5. Installed horizontally and vertically without using any soeciao tools.
6. Excellent mechanical properties
7. No brittlement at low temperature
8. Good slippery and frictional properties
9. Exellent electrical insulation
10. Resistance to chemical corrosion
11. Torque range from 2.94um to 1087.8um
For request
Specificationsciclz type drum shape gear coupling
m shaped tooth type coupling drum shaped tooth surface make within, and outside tooth of contact conditions are improve, avoid has in corner displacement conditions xia straight tooth tooth end edges side extrusion, stress concentrated of disadvantages, while improve has tooth surface friction, and wear situation, reduced has noise, maintenance cycle long. 4, outside the drum shape teeth-formula shaft coupling gear teeth is trumpet shaped, inner and outer gear assembly and disassembly is easy. 5, drum shape teeth-formula shaft coupling transmission efficiency as high as 99.7%. Scripture-based features, now widely at home and abroad to drum gear replace gear type coupling.
For request
Ntroduction
Flexible pin coupling is the made of certain non-metallic material elastic pin, placed two coupling halves flange holes through pins to achieve two half coupling connection.
Specifications hl flexible couplings
4. Low noise
5. Transmission efficiency loss, long useful working life.
For request
Specifications
1. Model: ngcl1-ngcl14
2. Nominal torque: 355-100000
6. Rich experience working with big companies in this field
7. Iso9001 certified
Features:
1. Widely used in various mechanical and hydraulic fields
2. Low-cost maintainance
3. Compensation for axial, radial and angular misalignment
4. Convenient axial plugging assembly
5. Installed horizontally and vertically without using any soeciao tools.
6. Excellent mechanical properties
7. No brittlement at low temperature
8. Good slippery and frictional properties
9. Exellent electrical insulation
For request
Specifications
1. Model: Wgp1-wgp14
4. Best After-sale Service
5. Always Responsible And Reliable
6. Rich Experience Working With Big Companies In This Field
7. Iso9001-2008 Certified
Features:
1. Widely Used In Various Mechanical And Hydraulic Fields
2. Low-cost Maintainance
3. Compensation For Axial, Radial And Angular Misalignment
4. Convenient Axial Plugging Assembly
5. Installed Horizontally And Vertically Without Using Any Soeciao Tools.
6. Excellent Mechanical Properties
7. No Brittlement At Low Temperature
8. Good Slippery And Frictional Properties
9. Exellent Electrical Insulation
For Request
Roller chain coupling introduction:
The chain coupling is composed a duplex roller chain and two sprockets. The function of connection and datachment ations. Applications include power transmission to industrial equipment such as pumps, gear boxes, compressors, blowers, mixers, and conveyors.
Specifications
1. Protective cover and o-rings included
2. Model: gl1-gl15
3. High flexibility
4. Iso9001
5. Double rolling chains are gb standard chain
6. The cover size is designed by your requirement
7. The converse transmissiom is overload compact is prohibit construct is simple, it is convenient to knocked-down
Our coupling details:
1. Material: stainless steel, c45 steel, aluminum, rubber and plastic etc.
2. Oem and odm are available
3. High efficient in transmission
4. Finishing: blacken, phosphate-coat, and oxidation.
5. High quality with better price
6. Different models suitable for your different demands
7. Stock for different bore size on both sides available.
8. Application in wide range of environment.
9. Quick and easy mounting and disassembly.
10. Resistant to oil and electrical insulation.
11. Identical clockwise and anticlockwise rotational characteristics.
12. Small dimension, low weight, high transmitted torque.
13. It has good performance on compensating the misalignment
For request
Diaphragm-type flexible coupling uses flexible metallic components to deliver torque from the driver to the follower as well as to compensate the relative displacement between 2 axes in 3 directions. It boasts advantages like big
3. Long life service.
4. Operating at high temperatures(less than 300oc) in adverse environmental conditions, such as corrosive environments.
5. Accommodate axial and angular misalignments, absorb and isolate vibration.
6. Simple construction, operating with high reliability.
7. No. Noise, zero backlash. Constant speed and no lubrication.
8. Less additional load on connecting equipment.
Specification:
1) torque range: 9.8n. M - 173830n. M
2) allowable speed n= 2000-20000 r/min
3) finish bore available from 5~290mm
4) available double disc coupling, the spacer can accord with customer-side.
