This balls and valve seats are comprise of tungsten carbide (WC) and Co or Ni in high temperature sintering.With high hardness, better wear-resistant, high-temperature corrosion -resistant and maching properties of high working accuracy.high finish etc. Widely supplied ball-rolling element in bearing industry, pump valve spool for fluid seal, check valve for pretroleum digger etc.also used in high-tech area in army and civil.
The specification can be made upon customer' s requirements
Tungsten carbide sleeve bushing can position or protect the shaft on the rotating shaft to prevent shaft wear. Meanwhile, the hardness of the grinding shaft is low. The shaft without quenching and tempering treatment can be used, thus reducing the processing difficulty of related parts. Our axle sleeves has the advantages of strong wear resistance, small friction coefficient, good toughness and long service life .
Note: Other specification can be made upon customer's requirements.
This balls and valve seats are comprise of tungsten carbide (WC) and Co or Ni in high temperature sintering.With high hardness, better wear-resistant, high-temperature corrosion -resistant and maching properties of high working accuracy.high finish etc. Widely supplied ball-rolling element in bearing industry, pump valve spool for fluid seal, check valve for pretroleum digger etc.also used in high-tech area in army and civil.
The specification can be made upon customer' s requirements
Supply all kinds of Super shot tungsten bearing ball---From chengdu woco carbide
Tungsten carbide cobalt sintered and crushed powder is high hardness coating powder.The sintered and crushed morphology generally produces a higher coating density compared to agglomerated and sintered powders.It offers dense, excellent bonding and provides resistant to abrasion erosion and sliding wear . The coating also has high wear resistance but with low coefficient of friction.
Quick Details
Place of Origin:
Sichuan, China
Brand Name:
WOCO
Model Number:
CDW-5
Alloy Specification:
WC12Co
Particle:
-45+15um
process:
agglomerated&sintered
Color:
dark gray
Ct:
5.4-5.8
Co:
11.5-12.5
Fe:
â?¤0.5
others:
â?¤0.1
W:
Balance
Apparent Density:
4.8-5.3g/cm3
Hall Flowability:
18s/50g
Wire drawing is a metalworking process used to reduce the cross-section of a wire by pulling the wire through a single, or series of, drawing die(s). There are many applications for wire drawing, including electrical wiring, cables, tension-loaded structural components, springs, paper clips, spokes for wheels, and stringed musical instruments.
Our drawing dies are made of high purity tungsten powder the size area are 20% longer than common mould,these factors make sure our wire drawing dies can work longer!
we can also produce the following types:Z11,w.v.s13,S12,S10,S01,L,13,11
Note: Other specification can be made upon customer's requirements.
Wire drawing is a metalworking process used to reduce the cross-section of a wire by pulling the wire through a single, or series of, drawing die(s). There are many applications for wire drawing, including electrical wiring, cables, tension-loaded structural components, springs, paper clips, spokes for wheels, and stringed musical instruments.
Our drawing dies are made of high purity tungsten powder the size area are 20% longer than common mould,these factors make sure our wire drawing dies can work longer!
we can also produce the following types:Z11,w.v.s13,S12,S10,S01,L,13,11
Note: Other specification can be made upon customer's requirements.
custom all kinds of tungsten carbide wire drawing die, based on your drawing.
Tungsten carbide gripper jaws are tools used to clamp and hang the casing string during the drilling process. They are used to clamp or place between the casing of the drill pipe. They are used to tighten and hang the casing string and oil string in the well to prevent them from falling into the well.
Note: Other specification can be made upon customer's requirements.
Quick Details
Customized support:OEM
Place of Origin:Sichuan, China
Brand Name:WOCO
Material:Tungsten Carbide
Dimensions:
15*5.1*0.65mm
Grade:YG6X
TRS: 1700N/MM2
Hardness: 92HRA
Density:14.9g/cm3
Grain size:1. m
Application:for Surgical Needle Holders and Forceps
Surgical forceps or needle holder forceps made of stainless steel, with cemented carbide inserts on the head. According to different purposes, there are many specifications and models. Has good clamping performance and corrosion resistance.
Mainly used for holding needles and sutures during surgery.
Note: Other specification can be made upon customer's requirements.
Tungsten carbide cobalt sintered and crushed powder is high hardness coating powder.The sintered and crushed morphology generally produces a higher coating density compared to agglomerated and sintered powders.It offers dense, excellent bonding and provides resistant to abrasion erosion and sliding wear . The coating also has high wear resistance but with low coefficient of friction.
Tungsten carbide spray nozzles are made by combining a straight hole and a limiting hole. There is a radius of curvature design at both ends. This design can ensure a smooth flowing through the nozzle body. Carbide nozzles are extensively used in sand blasting and shot blasting equipment. We provide a range of tungsten carbide spray nozzles of various sizes made in both standard and custom configurations.
â?³Characteristics:
(1) Ultra wear resistant
(2)Low pushing force
(3)Faster speed
(4)high precision
(5)high temperature resistance,
Other specification can be made upon customer' s requirements
Product Description
Tube drawing die is mainly used for drawing copper tube, steel tube and other pipe materials, usually use together with floating plug, tube drawing die control outer diameter size of tube, floating plug control inner diameter size of tube. Our drawing dies are made of high purity tungsten powder the size area are 20% longer than common mould,these factors make sure our wire drawing dies can work longer !
we can also produce the following types S20 21 S22 23 30-31E.
Note: Other specification can be made upon customer's requirements.
Tungsten carbide cobalt sintered and crushed powder is high hardness coating powder.The sintered and crushed morphology generally produces a higher coating density compared to agglomerated and sintered powders.It offers dense, excellent bonding and provides resistant to abrasion erosion and sliding wear . The coating also has high wear resistance but with low coefficient of friction.
