TID POWER Fall Restraint (Anchor Point Tool) adopts moisture-proof small-mouth closed-cell foam filled high-strength epoxy glass fiber tube as the insulating body, equipped with U-shaped hanging ring, and light weight and high-strength aviation aluminum pole base and nylon ratchet holding rod locking system. This product can be used to fix the safety belt of line workers, and connect the anti-dropping device or light industrial equipment.
Features:
The design meets the load of 250kg, and the insulation distance is 160mm;
Large U-shaped bolts are convenient for the operator to pass through the lifting ring easily;
50mm*1300mm nylon belt ratchet assembly can be quickly and easily connected to the pole.
The portable earth sets are designed for using to protect workers from high voltage electric shock. Suitable for making power failed equipments or temporary short-circuited lines grounded, preventing unexpected power to intrude in and do damage to personnel and equipments
Product characters:
A) The hook use aluminium alloy compression casting
B) Stick use the light epoxy fiberglass manufacture, excellent performance of electric conduction
C) Earthing wire made of pure copper wire
D) The temperature scope for protective cover :+40 C.
1.Product Type:
Surge arrester can be divided into many types according to its application as below:
Distribution type,power station type,protecting capacitor type,transformer neutral point type ,protecting motor type,electrified railway type,line type.etc.
Line type surge arrester can be divided into series spacing type and without spacing type and in series spacing type can be divided into supporting spacing and sure air spacing type.
2.Main Product Features:
2.1It has a series of outstanding features such as good protection performance,high circulating capacity ,less reaction time,smooth steep-wave characteristic.
2.2 Excellent silicon rubber material is used in composite housing,possessing good anti-tracking and ageing-resistant performance as well as good hydrophobicity ,ion transferring and high pollution proof.
2.3 Special technique and internal structure are used in composite housing surge arrester,possessing higher technical strength and good explosion-proof performance.
3.Service Conditions:
3.1 Ambient Temperature: - 40 + 50
3.2 Altitude: 1000m;
3.3 Frequency : 48 Hz , + 50 Hz;
3.4 Power Frequency Voltage exerted long-time on surge arrester shall not exceeds continuous operation voltage;
3.5 Earthquake intensity is not more than 7 grades;
3.6 Wind speed is not more than 35mm/s;
Usage under exceptional conditions shall be negotiated by both parties.
1.Product Type:
Surge arrester can be divided into many types according to its application as below:
Distribution type,power station type,protecting capacitor type,transformer neutral point type ,protecting motor type,electrified railway type,line type.etc.
Line type surge arrester can be divided into series spacing type and without spacing type and in series spacing type can be divided into supporting spacing and sure air spacing type.
2.Main Product Features:
2.1It has a series of outstanding features such as good protection performance,high circulating capacity ,less reaction time,smooth steep-wave characteristic.
2.2 Excellent silicon rubber material is used in composite housing,possessing good anti-tracking and ageing-resistant performance as well as good hydrophobicity ,ion transferring and high pollution proof.
2.3 Special technique and internal structure are used in composite housing surge arrester,possessing higher technical strength and good explosion-proof performance.
3.Service Conditions:
3.1 Ambient Temperature: - 40 , + 50 ;
3.2 Altitude: 1000m;
3.3 Frequency :48 Hz , + 50 Hz;
3.4 Power Frequency Voltage exerted long-time on surge arrester shall not exceeds continuous operation voltage;
3.5 Earthquake intensity is not more than 7 grades;
3.6 Wind speed is not more than 35mm/s;
Usage under exceptional conditions shall be negotiated by both parties.
Drop out fuses and load-drop fuses are outdoor high voltage protection appliances. It is installed on the high voltage side of the distribution transformer or on the branch line of the distribution line. used as a short circuit of the transformer and the line, overload protection and split load current.
The drop fuse is composed of two parts:
An insulating bracket and a fuse tube. The static contact is installed at two ends of the insulating bracket, the movable contact is installed at both ends of the fuse tube, and the fuse tube is composed of an inner arc extinguishing tube and an outer layer.
