EA16 is the extension of EA15 product design, inherited the EA15 wide voltage detection range and power supply voltage, and enhanced the generator as the parallel performance when using parallel system, in addition to current compensation input by the user can choose 1A or 5A than CT input number, can be provided by the system to an analog signal change the terminal voltage of generator. EA16 in the protection of increase of over excitation voltage protection, the protection to prevent detection power disconnection and generator excitation is abnormal, the protection function can also be removed. EA16 / EA16-400Hz (detection voltage 400Hz) universal 16Amp parallel generator automatic voltage regulator compatible models: Marelli, Caterpillar, Khenkikian, Genaust and other brands of AVR
* this page AVR the name of the manufacturer, type is only for reference, this page product is not the original products, AVR products but consistent with the original products
Product features
Voltage regulation rate < ¡À 0.5%?
Application of VAC? 170~510 brushless generator
Can be used in parallel unit?
? 16 ADC output current
Application of 50/60 Hz? EA16 frequency, EA16-400Hz frequency of 400 Hz
? with low-frequency protection and voltage slow up function
? with load current compensation, analog voltage input function
Product specifications
The product model
EA16 / EA16-400Hz*
Detection of input
Voltage: 170~510 VAC single-phase two-wire
Frequency: 50/60 Hz
The frequency of *EA16-400Hz: 400 Hz
Power input
Voltage: 60~300 VAC single-phase two-wire
Field output
Voltage: 240 VAC input, 90 VDC
Current: continuous discontinuous 16A 20A for 10 seconds
Resistance: a minimum of 6 Ohm @ 35 VDC
The external voltage adjustment
¡À 0.5% (engine speed variation in 4%)
Voltage is established
In the AVR input terminal to remanence voltage above 5 VAC
The external voltage adjustment
With 2 K Ohm 1 watt potentiometer is ¡À 5%
Power consumption
A maximum of 10 Watt
Temperature stability
Every C change, 0.03% voltage drift
Low frequency protection
55 Hz @ 60 Hz, 45 Hz @ 55 Hz (adjustable)
*EA16-400Hz: 360 Hz (adjustable)
Current compensation input
1A or 5A (optional)
Analog voltage input
¡À 5 VDC ¡À 10% AC @ 3 VDC
Work environment
Operating temperature: -40~70 degrees C
The storage temperature: -40~85 degrees C
Relative humidity: 95%
Vibration: 3.3G @ 100~2 KHz
Characteristics of the adjusting knob
VOLT: adjusting voltage
STAB: adjust stability
U/F: adjust the low-frequency protection point
DROOP: adjust current compensation voltage drop
TRIM: analog voltage effect of ratio adjustment
Size
Unit Type:piece Package Weight:1.000kg (2.20lb.) Package Size:19cm x 18cm x 17cm (7.48in x 7.09in x 6.69in)
3 analog input, can be used for pressure, temperature and oil level measurement, and built a variety of sensor selection, can be custom parameters.
More can define auxiliary control relay output.
More can be defined isolation switch input.
The controller panel button is used to select the control mode, start and stop running the program, data display and running protection parameter modification, led indicator for running state indicating the mode of the controller and the generator, lcd display of the measurement parameters and state.
Flexible adaptation of rs485, rs232 or usb communication interface, remote monitoring, through communication with the pc, fully realize the remote communication, telemetry, remote control function, operation parameters and can be read out and set the controller.
Unit type:piece package weight:1.500kg (3.31lb.) package size:20cm x 18cm x 17cm (7.87in x 7.09in x 6.69in)
Is_customized:yes brand name:woodward model number:8270-1029 place of origin:china (mainland)
Unit type:piece package weight:0.500kg (1.10lb.) package size:15cm x 15cm x 6cm (5.91in x 5.91in x 2.36in)
The ems39 is an integrated genset controller which incorporates full engine protection, lcd display of engine temperature, oil pressure, battery volts, speed and genset hours, provides manual start and stop buttons, autostart, and controls excitation of the battery charging alternator.
Low cost
Fully sequenced starting and stopping with retries
Lcd display of starting and running sequence icon alerts against low oil pressure, high engine temperature, low battery volts, excitation failure, high/low engine speed preheat output (if any) starts the engine easily under cold environment
Run output (if any) activates on successful engine start and controls load
Alarm output (if any) in the event of abnormal operation
Autostart imput allows remote control start
Speed detection directly from generator, mpu or alternator output
Nput can be external shutdown for emgency stop
Unit type:piece package weight:0.102kg (0.22lb.) package size:20cm x 20cm x 5cm (7.87in x 7.87in x 1.97in)
Dse5510 is an automatic engine control module, is designed to provide advanced load distribution function, used for diesel and gas turbine, including electronic and non electronic engine. The module also provides engine monitoring and protection function well.
Synchronization function of these modules including, with built-in synchronizer for automatic synchronization, and switching to non electric pump. Provide from direct and flexible output module, to allow the connection to the governor on the most commonly used and the automatic voltage regulator (avr). This module is designed to combine up to 16 generators, and 16 and up to the power of 20, in one system, for example: 16 generators and 4 electric (dse5560 must be synchronized with the power)
Unit type:piece package weight:2.000kg (4.41lb.) package size:18cm x 18cm x 18cm (7.09in x 7.09in x 7.09in)
