Newest Version English Car DVR Auto DVR for BMW Audi
Features:
Professional 6G imported glass lens, 150 super wide view
AV out :Through delicate line, output CVBS signals directly to GPS hosts;
Support parking monitoring: Shut the ACC,after parking, the DVR will automatically boot when vibration, shut down again.after record video 20s.
Support orbit deviation: no alarm when the car is in the right lane, when the car deviation or press line, vehicle DVR will issue a "beep" sound to alarm the driver for driving safety;
Support automatic video: Switch on the ACC , DVR start work
Built-in G - sensor crash sensors, support Crash sense..
Build-in Motion Detection
Support synchronous recording;
Memory card: support CALASS10 above TF card, maximum 32GB;
Professional Vehicle OBD Diagnostic Scanner Maxiecu MPM COM Autodiag Car Diagnostic Interface
MPM COM interface + MaxiEcu 2 (full version, or you can buy the vehicle brand you need only)
MPM COM interface, designed by the manufacturer of the software, works perfectly with a lot of diagnostic software for lots of vehicles old and new.
Functions:
Fault codes will be shown with all available information
Read fault codes
Clear fault codes
Retrieves vehicle information (VIN, ECU)
Performs actuations and adaptations
Retrieve Real-time Data stream
Perform ECU Coding
Perform ECU Programming
Diesel engine, petrol engine, ABS, EDL, ASR, ESP, AIR-BAG, immobiliser
Instrument cluster, door electronics, steering column electronics, battery control
Vehicle electrical system control unit - BCM, trailer function AHF, Radio-navigation
software: you can download from the official website (buy the activation on official website is supported!
and buy activation from us directly is OK, too! We have wholesale price): http://maxiecu.com/download,
6,en.html
MaxiEcu 2 allows for a diagnosis of the best known brands: Renault, Mercedes, Peugeot, Citroen,
Nissan, Opel, Ford, Fiat, Alfa Romeo, Lancia and more soon (vehicles of the Volkswagen
Audi group).
It can diagnose vehicles to the standard OBD 2, but, unusually, it also works with those that are
incompatible with the standard.
Unlike the simple kit, this pro pack provides access to advanced functions (coding of injectors,
regeneration of the particulate filter, reset maintenance ...).
The MPM COM interface currently is one of the most advanced products in terms of automotive diagnosis.
Not only to be a 32-bit interface made high-quality, is also an interface that is compatible with
A lot of diagnostic software known (see list below). OBDII compatible, it supports
quite old communication protocols (OBD), studied software such as
maxiecu 2, which can support even older vehicles.
It is a product that will allow you to communicate with the Abs, airbags, etc ....
Do not hesitate a moment, this is a product that attracted us.
Advantages:
1.) built-in multiplexer
2.) compatibility with various diagnostic programs
3) reliable construction and software update for free
4.) simple and fast driver installation
5.) amazing speed of data transfer
6.) life-long warranty from factory directly for our distributors
Interface
MPM-COM
ELM 327
Processor
AT91SAM7S
PIC18F2580
Architecture
32 bite
8 bite
Number of operations per second
45million
4million
Flash memory capacity
256 KB
16 KB
Connection speed support
9600 bps to 1 Mbps
9600 bps to 500 Kbps
Custom communication protocols
Support
No support
Full operation of CAN bus
Support
No support
CAN BUS 1 wire protocol (Opel)
Support
No support
Software update
Support
No support
Multiplexer
built-in
none
RX obd-2 buffer capacity
256 B
8 B
Ignition line check
Support
No support
Energy saving mode
Eco Mode
none
As it can be seen above, MPM-COM has features unavailable in ELM 327, which increase the reliability
and availability of the programs connected to the interface.