It consists of a phenolic paper tube or an epoxy glass tube. The load drop fuse enhances the elastic auxiliary contact and the arc extinguishing cover to divide and combine the load current.
Product use environment:
1. The ambient temperature is not higher than +40 C, not lower than-40 C
2.The altitude does not exceed 3000m
3.The maximum wind speed does not exceed 35m/s
4.The earthquake intensity does not exceed 8 degrees
Product Character:
1,High mechanical strength
2,Good pollution resistance performance
3,Acid and alkalis resistance
4,Good brittle resistance
5,Easy to install
1.Polymer Insulator Character:
1.1High mechanical strength;
1.2Good performance of hydrophobicity and anti-pollution;
1.3 Excellent electrical Performance;
1.4 Small volume and light weight.
2.TID polymer Insulator Character:
2.1 We adopt the advanced injection producing technology for housing and the design of the shed adopt unique aerodynamics principle.
2.2 Good Raw material :
We use HTV silicone rubber which hydrophobicity can reach to HC1 level
We use hot dip Galvanizing steel fitting ,the thickness of the zinc more than 100 m.
We use ECR rod as the core which is high acid resistant. 7200Hr testing passed .
2.3 Special marking design.
We use the double seal design between the rubber and the fitting.
We can mark your logo on the fitting or rubber.
2.4 Excellent Manufacture Technology:
Perfect match between fitting and rod
With imported end-fitting crimping equipment ,ensures the mechanical performance of the product
Perfect bound between silicone rubber and the rod.
2.5 The unique end fitting sealing structure improves product sealing reliability
2.6 The strict inspection measures ensure the perfect quality of every product.
Product Advantages:
1.Light weight
It is small in size and in light weight, it is about 1/5 to 1/9 of the porcelain insulator in the same grade voltage, so itâ??s convenient for transportation and installation.
2.Good Anti-pollution
Composite insulator has a good anti-pollution performance, so it can operate safely in polluted area, it requires neither annual cleaning or maintaining at zero.
3.High Anti-fouling property
Good aging resistance performance, strong ability of anti-pollution flashover and good electric corrosion resistance, can ensure that the internal insulation core will not be affected by moisture.
4..Strong shock resistance
Composite insulators have good brittleness resistance, strong shock resistance and there no brittle fracture accident. Composite insulators are interchangeable with ceramic.
5.Stable Performance
The composite insulator has high mechanical strength, reliable structure and stable performance, which provides a guarantee for the safe operation of the line.
Product Features:
Online measurement of AC current below 60kV (operate with insulated rod above 600V).
Features
1. The unique U-shaped opening structure realizes unobstructed measurement, which is particularly convenient for on-site measurement.
2. Suitable for high current test, range: 0.00A~9999A
3. It adopts wireless transmission mode, and the transmission distance is 100m.
Data retention function, data storage function.
Pole Mounted Support Arm With Ratchet Binder And Nylon Strap
Safety Ratchet Binder and Nylon Strap eliminates hazards of chains and chain tighteners when being used in primary voltage areas
Installation and removal of arms is quick and easy
Ratchet Binder has extra wide handle for easy operation when wearing rubber gloves
50mm wide nylon strap is 1300mm long to accommodate most structures
(Note: Periodic inspection of straps for wear is required.)
Insulating Solid Rod is made of ECR glass reinforced epoxy resin.We use continuous pultrusion procss .The products fullfill The standard of IEC61109.Insulator core rods also are also called fiberglass rod,FRP rod,GRP rod,fiberglass bar,Insulation rod,fiberglass stick and so on.
1. Standard: IEC61109
2. Material: E glass and epoxy resin.
3. Process: Continuous pultrusion.
High Strength Epoxy Resin Fiberglass Cross Knitting+ Pultrusion Insulation Tube was widely used for the live line tools and other insulation parts which need the better electrical performance and light weight.
