed taking into consideration characteristics and behavior of materials like Solids (in their granular from), Slurries and Liquids. Few important conditions are given below: Coating:
Most materials have a common tendency to accumulate and coat over anything in contact like walls or any other part that protrudes inside the vessel. That happens by natural phenomena and can not be avoided completely.
The Level Sensor must be unaffected by coating and accumulation of material on the sensing element or on side walls.
RF Design:
RF Principle based Level Sensors have been designed based on the considerations discussed and various other aspects.
Flow star RF Level Sensors are highly reliable for use with materials that are conductive or non conductive, granular or slurries, fines to large particles and contaminated or pure liquids at varying temperatures and pressures.
Description:
Flow star RF Level Switch series FERF 200 comprises of two parts, namely a Sensing Probe and an Electronic controller.
The Sensing Probe has two parts, active section and shield section insulated from each other as shown in the diagram.
A dust proof Probe Head is provided to cover the terminals of the Rf signal cable. Meaning hereby, the Probe contains no electronics or any other sensitive element.
The Electronic Controller separately housed in dust proof enclosure designed for outdoor duty and mounted at a convenient location. It contains the entire electronics, etc. and is connected through a coaxial cable to the Sensing Probe.
Functions:
Flow star RF Level Switch Series FERF200 Models work on Rf Principle. Independent but identical low power RF signals equal in frequency, phase, amplitude and wave shape generated in the Electronic Controller are provided to active and shield sections of the Sensing Probe, whereas, the reference ground of electronics is connected to the vessel shell
The signal provided to the shield section is maintained constant by use of a compensating circuit in the Electronic Controller while the signal applied to the active section varies with change of media between probe and the vessel shell/wall
Level Switch
Being a patron focused organization, we are engaged in manufacturing and supplying best grade Level Switch. We manufacture a qualitative range of water meter that is manufactured using premium grades of raw material. It consists of inferential, multi jet, dry type water meter with magnetic drive and vacuum sealed register.
Cable Type Balloon Level Switch
We specialize in providing a range of Cable Type Balloon Level Switch that is appreciated for their optimum quality, durability and easy installation. Being the leaders in the industry, we present Cable Float Level Switches to our clients. They require minimum maintenance and are presented at the best rates in the industry.
Applications:
An Economical, Viable alternative for control in liquid levels
Simple, Rugged & Reliable
Range: up to 5 mtr.
Switch rating: 10-14 AMP@ 230 VAC
Material of Construction PVC suitable for most liquids
Housing: Weatherproof to IP 66/68/ Flameproof - On request
Details Required for Quotation:
Tank height
No of contacts
Level Gauge
We are an ISO 9001:2008 certified company involved in manufacturing, supply and exporter of Level Gauges in India. These are manufactured from state of the art technology and is in high demand from our valued buyers. Uses:
Water Level Gauge
Tank Level Gauge
Oil Level Gauge
Liquid Level Gauges
Manufacturer & Exporter of Side Mounted Magnetic Level Switch. Our product range also comprises of Glass Tube Rotameter, Acrylic Body Rotameter and Bypass Rotameter.
We have been widely appreciated by the esteemed customers for our ability to offer a quality range of Side Mounted Magnetic Level Switch. The range is widespread and meets various industry applications catering to all type of operating conditions. The switches can have miniature floats, vertical or horizontal mounting operating in single and multiple liquid levels.
Applications:
High / Low level Alarm
Automatic Pump/Valve control
Elimination of tank over flow
Enhances pump safety against dry running
Features:
Temperature: 0-3000C
Pressure: 20 KG/CM2
MOC: SS-304, SS-316, SS-316L, PP
Details Required For Quotation:
Nozzle Size On Which You Are Intending To Mount The Switch
Material Of Construction Of Wetted Parts
Service
Specific Gravity
Operating Pressure
Operating Temperature
Flange Details
Housing Enclosure (Flame Proof/ Weather Proof)
Flowmeter
We are a leading name in this domain engaged in manufacturing and supplying a broad array of Flow Meter. These are fabricated using finest grade material and innovative technology, our products are acknowledged for their sturdy construction, convenient operation, easy maintenance and elongated service life. Our components for the product are procured from some of the most reliable vendors so as to provide our clients with best-in-class-products.
Electromagnetic FlowmeterWe are manufacturing, exporting and supplying a comprehensive range of Electro Magnetic Flow Meter or Electromagnetic Flowmeter, which is used for electrical measurement of flow rate. The performance of the instrument is not affected by the properties of the material such as corrosiveness, viscosity, density, acidity and alkalinity.
