Brass Tubes For Sanitary Fittings :
Product application Areas :
Plumbing
Characteristics :
A Copper and Zinc Alloy containing small amount of Arsenic. This is added as an inhibitor against dezincification. The alloy exhibits a good combination of strength and ductility and is commonly selected whenever excellent cold working properties, bright finish and relatively low cost are desirable. Severe environment must be considered to predict corrosion behaviour. The alloy is often used for variety of deep drawn components.
Aluminium Brass Tubes :
Standard: BS, ASTM, DIN, NFA, JIS and IS.
Product Application Area : Power Plants, Desalination Plants, Ship Building & Ship Repair, Heat Exchangers and Radiators, Refineries, Offshore Oil rigs, Condensers, Evaporators, Ferrules and Distillers.
Characteristics : A Copper Zinc Alloy containing Aluminium and small amount of Arsenic which is added as an inhibitor against dezincification. Inhibited Aluminium Brass resists the action of high velocity salt and brackish water and is commonly used for condenser tube. The outstanding characteristic of Aluminium Brass is the high resistance to impingement attack. Tubes of this alloy are recommended for use in marine and land power stations where cooling water velocities are high and where inhibited admiralty brass has failed from impingement. Guide to the selection of tube material: Sea Water: a. Dissolved salts more than 2000 ppm.b. Suspended solids more than 30 ppm.c. H2S or Ammonia is less that 1 ppm.Permissible average velocity of water 2.0 - 2.5 metres/sec.
Brass Tubes For Agriculture Equipments :
Product application Areas :
Hand Pumps, Bore Hole Tubes. bo
Characteristics :
A Copper and Zinc Alloy containing small amount of Arsenic. This is added as an inhibitor against dezincification. The alloy exhibits a good combination of strength and ductility and is commonly selected whenever excellent cold working properties, bright finish and relatively low cost are desirable. Severe environment must be considered to predict corrosion behaviour. The alloy is often used for variety of deep drawn components.
Brass Tubes For General Engineering Purpose :
Product application Areas :
General Engineering and Ammunition
Characteristics :
A Copper and Zinc Alloy containing small amount of Arsenic. This is added as an inhibitor against dezincification. The alloy exhibits a good combination of strength and ductility and is commonly selected whenever excellent cold working properties, bright finish and relatively low cost are desirable. Severe environment must be considered to predict corrosion behaviour. The alloy is often used for variety of deep drawn components.
Brass Tubes For Furniture & Lightning Fixtures :
Product application Areas :
Furniture and Architectural Grill Work
Characteristics :
A Copper and Zinc Alloy containing small amount of Arsenic. This is added as an inhibitor against dezincification. The alloy exhibits a good combination of strength and ductility and is commonly selected whenever excellent cold working properties, bright finish and relatively low cost are desirable. Severe environment must be considered to predict corrosion behaviour. The alloy is often used for variety of deep drawn components.
Arsenic Brass Tubes For Sugar Industries :
Product application Areas :
Sugar Industry
Characteristics :
A Copper and Zinc Alloy containing small amount of Arsenic. This is added as an inhibitor against dezincification. The alloy exhibits a good combination of strength and ductility and is commonly selected whenever excellent cold working properties, bright finish and relatively low cost are desirable. Severe environment must be considered to predict corrosion behaviour. The alloy is often used for variety of deep drawn components.
Copper Fittings :
We manufacture a wide range of copper fittings that can be utilized in many applications at home or commercial applications. These fittings are highly durable and resistant to rust. It is also recyclable and hence does not harm the environment in any way . It is also very compatible for carrying water, hence, ideal for fittings in plumbing.
Some of the properties of our products are as follows
Copper & Copper Alloy Products
Chemical Composition
DHP Copper
Phosphorus - 0.015 to 0.035%
Copper - Balance
DLP Copper
Phosphorus - 0.05 to 0.012%
Copper - Balance
Temper
H, HH, 1/4H, O (soft annealed), OL (light annealed)
To meet global competition and international quality standards,we have established stricter quality specifications on our products. The tubes conform to specification for Chemical composition, Temper, Tolerance and Cleanliness, meeting the stringent CFC Free'' (Eco-friendly) applications
Our female fittings are manufactured with parallel threads while male fittings are produced with taper threads. Listed below is the dimensional tolerance of our fittings.