Software Compatibility:
ELM 327 in compatibility mode:
Maxiecu 2
Scan XL
ScanMaster
Vauxcheck
ScanTool
Easyobd II
DashCommand
Pcm Scan
Compatible with vag kkl::
vag 2.5
vag 4.9
Vag com 4.11
Vag commander 1.4 (line K)
Vag commander 2.5 (line K)
Others:
Carsoft 6.1.4 (BMW)
Inpa (BMW)
vol-fcr (Volvo)
ddt2000 (Renault)
Fiatecuscan (line K)
Maxiecu
technical Specifications
32-bit processor AT91SAM7S
32-bit architecture
Number instructions / s: 45000000
Connection speed up to 1Mbps
Support for non-standard protocols
Full support CAN bus
Latest software update
multiplexer
256 B buffer
USB
Software specifications:
MaxiECU software version 2 "Full"
--multi- languages
--Protocols OBD1 OBD2 +
--ISO15765-4 (CAN)
--ISO14230-4 (KWP2000)
--ISO9141-2
--J1850 VPW
--J1850 PWM
--Compatibility: Windows XP, 2000, Vista, 7 and 8, 8.1 (32 and 64 bit)
--Compatible with USB and BT ELM official version.
If you need the user manual or if you need additional cables for this interface, pls just let us know.
Diagnosis Opel from 1986 to 2010, depending on the vintage and equipment
Diagnosis Ford from 1994 to 2010, depending on the vintage and equipment
Diagnosis Fiat from 1994 to 2010, depending on the vintage and equipment
Diagnosis Alfa Romeo from 1997 to 2010, depending on the vintage and equipment
Diagnosis Lancia from 1998 to 2010, depending on the vintage and equipment
Diagnosis Nissan from 2001 to 2010 depending on the vintage and equipment
Diagnosis Citroen from 1994 to 2010, depending on the vintage and equipment
Diagnosis Peugeot from 1994 to 2010, depending on the vintage and equipment
Diagnosis Renault from 1980 to 2010, depending on the vintage and equipment
Diagnosis Mercedes from 1993 to 2010, depending on the vintage and equipment
Diagnosis Mazda from 1999 to 2010, depending on the vintage and equipment
Diagnosis Audi from 1990 to 2011, depending on the vintage and equipment
Diagnosis Seat from 1990 to 2011, depending on the vintage and equipment
Diagnosis Skoda from 1990 to 2011, depending on the vintage and equipment
Diagnosis Volkswagen since 1990 to 2011, depending on the vintage and equipment ( New! )
Standard packing
New Arrival BMW Inpa K+DCAN With Switch USB Interface For BMW Car from 1998-2008
Why buy BMW Inpa K+DCAN With Switch from us?
1.100% Original Brand New FTDI 232RL Chip,Most of in market from other suppliers use fake FTDI or other chip IC which many function will not be able to apply or very low quality and short life length.
2.We Sell more than 15,000pcs every year,back repair rate is almost "Zero"
3.Use good quality plastic not the bad ones in the market
4.Always stock enough for clients'need
5.Produce this product more than ten years and with our big sales volume,Price is best in china.
6.Can OEM with your new desgin
7.We are first factory in china to make this,a real original product from our factory
8.Life-long warranty directly from our factory.
Function:
BMW INPA K+DCAN With Switch1. Read and delete errors
2. Adaptations
3. Driver programming
4. Applu coding
and others...
Specification:
1. Supports protocols
1) Fast magistral D-CAN and PT-CAN (500 kbit/s)
2) Slow magistral K-CAN (100 kbit/s)
3) Standard BMW protocol (BMW OBD interface).
2. D-CAN for:
1) E60, E61 od 03/2007
2) E83 od 09/2006
3) E81, E87 od 03/2007
4) E90, E91, E92, E93 od 03/2007
5) E70 (new model X5)
6) R56 (new model MINI)
PT-CAN, K-CAN-fully switchable speed of magistral CAN - ou can diagnose driver without any car.
3. Protocol "BMW OBD interface" for older cars:
1) From 1995 to 1998 (don't need K-line).
