Zfb209 medium -alkali glass fiber cloth description
Glass fiber cloth is compiled by untwisted direct roving with plain weave, is mainly for unsaturated polyester resins , vinyl resins , epoxy and phenolic resins , etc.
Zfb209 medium -alkali glass fiber cloth application
Widely used for hand laying fiberglass products : such as the hull , automobile, airplane , plates, sports and entertainment facilities , fiberglass products, sanitary ware, pipe irrigation , cooling towers and so on.
Zfb209 medium -alkali glass fiber cloth technical parameters
Model code Zfb209
Concluding alkali or not Medium-alkali
Weight(g/m2) 02
Width(mm) 900
Zfb209 medium -alkali glass fiber cloth package
Each volume sets wrap a transparent plastic bag , then put into cartons. If you have special packaging requirements , we can offer in accordance with customer requirements. 1x20 foot container can pack about 10 tons
Non-alkali glass fiber surface mat description
Glass fiber surface mat is mainly used in the surface layer of glass products. Divided into two categories: specific wound type series (s-sm)and hand lay-type series (s-hm)
Non-alkali glass fiber surface mat characteristic
Fiber distribution evenly, finished products with smooth surface, corrosion resistance, low binder content, volt mode is good
Non-alkali glass fiber surface mat application
Wound glass fiber mat is mainly applied to the surface of the pipe and tank wrap products, it can improve product surface corrosion resistance and enhanced compressive strength, anti-leakage and prolong life.
Hand lay glass surface mat is mainly used for hand lay products with complex geometric curve, its volt mode is good, resin penetration speed, can improve the strength and corrosion products.
Non-alkali glass fiber surface mat datasheet
For more information of bmz020#non-alkali glass fiber surface mat, pls feel free to contact amber
Tel: +86-0755-89311348
Mob: +86-18938867544
Skype: amberqu2
Email: hyresin@outlook.Com
Non-alkali glass fiber surface mat shelf life
12-24 months under the room temperature of 25c
Non-alkali glass fiber surface mat packaging
Selling units: Single item
Single package size: 1x1x1 cm
Single gross weight: 1.2 kg
Glass, fiber chopped strand mat characteristics
Weight is evenly distributed per gram, , can be saturated fast, , bubbles easy, to be eliminated, , with high transparency for finished products, excellent coating model, performance, , less, consumption of, resin.
Glass, fiber chopped strand mat application
Mainly used for, tank, winding pipe, products, , the surface layer, of the glass products. Can improve the, surface, corrosion resistance and, enhance the, compressive strength for finished fiber glass products, , prevent leakage, , prolong the service life.
Hand laying up, type glass, fiber mat, is mainly used for, hand laying up, product, with complex geometric curve, , it is with excellent coating model performance, , rapid resin, saturated speed, can, improve the strength and, corrosion resistance performance for finished glass fiber mat products.
Glass, fiber chopped strand mat technical parameters
Model Non-alkali/alkaline Gravity(g/m2) Width¡ê¡§mm)
Wdz150# Non-alkali 150 900-3200
For more information of wdz150# glass, fiber chopped strand mat, pls feel free to contact amber
Tel: +86-0755-89311348
Mob: +86-18938867544
Skype: amberqu2
Email: hyresin@outlook.Com
Email: hyresin(at)outlook¡ê¡§dot¡ê©com
Glass, fiber chopped strand mat packaging
Selling units: Single item
Single package size:, 1x1x1 cm
Single gross weight: 1.2 kg
Polyurethane resin application
1)used in aviation, railways, construction, sports and other aspects;
2)surface varnish for wooden furniture and metal;
3)insulation for storage tanks, pipes, cold storage, beer, fermentation tanks, cold preservation barrels
4)waterproof for building insulation
5)used for prefabricated polyurethane sheet
Ja202# polyurethane resin characteristics
, , ¡ìoagood radiation resistance , yellow resistance and good hardness, it is very suitable for outdoor products
, , ¡ìoagood resistant of uv and aging
, , ¡ìoanon change hardness, not easy broken, no shrinkage and non deformation , and good adhensive , and good sunshine resistance for the long time using
Polyurethane resin package
2kg/set or 10kg/set packing
Polyurethane resin shelf life
Six (6) months when stored under dry and cool place by original package under 25, æ
Package
20kg/drum
220kg/drumpackage
Application of medical grade liquid silicone rubber for shoe insoles
The product is a two component high elongation silicone gel designed for silicone food care products, such as silicone insole.
This product cured at room temperature to a soft track gel with the addition of curing agent. The soft nature and cushioning effect offer this product provides excellent protection for our food health care.
Features of medical grade liquid silicone rubber for shoe insoles
1.Convenient 1:1 mixed ratio by weight
2. High elongation gel
3. Low viscosity easily pourable
4.Room temperature vulcanized and heat acceleration
5. Soft track and selcky gel
6. Absorbs shock and protets delicate mechanical component
7. No creativ by ¡§cproduct, no concerns nogarding corrosion
Q: what are foot relief insoles designed to do?
A: foot relief insoles are fluid filled insoles that have five primary benefits and a long list of secondary benefits. The insoles are designed to cushion, massage, absorb shock, give arch support, and increase circulation. The liquid insole will form to almost any shape foot giving you a customized fit after only a few minutes of wear. Many customers refer to our liquid filled insoles as "liquid orthotics" because of the way the insoles stretch slightly allowing the liquid to fill in the unique arches of your foot providing maximum comfort.
For more information of ja202# polyurethane resin, pls feel free to contact amber
Tel: +86-0755-89311348
Mob: +86-18938867544
Skype: amberqu2
Email: hyresin@outlook.Com