Specification of 2CP5 series pressure sensor (0.5~4.5Vsignal output)
Pressure range!G 0-15psig ~ 0-650psig
Performance!G
Precision: !O 1.2% span (linearity, hysteresis, repeatability, and calibration).
Temperature deviation!G!O0.013%FXC
Operating temperature!G-40FXC to 135FXC
Physical properties!G
Pressure resistance!G5X15-75psi!F3X100-300psi!F2X500+psi!C
Burst pressure!G2CP5 1500 psi (brass)!F2CP50
2500 psi (plated steel)!C
Random vibration!G (50-2000 Hz)!G11g!C
Cycle life!G10M F.S cycle!C
Fall (in either axis)!G1.5m!C
Electrical connection!GNema 4X, IP65!C
Electrical characteristics!G
Power voltage!G4.5 to 5.5 VDC!C
Power current (Max@5.5Vdc no load)!G8 mA max!C
Output load: 10K ohms typical.
Overvoltage protection!G16 VDC!C
Short-circuit protection!GYes!C
EMC (10MHZ-512MHz)!G50 V/m
The output voltage (Vout): 0.5 to 4.5 Vdc t typical.
Output current (maximum decrease or source)!G2.5 mA!C
Output response time!G10 mS!C
Reverse voltage!G14 VDC!C
EMC (512MHz-1GHz)!G25 V/m!C
ESD (CDF-AEC-Q100-002)!G15k V!C
ACM Product Capability
!¡¦ Based on TI ACM patent of active sensitivity skill, the sensor could detect 2 to 5 ppm CO concentration., which is the average CO concentration in the cities of western countries. Normally it is no necessary to detect low concentration of gas in cities. However it is expected to do so in the country sides. ACM would remind ECU the source of smell nearby.
!¡¦ Based on TIACM patent of absolute concentration detect skill, 2 sensors separately exam the absolute concentration of NOx and CO. The advantage is to provide a report of air quality. It also applies to the condition when the gas exists longer time or increases its concentration, to even satisfy the demand of advanced loop circle control strategy.
!¡¦ TI ACM favors customers to develop more advanced loop circle control strategy.
One ballast different lampa fluorescent or compact fluorescent lamps
!E Reduction of inventory costs and flexible processes,since many
ballasts that were suited for only one lamp,will no longer be many
Automation identification of lamps
!E All of these lamps are run optimally according to their specifications
Warm start of lamp possible in every dimming position
!E When switched on, the ballast will start the set light value without
difficulty in every dimming position
!E Especially for lighting systems in cinemas,theaters and concert halls
this function is a major advantage Dimming range up to <1% of light flux
!E Voltare-dependent control enables a change of brightness and effective
energy savings Throughout the entire range of control Control input 1-10V0.25mA
!E By means of a current sink 20mA, about 50 of these ballasts can be
controlled in synchronism Electric strength
!E If supply voltage exceeds 350V, the ballast swutches automatically to the lowest dimmer Position which has internally been fixed
Automatic identification of lamps
All of these lamps are run optimally according to their specifications
Warm start of lamps possible every dimming position
When switched on, the ballast will stare the set light value without
difficulty in every dimming position Especially for lighting systems in
cinemas,theaters and concent halls this function is a major advantage
Dimming range up to <5%of light flux
Voltage-dependent control enables a change of brightness and effective
energy savings throughout the entire range of control
Control input1-10V0.25mA
!E By means of a current sink 20mA, about 50 of these ballasts can be
controlled in synchronism
Electric strength
!E If the supply voltage exceeds 350V, the ballast switches automatically
to the lowest dimmer position which has internally been set
APT Key Features
The sensor design is based on ceramic capacitor structure.
All signal processing circuits are gathered together as one application-specific integrated circuit.
Allowable for a wider temperature range (-40¢FXC to +135¢FXC ).
Allowable pressure range is up to 3,000psi.
Precise assembly process; no further adjustment is required after leaving factory.
Absolute or relative pressure sensor.
A reliable package type especially designed for engine and chassis installation.
Accurate and stable output signal.
Able to fit for all auto pressure liquids.
Able to enhance the temperature output.
APT Operation Principle