2) From 1998 to 03/2008 (all models)
OBD2 Diagnostic Scanner For FORD-VCM OBD Auto Diagnostic Cable
Description:
Ford-VCM OBD is professional device for ford vehicles, F0rd-VCM OBD has the most functions of ford vcm ids, it is the mini version of ford vcm ids. Ford-VCM OBD works on ford car by OBD2 port directly.Ford-VCM OBD is diagnostic software for Ford vehicles.
It is designed for ford,mazda,and other few brand cars,really working very well with those cars 1996-2010, some 2011 cars.Ford-VCM OBD is diagnostic programmer for Ford vehicles 1996-2010. It can connect to various electronic control units ( ECUs) and display identification, read and clear fault code memory, display and record measured values and performactuator tests,some key programmer,etc.
Key features:
1. Support for wide range of ECUs and models
2. Easy connection via smart USB to OBD2 interface
3. Wide range of communication protocols and buses covered: 4.J1850 PWM, ISO, CAN
5. Automatic ECU recognition
6. Automatic vehicle scan
7. ECU Identification
8. Fault code (DTC) reading
9. Fault code clearing
10. Measured vaules / live data
11. Live data recording
12. Diagnostic protocol printing
13. Actuator tests
14. Control unit coding
15. PATS Immobilizer operations
16. Flash and serial memory programming
Packing:
1. Ford-VCM OBD interface.
2. CD-ROM with software and drivers
Forscan ELM 327 USB With Switch OBD2 CAN BUS Scanner OBDII Diagnostic Tool
This interface will allow you to realize a diagnosis on vehicles FORD group.
This is the only interfacein the market to be compatible with software like FORSCAN, FOCCCUS diagnostic software specially designed for vehicles of the brand FORD, MAZDA and some which are free.
If you have a FORD, this interface is for you!
Using the switch, so you can access the FORD proprietary networks like CAN HS, MS CAN.
You have a FORD and you do not know if it works on your vehicle. You can visit the official page of FORSCAN.
This interface will show you much more easily and quickly the settings you have selected. FORSCAN associated software, you can access many computers. A list of computers is also available on the official website.
Functions:
Read diagnostic trouble codes, both generic and manufacturer-specific, and display their meaning (over 3000 generic code definitions in the database)
Clear trouble codes and turn off the MIL ("Check Engine" light)
Display current sensor data, including
Engine RPM
Calculated Load Value
Coolant Temperature
Fuel System Status
Vehicle Speed
Short Term Fuel Trim
Long Term Fuel Trim
Intake Manifold Pressure
Timing Advance
Intake Air Temperature
Air Flow Rate
Absolute Throttle Position
Oxygen sensor voltages/associated short term fuel trims
Fuel System status
Fuel Pressure
Many others
Specifications:
Output Protocol: S232 to bluetooth
Frequancy: 38400
Size: 88*46*25
Voltage: 12V
Current: 45mA
Bluetooth: 10M
Supported platform: Andriod, Symbian, Windows Mobile, palm, pc, pocket pc.
Forscan ELM 327 Bluetooth With Switch OBD2 CAN BUS Scanner Wireless Diagnostic Tool
This interface will allow you to realize a diagnosis on vehicles FORD group.
This is the only interfacein the market to be compatible with software like FORSCAN, FOCCCUS diagnostic software specially designed for vehicles of the brand FORD, MAZDA and some which are free.
If you have a FORD, this interface is for you!
Using the switch, so you can access the FORD proprietary networks like CAN HS, MS CAN.
You have a FORD and you do not know if it works on your vehicle. You can visit the official page of FORSCAN.
This interface will show you much more easily and quickly the settings you have selected. FORSCAN associated software, you can access many computers. A list of computers is also available on the official website.