Tripod :
We offer a wide gamut of imported copper fittings that are used with copper headers for joints. These copper fittings are available in a variety of sizes and shapes for meeting the diverse requirements of air-conditioners. Compliant to set industrial standards, these fittings are also quality tested at our end in order to provide a flawless range to the clients.
We provide a wide range of imported Copper Tripod, which are used in cooling coils of different air conditioners. We deal in superior quality tripods in different sizes and shapes.
Copper End Caps :
Copper end caps has heat welding, quick, convenient and connection strength. It is also 100% of raw materials to produce products, not mixed with calcium carbonate and other miscellaneous materials to ensure product quality. This product has a welding stability, easy installation, long service life.
The product has special features like flexibility, low-value rigidity, corrosion resistance. It has good elasticity and high pressure. It is of high quality with beautiful appearance and smooth surface.
It is widely used in air conditioners, bathroom fittings, water tubes and so on.
LWC (level wound coil) :
Categories : plain and IGT (inner grooved tube)
Copper Coils :
Incredible gaugecontrol
More concentric andconsistent tube
Bigger/virtuallydefect-free coils
Improved tubesurface
Higher yields
The above benefitsascertain superior quality tubes for a superior quality end product, more tubefootage per kilogram, reduced tooling problems, reduced chance of costlyleakages, increased productivity and fast manufacturing setup times.
Copper Elbow :
An elbow is a type of plumbing or piping fitting intended to join a piece of pipe and another fitting at an angle. When we have to change the direction of the pipe, copper elbows comes handy which have a close radius to fit in the tightest possible space.
Copper Coupling :
Copper Couplings are used to attach two identical size tubes together. We also provide customized copper Coupling as per client's drawing and requirement in no stop, rolled stop and dimpled tube stop type.
Copper U-Bends :
Copper U Bends provides a 180 turn in a much smaller space and is used to facilitate the return flow of the coolant. We excel at making both expanded as well as plain u bends for condensers and evaporators. Also available in stainless steel 304 grade.
Copper Fittings solutions made available by us are the best available in the market both in terms of quality and price. These fittings are developed using superior grade copper that make these last long as well as deliver high usage value in given application in air conditioners. These copper fittings are imported from leading manufacturers and are used with copper headers for joining purposes. Further, these can be made available in different sizes and design shapes as per the specific end usage requirements.
Copper Elbow 45 :
The copper 45-degree elbow is used in residential and commercial systems such as potable water, air conditioning and refrigeration. The 45-degree elbow features solder cups. The fitting provides a means of changing the pipe line direction by 45 degrees. In addition to its inherent qualities of beauty, durability and low maintenance, copper’s reuse-ability makes it an ideal application in sustainable projects.
Copper construction
For use with above ground water-supply piping
Changes the direction of piping 45 degrees
Solder connections
Resists dezincification
Meets ANSI B16.22 and ASME specifications
Maximum working pressure of 582 psi
Y Joints :
A reducer is the component in a pipeline that reduces the pipe size from a larger to a smaller bore (inner diameter).
The length of the reduction is usually equal to the average of the larger and smaller pipe diameters. There are two main types of reducer: concentric and eccentric reducers.
Copper Fittings solutions made available by us are the best available in the market both in terms of quality and price. These fittings are developed using superior grade copper that make these last long as well as deliver high usage value
Copper Tee (Equal) :
Tee is a fitting in the shape of a T where the top of it is the continuous pipe run and the vertical section is a branch connected to it. Tees offer multiple options and used in a variety of applications. We offer varieties of Tees multiple dimensions like one end having smaller diameter and cross Tees, which are used to connect four tubes or a threaded Tee when the vertical section of it has female threads.
We are offering our clients, quality Copper Tee. These are Used for refrigerator, water dispenser, air-conditioner, warm ventilation, central air conditioner controls system, building installation. The Tees are used in diverse engineering applications.
Copper Y Reducer :
A reducer is the component in a pipeline that reduces the pipe size from a larger to a smaller bore (inner diameter).
The length of the reduction is usually equal to the average of the larger and smaller pipe diameters. There are two main types of reducer: concentric and eccentric reducers.
Copper Fittings solutions made available by us are the best available in the market both in terms of quality and price. These fittings are developed using superior grade copper that make these last long as well as deliver high usage value
Copper Reducer :
Copper Reducing Sockets are used to attach two pipes of different diameter. We also provide customized Copper Reducers as per clients drawing and requirement.