Description :
Flow Star series FEMAG are micro-controller based full bore type electromagnetic flow transmitter specially used for various industrial applications
These flow transmitters accurately measures the flow rate of conductive liquids & slurries in closed pipes
Due to simple & rigid design the flow transmitter is an obstruction less & maintenance free instrument in place of conventional mechanical flow measuring device
The use of 'Pulsed DC' technology offers highest ability & better measuring accuracy in the form of electrical signal 4 - 20 ma DC linearly proportional to volumetric flow
The instrument is based on Faraday's law of electro-magnetic induction. A magnetic field is generated by the instrument in the flow tube The fluid flowing through this magnetic field generates a voltage that is proportional to the flow velocity. Corresponding electrical output is provided with respect to measuring voltage
Salient Features :
Indication through LED / LCD
Full Bore type
Microprocessor based
Simple & cost effective construction
Provides wide flow ranges
Outstanding accuracy
Operates over wide ranges of temperature & pressure
Easy maintenance as no moving parts
Pulsed DC coil excitation
Flame-proof, IP-65, IIA, IIB CMRI certified housing
Couplings & Gaskets
Vessels
In most of glass plants, vessels are used as reactors, receivers, separators and measuring of feed vessels.Vessels are available in spherical shape from 5 to 200 litre and in cylindrical shape from 5 to 300 litre capacity. Cylindrical vessels can be supplied with metal/glass jackets also.All vessels are provided with a bottom outlet for which a suitable valve can be selected from range of valves.
SIGHT Glass
Sight glass is a device used between any kind of non transparent pipelines to observe the flow of liquid. This can be used both in horizontal as well as vertical pipeline. Sight glass is constructed in such a way that it gives a complete view from every angle. A sight glass consists of one glass pipe section, one metal frame, a pair of PTFE bushes and washers and an acrylic cover. Borosilicate pipe section is highly heat resistant, has excellent chemical resistance and has low thermal expansion. Metal frame is composed of two flanges, which are welded with studs so that the stresses and vibrations of the pipeline do not transfer to the glass pipe section. Its check nut keeps the glass pipe section in compression and provides ease in replacement.
PTFE bushes on both sides of glass pipe section that liquid ensures that liquid in the pipeline does not come in contact with metal frame. PTFE washers are used as gaskets while fitting the sight glass in the pipeline. Acrylic cover covers the glass pipe section and protects it from outer damages. Sight glass can be supplied with Ms/SS304/SS316 frame with any standard drilling.
Pipeline Components
Borosilicate glass pipeline offer many advantages for its use in chemical, pharmaceutical and drug industries because of its following characteristics.
Inert to almost all chemicals hence no risk of contamination and no Unwanted flavours or colours are imparted into product.
Transparency allows visual monitoring of the process, flow patterns colour changes etc.
Almost universal resistance to corrosion. A long service life is guaranteed
Smooth surface permits easy cleaning and prevents fouling.
All the components are suitable for operation under full vacuum conditions
A variety of stirrers and stirrer drives are available to use glass vessels as agitated reaction equipment.
Heat Exchangers (Coil Type)
The overall heat transfer coefficiency of Borosilicate glass equipment compare favourably with many alternative materials because of its smooth surface which improve the film coefficient and reduce the tendency of fouling.
Heat exchangers are avilable in two basic types: coil type and shell & tube type. Shell & tube type heat exchangers are of recent development.
Heat Exchangers - Shell And Tube Type
The overall heat transfer coefficiency of Borosilicate glass equipment compare favourably with many alternative materials because of its smooth surface which improve the film coefficient and reduce the tendency of fouling.
Heat exchangers are avilable in two basic types: coil type and shell & tube type. Shell & tube type heat exchangers are of recent development.
PTFE Parts
Manufacturer & Exporter of Displacer Type Level Switch. Our product range also comprises of Glass Tube Rotameter, Acrylic Body Rotameter and Bypass Rotameter. Our organization is instrumental in offering a gamut of Displacer Type Level Switch. Our range is custom engineered in several specifications as specified by our clients. Displacer Type Level Switch is based on buoyancy principle. It is used for controlling the liquid level in underground & overhead tanks.
Specifications :
Application: Wat water, Furnace Oil, Lube Oil Chemical, Solve etc.