Functions:
Read diagnostic trouble codes, both generic and manufacturer-specific, and display their meaning (over 3000 generic code definitions in the database)
Clear trouble codes and turn off the MIL ("Check Engine" light)
Display current sensor data, including
Engine RPM
Calculated Load Value
Coolant Temperature
Fuel System Status
Vehicle Speed
Short Term Fuel Trim
Long Term Fuel Trim
Intake Manifold Pressure
Timing Advance
Intake Air Temperature
Air Flow Rate
Absolute Throttle Position
Oxygen sensor voltages/associated short term fuel trims
Fuel System status
Fuel Pressure
Many others
Features:
OBD SCAN is the newly developed wireless scan tool. It supports all OBD-II protocols
Automatic
SAE J1850 PWM(41.6Kbaud)
SAE J1850 VPW(10.4Kbaud)
ISO9141-2(5 baud init,10.4Kbaud)
ISO14230-4 KWP(5 baud init,10.4 Kbaud)
ISO14230-4 KWP(fast init,10.4 Kbaud)
ISO15765-4 CAN(11bit ID,500 Kbaud)
ISO15765-4 CAN(29bit ID,500 Kbaud)
ISO15765-4 CAN(11bit ID,250 Kbaud)
ISO15765-4 CAN(29bit ID,250 Kbaud)
A.SAE J1939 CAN(29bit ID,250*Kbaud)
B.USER1 CAN(11*bit ID,125*Kbaud)
C.USER2 CAN(11*bit ID,50*kbaud)
Default settings(user adjustable)
Specification:
Output Protocol: Output Protocol
Frequancy: 8400
Size: 88*46*25
Voltage: 12V
Current: 45mA
Bluetooth: 10M
Supported platform: Andriod, Symbian, Windows Mobile, palm, pc, pocket pc.
ELM 327 USB ( FTDI chip + Power Protection Chips)
Functions:
Read diagnostic trouble codes, both generic and manufacturer-specific, and display their meaning (over 3000 generic code definitions in the database)
Clear trouble codes and turn off the MIL ("Check Engine" light)
Display current sensor data, including
Engine RPM
Calculated Load Value
Coolant Temperature
Fuel System Status
Vehicle Speed
Short Term Fuel Trim
Long Term Fuel Trim
Intake Manifold Pressure
Timing Advance
Intake Air Temperature
Air Flow Rate
Absolute Throttle Position
Oxygen sensor voltages/associated short term fuel trims
Fuel System status
Fuel Pressure
Many others
Features:
OBD SCAN is the newly developed wireless scan tool. It supports all OBD-II protocols
Automatic
SAE J1850 PWM(41.6Kbaud)
SAE J1850 VPW(10.4Kbaud)
ISO9141-2(5 baud init,10.4Kbaud)
ISO14230-4 KWP(5 baud init,10.4 Kbaud)
ISO14230-4 KWP(fast init,10.4 Kbaud)
ISO15765-4 CAN(11bit ID,500 Kbaud)
ISO15765-4 CAN(29bit ID,500 Kbaud)
ISO15765-4 CAN(11bit ID,250 Kbaud)
ISO15765-4 CAN(29bit ID,250 Kbaud)
A.SAE J1939 CAN(29bit ID,250*Kbaud)
B.USER1 CAN(11*bit ID,125*Kbaud)
C.USER2 CAN(11*bit ID,50*kbaud)
Default settings(user adjustable)
Specifications:
Output Protocol: RS232 to bluetooth
Frequancy: 38400
Size: 88*46*25
Voltage: 12V
Current: 45mA
Bluetooth: 10M
Supported platform: Andriod, Symbian, Windows Mobile, palm, pc, pocket pc.