Common technical parameters co ct ti
6-8% 6-5.8% <2%
Common specifications
£¨mesh£© 6-8 10-12 12-20
Hvof spray, air plasma spray, explosive spray
All kinds of grade for the rods are supplied.
The component of yg6 tc-balls
Grade component hardness density
Applications: yg6 tc-balls all is widely used in a variety of hardware industry, valves, bearings, die-casting, punching parts, grinding, measuring.
Features: the main components are tungsten-cobalt alloy (wc-co) with a high hardness, hra90-92, abrasion resistance is better,
Its wear resistance is hundreds time previous to steel balls
The component of yg6x tc-balls
Grade component hardness density
Bending strength porosity analysis
Wc co hra g/cm3 g/�o
Yg6x 94% 6% 92 14.6-15.0
1450 a02b02c02
Applications: yg6x carbide ball is widely used in a variety of hardware industry, valves, bearings, die-casting, punching parts, grinding, measuring,
Chemical, petroleum, and military.Features: the main components are tungsten-cobalt alloy (wc-co) with a high hardness it is a fine-grained alloy.
It��s hardness and wear resistance is a little better than yg6x alloy balls, but it��s toughness is slightly lower than the ball of yg8,
So it is suitable for production of wear-resistant alloy and impact-resistant parts
The component of yg8 tc-balls
Grade component hardness density
Bending strength porosity analysis
Wc co hra g/cm3 g/�o
Yg8 92% 8% 89 14.4-14.8
1800 a02b02c02
Applications: yg8 carbide is widely used in ball valves, bearings, die-casting, punching parts, grinding, measuring, hardness tester, petroleum, chemical, aviation and aerospace.
Features: the main components are tungsten-cobalt alloy (wc-co) with a high hardness and wear resistance, it��s toughness is better than yg6 alloy ball and has good anti-vibration shock engaged in the performance, suitable for production of strong shock and vibration components
Stable and trustable quality;
Made from 100% virgin raw material;
All products go through in-process and final inspection;
Free online technical service available;
Grade density hardness t.R.S( mpa) application
Yg6 14.9 91.0 hra 2350
Yg8 14.7 89.5 hra 2350
All raw material are tested in terms of density, hardness and t.R.S before use.
There are strict inspection on process and final products.
Every batch of product can be traced
Tungsten carbide gripper jaws are tools used to clamp and hang the casing string during the drilling process. They are used to clamp or place between the casing of the drill pipe. They are used to tighten and hang the casing string and oil string in the well to prevent them from falling into the well.
Note: Other specification can be made upon customer's requirements.
Tungsten carbide gripper jaws are tools used to clamp and hang the casing string during the drilling process. They are used to clamp or place between the casing of the drill pipe. They are used to tighten and hang the casing string and oil string in the well to prevent them from falling into the well.
Note: Other specification can be made upon customer's requirements.
Wire drawing is a metalworking process used to reduce the cross-section of a wire by pulling the wire through a single, or series of, drawing die(s). There are many applications for wire drawing, including electrical wiring, cables, tension-loaded structural components, springs, paper clips, spokes for wheels, and stringed musical instruments.
Our drawing dies are made of high purity tungsten powder the size area are 20% longer than common mould,these factors make sure our wire drawing dies can work longer!
we can also produce the following types:Z11,w.v.s13,S12,S10,S01,L,13,11
Note: Other specification can be made upon customer's requirements.---chengdu woco carbide
Supply all kinds of Tungsten heavy alloy ball WNiCu ---From Chengdu woco carbide
Tungsten carbide tubing can be used to
1. Manufacturing integral carbide cutting tools.
2. Processing general steel, cast iron, stainless steel, heat resistant steel, nickel base and titanium alloy and other materials.
3. Make twist drills, end mills, taps, gun drills and other general tool materials
Note: Other specification can be made upon customer's requirements.
This tungsten carbide grit also called tungsten grits, carbide grits, it is used to welding or solder onto a steel body, to
increase the wear resistance properties. For example, if a steel cutter can cut 24 hours without grits, it will cut 240 hours after with the tungsten carbide grits.
Tungsten carbide gripper jaws tips are tools used to clamp and hang the casing string during the drilling process. They are used to clamp or place between the casing of the drill pipe. They are used to tighten and hang the casing string and oil string in the well to prevent them from falling into the well.
Note: Other specification can be made upon customer's requirements.
Suppliy all kinds of tungsten carbide ring roller---from Chengdu woco carbide
Supplier all kinds of tungsten carbide powder
This tungsten carbide grit also called tungsten grits, carbide grits, it is used to welding or solder onto a steel body, to
increase the wear resistance properties. For example, if a steel cutter can cut 24 hours without grits, it will cut 240 hours after with the tungsten carbide grits.
Material
Tungsten carbide
Product name
Tungsten carbide inserts
Material grade
YG6
Hardness
90-91HRA
Density
14.9 g/cm3
TRS
1800N/MM2
Finished
customized
Tolerance
customized
Wire drawing is a metalworking process used to reduce the cross-section of a wire by pulling the wire through a single, or series of, drawing die(s). There are many applications for wire drawing, including electrical wiring, cables, tension-loaded structural components, springs, paper clips, spokes for wheels, and stringed musical instruments.
Our drawing dies are made of high purity tungsten powder the size area are 20% longer than common mould,these factors make sure our wire drawing dies can work longer!
we can also produce the following types:Z11,w.v.s13,S12,S10,S01,L,13,11
Note: Other specification can be made upon customer's requirements.
Tungsten carbide roll ringsare rolls made of tungsten carbide and cobalt and other materials using powder metallurgy methods. There are two types of carbide rolls: integral and combined. Superior performance, stable quality, high precision product processing, good wear resistance and high impact resistance
Other specification can be made upon customer' s requirements