1. Standard: GB13398-2008 , IEC 60855.
2. Material: Fiber glass and epoxy resin. Filled by close cell foam.
3. Process:Continuous knittingfiberglass + pultrusion.process.
The elescoping hot sticks have maximum convenience for the lineman because they permit him to perform many routine jobs from ground level. The universal end fitting on the insulated top section accepts a wide variety of attachments so the lineman can disconnect switches, replace cutout tubes and reclose, remove pole covers, prune trees, replace bulbs and complete many other overhead tasks. The sticks is as short as can easy carried on most trouble trucks.The spring-loaded plastic buttons that keep the extended tool sections securely locked in position. As each section is extended and twisted slightly, the buttons pop into place, allowing working to be done with complete control and confidence. 1.Applied Standard:IEC60855,ASTM F711. 2.Parts Material: Universal head with hook: aluminum alloy in nature color Tube : Top section: foam filled fiberglass tube in yellow,Other sections: fiberglass tube in yellow Handle: Insulation rubber in black Bag: water-proof Nylon bag.
Insulating Solid Rod is made of ECR glass reinforced epoxy resin.We use continuous pultrusion procss .The products fullfill The standard of IEC61109.Insulator core rods also are also called fiberglass rod,FRP rod,GRP rod,fiberglass bar,Insulation rod,fiberglass stick and so on.
1. Standard: IEC61109
2. Material: E glass and epoxy resin.
3. Process: Continuous pultrusion.
Process:
1 - Continuous roll of reinforced fibers/woven fiber mat
2 - Tension roller
3 - Resin Impregnator
4 - Resin soaked fiber
5 - Die and heat source
6 - Pull mechanism
7 - Finished hardened fiber reinforced polymer
Specifications:
1.Color: light green or brown.
2.Length: according to Customer requirement.
3. We offer customized products,including the new size, New surface treatment, Jointing the fitting, screw or mechanical.
Insulating Solid Rod is made of ECR glass reinforced epoxy resin.We use continuous pultrusion procss .The products fullfill The standard of IEC61109.Insulator core rods also are also called fiberglass rod,FRP rod,GRP rod,fiberglass bar,Insulation rod,fiberglass stick and so on.
1. Standard: IEC61109
2. Material: E glass and epoxy resin.
3. Process: Continuous pultrusion.
Process:
1 - Continuous roll of reinforced fibers/woven fiber mat
2 - Tension roller
3 - Resin Impregnator
4 - Resin soaked fiber
5 - Die and heat source
6 - Pull mechanism
7 - Finished hardened fiber reinforced polymer
Specifications:
1.Color: light green or brown.
2.Length: according to Customer requirement.
3. We offer customized products,including the new size, New surface treatment, Jointing the fitting, screw or mechanical.
Insulating profile is made of ECR glass reinforced epoxy resin.We use continuous pultrusion procss .The products fullfill The standard of IEC61109.Insulator core rods also are also called fiberglass rod,FRP rod,GRP rod,fiberglass bar,Insulation rod,fiberglass stick and so on.
1. Standard: IEC61109
2. Material: E glass and epoxy resin.
3. Process: Continuous pultrusion.
Process:
1 - Continuous roll of reinforced fibers/woven fiber mat
2 - Tension roller
3 - Resin Impregnator
4 - Resin soaked fiber
5 - Die and heat source
6 - Pull mechanism
7 - Finished hardened fiber reinforced polymer
Specifications:
1.Color: light green or brown.
2.Length: according to Customer requirement.
3. We offer customized products,including the new size, New surface treatment, Jointing the fitting, screw or mechanical.
Insulated rescue hook is used to evacuate injured workers from dangerous areas. Insulated rescue hook must be installed near confined space, vault, electrical cabinet and switch gear.
1.Material: fiberglass
2.Character:
Used to withdraw an injured worker out of a hazardous area
Telescopic FRP insulated tube can be easily adjusted and operated
This is a simple, easy to use, portable glove inflator. The inflator provides a quality means of inspecting gloves in the field. The glove is secured to the inflator using a nylon strap and fastened with a hook and pile closure. Inflation is accomplished by pumping the bellows of the inflator against any surface.
