Product Description
- Applicable for insulating tape, sleeving and fabric
- Silane sizing or Paraffin sizing
Characteristics
- Consistent Linear Density
- Good Sizing Protection and Low Fuzz
- High Filament Tensile Strength
Storage
This Product should be stored in dry, cool, clean and rain-proof area. Recommended temperature range of storage is between 10-30 and relative humidity between 50%-70%.
Carbon fiber modification on engine hood,empennage, surrounding surface, car handle, rotary plate, ect,. is the desire of car fans. Car fans are bothered by this problem any more after the carbon fiber vinyl come out as its price is lower and easy to operate
Model : K9291, K9292, K9293, K9296, K9297
Material
Size : 127cm × 50M
Fabric : 0.09mm
Glue : 30µ
paper : 140g.
Chopped Strand Mat
Fiberglass Chopped Strand Mats are non-woven fabrics consisting of randomly distributed chopped strands held together with a powder or emulsion binder.
Chopped Strand Mat is compatible with unsaturated polyester, vinyl ester, epoxy and phenolic resins. The products are most widely used in hand lay-up process and can also be used in filament winding, Compression molding and continuous laminating processes. The typical end-use applications include various panels, boats, FRP roof shoot, Autonitive parts, bathroom equipment and cooling towers.
Product Features
1.Uniform density ensures consistent fiberglass content and mechanical properties of the composites products.
2.Uniform powder distribution ensures good mat integrity, little loose fibers and small roll diameter.
3.Excellent flexibility ensures good moldability with no spring-back at sharp corners.
4.Fast and consistent wet-out speed resins and rapid air release reduce resin consumption, improving manufacturing costs, productivity and mechanical properties of the end products.
5.The composite products have high dry and wet tensile strength and good transparency.
General Data
Binding type : Powder or Emulsion;
Densily : 85-900g/m2;
Width : Max.3300mm, Tapes available.
Edge : 1 or 2 untrimmed edge available upon request.
Surfacing Tissue
Surfacing Tissue mainly used in the surface layers of FRP products. It features even Fiber distribution, soft feel, level and smooth fiber surface, less glue content, quick resin soak and good pattern fitness. It can improve the product surface property on corrosion resistance, compressive strength, seepage resistance, and longer service life. It is also suitable for spraying; pattern pressing and other FRP pattern technology.
Packaging
Product is manufacture in form of a roll wrap on a paper tube then after packed in a plastic bag and placed with in a cardboard carton. Rolls can be loaded in a container directly or on pallets.
Stroge
Should be stored in dry, cool, clean and rain-proof area. Recommended temperature range of storage is between 10~30 and relative humidity between 50%~75%.
3-D spacer fabric construction is a newly developed concept . The fabric surfaces are strongly connected to each other bv the vertical pile fibers which are interwoven with the skins . Therefore, lhe 3-D spacer fabric can provide good skin-core debonding resistance, excellent durability and superior integrity. In addition, the interstitial space of the construction can be filled up wilh foams to provide synergistic support with vertical piles. These products have broad application prospects in automobile, Iocomotive, aerospace, marine, windmills, building and other industries.
Product Characteristics
The 3-D spacer fabric consists of two bi-directional woven fabric surfaces, which are mechanically connected with vertical woven piles. And two S-shaped piles combine to form a pillar, 8-shaped in the warp direction and 1-shaped in the weft direction.
The 3-D spacer fabric can be made of glass fiber, carbon fiber or basalt fiber. Also their hybrid fabrics can be produced.
The range of the pillar height:3-50 mm, the range of the width:3000 mm.
The designs of structure parameters including the areal density, the height and distribution density of the pillars are flexible.
The 3-D spacer fabric composites can provide high skin-core debonding resistance and impact resistance and impact resistance, light weight. high stiffness, excellent thermal insulation, acoustic damping, and so on.
Fiberglass fabrics in order to meet special purpose or to increase some idiosyncrasy, these fabrics can be treated in various ways. With different temperature resistance and special properties, they are applied in a wide range of different work condition and industrial fields.
Product rangeKevlar / Twaron Ballistic Fabric
Kevlar / Twaron Ballistic Fabric for making bulletproof jackets, helmets,
plates, etc.:
product number, BFF-K01
- Specification : 1.20 by 2.42M; 1.60 by 3.20M; or length 100M+
- Area Density : 225g/m2
- Ballistic Layers for NIJ IIIA : 24
- Mini order : 100 sq.m; sample is available and charged.
- Capacity : 10 kilo sq.m monthly
Kevlar / aramid ballistic fabric is softer and more comfortable than UHMW-PE, but it is weaker on UV resistant, low moisture sensibility and not waterproof.
Guarantee Period : the material are in 5 years warranty.
Note : the material can be preserved under temperature 300 centigrade.
You Chang brand Alkali-resistant fiberglass mesh fabric is basis of any heat insulation system.Cracks are prevented because of good chemical corrosion resistance and high warp and weft strength~Distortions insulation system from high impact are minimized because the directions.
Application
1. You Chang Alkali-Resistant Fiberglass Mesh is widely used in wall reinforcement,out-side wall heat insulation,roof waterproof,wall corner.
2. It can also reinforce cement,plastic,bitumen,plaster,marble,mosaic etc
3. It is an ideal engineering material in construction
You Chang brand geogrids are composed of fiberglass or polyester yarn coated with Bitmen,PVC,SBR.These products possess the properties of high tensile strength in the warp and weft directions,low elongation,excellent temperature range,and good anti-aging and alkali-resistance.
Compared to traditional use of fiberglass geogrids can reduce construction costs,extend road service life,and prevent deflection cracks.They can also be used to reinforce roadbeds in soft soil for railways,and water dams. Geogrids woven by Dornier Weaving machines,coated with PVC.
Application
1. Roadbed reinforcement of road and railway,crack prevention,increase of roadbed strengthinsulation,roof waterproof,wall corner.
2. Reinforcement and stabilization of riverside,embankment and side slope
3. Reinforcement roadbed in soft soil for railways and water dams.
4. Reinforcement of the surface of road and bridge.
Silica cloth is a high performance textile fabric that has 96% SiO2, flexible fabric designed for use where severe temperature conditions exist.
It used for thermal insulating and heat protection. It will not burn, rot or deteriorate and resist most acids. It will keep good state when it works at 1100 for a long time. It works at 1400 more than 15 minutes and works at 1700 more than 15 seconds.
Application
1. Used for heat preservation and thermal insulating.
2. Welding/cutting, molten metal splash protection.
3. Heat and flame shielding, stress relief.
4. Hose and cable protection and emergency fire blankets
Descriptions : Silica fiberglass tape is made of YC fiberglass fabric. It will keep good state when it works at 1100. It’s good construction that offers specific advantages over woven tapes in certain applications.
Apprications : Used in ovens, furnaces and boilers as a door seal and thermal insulating. Used in outside of pipe, such as steam conduit.
Sepcification : Thickness 0.6mm, 1.6mm Width 50mm
Weld preheating
- Using the new ACME - type A Thermal Insulation blanket
- Guarantee the accuracy of the preheating temperature
- Preheating temperature 150
