Purpose:
This production line is mainly used for liquid dispensing or vial 2-50ml freeze-drying production, to be completed cleaning, sterilizing, filling, half or full tamponade, capping functions.
Features:
1. Linear arrangement, it is easy to operate, observe, debug, repair.
2. Linkage control line, simple operation, low labor.
3. Intermittent spraying water, servo system, PLC and HMI control, high automation.
4. Using high quality electric component, and control cabinet is separated with machine, the interference do not exists between electric component, it can run normally in high humidity environment.
Main technical parameters:
This line includes washing machine, tunnel machine, filling machine and capping machine
applicable standard 2ml ~ 50ml
production capacity of 200 bottles ~ 400 bottles / min
bottle clarity: more than 99.9%
bottle breakage rate less than 0.1%
sterilization temperature 320 degree Centigrade
heat distribution plus-minus 5 degree Centigrade
installed capacity plus-minus 1%
gasser passing rate of 99%
total power 100KW (heating power 64KW)
wooden case
Working principle:
Plastic sheet (PVC, PVC / PE) is rolled and become suppository shells by the system positive pressure blow in the molding process. In the filling process, stir medicine liquid is filled into shell by high-precision metering pump. Then it will be cut, after a period of low temperature, to achieve solid suppository, by shaping, sealing, print number and cutting processes, finished suppository products.
Feature:
1. Adopt plug-in filling, accuracy position, no drop, high measurement accuracy.
2. Wide adaptability, viscosity liquid can be filled, such as gelatin matrix.
3. PLC programmable control and industrial human-machine interface operation, with a high degree of automation, easy adjustment, high control accuracy and reliability, smooth running characteristics.
4. Big capacity barrel, with a constant temperature, stirring and liquid level automatic control devices.
5. Adding medicine liquid with low position, it reduces labor intensity. With a fluid in circles and pipe insulation, ensure stop machine, the liquid is not solidified.
6. Operation in single side, good vision.
M-SFM model main technical parameters:
1. Yield: 6000-10000 grains /h
2. Single particle dose: 1-5g /grain (also making special specifications)
3. Dose tolerance: 2%
4. Suppositories Shape: bullet, torpedo, duckbill type and other special shapes
5. Adaptation base: semi-synthetic glycerides of fatty acids, glycerinated gelatin, polyethylene glycol, etc.
6. The reservoir bucket capacity: 50L
7. Packing height: 1400mm
8. Power supply: 380V, three-phase, AC
9. Total power: 13KW
10. Air pressure: 0.6MPa
11. Air consumption: 1.5m3 / min
12. Water: 1000 kg / h (reusable)
13. Dimensions: 7000 x 1500 x 1700mm (L x W x H)
14. Weight: 2000kg
wooden case
Detail:
This series of products is designed and produced by advanced technology, and also by user&161175;s requests. By mechanical compulsory pulsation, it exhausts over 98% of the cold air in the vacuum, making sterilization highly effective. With temperature rising evenly fast, sterilization is completed within the shortest time. For different requirement, different temperature can be chosen to satisfy your sterilization requirement.
Characteristic:
1. Rectangle main structure with inner tube, high-quality stainless steel for the interior room, strict quality and safety standard.
2. Power-driven door with interlock, safe, reliable and easy to operate
3. Lasting and durable sealed circle of silicon rubber, it is able to bear high temperature
4. Liquid-circulated vacuum pump to exhaust indoor air compulsively, making sterilization complete, dry and effective
5. Main components adopt famous brands, it is reliable and safe
6. Whole process of sterilization automatically with reliable high-performance, automatic record of the parameter
7. Multi-purposed, space-saving, ease to install, easy to operate
8. No noise or damage made when moving on the floor.
Main Technical Parameter:
ModelM-PVS60M-PV240M-PV360M-PV600M-PV1000
Volume60 L240L360L600L1000L
Cavity materialSUS304
Design press0.26 MPa
Working press0.22 MPa
Design temperature150&161227;C150&161227;C150&161227;C150&161227;C150&161227;C
Working temperature121-134&161227;C
Temperature uniformity&161220161192;0.5&161227;C
Max. vacuum-0.09MPa
Door typeSingle/double
Voltage/frequency380V/50Hz
Water sourcePure water
special Stainless steel cartageselectable
Steam generatorselectableselectableselectableselectableselectable
Soft water deviceselectable
wooden case
Application:
Filling oral liquid production with glass bottles.
Feature:
This production line consists of vertical (ultrasonic) washing machine, hot air circulation tunnel oven, high-speed filling and capping machine and other equipment. It is suitable for round or shoulder abnormity production. Washing, sterilization, filling, capping and other processes can be completed. The production line meets the requirements of GMP, with stable production, high yield, easy operation and maintenance, low running costs. Production line adopts PLC systems, photoelectric sensors in the line prevent squeeze bottles, broken bottles.
Main technical parameter:
Production capacity: 150 to 300 bottles / min
Applicable specifications: 30-150ml
Production qualified rate: big or equal 99%
Power: 380V/50Hz
Total power: 50KW
Dimensions: 12000mm x 3000mm x 2500mm
wooden case
Detail:
Quality report of tap water is necessary, and we can adjust the
configuration the machine exactly. Normally, the machine include raw
water tank, raw water pump, plate heat exchanger, sand filter, active
carbon filter, precise filter,No.1 high pressure pump,No.1 RO membranes,
middle water tank,No.2 No.2 high pressure pump,No.2 RO membrane,
pure water tank, pure water pump, precise filter, cleaning tank, cleaning
pump, metering pump, metering bucket and control system.You can add
EDI for high quality pure water.
Feature:
High automation, operation is simple
With the auto washing function when the machine start, and the RO film
will have long life.
With water quality on-line detection function, you can know water
quality at any time
Fully automatic flushing, and water full stop function
The United States RO and multistage stainless steel pump
Main Technical Parameter:
M-PWM500 500 <10us/cm 380V/50Hz 1.5KW 1800x620x1600
M-PWM1000 1000 <10us/cm 380V/50Hz 2.2KW 2000x800x1650
M-PWM2000 2000 <10us/cm 380V/50Hz 3.0KW 2500x800x1650
M-PWM3000 3000 <10us/cm 380V/50Hz 5.0KW 2800x900x1700
M-PWM5000 5000 <10us/cm 380V/50Hz 8.5KW 3500x1500x2200
M-PWM8000 8000 <10us/cm 380V/50Hz 15.0KW According to the scene
M-PWM10000 10000 <10us/cm 380V/50Hz 20.0KW According to the scene
wooden case