Gloves should be expanded to no more than 1.5 times their normal size for Type I, and 1.25 times normal for Type II Salcor.Electrical insulating gloves must be inspected before each use. Inspection is simplified by using a portable glove inflator ,This glove inflator adapte for Class 00 and 0 and smaller size gloves.
Insulated Ladders are very safe for very high electrical and mechanical performance. Our products are Made of FRP material, high hardness, good impact resistance, strong load bearing capacity and good insulation. Use epoxy resin, use high temperature polymerization to draw, high strength, corrosion resistance, beautiful appearance, good insulation.
Main material
Frame : Foam filled fiberglass tube in orange or yellow.
Step: Foam filled fiberglass tube in orange or yellow
Strengthen Bar: Foam filled fiberglass tube in orange or yellow.
Hook or other Joint accessories: Stainless steel
Moving wheel: High strength metal + Nylon
Rope: Insulation Nylon rope.
Character:
Dielectrical Test: 30kV
Insulation Between Rungs:30kV
Anti Slip of Step
High Mechanical resistant to bending and twist
High Resistant to bad weather and corrosion element
Technical Detail:
Applied Standard:GB17620 & EN131
The ladder can be designed according to customer's requirement.
Note:
5.1 Please inspect the ladder main body and parts according to GB17620 or EN 131 before use it ,If there is any defects or crack ,Please donot use it.
52 Please follow the ladder and live line work operation regulation when use it.
5.3 Please protect the ladder avoid the damage and moisture which will affect the insulation level.
5.4 Please inspect the ladder every year regularly to guarantee the ladder in well condition.
6.Product assembly method:
Standard assembly, according to customer's request, in bulk.
Tid offer the full solution for the customer.We can design the stay insulator according to the customers requirement within the range below.
1.Applied standard:iec61109, gb19519-2004, jb/t8460-1996
2.Voltage range:10kv-500k
3.Tensile load range:50kn-430kn
4.Coating material: polytetrafluoroethylene , silicon rubber, insulating paint
5.Fitting type: ball , socket , tongue , clevis, eye type , y type and screw.
Insulating Solid Rod is made of ECR glass reinforced epoxy resin.We use continuous pultrusion procss .The products fullfill The standard of IEC61109.Insulator core rods also are also called fiberglass rod,FRP rod,GRP rod,fiberglass bar,Insulation rod,fiberglass stick and so on.
1. Standard: IEC61109
2. Material: E glass and epoxy resin.
3. Process: Continuous pultrusion.
a- Continuous roll of reinforced fibers/woven fiber mat
b - Tension roller
c - Resin Impregnator
d - Resin soaked fiber
e - Die and heat source
f - Pull mechanism
g - Finished hardened fiber reinforced polymer
Product Features:
Used for on-site high-voltage line inspection, identification of high-voltage system voltage level, inspection of high-voltage line faults, repair of neon lights, high-pressure sodium lamps, inspection of induced voltage, inspection of residual high voltage or induced voltage, etc.
Product Charactor:
1. Adopting non-contact induction technology, no need to touch the charged body, ensuring the safety of the operator.
2. Bright red LED and harsh buzzer sound and light alarm, easy to identify.
3.9 voltage levels cover various voltage levels. The voltage level can be customized according to user needs.
4. The self-check function ensures the accuracy of the electric test.
5. Protection level: IP65
Product Details:
Feature :
Height measuring rod is suitable for measuring the cross distance of power transmission , power transformation , power distribution line .Â
The head of the rod is hook shape.The middle connection controlled by spring button.
The rod with gauge lever in order to measure the height very exactly. Material is fiberglass epoxy resin.
Advantages:
1. Easy operation with push button
2. Flexibly structuredÂ
3. Good insulation properties
4. High mechanical strength
5. Multipurpose
6. Portable and endurable
Technical Parameter:
Length: 6m,8m,10m,12m,15m or as customer required
Voltage class: 10kV 35kV 110kV 220kV 500kV 750kV or as customer required
Application: Height of wire / tunnel / bridge / tree / cargo loaded / signboard