Protection: Weather proof IP 65/Ex-Proof IIA & IIB
Out Put: Relay contacts
Switch Rating: 5 Amps 230v Ac
Pressure: 20kg/Cm2
Temp. : 150 C
Conn. : 3"(Min.) Flanged or Screwed
Details Require for Quotation :
Height Of The Tank Or Probe Length Required
No. Of Points To Be Controlled With Respect To Top Flange
Material Of Construction Of Wetted Parts
Top Nozzle Detail Which Is Welded On Tank On Which You Are In-tenting To Mount Level Switch
Housing Enclosure (Flame Proof/ Weather Proof)
Top Mounted Magnetic Level Switch
Manufacturer & Exporter of Top Mounted Magnetic Level Switch. Our product range also comprises of Glass Tube Rotameter, Acrylic Body Rotameter and Bypass Rotameter. Top Mounted Magnetic level Switch or liquid level switch moves up and down on probe immersed in a liquid. The float energizes the hermetically sealed sensors, which change from NO to NC or otherwise as the float - passes them.
Details Require for Quotation :
Height Of The Tank Or Probe Length Required
No. Of Points To Be Controlled With Respect To Top Flange
Material Of Construction Of Wetted Parts
Top Nozzle Detail Which Is Welded On Tank On Which You Are Intenting To Mount Level Switch
Housing Enclosure (Flame Proof/ Weather Proof)
Features :
Standard Range: 200 mm to 2000 mm
Temperature: Upto 200 C
Pressure: Upto 20Kg/cm2
Moc: ss 304, SS 316, SS 316L, PP
Connection: Flange End/Screwed Or To Mention
Manufacturer & Exporter of Metal Tube Rotameter. Our product range also comprises of Glass Tube Rotameter, Acrylic Body Rotameter and Bypass Rotameter.
With our expertise, we are able to put forth a wide range of Metal Tube Rota Meter, which is perfect for applications of high pressure, temperature and corrosive conditions. The differential pressure across the annulus area is constant and the flow rate is measured as a function of the annulus area created by float position.
Operating principles :
The essential Working part is a tapered tube with an embedded magnetic float
When flow occurs, the position of the float responds to flow driving a follower magnet outside the meter body, with no physical contact the meter works well with liquids gases even at elevated pressure and temperatures.
FSD Series :
Dial type read out
Straight flow design
No bends, no seals, no threaded joints
Direct reading scale
Compact, economical design
Perfect safety
Applications :
Process treatment plant manufactures use this meter due to its ease of installation, perfect safety and easy maintenance.
It may be used for monitoring flow of De-mineralized Water, Gases, Acid, Salts, Organic Solvents and most petroleum product.
Meter Body SS 316l, SS 316, SS 304 etc
Float SS 316L, SS 316, PTFE etc
Indicator Housing ABS. Optional-Aluminum, SS-304
Temperature Rating 250 C
Pressure Rating 40 Bar
Accuracy +- 2 % Of Full scale
Accessories
Electronic transmitter with (steam jacket) 4-20m a O/P
Accessories Digital flowrate indicator totaliser
Accessories Hi- Low Flow switch
Acrylic Body ManometerOur customers can avail from us a wide range of Acrylic Body Manometer. We are reputed for the Acrylic Body Manometer that are offered in aluminum casing from three sides with see through acrylic front. Owing to their modern and user friendly features, these are widely used in various Schools, Colleges, Laboratories and other places.
Acrylic Body ManometerAcrylic Body Manometer is defined as a force per unit area - and the most accurate way to measure low air pressure is to balance a column of liquid known weight against it and measure the height of the liquid column so balanced. The unit of measure commonly used are mm hg/inches hg using mercury as the fluid, and mm wc/inches wc using water or oil as the fluid.
Features :
The unit of measure commonly used are mm hg /inches hg using mercury as the fluid mm wc / inches wc using water or oil as the fluid.
Electronic Digital Liquid Level Indicator
Manufacturer & Exporter of Electronic Digital Liquid Level Indicator & Digital Level Indicator. Our product range also comprises of Glass Tube Rotameter, Acrylic Body Rotameter and Bypass Rotameter.
Digital Level IndicatorWe are supplier & exporter a range of Electronic Digital Liquid Level Indicator which indicates and controls the level of water accurately. Offered range of indicators is manufactured under the guidance of qualified and enthusiastic professionals who work in close bonds to come up with a durable range. Sturdy unbreakable mechanical loss of head indicators is also present in this equipment.
