Including retro-reflective and opposed types
Long-distance detection, retro-reflective type: max 16m, opposed type: max 200m
Aspheric surface optical lens, high anti-light interference performance
A/B frequency overcome the cross interference among difference groups
Strong infrared light penetrating power
Protection rating: IP67 (IEC)
IM18 series proximity switch
Standard sensing object : 18X18X1 (Fe360 carbon steel)
Sensing distance: flush type: 5mm±10%; no-flush type: 8mm±10%
Hysteresis : 15%
Setting distance: flush type: 0-4mm; no-flush type: 0-6.4mm
Supply voltage: 10-30V DC
Un-load current: Max.6mA
Voltage drop: Max.1.7V
Switch frequency: flush type: 350Hz; no-flush type: 300Hz
Control output: transistor output
Output model: DC-2 wires
Resistive load: M
Pmf50r photoelectric sensor
Model Pmf50r-rf
Sensing type Retro-reflective
Sensing object Min dia 60mm opaque object
Sensing distance Rp04:0.1~7m; rp05:0.1~4.5m
Supply voltage 10-30vdc
No-load voltage Max.60ma
Cable standard Dia 5.5x 0.2
Accessory Bracket: ib02, screw : m4*25
40 pieces in one 40*40*30 carton
Pmf50r photoelectric sensor
Model Pmf50r-rf
Sensing type Retro-reflective
Sensing object Min dia 60mm opaque object
Sensing distance Rp04:0.1~7m; rp05:0.1~4.5m
Supply voltage 10-30vdc
No-load voltage Max.60ma
Response time Max.20ms
Ambient humidity 35~85%rh
Material Housing: abs; lens: pmma
Protection rating Ip67(iec)
Cable standard Dia 5.5x 0.2
Accessory Bracket: ib02, screw : m4*25
Note: the sensing distance of retro reflective sensor is measured on rp05 basis. (reflector varies according to sensing distance
40 pieces in one 40*40*30 carton
GVD301 vehicle loop detector
Type: single channel
Supply Voltage: 220V AC±10%
Sensing range:20-1500µH
Sensitivity: 0.02%-0.2% (7 degrees adjustable)
Response time: 50ms
Frequency: 2 degree adjustable, 15-120khz
Output: 2 output relays (5A/AC230V) Relay 1: presence relay; relay 2: pulse/fault relay;
CH1: presence relay; CH2: presence relay
Working mode: Model: presence & pulse relay output; Model 2: presence & fault relay output
Presence mode: Limited presence/permanent presence
Pulse mode: pulse entry/ pulse exit;
Pulse output time: pulse entry 200ms, pulse exit 200ms
Presence output time: 30mins limited presence/permanent presence;
Indicator: red: power, green: status indicator;
Internal protection: loop isolation transformer, voltage-regulator tube, voltage dependent thermistance;
Temperature:-40—80 centigrade