ELM 327 bluetooth OBD2 CAN BUS Scanner OBDII Wireless Diagnostic Tool
Functions:
Read diagnostic trouble codes, both generic and manufacturer specific, and display their meaning (over 3000 generic code definitions in the database)
Clear trouble codes and turn off the MIL ("Check Engine" light)
Display current sensor data, including
Engine RPM
Calculated Load Value
Coolant Temperature
Fuel System Status
Vehicle Speed
Short Term Fuel Trim
Long Term Fuel Trim
Intake Manifold Pressure
Timing Advance
Intake Air Temperature
Air Flow Rate
Absolute Throttle Position
Oxygen sensor voltages/associated short term fuel trims
Fuel System status
Fuel Pressure
Many others
Features:
OBD SCAN is the newly developed wireless scan tool. It supports all OBD-II protocols
Automatic
SAE J1850 PWM(41.6Kbaud)
SAE J1850 VPW(10.4Kbaud)
ISO9141-2(5 baud init,10.4Kbaud)
ISO14230-4 KWP(5 baud init,10.4 Kbaud)
ISO14230-4 KWP(fast init,10.4 Kbaud)
ISO15765-4 CAN(11bit ID,500 Kbaud)
ISO15765-4 CAN(29bit ID,500 Kbaud)
ISO15765-4 CAN(11bit ID,250 Kbaud)
ISO15765-4 CAN(29bit ID,250 Kbaud)
A.SAE J1939 CAN(29bit ID,250*Kbaud)
B.USER1 CAN(11*bit ID,125*Kbaud)
C.USER2 CAN(11*bit ID,50*kbaud)
Default settings(user adjustable)
Specifications:
Output Protocol: RS232 to bluetooth
Frequancy: 38400
Voltage: 12V
Current: 45mA
Bluetooth: 10M
Size: 88*46*2
Supported platform: Andriod, Symbian, Windows Mobile, palm, pc, pocket pc.
Best Car Jump Starter Environmental Adaptability
Why buy car jump starter from us?
1. when the car need emergency start because of battery power shortage, ordinary mobile power can not provide the enough high current car starts;
2. can be used as mobile power electronic devices
3. can be used as LED lights, lighting needs to provide multiple modes
Second, environmental adaptability
Standard Operating Temperature: -20 degrees +60 degrees ----
Optional Ultra-low temperature operating temperature: -40 ---- + 60 degrees
Third, the large-capacity
Standard two kinds of capacity 10000mAh, 12000mAh
Fourth, safe and reliable
Configuring multiple protection circuit to ensure product safety and reliability.
Hot Selling Fiat ECU Scan Adaptors Car ECU Scanner with Best Price
Why Buy diagnostic cables/connectors from us?
We are professional factory for cables. 12 years experience make cables and We offer best price in china.
We always use best quality plastic and other materials,not use bad plasticand cable usage is short and do'nt look decent.
We make all kinds of cables,almost full range of diagnostic cables.
We can make cables as your design and any requirements,any color,any length available.
We can make your own pinout for u for free.
We test every single pc before we send to clients,almost ZERO bad feedback.
we offer plenty cables in short time, thousands pcs can be made in a few days.
We stock plenty to avoid any shortage,not like trade companies,take money first and let clients wait.
A Life-time warranty.
Description:
Fiat Ecu Scan Adaptor Fiat Connector OBD2 16Pin OBD Cable for Fiat Four Colors (4 Pieces/ Set).
We can do any pinout as clients offered .
We can do any design as clients offered.
Specifications:
Type: OBD2 Cable
Applicable Models: Most of branded of cars, OBD Cars
Voltage: 12V
Power: 24W
Certification: CE, SGS
Material: Plastic
Color: Four colors
OEM: Yes
Shipping ways: China post, DHL, UPS, Fedex, TNT, EMS, HongKong post, etc
Package List:
4pcs/set x Fiat Cables
Latest Version OBD Diagnostic Scanner for Opel OP-COM V1.45 with Best Price
Functions:
1. It covers almost all Opel cars, even new cars with CAN-BUS based diagnostic, such as Vectra-C, Astra-H, Zafira-B.
2. The program lets you to read out and clear fault codes, shows you live data, lets you to perform output test, and supports remote, and key programming.
3. The program supports many control units, like Engine, Automatic Transmission, ABS, Airbag, Engine Cooling module, Instrument Cluster, Electronic Climate Control, Body Control Unit, just to name a few examples.
4. Since Opel uses many pin in the OBD connector, the diagnostic interface works as a multiplexer, and selects the appropriate pin for communication. PIN3, PIN7, PIN8, PIN12 = Serial Link (ISO9141, KW81, KW82, KWP2000)
5. Fault codes will be shown with all available information:
Full fault code text description
Full status information (Present, Not present, Intermittent)
6. You can print out, save, or copy the fault codes to any other application.From the fault codes window, you can go directly to the measuring blocks window.
