Liquid silicone rubber for gypsum molds
, it will not be operated.
Step three: pouring the mixture into the frame with original gypsum mold slowly .
Shelf life for liquid silicone rubber
10~12months, when stored in a dry & cool place under the room temperature 25.
Packing for liquid silicone rubber
1kg/ bottle , 5 kg/drum vacuumed packing, 25kgs/drum vacuumed packing, 200 kg/drum
25kg/drum 200kg/drum
Pad printing silicon rubber
Pad printing silicon rubber usages:
Pad printing silicone rubber is mainly use for printing irregular patterns on plastic toys, shampoo, pen, glass , electroplating toys and trade makers and so on .
Pad printing silicon rubber description
Pad printing silicone rubber as a carrier which transfer patterns on the steel plate to the toys products surface.
4) Permanent and durable
Pad printing silicon rubber operation instructions:
. Step one: take 100g of part a and add 2g of part b and mix the silicone rubber and curing agent evenly.
Step two: vacuum pumping
Without exception, this step takes less than 10 minutes.
Note: the time for vacuum-pumping should be less than 3¡a5 minutes , otherwise, once the silicone rubber has cross-link reaction during vacuum pumping process, it will not be operated.
Step three: pouring the vacuumed mixture into the original mold slowly,
Shelf life for pad printing silicon rubber
8~10months, when stored in a dry & cool place under the room temperature 25.
Packing for pad printing silicon rubber
20kgs/drum vacuumed packing
art b and mix the silicone rubber and curing agent evenly.
Step two: vacuum pumping
Without exception, this step takes less than 10 minutes.
Note: the time for vacuum-pumping should be less than 3¡a5 minutes , otherwise, once the silicone rubber has cross-link reaction during vacuum pumping process, it will not be operated.
Step three: pouring the vacuumed silicone mixture into the frame with original concrete mold .
Shelf life for silicon rubber concrete molds
10~12months, when stored in a dry & cool place under the room temperature 25.
Packing for silicon rubber for concrete molds
25kg/drum 200kg/drum
Without exception, this step takes less than 10 minutes.
Note: the time for vacuum-pumping should be less than 3¡a5 minutes , otherwise, once the silicone rubber has cross-link reaction during vacuum pumping process, it will not be operated.
Step three: pouring the mixture into the frame with original mold slowly .
Shelf life for platinum cure silicone rubber
8~10months, when stored in a dry & cool place under the room temperature 25.
Packing for platinum cure silicone rubber
20kg/drum for part a+ 20kg/drum for part b in one set
, 200 kg/drum for part a+ 200kg/drum for part b in one set
25kg/drum 200kg/drum
e less than 3¡a5 minutes , otherwise, once the silicone rubber has cross-link reaction during vacuum pumping process, it will not be operated.
Step three: pouring the mixture into the frame with original mold slowly .
Shelf life for silicon rubber for mold making
8~10months, when stored in a dry & cool place under the room temperature 25.
Packing for silicon rubber for mold making
20kg/drum for part a+ 20kg/drum for part b in one set
, 200 kg/drum for part a+ 200kg/drum for part b in one set
25kg/drum 200kg/drum