Made up by using high quality raw material, Copper Reducer Fitting is offered by us to customers. These Copper Reducer Fittings are well known in the international market for its accurate design, high performance and sturdy construction. In addition, they are obtainable at reasonable rates.
Used for heat exchangers, medical gas lines, brass handles, sanitary use etc
Copper Tee (Unequal) :
Copper Tee offers the most varieties of fittings than any other type. It is basically a fitting in the shape of a T. Its top is for the continuous pipe run & the vertical section is to connect the branch. Copper reducing tee do not have equally sized part, used when one end of the section is of smaller diameter.
Copper C Bend :
Copper Fittings solutions made available by us are the best available in the market both in terms of quality and price. These fittings are developed using superior grade copper that make these last long as well as deliver high usage value in given application in air conditioners. These copper fittings are imported from leading manufacturers and are used with copper headers for joining purposes. Further, these can be made available in different sizes and design shapes as per the specific end usage requirements.
Copper Flats :
We provide custom made steel plates for our customers. Stainless steel plates are available in various grades like straight grade, low carbon grade and high carbon grade according to the requirement of our customer.
Copper Rods For General Engineering & Electrical Industries :
Phosphorus deoxidised non arsenical Copper
Fabrication Properties
Capacity for being
Cold workedExcellent
Hot FormedExcellent
Suitability for
BrazingGood
SolderingGood
Immunity to Hydrogen
EmbrittlementExcellent
Uses: House hold & General Purpose.
Physical Properties:
TemperTensile strength Kg/mm2 Min.Elongation % on 5.65 A Min.
Annealed21.533
As Manufactured23.513
Chemical Requirements:
Copper (Incl. Silver)99.85% Min.
Phosphorus0.013 to 0.05%
Total Impurities0.06% Max.
IS 288/ 1981
Arsenical Copper
Fabrication Properties
Capacity for being
Cold workedExcellent
Hot FormedExcellent
Suitability for
BrazingGood
SolderingGood
Immunity to Hydrogen
EmbrittlementExcellent
Uses: Locomotive boiler stay bolts & Rivets, Plates for locomotive fire boxes etc.
Chemical Requirements:
Copper Silver99.2% Min.
Arsenic0.2 to 0.5%
Copper Strips, Rods & Plates For Earthing System :
Solid Copper Earth Rods :
Copper Strips, Plates and Solid Rods are manufactured from highly conductive EC Grade Copper. They offer great resistance to corrosion. They are ideally used in applications where the salt content in the soil is very high.
Size : 16mm - 2Omm (length as per customer specifications).
Swaged Earth Rods (250 Microns) :
Plain Swaged Earth Rods.
Tapered Swaged Earth Rods.
Especially developed for Australian market, available with driving head and coupling.
Driving Heads / Studs / Tips / Dowell Pins
Made from High Tensile Steel to ensure force from power hammer. Dowell Pins are also made from High Grade Brass.
Sizes : 1Omm, 14mm, 5/8, 3/4 etc.
Couplers :
Material : Copper Alloy
Sizes : 14mm, 5/8, 3/4 etc.
Clamps :
Material : Copper Alloy
Sizes : 14mm, 3/8, 5/8, 3/4 etc.
Air Terminal Base :
Material : Body Casted from Brass
Application : Used as a base for fixing Air Terminal
Copper Bonded Earth Rods :
They are manufactured from Structural Quality High Tensile Steel Grade 43A to BS 4360. These rods are molecularly bonded with pure EC Grade Copper (99.9%).
Copper Strips, Bus Bars & Profiles :
We understand the technicalities of working with copper, a softer metal than steel, and one that requires some extra skill in fabricating busbars. With our prototyping capability, we can usually provide samples of busbar, copper busbars and electrical busbar for evaluation. Our copper also finds numerous uses in electrical industries.
Copper Tubes For Marine Applications :
Our industrial copper tubes and copper pipes can be widely utilised in the design of seawater systems for their excellent resistance to corrosion and bio-fouling and many other excellent properties. Copper corrodes at negligible rates in unpolluted air, water, and deaerated non oxidising acids. Copper alloy artefacts have been found in nearly pristine condition after having been buried in the earth for thousands of years, and copper roofing in rural atmospheres has been found to corrode at rates of less than 0.4 mm in 200 years.
Copper Tubes For Heating Application & Solar Panels :
The copper tube we manufacture finds numerous applications in Heating and Solar Panels. For steam-heating systems, especially return lines, the outstanding corrosion resistance and non-rusting characteristics of copper tube assure trouble-free service and maintenance of traps, valves and other devices.