Applications:
Ideal level management system for
Industrial water - DM, Dl, water plants, utilities
Oils-fuel, Lubricating, edible, cosmetics
Dyes and chemicals
Breweries, distilleries
Pharmaceutical, solvent extraction food processing dairy plants
Some features are:
Low maintenance
Resistance against corrosion
High tensile strength
Robust construction
Level Indicator
We are a profound name of the organization engaged in delivering a compact array of Level Indicator. Products that we offer are manufactured by making use of prime grade raw material along with technologically sophisticated machines and tools. Besides, patrons can avail this range in various sizes, patterns and designs along with various customization options. This indicator is a safe and dependable method to measure levels of toxic liquids, solvents, corrosive acids, vegetable oils, liquid gases, fuel oils, and others.
Tubular Level Indicator
We are counted amongst renowned manufacturers & exporters of Tubular Level Indicator. These are designed by our team of experts using latest technology in accordance with the market requirement. Our Tubular Level Indicators are used in various industries due to their vast features & technical specifications. Our products are highly appreciated by our esteemed clients due to their quality material.
Simple Operation:
When the liquid level rise in the tank, the liquid also rise inside the glass tube carrying a graduated Scale. The liquid level in the tank can be conveniently read against the scale
Specifications:
Glass Tube: Borosilicate
Glass OD: 16 mm, 19 mm, 22 mm
Material of All Wetted Parts: MS, SS 304, SS 316, SS 316 L, PP, PTFE
Gland Packing: PTFE
Glass Protector: MS Powder Coated, SS, PP
Scale: Aluminium, SS, Acrylic, Beckilite
Mounting: Side, Rear, Bottom & Top
Rated Temp: 150° C
Rated Pressure: 10 kg/cm²
Vent & Drain: Plug, Valve
Connection: Flanged, Screw
Details Required for Quotation:
Centre to centre distance
Material of construction
Connection detail
Operating pressure & temperature
Column Components Measurement & Controls
Column Components
In many operations like reaction, extraction and absorption, the transparency of glass is a particular advantage. For such processes a range of column components are available in borosilicate glass which offers many advantages like :
Inert to almost all chemicals hence no risk of contamination.
Transparency allows visual monitoring of the process, flow patterns, colour changes etc.
Almost universal resistance to corrosion
Smooth surface permits easy cleaning and prevents fouling.
Measurement & Controls
In this part we have introduced equipment for efficient measure and control like Digital temperature indicators and controllers, Electro-magnet and timers for reflux control and Liquid level controller.
Glass plant and pipeline should be supported correctly. To prevent inducing undesirable stresses stresses in the glass, support should be rigid. When supported, glass should be in compression. Generally glass plant and equipment are supported in a rectangular tubular structure. This structure is formed of galvanized mild steel tubing with the cast iron fittings, which are described in this catalogue. This type of structure provides enough flexibility for future modifications and is strong enough to support a glass unit. Following rules should be followed while supporting a glass unit in a tubular structure.
The structure be rigid. To give lateral support it must be braced back to the nearest wall or any rigid feature.
All glass columns are build up from a fixed point on which whole weight of the column should be taken. If total loads exceeds the permissible limits, counter balance supports should be used to relieve excessive weight.
With change in temperature, glass column and tubular structure expands at different rate. Therefore glass unit must be free for vertical movement above the fixed point. Hence above the fixed point guide supports should be used to give lateral support.
Structure Tubes, Galvanised
For forming the structure "B" class galvanised tubes are used in size of ½",1", 1¼", 1½", and 2. Cut tubes are available in required length to form a standard size structure. Cut tubes are provided with rubber plug at both the ends.
Heating Mantle
Glass Tube Rotameter
Manufacturer & Exporter of Glass Tube Rotameter. Our product range also comprises of Acrylic Body Rotameter and Bypass Rotameter. Our organization holds expertise in manufacturing and supplying premium quality Glass Tube Rota Meter. We carry out the manufacturing process of these Rota Meter by making use of the supreme quality steel under the supervision of professional. This equipment is made of qualitative range of boro silicate glass using the latest technology.
Features :
Flow Star Glass Tube Rota meters are unique design for industrial usage high precision tapered borosilicate glass tubes are utilized for best performances.
