Caustic soda 99%
1. Cas no.: 1310-73-2
2. Mf: naoh
3. Einecs no.: 215-185-5
4. Hs code: 2815110000
5. Place of origin: china (mainland)
6. Specification:
ComposingFlake 99%Pearl 99%
Naoh (sodium hydroxide)99% min.99% min.
Na2co3 (sodium carbonate)0.4% max.0.3% max.
Nacl (sodium chloride)0.02% max.0.015% max.
Fe2o3 (ferric oxide)0.004% max.0.001% max.
7. Usage:
Used as a raw material in the manufacture of soap, detergent, textiles and paper, in water softening and treatment, refining petroleum products, in sanitation, and hygiene products, and in the food and drug industry, etc.
8. Package: 25kg/bag. 22 mt /20?fcl with pallets, 25 mt/20?fcl without pallets.
9. Storage:
As a class 8 corrosive substances, due to its corrosivity, careful storage and safety in production are needed, such as personnel has to wear protective equipment during the procedure of handling and storage. Keep it in a closed container in a dry warehouse.
Hpmc/hydroxyproyl methyl cellulose for ceramic tile filler
1. Cas no.: 9004-65-3
2. Mf: c12h20o10
3. Einecs no.: 220-971-6
4. Classification: construction adhesive
5. Place of origin: hebei, china (mainland)
6. Main raw material: refined cotton
7. Specification:
ItemIndex
AppearanceWhite or similar white granules or powder
Purity%99
Methoxyl group %19-30
Hydroxyl propyl group %4-12
Gel temperature /â°c58-64â°c
Ph value 5.0-7.5
Viscosity(2% solution, 20â°c) 150000-200000 mpa.S
Particle size 80-180mesh
Water content %3-5
Ash content %3-5
8. Usage:
Specially for ceramic tile filler
9. Package:
25kg/bag. 12 mt /20â??fcl with pallets, 24 mt/40â??fcl with pallets.
10. Storage and shelf life:
2 years under cool, dry conditions in original packaging away from heat sources. It is recommended to use the product in rotation on a first-in first-out basis.
Acid black i 10b
1. Cas no.: 1064-48-8
2. Mf: c22h14n6na2o9s2
3. Einecs no.: 213-903-1
4. H.S. Code :32041200
5. Appearance: black even powder
6. Place of origin: hebei, china (mainland)
7. Specification:
Molecular weight: 616.48
Strength:100% 120%
Water-insoluble impurities: 1.5%max
Moisture%:0.9max
Light fastness: 5
Wash fastness: 4
Sweat fastness: 4
Seawater fastness: 3
8. Usage: used in leather dyeing, febric dyeing like wool, silk and nylon.
9. Package: 25kg/bag or drum. 12mt/20?fcl.
10. Storage: the product must be stored in shade, dry and well-ventilated warehouse, avoid to be contacted with oxidizing chemicals and combustible organic substance. Keep it away from heat, sparks and open flames.
Full automatic gypsum cornice production line
We independent research and development a new set of full automatic gypsum cornice production line in 2015. This equipment will be less investment and quick returns. It is easy to handle with less labor and high output. It will be 4-5 times then man-made output. So it will be the best choice for business investment.
1. Plant area:
Workshop size: 60m*2m*3m total is 120 sq.M
Natural drying place size: 60m*15m*3m total is 900 sq.M
2. Production capacity:
100mm*2400mm gypsum cornice
5 workers
4300 pcs per day (24hours),
1, 300, 000 pcs per year (300days.)
3. Power: 10 kw
4. Patterns: we can supply several normal international standard pattern type and it also can be customized .
Acid black att
1. Cas no.: 167954-13-4
2. Mf: c22h14n6na2o9s2
3. Einecs no.: 213-903-1
4. H.S. Code :32041200
5. Appearance: reddish dark brown powder
6. Place of origin: hebei, china (mainland)
Specification:
Index no.:acid black att 4092
Dry mixture:red brown with metal luster
Wet mixture:black even powder/red powder
Strength:130%, 120%, 110%, 100%
Moisture %:3.0
Water insoluble matter %0.2%
Fineness (residue on 80mesh screen) %1.0
Light fastness:7
Water fastness:4-5
Sweat fastness:5
8. Usage:
Used in leather dyeing, febric dyeing like wool, silk and nylon.
9. Package:
25kg/bag or drum. 12mt/20’fcl.