Copper Tubes For Automobile Industries :
The industrial copper tubes and copper pipes that we manufacture for the automobile industry has certain advantages over other metals. Copper had been proved since the early days to have many good attributes. It is easy to bend and has very high corrosion resistance. Copper''s inherent superiority in thermal conductivity, corrosion resistance and strength has made it a preferred primary metal for radiators since the dawn of cars and trucks. Now, with new technologies, it can be used to make smaller, lighter and stronger copper radiators. These radiators will be far more environmentally friendly because they are lead free and easier and cleaner to produce.
Copper Bus Tubes For Electrical Application :
As per B.S. 2871 Part - 2/72 C 101
Near Equivalent specification B.S. 1977/ 63 & (ASTM B - 188-81)
Uses
Copper tube used for gas, heater and hydraulic lines, oil burners, refrigerators, evaporators and heat exchangers.
Hollow (round, square, rectangular and elliptical) electrical conductors in high voltage installation, induction furnaces etc
Copper Tubes For General Engineering :
Copper Tubes, manufactured by us, can also be used for general engineering. In residential buildings and small one and two-storey commercial buildings, the drainage piping is usually straightforward in design and simple in installation. Type DWV copper tube, installed with good workmanship by an experienced plumber, will provide many years of trouble-free service. Copper DWV tube has been used successfully for years in all parts of drainage plumbing systems for high-rise buildings for soil and vent stacks and for soil, waste and vent branches. Copper tube''s lightweight and the ease with which it can be prefabricated have been especially important in high-rise drainage systems.
Copper Tubes For Water And Gas :
Copper Tube to BS EN 1057 - R250 (Previous Designation BS 2871: Part 1: Table X) Half Hard Straight. This products is supplied in 3 or 6 meter straight lengths in the half hard condition, an ideal temper for cold bending and forming. ABC Tubes can be easily bent on an appropriate bending machine for 6 to 22mm O.D. sizes, with a bending spring. Its ease of manipulating and relatively light weight, combine with its ability to withstand high internal pressure makes Mex-flow the ideal products for most hot and cold water, central heating and gas services installations. This is the general-purpose copper tube for above ground services. Ideal for Drinking Water, Central Heating, Sanitation, Hot and Cold Water, industrial Medical Gas Transportation and Various Engineering.
Copper S Bends :
Copper Fittings solutions made available by us are the best available in the market both in terms of quality and price. These fittings are developed using superior grade copper that make these last long as well as deliver high usage value in given application in air conditioners. These copper fittings are imported from leading manufacturers and are used with copper headers for joining purposes.
Further, these can be made available in different sizes and design shapes as per the specific end usage requirements.
Copper Tubes (Air Conditioning Systems And Refrigeration Systems) :
The Copper tubes that we manufacture are extensively used in Air conditioning systems. The use of copper tube in air-conditioning and refrigeration systems has grown steadily in recent years. This is in large measure due to the inherent properties of the copper metals and their unique abilities to meet the needs of the ACR industry. Stringent new requirements, including demands for increased operating efficiency and the reduction or elimination of harmful emissions, have led to a new appreciation for copper tubes role in product enhancement.
Copper Tubes For Heat Exchangers & Locomotives :
We recommend our copper tube for heat exchangers and condensers because copper''s inherent superiority in thermal conductivity, corrosion resistance and strength has made it a preferred primary metal for Heat exchangers(radiators) and condensers since the dawn of cars and trucks.
Cupro Nickel Pancake Coils 95/5, 90/10 & 70/30 :
Copper-nickel brake tubing provides superior reliability and assures both manufacturers and vehicle owners improved durability for effective long-life functioning of the brake system. Coils Available in 5 mtr, 10 mtr & 15mtrs.
Cupro Nickel Tubes 95/5, 90/10 & 70/30 Automobile Industries :
he Move toCopper-Nickel Tubing
Copper had been provedsince the early days to have many good attributes. It was easy to bend and hadvery high corrosion resistance, but there was concern about its lowcorrosion-fatigue strength. When copper-nickel was introduced, it displayedcorrosion resistance similar to copper, higher general strength and betterfatigue strength. Good formability allows ease of flaring and bending, andalthough the metal cost is greater than that of steel alternatives,copper-nickel is very attractive in view of its extra life, trouble-freeinstallation and safety/reliability characteristics.