7. The program shows you measuring block information on many control module, you can choose anything from the list on your own.
8. The program is capable of showing 8 measuring block parameter simultaneously. The sample rate is depends mostly on the communication protocol. For example, older system, like Omega-B X 25 DT Engine (ISO-9141-2) can be very slow, during communication, while newer Multec, or Bosch units are faster (using KWP-2000), and the newest CAN based control units are very fast! You can also run output tests on many controllers. PIN6-PIN14 PIN3-PIN11 PIN1 HSCAN - Dual-wire, High Speed CAN-BUS, 500 kbps MSCAN - Dual-wire, Medium Speed CAN-BUS, 95 kbps SWCAN - Single-wire, Low Speed CAN-BUS, 33.3 kbps.
9. You will get a feedback on the state of the activated output. This will helps you to find the failed.components more easily.With DIGIOBD OP-COM, you can learn keys to immobiliser, and remote keys to the central door locking.
10. You can also reset, and program the following immobiliser related items: ECM, BCM, IPC. You will need the vehicle security code, which can be found on the CAR-PASS. You can also reset, and program the Service interval reminder on Astra-G, Zafira, Corsa-C, Meriva You can code SAB6, and SAB8 airbags with the software.
Car cables full 8 pcs / set for Autocom TCS CDP Pro cables obd2 connect adapter
Why Buy diagnostic cables/connectors from us?
We are professional factory for cables. 12 years experience make cables and We offer best price in China.
We always use best quality plastic and other materials, not use bad plasticand cable usage is short and dont look decent.
We make all kinds of cables,almost full range of diagnostic cables.
We can make cables as your design and any requirements,any color, any length available.
We can make your own pinout for u for free.
We test every single pc before we send to clients, almost ZERO bad feedback.
We offer plenty cables in short time,thousands pcs can be made in a few days.
We stock plenty to avoid any shortage,not like trade companies, take money first and let clients wait.
A Life-time warranty.
Description:
The OBDII adapter cable full set for cars is compatible with OBDII diagnostic tools such as the Autocom CDP, TCS CDP Pro, MultiDiag Pro+ and Delphi DS150E diagnostic tools. Also With those cables you can do some .
old cars, such as BENZ 38PIN or BMW 20PIN etc. The set includes a total of 8 car cables.
Package list:
1pc PSA 30P Cable
1pc PSA-2P Cable
1pc Adi 2P+2P Cable
1pc BENZ-38P Cable
1pc BMW 20P Cable
1pc OPEL 10P Cable
1pc FIAT 3P Cable
1pc Power Cable
8 Pieces / Set OBD2 Truck Cables For Autocom CDP Pro Truck Diagnostic Interface Tool
Why Buy diagnostic cables/connectors from us?
We are professional factory for cables. 12 years experience make cables and We offer best price in china.
We always use best quality plastic and other materials,not use bad plastic and cable usage is short and dont look decent
We make all kinds of cables,almost full range of diagnostic cables.
We can make cables as your design and any requirements,any color,any length available.
We can make your own pinout for u for free.
We test every single pc before we send to clients,almost ZERO bad feedback.
we offer plenty cables in short time,thousands pcs can be made in a few days.
We stock plenty to avoid any shortage,not like trade companies,take money first and let clients wait.
A Life-time warranty.
Description:
8 Piece Truck Cables OBD2 Adapter Truck Diagnostic CableThe OBDII adapter cable set for trucks is compatible with Autocom CDP, TCS CDP Pro, MutliDiag Pro+ and Delphi DS150E diagnostic tools. The set includes a total of 8 truck cables.
Packaging list:
7 pin Knorr,Wabco Trailer Cable
12 pin MAN Cable
37 pin MAN Cable
IVECO 30P Cable
SCANIA 16P Cable
MB-14P Cable
Renault 12P Cable
VOLVO 8P Cable