Special design features eliminate stresses on glass tube even under industrial handling conditions. Glass Tube are field replicate without disturbing end connection
By Pass Rotameters
Manufacturer & Exporter of Bypass Rotameter. Our product range also comprises of Glass Tube Rotameter, Acrylic Body Rotameter. By- Pass Rotameter systems are designed for the accurate measurement of fluid rate of flow in pipelines 25 NB in diameter. They accomplished this by providing a bypass flow that is directly proportional to the main flow. Since Rota meter measure bypass flow, not static differential, flow ranges up to 10 to l are possible with these instruments.
System - A complete bypass Rotameter installation consists of the following :
Orifice flanges with orifice plate for insertion into the main pipeline
Bypass piping with valves and fittings; a range orifice for insertion into the bypass pipeline
What ever type Rotameter is considered best suited to a particular application
Suitable to measure the Flow in above
Specifications :
Type of tapping: Flange, D and D/2, corner
Accuracy: +/-2% of full flow
Range ability: 7:1 or 5:1
50NB Line
Standard ISO 5167
Size Design Standard: ISO 5167 or BS/1042
BS/1042
Accessories :
High & Low Flow switches
4-20 ma Transmitter
Being a client focused organization, we are instrumental in offering a commendable array of Rota Meter. Our products are widely used in Pharmaceutical, Chemical, Dyes & Pigments, Research and Educational Institutes all over India. Superior grade raw material is used in manufacturing of these products in accordance with the tastes and preferences of the clients. Prior to dispatch, we check these instruments so as to ensure their resistance against corrosion, fine finish, elegant look and strong construction.
We are a quality focused organization engaged in offering a broad assembly of Rotameter or Glass tube rotameter, which is basically a variable area flow meter. Glass Tube Rota Meter, which is basically a variable area flow meter
Some of the specifications are as follows :
Standard Range: 200 mm to 2000 mm
Temperature: Upto 200 C
Pressure: Upto 20Kg/cm2
Moc: ss 304, SS 316, SS 316L, PP
Connection: Flange End/Screwed Or To Mention
Level Transmitter
With wide expertise in this domain, we have come up with a wide array of Level Transmitter. To ensure the higher level of patron satisfaction, we provide these RF Level Transmitter in accordance to their given specifications. The product helps in easy measurement of liquids in open and huge tanks.
Capacitance Level Transmitter
A Capacitance Level Transmitter is formed between the probe and the vessel wall and the level of the measuring medium rises or falls, capacitance between the probe and vessel wall changes proportionately in a right manner. Our prestigious clients & customers can avail from us a wide range of Capacitance Level Transmitter from us.
Description:
Flowstar Series FECTX-100 are capacitance type level transmitters. The probe is based on properties of capacitor. Vessel wall & probe forms two electrodes. If vessel is of non conductive material, the probe will be double rod type. The distance between electrode & surface area of electrodes remain unchanged. The variable is the depth of the material being measured which represents the dielectric constant between two electrodes. Air & vacuum have relative dielectric constant as 1 & that of liquids, it is greater than 1. The capacitance of the capacitor the therefore depends on how much material lies between the probe & vessel wall i.e. whether the probe is covered with or free from material. The capacitor changes with change in level of the material & provides corresponding 4-20 mA DC continuous output
Salient Features:
2 wire system
Continuous 4-20 mA DC output
Simple low cost & reliable
Trouble free operation for conductive / non conductive
Liquids, slurries
Flameproof IP-65, P-65, IIA IIB, CMRI Certificate housing
A wide variety of valves are described in this section. All the valves are made of Borosilicate glass body and PTFE plugs so that process fluid comes into the contact of glass and PTFE only. Borosilicate glass body permits the visual checking of the operation.
All the valves are suitable for operation under full vacuum conditions and a maximum temperature of 200ºC
Temperature Sensor
Manufacturer & Exporter of Temperature Sensor. Our product range also comprises of Glass Tube Rotameter, Acrylic Body Rotameter and Bypass Rotameter.
Our organization holds expertise in manufacturing and supplying premium quality Temperature Sensor. The range comprises of thermocouple and RTD sensors. Each of these sensors is known for its efficiency and accurate results.
Thermocouples Sensors:
While manufacturing, their style is determined on different parameters such as:
Sheath material
Lead lengths
Sensor material and others
Diameters
Lengths
Features:
Response time
Accuracy
The junction of the thermocouple can be grounded, ungrounded or exposed
Lead length may vary depending on the distance of the temperature controller from the thermocouple sensor.
RTD Sensors:
These are developed from stainless steel, platinum and are available in configuration of 2 or 3 wires. These Sensors are used in Air conditioning and refrigeration servicing, Food service processing, Textile production, Microelectronics