Properties ofCopper-Nickel Brake Tubing
The copper-nickelalloy used for brake tubing typically contains 10% nickel, with iron andmanganese additions of 1.4% and 0.8% respectively. The product conforms to ASTMB466 (American Society for Testing and Materials), which specifies dimensions,tensile strength and yield strength. Formability and internal cleanlinessconform to specifications SAE J527, ASTM A254 and SMMT C5B (Society of Motor Manufacturersand Traders). Also, the alloy meets the requirements for pressure containment,fabrication and corrosion resistance for ISO 4038 (International StandardsOrganization) and SAE J1047.
The mechanicalproperties of alloy C70600 in comparison with steel and copper are shown inspecification.
Alloy C70600 isnormally supplied as redrawn tubing in the annealed condition. The combinationof strength and good ductility give excellent formability.
As copper-nickel issofter than steel, it was first feared that fretting might be a problem.Experience has shown this is not the case.
Copper-nickel braketubing provides superior reliability and assures both manufacturers and vehicleowners improved durability for effective long-life functioning of the brakesystem.
Cupro Nickel Tubes 95/5, 90/10 & 70/30 Marine Application :
These Cupro Nickel tubes & pipes for Marine application are very important for all Industrial fields. The company has experience in these areas and is able to supply these tubes in accordance with most international standards and special customer requirements.
Stainless Steel :
Coils: As stockist of stainless steel products, we also provide steel coils for various industrial and other usages. They are available in various dimensions as required for the end purpose.
Pipes: Apart from other things, we also provide steel pipes according to the technology like seamless and ERW. They are used in a number of industries like sewage and water and any other use.
Strips: Stainless steel stripes are useful in manufacturing industries where steel strips are required to join hinges. These stripes have also found way in packaging of heavy industries.
Rods: We provide stainless steel rods for construction and reinforcement sites. Stainless steel rods are of the best quality and have the resistance to bear this rod. We have also been providing stainless steel rods to industries like petrochemical industries where they require rods that are not only strong but also rust resistant.
Tubes: We offer stainless steel tubes in variety of requirements like stainless steel tubes and stainless steel pipes as proposed by the clients. The tubes are choices in shapes like, round, oval, rectangular and square tubes. Tubes are also available according to finish and usage.
Stainless Steel :
Coils: As stockist of stainless steel products, we also provide steel coils for various industrial and other usages. They are available in various dimensions as required for the end purpose.
Pipes: Apart from other things, we also provide steel pipes according to the technology like seamless and ERW. They are used in a number of industries like sewage and water and any other use.
Strips: Stainless steel stripes are useful in manufacturing industries where steel strips are required to join hinges. These stripes have also found way in packaging of heavy industries.
Rods: We provide stainless steel rods for construction and reinforcement sites. Stainless steel rods are of the best quality and have the resistance to bear this rod. We have also been providing stainless steel rods to industries like petrochemical industries where they require rods that are not only strong but also rust resistant.
Tubes: We offer stainless steel tubes in variety of requirements like stainless steel tubes and stainless steel pipes as proposed by the clients. The tubes are choices in shapes like, round, oval, rectangular and square tubes. Tubes are also available according to finish and usage.
Stainless Steel Rods :
We provide stainless steel rods for construction and reinforcement sites. Stainless steel rods are of the best quality and have the resistance to bear this rod. We have also been providing stainless steel rods to industries like petrochemical industries where they require rods that are not only strong but also rust resistant.
Steel Med Tubes :
Material :
Solid drawn
Seamless
Deoxidized
Non-arsenical
Half hard
Tempered
Degreased
Conforming to HTM 2022 standards
Specifications :
Fittings used for connecting copper tubing are made of Copper and brazed type
Connection as per BS: 864: Part 2:1983
All pipe-jointing fittings are made of Copper as per BS 864 Standards and suitable for a steam of working pressure of 17 bars and especially made for brazed socket type connections.
Shut off valves suitable for the pipe diameter are of non lubricated 90° turn lever & having stainless steel hard chrome brass body with PTFE seat and S.S. ball.
Sizes will be appropriate for copper pipes with screw threaded ends and brass adapter.All valves are pneumatically tested for twice the working pressure and degreased for medical gas service before supply.
Features :
Cost effective
Convenient
Alarm system for timely detection
Endurance against high pressure
Easy to maintain