4) forged #45 steel raw material for the hub, and stainless steel material for disc.
5) the disc coupling is a drive unit which uses the flexible disc to transfer the torque
6) the coupling has heat-resisting, corrosion-resisting, lubrication-free, long service life
7) it can be almost used in all power transmission. Easy to use, power-saving, environmental protection
For request
Model: gsl-z200 to gls-z760
Nominal torque: 31500-1600000n. M (31.5- 1600 kn. M)
Bore length: 710-1920mm
Outer dimeter: 200-760mm
All of our couplings are wildly used in metallurgy industry, iron & steel industry, petroleum industry, chemical industry and paper making, such as metal machinery, rolling mills, mill machines, cranes, non ferrous metal, oil machinery, and plastic machines.
If you have any requirement, please make a definite declaration.
We will make a specific product solution designed for you based on the data and drawings you have provided or on the written agreement between us and relevant technical documents and data.
For request
Summary of cardan joints: we produce cardan joint couplings with over 20 years experience in china, and enjoyed good international reputation around the world.
Applications: applied to rolling mill, lifting machine, construction machinery, paper machinery, roll guard, tube mill line and other heavy machines.
Structure and design:
Type code designation figure
Bh standard flexible welded type
andard.
Technical information:
1. Model: swc type of cardan shafts joint couplings with telescope length
2. Transfer nominal torque tn: 2.5kn. M - 12000kn. M
3. Rotary diameter: 100 - 1320mm
4. The axis folding angle: 0~25 degrees
5. Color: red/orange/yellow, etc
6. Certificate: iso
7. Our experience: over 20 years manufacture experience for kardan shaft couplings
8. Payment term: t/t or l/c, 30% for advanced desposit
9. Delivery time: 20 ~60 days
10. Warranty: 1 year
11. Spare parts: available
For request
Spider coupling/jaw coupling/couling with elastic spider
ue.
2. Getting the drive vibration buffer, and absorbing the impact generated by motor's uneven operation
3. Effectively correcting the installation deviation of axial and radial and angular
4. Coupling assembled by pressing a polyurethane sleeve into hubs on both sides
5. Oil resistance and electrical insulation
6. Identical clockwise and anticlockwise rotational characteristics
7. Three different rigidity sleeves available.
Jaw coupling application:
Servo systems, main spindle transmission, lift platform machine transmission, gearbox motor etc.
Features of jaw coupling:
Compact, zero backlash, three different spiders are available, absorbing shock, compensating the deviation in radial, angle and axle; simple structure, easy checking and maintenance, oil resistance and electrical insulation
Foxslide oem service:
1. With keyway or without keyway
2. The material: aluminum or stainless steel and so on, just follow your requirements
3. Coupling are available according to your drawing and technical requirement.
4. Exclusive and unique solution can be provided to our customer by experienced engineers and sales staff.
For request
Our company can provide the most satisfactory oem casting and machining products according to customers' drawings and requirements.
We produce various classes of castings in grey iron, ductile iron, malleable iron, carbon steel, alloy steel, and other metals.These castings are intended for construction and engineering use.
If you have any question or need any help, please do not hesitate to contact us.
Cylinder parts, pump accessories, valve parts and other components
Production capability:
(1) surface roughness: ra0.8-3.2
(2) weight: ranging from 200g to 2000kg
(3) machining tolerance: ¡¨¤0.005mm
(4)surface finish: polishing, oiled (rust-prevented), zinc-plated, nickel-plated, chrome-plated, hot-galvanized, sandblasting, painting, powder-coating, etc.
(5) casting process: sand casting, die casting, investment casting, precision casting, lost wax casting
Processing equipments:
Cnc machining center and nc turning, milling, drilling, grinding, boring, threading and welding machines.
Inspection:
(1) inspection: in-house and third party
(2) inspection tools:
Hardness tester, spectrometer, ultrasonic detector, metallographic analyzer, carbon sulfur analyzer ; height gauge, depth gauge, outside diameter gauge, venire caliper, etc.
Wooden package or as requirement