Hpmc/hydroxyproyl methyl cellulose for wall putty powder
1. Cas no.: 9004-65-3
2. Mf: c12h20o10
3. Einecs no.: 220-971-6
4. Classification: construction adhesive
5. Place of origin: hebei, china (mainland)
6. Main raw material: refined cotton
7. Specification:
ItemIndex
AppearanceWhite or similar white granules or powder
Purity%99
Methoxyl group %19-30
Hydroxyl propyl group %4-12
Gel temperature /â°c58-64â°c
Ph value 5.0-7.5
Viscosity(2% solution, 20â°c) 80000-150000 mpa.S
Particle size 80-180mesh
Water content %3-5
Ash content %3-5
8. Usage:
Specially for wall putty powder .
9. Package:
25kg/bag. 12 mt /20â??fcl with pallets, 24 mt/40â??fcl with pallets.
10. Storage and shelf life:
2 years under cool, dry conditions in original packaging away from heat sources. It is recommended to use the product in rotation on a first-in first-out basis.
We independent research and development a new set of no paper faced gypsum board production line in 2015.It takes us 6 years .This equipment will be less investment and quick returns. It is easy to handle with less labor and highly output.
Our r&d philosophy is more green, more saving and more environmental protection.
Besides all the advantages of traditional paper faced gypsum board, the new no paper faced gypsum board has many itâ??s own characteristics.
Fireproofing grade: the traditional gypsum board fireproofing grade is b, but the new no paper faced gypsum board fireproofing grade is a. Perfect fireproofing material.
Environmental protection: it will save a lot of paper and more effective to protection the tress, the forest.
Production cost: because there is no need to use protection paper, modified starch, white latex, the production cost will be cut off a lot.
Production pass rate: it will be higher than traditional paper faced gypsum board. Because the donâ??t stick paper will be disappeared.
Applied rangeï¼?it will be wider than traditional paper faced gypsum board, special in the often raining places. Because there is no paper, starch and latex, mildew and coating shedding will be not occurred.
Market prospect: because of the characteristics above, it will be the upgrade and update of the traditional paper faced gypsum board. The market prospect is perfect.
In addition, this new machine also can produce cement cladding board, waterproof gypsum board by changing the recipe. After little machine adjusting, it also can produce the perlite composite board.
1(1.5, 2, 3, 4, 5, 6, 8, 10, 12, 15, 20) million square meters per year gypsum board production line
Paper faced gypsum board is a kind of lightweight construction board(made with calcined natural gypsum or outgrowth of chemistry)use the construction gypsum and face paper as the primary raw material, mixed with relevant fiber, modified starch, speed freezemeter, vesicant and water; produced through mixed, molded, froze, incised and dried such working procedure.
Paper faced board is lightweight, fireproofing, soundproof, dampproof, heat insulation, and have a good capability that can be nailed, cut planed, its good for tooling, knocked-down, easy for completion, and can enlarge the space.
Its widely be used in industry construction, civil construction, especially used as crossbanding for interior of high buildings, such as: used for unload wall board and ceiling board.
The gypsum board production line was based on the inland and overseas equipments that have been improved and innovated.
It reached an absolute automatic level in self-mixing, self-molding, self-supplying, self-outputting, self-turning, self-cutting. We can provide different grades (high, medium, low) production line according to the require of customers.
1.Production scale:
10, 000--200, 000 mt/year
2.Raw material:
Content of caso4. 1/2 h2o in gypsum mine 80%
The grade of mine and the crystal configuration will influence the quality of semi-hydrated gypsum
3, working principle
The main working principle for calcining system, of calciner
The main body of calciner consists of fine diameter intensive radiator pipes. Thermal oil fed into the coil pipes. The heat releases into power by heat exchanger. Roots blow installed at bottom of calciner for putting the cooling air into furnace by grid plate. The cooling air blows gypsum power in furnace for reaching boiling state. At certain temperature , the calcined gypsum power will lighten, and flow automatically to outlet. This type gypsum power is state in quality. It is easier to control the content of free water , initial and final setting times.
Moreover, our equipments adopt dry electric precipitator, dust collection efficiency is over 95%.
4, simple structure, durable equipment
The boiler does not need rotary components because the materials has come true fluidization. It simplifies the structure, manufacture and maintenance. In any case, the furnace will not damage since it uses low-temperature heat source. The life span is much longer than normal type.
5, compact, space saving
Calciner is a kind of vertical equipment. The dust collector installed on the top of it as whole body. This design is good at space saving, and avoids moisture condensation on corona lines of dust collector.
